* [PATCH v2 01/17] ARM: at91: Kconfig: add sam9x60 pll config flag
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 02/17] ARM: at91: pm: move SAM9X60's PM under its own SoC " Claudiu Beznea
` (16 subsequent siblings)
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Claudiu Beznea
Add SAM9X60's pll config flag. It was first used in
commit a436c2a447e5 ("clk: at91: add sam9x60 PLL driver").
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/mach-at91/Kconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index af41725fcc72..262b550d7329 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -154,6 +154,9 @@ config HAVE_AT91_AUDIO_PLL
config HAVE_AT91_I2S_MUX_CLK
bool
+config HAVE_AT91_SAM9X60_PLL
+ bool
+
config SOC_SAM_V4_V5
bool
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v2 02/17] ARM: at91: pm: move SAM9X60's PM under its own SoC config flag
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 01/17] ARM: at91: Kconfig: add sam9x60 pll config flag Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 21:28 ` Alexandre Belloni
2019-11-26 13:12 ` [PATCH v2 03/17] drivers: soc: atmel: move sam9x60 under its own " Claudiu Beznea
` (15 subsequent siblings)
17 siblings, 1 reply; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Claudiu Beznea
Move SAM9X60's PM part under SoC config flag. This allows the building
of SAM9X60 platform withouth depending on CONFIG_SOC_AT91SAM9 flag,
allowing us to select only necessary config flags for SAM9X60.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/at91sam9.c | 18 ------------------
arch/arm/mach-at91/pm.c | 2 +-
arch/arm/mach-at91/sam9x60.c | 34 ++++++++++++++++++++++++++++++++++
4 files changed, 36 insertions(+), 19 deletions(-)
create mode 100644 arch/arm/mach-at91/sam9x60.c
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index de64301dcff2..f565490f1b70 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -6,6 +6,7 @@
# CPU-specific support
obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o
+obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
obj-$(CONFIG_SOC_SAMA5) += sama5.o
obj-$(CONFIG_SOC_SAMV7) += samv7.o
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
index bf629c90c758..7e572189a5eb 100644
--- a/arch/arm/mach-at91/at91sam9.c
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -31,21 +31,3 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
.init_machine = at91sam9_init,
.dt_compat = at91_dt_board_compat,
MACHINE_END
-
-static void __init sam9x60_init(void)
-{
- of_platform_default_populate(NULL, NULL, NULL);
-
- sam9x60_pm_init();
-}
-
-static const char *const sam9x60_dt_board_compat[] __initconst = {
- "microchip,sam9x60",
- NULL
-};
-
-DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
- /* Maintainer: Microchip */
- .init_machine = sam9x60_init,
- .dt_compat = sam9x60_dt_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index d5af6aedc02c..56a6a49b19e2 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -805,7 +805,7 @@ void __init at91rm9200_pm_init(void)
void __init sam9x60_pm_init(void)
{
- if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
+ if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
return;
at91_pm_modes_init();
diff --git a/arch/arm/mach-at91/sam9x60.c b/arch/arm/mach-at91/sam9x60.c
new file mode 100644
index 000000000000..d8c739d25458
--- /dev/null
+++ b/arch/arm/mach-at91/sam9x60.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Setup code for SAM9X60.
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/system_misc.h>
+
+#include "generic.h"
+
+static void __init sam9x60_init(void)
+{
+ of_platform_default_populate(NULL, NULL, NULL);
+
+ sam9x60_pm_init();
+}
+
+static const char *const sam9x60_dt_board_compat[] __initconst = {
+ "microchip,sam9x60",
+ NULL
+};
+
+DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
+ /* Maintainer: Microchip */
+ .init_machine = sam9x60_init,
+ .dt_compat = sam9x60_dt_board_compat,
+MACHINE_END
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH v2 02/17] ARM: at91: pm: move SAM9X60's PM under its own SoC config flag
2019-11-26 13:12 ` [PATCH v2 02/17] ARM: at91: pm: move SAM9X60's PM under its own SoC " Claudiu Beznea
@ 2019-11-26 21:28 ` Alexandre Belloni
2019-11-27 8:06 ` Claudiu.Beznea
0 siblings, 1 reply; 25+ messages in thread
From: Alexandre Belloni @ 2019-11-26 21:28 UTC (permalink / raw)
To: Claudiu Beznea
Cc: linux, nicolas.ferre, ludovic.desroches, sre, linux-arm-kernel,
linux-kernel, linux-pm
On 26/11/2019 15:12:06+0200, Claudiu Beznea wrote:
> Move SAM9X60's PM part under SoC config flag. This allows the building
> of SAM9X60 platform withouth depending on CONFIG_SOC_AT91SAM9 flag,
> allowing us to select only necessary config flags for SAM9X60.
>
I'm really wondering, how much space does that really save?
The net benefit seems to be very small...
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
> arch/arm/mach-at91/Makefile | 1 +
> arch/arm/mach-at91/at91sam9.c | 18 ------------------
> arch/arm/mach-at91/pm.c | 2 +-
> arch/arm/mach-at91/sam9x60.c | 34 ++++++++++++++++++++++++++++++++++
> 4 files changed, 36 insertions(+), 19 deletions(-)
> create mode 100644 arch/arm/mach-at91/sam9x60.c
>
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index de64301dcff2..f565490f1b70 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -6,6 +6,7 @@
> # CPU-specific support
> obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
> obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o
> +obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
> obj-$(CONFIG_SOC_SAMA5) += sama5.o
> obj-$(CONFIG_SOC_SAMV7) += samv7.o
>
> diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
> index bf629c90c758..7e572189a5eb 100644
> --- a/arch/arm/mach-at91/at91sam9.c
> +++ b/arch/arm/mach-at91/at91sam9.c
> @@ -31,21 +31,3 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
> .init_machine = at91sam9_init,
> .dt_compat = at91_dt_board_compat,
> MACHINE_END
> -
> -static void __init sam9x60_init(void)
> -{
> - of_platform_default_populate(NULL, NULL, NULL);
> -
> - sam9x60_pm_init();
> -}
> -
> -static const char *const sam9x60_dt_board_compat[] __initconst = {
> - "microchip,sam9x60",
> - NULL
> -};
> -
> -DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
> - /* Maintainer: Microchip */
> - .init_machine = sam9x60_init,
> - .dt_compat = sam9x60_dt_board_compat,
> -MACHINE_END
> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> index d5af6aedc02c..56a6a49b19e2 100644
> --- a/arch/arm/mach-at91/pm.c
> +++ b/arch/arm/mach-at91/pm.c
> @@ -805,7 +805,7 @@ void __init at91rm9200_pm_init(void)
>
> void __init sam9x60_pm_init(void)
> {
> - if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
> + if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
> return;
>
> at91_pm_modes_init();
> diff --git a/arch/arm/mach-at91/sam9x60.c b/arch/arm/mach-at91/sam9x60.c
> new file mode 100644
> index 000000000000..d8c739d25458
> --- /dev/null
> +++ b/arch/arm/mach-at91/sam9x60.c
> @@ -0,0 +1,34 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Setup code for SAM9X60.
> + *
> + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
> + *
> + * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
> + */
> +
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +
> +#include <asm/mach/arch.h>
> +#include <asm/system_misc.h>
> +
> +#include "generic.h"
> +
> +static void __init sam9x60_init(void)
> +{
> + of_platform_default_populate(NULL, NULL, NULL);
> +
> + sam9x60_pm_init();
> +}
> +
> +static const char *const sam9x60_dt_board_compat[] __initconst = {
> + "microchip,sam9x60",
> + NULL
> +};
> +
> +DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
> + /* Maintainer: Microchip */
> + .init_machine = sam9x60_init,
> + .dt_compat = sam9x60_dt_board_compat,
> +MACHINE_END
> --
> 2.7.4
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH v2 02/17] ARM: at91: pm: move SAM9X60's PM under its own SoC config flag
2019-11-26 21:28 ` Alexandre Belloni
@ 2019-11-27 8:06 ` Claudiu.Beznea
2019-11-27 10:07 ` Alexandre Belloni
0 siblings, 1 reply; 25+ messages in thread
From: Claudiu.Beznea @ 2019-11-27 8:06 UTC (permalink / raw)
To: alexandre.belloni
Cc: linux, Nicolas.Ferre, Ludovic.Desroches, sre, linux-arm-kernel,
linux-kernel, linux-pm
On 26.11.2019 23:28, Alexandre Belloni wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 26/11/2019 15:12:06+0200, Claudiu Beznea wrote:
>> Move SAM9X60's PM part under SoC config flag. This allows the building
>> of SAM9X60 platform withouth depending on CONFIG_SOC_AT91SAM9 flag,
>> allowing us to select only necessary config flags for SAM9X60.
>>
>
> I'm really wondering, how much space does that really save?
>
> The net benefit seems to be very small...
Not that much, indeed. We want to be independent of SOC_AT91SAM9.
>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>> ---
>> arch/arm/mach-at91/Makefile | 1 +
>> arch/arm/mach-at91/at91sam9.c | 18 ------------------
>> arch/arm/mach-at91/pm.c | 2 +-
>> arch/arm/mach-at91/sam9x60.c | 34 ++++++++++++++++++++++++++++++++++
>> 4 files changed, 36 insertions(+), 19 deletions(-)
>> create mode 100644 arch/arm/mach-at91/sam9x60.c
>>
>> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
>> index de64301dcff2..f565490f1b70 100644
>> --- a/arch/arm/mach-at91/Makefile
>> +++ b/arch/arm/mach-at91/Makefile
>> @@ -6,6 +6,7 @@
>> # CPU-specific support
>> obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
>> obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o
>> +obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
>> obj-$(CONFIG_SOC_SAMA5) += sama5.o
>> obj-$(CONFIG_SOC_SAMV7) += samv7.o
>>
>> diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
>> index bf629c90c758..7e572189a5eb 100644
>> --- a/arch/arm/mach-at91/at91sam9.c
>> +++ b/arch/arm/mach-at91/at91sam9.c
>> @@ -31,21 +31,3 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
>> .init_machine = at91sam9_init,
>> .dt_compat = at91_dt_board_compat,
>> MACHINE_END
>> -
>> -static void __init sam9x60_init(void)
>> -{
>> - of_platform_default_populate(NULL, NULL, NULL);
>> -
>> - sam9x60_pm_init();
>> -}
>> -
>> -static const char *const sam9x60_dt_board_compat[] __initconst = {
>> - "microchip,sam9x60",
>> - NULL
>> -};
>> -
>> -DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
>> - /* Maintainer: Microchip */
>> - .init_machine = sam9x60_init,
>> - .dt_compat = sam9x60_dt_board_compat,
>> -MACHINE_END
>> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
>> index d5af6aedc02c..56a6a49b19e2 100644
>> --- a/arch/arm/mach-at91/pm.c
>> +++ b/arch/arm/mach-at91/pm.c
>> @@ -805,7 +805,7 @@ void __init at91rm9200_pm_init(void)
>>
>> void __init sam9x60_pm_init(void)
>> {
>> - if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
>> + if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
>> return;
>>
>> at91_pm_modes_init();
>> diff --git a/arch/arm/mach-at91/sam9x60.c b/arch/arm/mach-at91/sam9x60.c
>> new file mode 100644
>> index 000000000000..d8c739d25458
>> --- /dev/null
>> +++ b/arch/arm/mach-at91/sam9x60.c
>> @@ -0,0 +1,34 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Setup code for SAM9X60.
>> + *
>> + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
>> + *
>> + * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
>> + */
>> +
>> +#include <linux/of.h>
>> +#include <linux/of_platform.h>
>> +
>> +#include <asm/mach/arch.h>
>> +#include <asm/system_misc.h>
>> +
>> +#include "generic.h"
>> +
>> +static void __init sam9x60_init(void)
>> +{
>> + of_platform_default_populate(NULL, NULL, NULL);
>> +
>> + sam9x60_pm_init();
>> +}
>> +
>> +static const char *const sam9x60_dt_board_compat[] __initconst = {
>> + "microchip,sam9x60",
>> + NULL
>> +};
>> +
>> +DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
>> + /* Maintainer: Microchip */
>> + .init_machine = sam9x60_init,
>> + .dt_compat = sam9x60_dt_board_compat,
>> +MACHINE_END
>> --
>> 2.7.4
>>
>
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH v2 02/17] ARM: at91: pm: move SAM9X60's PM under its own SoC config flag
2019-11-27 8:06 ` Claudiu.Beznea
@ 2019-11-27 10:07 ` Alexandre Belloni
2019-11-27 10:59 ` Nicolas.Ferre
2019-11-27 11:00 ` Claudiu.Beznea
0 siblings, 2 replies; 25+ messages in thread
From: Alexandre Belloni @ 2019-11-27 10:07 UTC (permalink / raw)
To: Claudiu.Beznea
Cc: linux, Nicolas.Ferre, Ludovic.Desroches, sre, linux-arm-kernel,
linux-kernel, linux-pm
On 27/11/2019 08:06:47+0000, Claudiu.Beznea@microchip.com wrote:
>
>
> On 26.11.2019 23:28, Alexandre Belloni wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> >
> > On 26/11/2019 15:12:06+0200, Claudiu Beznea wrote:
> >> Move SAM9X60's PM part under SoC config flag. This allows the building
> >> of SAM9X60 platform withouth depending on CONFIG_SOC_AT91SAM9 flag,
> >> allowing us to select only necessary config flags for SAM9X60.
> >>
> >
> > I'm really wondering, how much space does that really save?
> >
> > The net benefit seems to be very small...
>
> Not that much, indeed. We want to be independent of SOC_AT91SAM9.
>
The question is why? I don't see the technical benefit but I
definitively see the maintenance burden of having two separate configs
doing almost the same thing.
> >
> >> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> >> ---
> >> arch/arm/mach-at91/Makefile | 1 +
> >> arch/arm/mach-at91/at91sam9.c | 18 ------------------
> >> arch/arm/mach-at91/pm.c | 2 +-
> >> arch/arm/mach-at91/sam9x60.c | 34 ++++++++++++++++++++++++++++++++++
> >> 4 files changed, 36 insertions(+), 19 deletions(-)
> >> create mode 100644 arch/arm/mach-at91/sam9x60.c
> >>
> >> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> >> index de64301dcff2..f565490f1b70 100644
> >> --- a/arch/arm/mach-at91/Makefile
> >> +++ b/arch/arm/mach-at91/Makefile
> >> @@ -6,6 +6,7 @@
> >> # CPU-specific support
> >> obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
> >> obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o
> >> +obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
> >> obj-$(CONFIG_SOC_SAMA5) += sama5.o
> >> obj-$(CONFIG_SOC_SAMV7) += samv7.o
> >>
> >> diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
> >> index bf629c90c758..7e572189a5eb 100644
> >> --- a/arch/arm/mach-at91/at91sam9.c
> >> +++ b/arch/arm/mach-at91/at91sam9.c
> >> @@ -31,21 +31,3 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
> >> .init_machine = at91sam9_init,
> >> .dt_compat = at91_dt_board_compat,
> >> MACHINE_END
> >> -
> >> -static void __init sam9x60_init(void)
> >> -{
> >> - of_platform_default_populate(NULL, NULL, NULL);
> >> -
> >> - sam9x60_pm_init();
> >> -}
> >> -
> >> -static const char *const sam9x60_dt_board_compat[] __initconst = {
> >> - "microchip,sam9x60",
> >> - NULL
> >> -};
> >> -
> >> -DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
> >> - /* Maintainer: Microchip */
> >> - .init_machine = sam9x60_init,
> >> - .dt_compat = sam9x60_dt_board_compat,
> >> -MACHINE_END
> >> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> >> index d5af6aedc02c..56a6a49b19e2 100644
> >> --- a/arch/arm/mach-at91/pm.c
> >> +++ b/arch/arm/mach-at91/pm.c
> >> @@ -805,7 +805,7 @@ void __init at91rm9200_pm_init(void)
> >>
> >> void __init sam9x60_pm_init(void)
> >> {
> >> - if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
> >> + if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
> >> return;
> >>
> >> at91_pm_modes_init();
> >> diff --git a/arch/arm/mach-at91/sam9x60.c b/arch/arm/mach-at91/sam9x60.c
> >> new file mode 100644
> >> index 000000000000..d8c739d25458
> >> --- /dev/null
> >> +++ b/arch/arm/mach-at91/sam9x60.c
> >> @@ -0,0 +1,34 @@
> >> +// SPDX-License-Identifier: GPL-2.0+
> >> +/*
> >> + * Setup code for SAM9X60.
> >> + *
> >> + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
> >> + *
> >> + * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
> >> + */
> >> +
> >> +#include <linux/of.h>
> >> +#include <linux/of_platform.h>
> >> +
> >> +#include <asm/mach/arch.h>
> >> +#include <asm/system_misc.h>
> >> +
> >> +#include "generic.h"
> >> +
> >> +static void __init sam9x60_init(void)
> >> +{
> >> + of_platform_default_populate(NULL, NULL, NULL);
> >> +
> >> + sam9x60_pm_init();
> >> +}
> >> +
> >> +static const char *const sam9x60_dt_board_compat[] __initconst = {
> >> + "microchip,sam9x60",
> >> + NULL
> >> +};
> >> +
> >> +DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
> >> + /* Maintainer: Microchip */
> >> + .init_machine = sam9x60_init,
> >> + .dt_compat = sam9x60_dt_board_compat,
> >> +MACHINE_END
> >> --
> >> 2.7.4
> >>
> >
> > --
> > Alexandre Belloni, Bootlin
> > Embedded Linux and Kernel engineering
> > https://bootlin.com
> >
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH v2 02/17] ARM: at91: pm: move SAM9X60's PM under its own SoC config flag
2019-11-27 10:07 ` Alexandre Belloni
@ 2019-11-27 10:59 ` Nicolas.Ferre
2019-11-27 11:00 ` Claudiu.Beznea
1 sibling, 0 replies; 25+ messages in thread
From: Nicolas.Ferre @ 2019-11-27 10:59 UTC (permalink / raw)
To: alexandre.belloni, Claudiu.Beznea
Cc: linux, Ludovic.Desroches, sre, linux-arm-kernel, linux-kernel, linux-pm
On 27/11/2019 at 11:07, Alexandre Belloni wrote:
> On 27/11/2019 08:06:47+0000, Claudiu.Beznea@microchip.com wrote:
>>
>>
>> On 26.11.2019 23:28, Alexandre Belloni wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>>
>>> On 26/11/2019 15:12:06+0200, Claudiu Beznea wrote:
>>>> Move SAM9X60's PM part under SoC config flag. This allows the building
>>>> of SAM9X60 platform withouth depending on CONFIG_SOC_AT91SAM9 flag,
>>>> allowing us to select only necessary config flags for SAM9X60.
>>>>
>>>
>>> I'm really wondering, how much space does that really save?
>>>
>>> The net benefit seems to be very small...
>>
>> Not that much, indeed. We want to be independent of SOC_AT91SAM9.
>>
>
> The question is why? I don't see the technical benefit but I
> definitively see the maintenance burden of having two separate configs
> doing almost the same thing.
The AT91SAM9 config embeds a bunch of earlier drivers/clock definitions
that are not needed anymore in the new SAM9X60. Likewise, some sam9x60
new things are not needed at all for the older sam9 series.
There is somehow a generation gap between them...
I would like that we preserve the possibility to only embed the sam9x60
alone in a tailored kernel configuration, basically how it is done for
our SAMA5s. I know that we're talking about ~100s of KB here, but
however, it's easy to do now and it could make a difference when
targeting low spec systems.
Maintaining the SAMA5 as separate config options never proved us to be
difficult to do.
Best regards,
Nicolas
>>>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>>>> ---
>>>> arch/arm/mach-at91/Makefile | 1 +
>>>> arch/arm/mach-at91/at91sam9.c | 18 ------------------
>>>> arch/arm/mach-at91/pm.c | 2 +-
>>>> arch/arm/mach-at91/sam9x60.c | 34 ++++++++++++++++++++++++++++++++++
>>>> 4 files changed, 36 insertions(+), 19 deletions(-)
>>>> create mode 100644 arch/arm/mach-at91/sam9x60.c
>>>>
>>>> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
>>>> index de64301dcff2..f565490f1b70 100644
>>>> --- a/arch/arm/mach-at91/Makefile
>>>> +++ b/arch/arm/mach-at91/Makefile
>>>> @@ -6,6 +6,7 @@
>>>> # CPU-specific support
>>>> obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
>>>> obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o
>>>> +obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
>>>> obj-$(CONFIG_SOC_SAMA5) += sama5.o
>>>> obj-$(CONFIG_SOC_SAMV7) += samv7.o
>>>>
>>>> diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
>>>> index bf629c90c758..7e572189a5eb 100644
>>>> --- a/arch/arm/mach-at91/at91sam9.c
>>>> +++ b/arch/arm/mach-at91/at91sam9.c
>>>> @@ -31,21 +31,3 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
>>>> .init_machine = at91sam9_init,
>>>> .dt_compat = at91_dt_board_compat,
>>>> MACHINE_END
>>>> -
>>>> -static void __init sam9x60_init(void)
>>>> -{
>>>> - of_platform_default_populate(NULL, NULL, NULL);
>>>> -
>>>> - sam9x60_pm_init();
>>>> -}
>>>> -
>>>> -static const char *const sam9x60_dt_board_compat[] __initconst = {
>>>> - "microchip,sam9x60",
>>>> - NULL
>>>> -};
>>>> -
>>>> -DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
>>>> - /* Maintainer: Microchip */
>>>> - .init_machine = sam9x60_init,
>>>> - .dt_compat = sam9x60_dt_board_compat,
>>>> -MACHINE_END
>>>> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
>>>> index d5af6aedc02c..56a6a49b19e2 100644
>>>> --- a/arch/arm/mach-at91/pm.c
>>>> +++ b/arch/arm/mach-at91/pm.c
>>>> @@ -805,7 +805,7 @@ void __init at91rm9200_pm_init(void)
>>>>
>>>> void __init sam9x60_pm_init(void)
>>>> {
>>>> - if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
>>>> + if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
>>>> return;
>>>>
>>>> at91_pm_modes_init();
>>>> diff --git a/arch/arm/mach-at91/sam9x60.c b/arch/arm/mach-at91/sam9x60.c
>>>> new file mode 100644
>>>> index 000000000000..d8c739d25458
>>>> --- /dev/null
>>>> +++ b/arch/arm/mach-at91/sam9x60.c
>>>> @@ -0,0 +1,34 @@
>>>> +// SPDX-License-Identifier: GPL-2.0+
>>>> +/*
>>>> + * Setup code for SAM9X60.
>>>> + *
>>>> + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
>>>> + *
>>>> + * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
>>>> + */
>>>> +
>>>> +#include <linux/of.h>
>>>> +#include <linux/of_platform.h>
>>>> +
>>>> +#include <asm/mach/arch.h>
>>>> +#include <asm/system_misc.h>
>>>> +
>>>> +#include "generic.h"
>>>> +
>>>> +static void __init sam9x60_init(void)
>>>> +{
>>>> + of_platform_default_populate(NULL, NULL, NULL);
>>>> +
>>>> + sam9x60_pm_init();
>>>> +}
>>>> +
>>>> +static const char *const sam9x60_dt_board_compat[] __initconst = {
>>>> + "microchip,sam9x60",
>>>> + NULL
>>>> +};
>>>> +
>>>> +DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
>>>> + /* Maintainer: Microchip */
>>>> + .init_machine = sam9x60_init,
>>>> + .dt_compat = sam9x60_dt_board_compat,
>>>> +MACHINE_END
>>>> --
>>>> 2.7.4
>>>>
>>>
>>> --
>>> Alexandre Belloni, Bootlin
>>> Embedded Linux and Kernel engineering
>>> https://bootlin.com
>>>
>
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: [PATCH v2 02/17] ARM: at91: pm: move SAM9X60's PM under its own SoC config flag
2019-11-27 10:07 ` Alexandre Belloni
2019-11-27 10:59 ` Nicolas.Ferre
@ 2019-11-27 11:00 ` Claudiu.Beznea
1 sibling, 0 replies; 25+ messages in thread
From: Claudiu.Beznea @ 2019-11-27 11:00 UTC (permalink / raw)
To: alexandre.belloni
Cc: linux, Nicolas.Ferre, Ludovic.Desroches, sre, linux-arm-kernel,
linux-kernel, linux-pm
On 27.11.2019 12:07, Alexandre Belloni wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 27/11/2019 08:06:47+0000, Claudiu.Beznea@microchip.com wrote:
>>
>>
>> On 26.11.2019 23:28, Alexandre Belloni wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>>
>>> On 26/11/2019 15:12:06+0200, Claudiu Beznea wrote:
>>>> Move SAM9X60's PM part under SoC config flag. This allows the building
>>>> of SAM9X60 platform withouth depending on CONFIG_SOC_AT91SAM9 flag,
>>>> allowing us to select only necessary config flags for SAM9X60.
>>>>
>>>
>>> I'm really wondering, how much space does that really save?
>>>
>>> The net benefit seems to be very small...
>>
>> Not that much, indeed. We want to be independent of SOC_AT91SAM9.
>>
>
> The question is why? I don't see the technical benefit but I
> definitively see the maintenance burden of having two separate configs
> doing almost the same thing.
As I said above: to be able to build SAM9X60 without depending on
SOC_AT91SAM9 and to limit the legacy (in term of drivers) coming with
SOC_AT91SAM9.
Would you prefer the other way around like I had in the 1st version:
+config SOC_SAM9X60
+ bool "SAM9X60"
+ depends on SOC_AT91SAM9
+ select ATMEL_AIC5_IRQ
+ select HAVE_AT91_GENERATED_CLK
+ select HAVE_AT91_SAM9X60_PLL
+ help
+ Select this if you are using Microchip's SAM9X60 SoC
>
>>>
>>>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>>>> ---
>>>> arch/arm/mach-at91/Makefile | 1 +
>>>> arch/arm/mach-at91/at91sam9.c | 18 ------------------
>>>> arch/arm/mach-at91/pm.c | 2 +-
>>>> arch/arm/mach-at91/sam9x60.c | 34 ++++++++++++++++++++++++++++++++++
>>>> 4 files changed, 36 insertions(+), 19 deletions(-)
>>>> create mode 100644 arch/arm/mach-at91/sam9x60.c
>>>>
>>>> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
>>>> index de64301dcff2..f565490f1b70 100644
>>>> --- a/arch/arm/mach-at91/Makefile
>>>> +++ b/arch/arm/mach-at91/Makefile
>>>> @@ -6,6 +6,7 @@
>>>> # CPU-specific support
>>>> obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
>>>> obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o
>>>> +obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
>>>> obj-$(CONFIG_SOC_SAMA5) += sama5.o
>>>> obj-$(CONFIG_SOC_SAMV7) += samv7.o
>>>>
>>>> diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
>>>> index bf629c90c758..7e572189a5eb 100644
>>>> --- a/arch/arm/mach-at91/at91sam9.c
>>>> +++ b/arch/arm/mach-at91/at91sam9.c
>>>> @@ -31,21 +31,3 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
>>>> .init_machine = at91sam9_init,
>>>> .dt_compat = at91_dt_board_compat,
>>>> MACHINE_END
>>>> -
>>>> -static void __init sam9x60_init(void)
>>>> -{
>>>> - of_platform_default_populate(NULL, NULL, NULL);
>>>> -
>>>> - sam9x60_pm_init();
>>>> -}
>>>> -
>>>> -static const char *const sam9x60_dt_board_compat[] __initconst = {
>>>> - "microchip,sam9x60",
>>>> - NULL
>>>> -};
>>>> -
>>>> -DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
>>>> - /* Maintainer: Microchip */
>>>> - .init_machine = sam9x60_init,
>>>> - .dt_compat = sam9x60_dt_board_compat,
>>>> -MACHINE_END
>>>> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
>>>> index d5af6aedc02c..56a6a49b19e2 100644
>>>> --- a/arch/arm/mach-at91/pm.c
>>>> +++ b/arch/arm/mach-at91/pm.c
>>>> @@ -805,7 +805,7 @@ void __init at91rm9200_pm_init(void)
>>>>
>>>> void __init sam9x60_pm_init(void)
>>>> {
>>>> - if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
>>>> + if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
>>>> return;
>>>>
>>>> at91_pm_modes_init();
>>>> diff --git a/arch/arm/mach-at91/sam9x60.c b/arch/arm/mach-at91/sam9x60.c
>>>> new file mode 100644
>>>> index 000000000000..d8c739d25458
>>>> --- /dev/null
>>>> +++ b/arch/arm/mach-at91/sam9x60.c
>>>> @@ -0,0 +1,34 @@
>>>> +// SPDX-License-Identifier: GPL-2.0+
>>>> +/*
>>>> + * Setup code for SAM9X60.
>>>> + *
>>>> + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
>>>> + *
>>>> + * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
>>>> + */
>>>> +
>>>> +#include <linux/of.h>
>>>> +#include <linux/of_platform.h>
>>>> +
>>>> +#include <asm/mach/arch.h>
>>>> +#include <asm/system_misc.h>
>>>> +
>>>> +#include "generic.h"
>>>> +
>>>> +static void __init sam9x60_init(void)
>>>> +{
>>>> + of_platform_default_populate(NULL, NULL, NULL);
>>>> +
>>>> + sam9x60_pm_init();
>>>> +}
>>>> +
>>>> +static const char *const sam9x60_dt_board_compat[] __initconst = {
>>>> + "microchip,sam9x60",
>>>> + NULL
>>>> +};
>>>> +
>>>> +DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
>>>> + /* Maintainer: Microchip */
>>>> + .init_machine = sam9x60_init,
>>>> + .dt_compat = sam9x60_dt_board_compat,
>>>> +MACHINE_END
>>>> --
>>>> 2.7.4
>>>>
>>>
>>> --
>>> Alexandre Belloni, Bootlin
>>> Embedded Linux and Kernel engineering
>>> https://bootlin.com
>>>
>
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH v2 03/17] drivers: soc: atmel: move sam9x60 under its own config flag
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 01/17] ARM: at91: Kconfig: add sam9x60 pll config flag Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 02/17] ARM: at91: pm: move SAM9X60's PM under its own SoC " Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 04/17] power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60 Claudiu Beznea
` (14 subsequent siblings)
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Claudiu Beznea
Move SAM9X60 under its own config flag.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
drivers/soc/atmel/soc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/atmel/soc.c b/drivers/soc/atmel/soc.c
index 096a83cf0caf..55a1f57a4d8c 100644
--- a/drivers/soc/atmel/soc.c
+++ b/drivers/soc/atmel/soc.c
@@ -66,8 +66,9 @@ static const struct at91_soc __initconst socs[] = {
AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
- AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_EXID_MATCH,
- "sam9x60", "sam9x60"),
+#endif
+#ifdef CONFIG_SOC_SAM9X60
+ AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_EXID_MATCH, "sam9x60", "sam9x60"),
#endif
#ifdef CONFIG_SOC_SAMA5
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH,
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v2 04/17] power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (2 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 03/17] drivers: soc: atmel: move sam9x60 under its own " Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-29 14:06 ` Sebastian Reichel
2019-11-26 13:12 ` [PATCH v2 05/17] drivers: soc: atmel: select POWER_RESET_AT91_SAMA5D2_SHDWC " Claudiu Beznea
` (13 subsequent siblings)
17 siblings, 1 reply; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Claudiu Beznea
Select POWER_RESET_AT91_RESET for SAM9X60 SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
drivers/power/reset/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index c721939767eb..886e60017f4d 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -26,7 +26,7 @@ config POWER_RESET_AT91_POWEROFF
config POWER_RESET_AT91_RESET
tristate "Atmel AT91 reset driver"
depends on ARCH_AT91
- default SOC_AT91SAM9 || SOC_SAMA5
+ default SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
help
This driver supports restart for Atmel AT91SAM9 and SAMA5
SoCs
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH v2 04/17] power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60
2019-11-26 13:12 ` [PATCH v2 04/17] power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60 Claudiu Beznea
@ 2019-11-29 14:06 ` Sebastian Reichel
0 siblings, 0 replies; 25+ messages in thread
From: Sebastian Reichel @ 2019-11-29 14:06 UTC (permalink / raw)
To: Claudiu Beznea
Cc: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches,
linux-arm-kernel, linux-kernel, linux-pm
[-- Attachment #1: Type: text/plain, Size: 935 bytes --]
Hi,
On Tue, Nov 26, 2019 at 03:12:08PM +0200, Claudiu Beznea wrote:
> Select POWER_RESET_AT91_RESET for SAM9X60 SoC.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
> drivers/power/reset/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index c721939767eb..886e60017f4d 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -26,7 +26,7 @@ config POWER_RESET_AT91_POWEROFF
> config POWER_RESET_AT91_RESET
> tristate "Atmel AT91 reset driver"
> depends on ARCH_AT91
> - default SOC_AT91SAM9 || SOC_SAMA5
> + default SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
> help
> This driver supports restart for Atmel AT91SAM9 and SAMA5
> SoCs
I suppose this will go through ARM:
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-- Sebastian
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 25+ messages in thread
* [PATCH v2 05/17] drivers: soc: atmel: select POWER_RESET_AT91_SAMA5D2_SHDWC for sam9x60
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (3 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 04/17] power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60 Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 06/17] ARM: debug-ll: select DEBUG_AT91_RM9200_DBGU " Claudiu Beznea
` (12 subsequent siblings)
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Claudiu Beznea
Select POWER_RESET_AT91_SAMA5D2_SHDWC for SAM9X60 SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
drivers/power/reset/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 886e60017f4d..ff81d02740c2 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -34,7 +34,7 @@ config POWER_RESET_AT91_RESET
config POWER_RESET_AT91_SAMA5D2_SHDWC
tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver"
depends on ARCH_AT91
- default SOC_SAMA5
+ default SOC_SAM9X60 || SOC_SAMA5
help
This driver supports the alternate shutdown controller for some Atmel
SAMA5 SoCs. It is present for example on SAMA5D2 SoC.
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v2 06/17] ARM: debug-ll: select DEBUG_AT91_RM9200_DBGU for sam9x60
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (4 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 05/17] drivers: soc: atmel: select POWER_RESET_AT91_SAMA5D2_SHDWC " Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 07/17] ARM: at91: Kconfig: add config flag for SAM9X60 SoC Claudiu Beznea
` (11 subsequent siblings)
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Claudiu Beznea
Select DEBUG_AT91_RM9200_DBGU for SAM9X60 SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/Kconfig.debug | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8bcbd0cd739b..b70d7debf5ca 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -147,14 +147,14 @@ choice
0x80024000 | 0xf0024000 | UART9
config DEBUG_AT91_RM9200_DBGU
- bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU"
+ bool "Kernel low-level debugging on AT91RM9200, AT91SAM9, SAM9X60 DBGU"
select DEBUG_AT91_UART
- depends on SOC_AT91RM9200 || SOC_AT91SAM9
+ depends on SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60
help
Say Y here if you want kernel low-level debugging support
on the DBGU port of:
at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
- at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5
+ at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5, sam9x60
config DEBUG_AT91_SAM9263_DBGU
bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v2 07/17] ARM: at91: Kconfig: add config flag for SAM9X60 SoC
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (5 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 06/17] ARM: debug-ll: select DEBUG_AT91_RM9200_DBGU " Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 08/17] ARM: at91/defconfig: use savedefconfig Claudiu Beznea
` (10 subsequent siblings)
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Claudiu Beznea
Add config flag for SAM9X60 SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
arch/arm/mach-at91/Kconfig | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 262b550d7329..7979420bd48b 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -105,11 +105,28 @@ config SOC_AT91SAM9
AT91SAM9X35
AT91SAM9XE
+config SOC_SAM9X60
+ bool "SAM9X60"
+ depends on ARCH_MULTI_V5
+ select ATMEL_AIC5_IRQ
+ select ATMEL_PM if PM
+ select ATMEL_SDRAMC
+ select CPU_ARM926T
+ select HAVE_AT91_USB_CLK
+ select HAVE_AT91_GENERATED_CLK
+ select HAVE_AT91_SAM9X60_PLL
+ select MEMORY
+ select PINCTRL_AT91
+ select SOC_SAM_V4_V5
+ select SRAM if PM
+ help
+ Select this if you are using Microchip's SAM9X60 SoC
+
comment "Clocksource driver selection"
config ATMEL_CLOCKSOURCE_PIT
bool "Periodic Interval Timer (PIT) support"
- depends on SOC_AT91SAM9 || SOC_SAMA5
+ depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
default SOC_AT91SAM9 || SOC_SAMA5
select ATMEL_PIT
help
@@ -119,7 +136,7 @@ config ATMEL_CLOCKSOURCE_PIT
config ATMEL_CLOCKSOURCE_TCB
bool "Timer Counter Blocks (TCB) support"
- default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAMA5
+ default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
select ATMEL_TCB_CLKSRC
help
Select this to get a high precision clocksource based on a
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v2 08/17] ARM: at91/defconfig: use savedefconfig
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (6 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 07/17] ARM: at91: Kconfig: add config flag for SAM9X60 SoC Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 09/17] ARM: at91/defconfig: enable config flag for sam9x60 SoC Claudiu Beznea
` (9 subsequent siblings)
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Claudiu Beznea
Use savedefconfig.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/configs/at91_dt_defconfig | 44 +++++++++++++-------------------------
1 file changed, 15 insertions(+), 29 deletions(-)
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 3729a6e0ee24..148f753de6c7 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -7,11 +7,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MULTI_V4T=y
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V7 is not set
@@ -27,6 +22,9 @@ CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
CONFIG_KEXEC=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
@@ -37,13 +35,7 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
CONFIG_IPV6_SIT_6RD=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
@@ -69,8 +61,8 @@ CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
-CONFIG_MACB=y
# CONFIG_NET_VENDOR_BROADCOM is not set
+CONFIG_MACB=y
CONFIG_DM9000=y
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
@@ -82,10 +74,12 @@ CONFIG_DM9000=y
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_DAVICOM_PHY=y
CONFIG_MICREL_PHY=y
-CONFIG_RTL8187=m
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_SPI=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_USB=m
CONFIG_RT2X00=m
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
@@ -93,15 +87,10 @@ CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RTL8187=m
CONFIG_RTL8192CU=m
# CONFIG_RTLWIFI_DEBUG is not set
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m
-CONFIG_MWIFIEX_USB=m
CONFIG_INPUT_POLLDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
@@ -119,8 +108,8 @@ CONFIG_I2C_AT91=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
-CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
+CONFIG_POWER_SUPPLY=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
@@ -130,14 +119,11 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
CONFIG_VIDEO_ATMEL_ISI=y
-CONFIG_SOC_CAMERA_OV2640=m
CONFIG_DRM=y
CONFIG_DRM_ATMEL_HLCDC=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_FB_ATMEL=y
-# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_ATMEL_LCDC=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_PWM=y
@@ -200,12 +186,6 @@ CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
@@ -215,3 +195,9 @@ CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v2 09/17] ARM: at91/defconfig: enable config flag for sam9x60 SoC
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (7 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 08/17] ARM: at91/defconfig: use savedefconfig Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 10/17] ARM: at91/defconfig: enable config flag for atmel maxtouch Claudiu Beznea
` (8 subsequent siblings)
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Claudiu Beznea
Enable config flag for SAM9X60 SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/configs/at91_dt_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 148f753de6c7..5afc39c241db 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -13,6 +13,7 @@ CONFIG_ARCH_MULTI_V5=y
CONFIG_ARCH_AT91=y
CONFIG_SOC_AT91RM9200=y
CONFIG_SOC_AT91SAM9=y
+CONFIG_SOC_SAM9X60=y
# CONFIG_ATMEL_CLOCKSOURCE_PIT is not set
CONFIG_AEABI=y
CONFIG_UACCESS_WITH_MEMCPY=y
@@ -109,6 +110,7 @@ CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_POWER_RESET=y
+# CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v2 10/17] ARM: at91/defconfig: enable config flag for atmel maxtouch
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (8 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 09/17] ARM: at91/defconfig: enable config flag for sam9x60 SoC Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 11/17] ARM: at91/defconfig: enable config flag for flexcom Claudiu Beznea
` (7 subsequent siblings)
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Claudiu Beznea
Enable config flag for atmel maxtouch. This is needed for SAM9X60 SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/configs/at91_dt_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 5afc39c241db..c3305e563742 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -100,6 +100,7 @@ CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=y
# CONFIG_SERIO is not set
CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_ATMEL=y
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v2 11/17] ARM: at91/defconfig: enable config flag for flexcom
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (9 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 10/17] ARM: at91/defconfig: enable config flag for atmel maxtouch Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 12/17] ARM: at91/defconfig: enable config flag for XDMAC Claudiu Beznea
` (6 subsequent siblings)
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Claudiu Beznea
Enable config flag for flexcom. This IP is available on SAM9X60 SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/configs/at91_dt_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index c3305e563742..7603efe5809e 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -116,6 +116,7 @@ CONFIG_POWER_SUPPLY=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_MFD_ATMEL_FLEXCOM=y
CONFIG_MFD_ATMEL_HLCDC=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v2 12/17] ARM: at91/defconfig: enable config flag for XDMAC
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (10 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 11/17] ARM: at91/defconfig: enable config flag for flexcom Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 13/17] ARM: at91/defconfig: enable config flag for I2S Multi-channel Claudiu Beznea
` (5 subsequent siblings)
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Claudiu Beznea
Enable config flag for XDMA. This IP is available on SAM9X60 SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/configs/at91_dt_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 7603efe5809e..89ab64ce295a 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -171,6 +171,7 @@ CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_DMADEVICES=y
CONFIG_AT_HDMAC=y
+CONFIG_AT_XDMAC=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_AT91_ADC=y
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v2 13/17] ARM: at91/defconfig: enable config flag for I2S Multi-channel
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (11 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 12/17] ARM: at91/defconfig: enable config flag for XDMAC Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 14/17] ARM: at91/defconfig: enable config flag for audio PROTO board Claudiu Beznea
` (4 subsequent siblings)
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Codrin Ciubotariu
From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Enable config flag for I2S Multi-channel. This IP available on SAM9X60
SoC.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
arch/arm/configs/at91_dt_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 89ab64ce295a..7cc27fad0114 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -140,6 +140,7 @@ CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
CONFIG_SND_ATMEL_SOC_WM8904=y
CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
+CONFIG_SND_MCHP_SOC_I2S_MCC=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_EHCI_HCD=y
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v2 14/17] ARM: at91/defconfig: enable config flag for audio PROTO board
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (12 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 13/17] ARM: at91/defconfig: enable config flag for I2S Multi-channel Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 15/17] ARM: at91/defconfig: enable config flag for SAMA5D2's ADC Claudiu Beznea
` (3 subsequent siblings)
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Codrin Ciubotariu
From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Enable config flag for audio proto board. This can be used with I2S
Multi-channel available on SAM9X60 SoC.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
arch/arm/configs/at91_dt_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 7cc27fad0114..b76e9741909c 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -140,6 +140,7 @@ CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
CONFIG_SND_ATMEL_SOC_WM8904=y
CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
+CONFIG_SND_SOC_MIKROE_PROTO=m
CONFIG_SND_MCHP_SOC_I2S_MCC=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v2 15/17] ARM: at91/defconfig: enable config flag for SAMA5D2's ADC
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (13 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 14/17] ARM: at91/defconfig: enable config flag for audio PROTO board Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 16/17] ARM: at91/defconfig: enable config flag for ATMEL QUADSPI Claudiu Beznea
` (2 subsequent siblings)
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Tudor Ambarus
From: Tudor Ambarus <tudor.ambarus@microchip.com>
Enable config flag for SAMA5D2's ADC. This IP is available on
SAM9X60 SoC.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
arch/arm/configs/at91_dt_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index b76e9741909c..011400f926b0 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -177,6 +177,7 @@ CONFIG_AT_XDMAC=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_AT91_ADC=y
+CONFIG_AT91_SAMA5D2_ADC=y
CONFIG_PWM=y
CONFIG_PWM_ATMEL=y
CONFIG_PWM_ATMEL_HLCDC_PWM=y
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v2 16/17] ARM: at91/defconfig: enable config flag for ATMEL QUADSPI
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (14 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 15/17] ARM: at91/defconfig: enable config flag for SAMA5D2's ADC Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 13:12 ` [PATCH v2 17/17] ARM: at91/defconfig: enable config flag for CLASSD Claudiu Beznea
2019-11-26 21:24 ` [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Alexandre Belloni
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Tudor Ambarus
From: Tudor Ambarus <tudor.ambarus@microchip.com>
Enable config flag for ATMEL QUADSPI. This IP is available on SAM9X60
SoC.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
arch/arm/configs/at91_dt_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 011400f926b0..51c91af0a19a 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -50,6 +50,7 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
@@ -110,6 +111,7 @@ CONFIG_I2C_AT91=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
+CONFIG_SPI_ATMEL_QUADSPI=y
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC is not set
CONFIG_POWER_SUPPLY=y
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* [PATCH v2 17/17] ARM: at91/defconfig: enable config flag for CLASSD
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (15 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 16/17] ARM: at91/defconfig: enable config flag for ATMEL QUADSPI Claudiu Beznea
@ 2019-11-26 13:12 ` Claudiu Beznea
2019-11-26 21:24 ` [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Alexandre Belloni
17 siblings, 0 replies; 25+ messages in thread
From: Claudiu Beznea @ 2019-11-26 13:12 UTC (permalink / raw)
To: linux, nicolas.ferre, alexandre.belloni, ludovic.desroches, sre
Cc: linux-arm-kernel, linux-kernel, linux-pm, Codrin Ciubotariu
From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Enable config flag for CLASSD audio interface. This IP is available on
SAM9X60 SoC.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
arch/arm/configs/at91_dt_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 51c91af0a19a..5c5df8bc0074 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -142,6 +142,7 @@ CONFIG_SND_ATMEL_SOC=y
CONFIG_SND_AT91_SOC_SAM9G20_WM8731=y
CONFIG_SND_ATMEL_SOC_WM8904=y
CONFIG_SND_AT91_SOC_SAM9X5_WM8731=y
+CONFIG_SND_ATMEL_SOC_CLASSD=y
CONFIG_SND_SOC_MIKROE_PROTO=m
CONFIG_SND_MCHP_SOC_I2S_MCC=y
CONFIG_USB=y
--
2.7.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: [PATCH v2 00/17] SoC and defconfig support for SAM9X60
2019-11-26 13:12 [PATCH v2 00/17] SoC and defconfig support for SAM9X60 Claudiu Beznea
` (16 preceding siblings ...)
2019-11-26 13:12 ` [PATCH v2 17/17] ARM: at91/defconfig: enable config flag for CLASSD Claudiu Beznea
@ 2019-11-26 21:24 ` Alexandre Belloni
17 siblings, 0 replies; 25+ messages in thread
From: Alexandre Belloni @ 2019-11-26 21:24 UTC (permalink / raw)
To: Claudiu Beznea
Cc: linux, nicolas.ferre, ludovic.desroches, sre, linux-arm-kernel,
linux-kernel, linux-pm
Hi,
On 26/11/2019 15:12:04+0200, Claudiu Beznea wrote:
> Hi,
>
> This series enables proper support for SAM9X60 in Kconfig and
> defconfig.
>
> Thank you,
> Claudiu Beznea
>
> Changes in v2:
> - cahnged cover letter title; previously it was:
> "add defconfig support for SAM9X60"
> - have new entry in arch/arm/mach-at91/Kconfig for SOC_SAM9X60
> independent of SOC_AT91SAM9 to be able to select only necessary
> config flags for SAM9X60 (patches 02/17, 03/17)
> - select POWER_RESET_AT91_RESET and POWER_RESET_AT91_SAMA5D2_SHDWC
> as for SAMA5D2 (patches 04/17, 05/17)
> - select DEBUG_AT91_RM9200_DBGU (patch 06/17)
> - shaped a bit the patches titles and commit desciptions for defconfig
> patches (patches 09-17/17)
>
> Claudiu Beznea (12):
> ARM: at91: Kconfig: add sam9x60 pll config flag
> ARM: at91: pm: move SAM9X60's PM under its own SoC config flag
> drivers: soc: atmel: move sam9x60 under its own config flag
> power: reset: Kconfig: select POWER_RESET_AT91_RESET for sam9x60
> drivers: soc: atmel: select POWER_RESET_AT91_SAMA5D2_SHDWC for sam9x60
> ARM: debug-ll: select DEBUG_AT91_RM9200_DBGU for sam9x60
> ARM: at91: Kconfig: add config flag for SAM9X60 SoC
This patch should come before the other one making use of it.
> ARM: at91/defconfig: use savedefconfig
> ARM: at91/defconfig: enable config flag for sam9x60 SoC
> ARM: at91/defconfig: enable config flag for atmel maxtouch
> ARM: at91/defconfig: enable config flag for flexcom
> ARM: at91/defconfig: enable config flag for XDMAC
>
> Codrin Ciubotariu (3):
> ARM: at91/defconfig: enable config flag for I2S Multi-channel
> ARM: at91/defconfig: enable config flag for audio PROTO board
> ARM: at91/defconfig: enable config flag for CLASSD
>
> Tudor Ambarus (2):
> ARM: at91/defconfig: enable config flag for SAMA5D2's ADC
> ARM: at91/defconfig: enable config flag for ATMEL QUADSPI
Please squash all of those but the savedefconfig.
>
> arch/arm/Kconfig.debug | 6 ++---
> arch/arm/configs/at91_dt_defconfig | 55 ++++++++++++++++++--------------------
> arch/arm/mach-at91/Kconfig | 24 +++++++++++++++--
> arch/arm/mach-at91/Makefile | 1 +
> arch/arm/mach-at91/at91sam9.c | 18 -------------
> arch/arm/mach-at91/pm.c | 2 +-
> arch/arm/mach-at91/sam9x60.c | 34 +++++++++++++++++++++++
> drivers/power/reset/Kconfig | 4 +--
> drivers/soc/atmel/soc.c | 5 ++--
> 9 files changed, 92 insertions(+), 57 deletions(-)
> create mode 100644 arch/arm/mach-at91/sam9x60.c
>
> --
> 2.7.4
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 25+ messages in thread