[PATCH v2 0/2] cpufreq / sched: Rework of cpufreq_update_util() arguments

[PATCH v2 0/2] cpufreq / sched: Rework of cpufreq_update_util() arguments

[Rafael J. Wysocki]

Hi,

There were some comments on the "cpufreq / sched: cpufreq_update_util() flags
and iowait boosting" series I sent some time ago and I wanted to address them,
but for this purpose I had to combine patches [1-2,4/7] from that series
into one and make some changes on top of that.

Then I thought it would be better to send that separately from the iowait
boost part of that series, so here it goes.

[1/2] Removes the util and max args from cpufreq_update_util() and governor
      callbacks and adds a flags argument instead of them.  That argument
      is then used to handle RT and DL in schedutil and the utilization data
      are accessed by it directly (so it is non-modular now to avoid exporting
      the scheduler internals to modules).
[2/2] Replaces the time argument of cpufreq_update_util() with an rq pointer
      which allows some simplifications to be made.

There should be no changes in behavior as a result of this.

The v2 is to address comments from Steve.

Thanks,
Rafael

[PATCH v2 1/2] cpufreq / sched: Pass flags to cpufreq_update_util()

[Rafael J. Wysocki]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

It is useful to know the reason why cpufreq_update_util() has just
been called and that can be passed as flags to cpufreq_update_util()
and to the ->func() callback in struct update_util_data.  However,
doing that in addition to passing the util and max arguments they
already take would be clumsy, so avoid it.

Instead, use the observation that the schedutil governor is part
of the scheduler proper, so it can access scheduler data directly.
This allows the util and max arguments of cpufreq_update_util()
and the ->func() callback in struct update_util_data to be replaced
with a flags one, but schedutil has to be modified to follow.

Thus make the schedutil governor obtain the CFS utilization
information from the scheduler and use the "RT" and "DL" flags
instead of the special utilization value of ULONG_MAX to track
updates from the RT and DL sched classes.  Make it non-modular
too to avoid having to export scheduler variables to modules at
large.

Next, update all of the other users of cpufreq_update_util()
and the ->func() callback in struct update_util_data accordingly.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

v1 -> v2: Do not check cpu_of(rq) against smp_processor_id() in
          cfs_rq_util_change().

---
 drivers/cpufreq/Kconfig            |    5 --
 drivers/cpufreq/cpufreq_governor.c |    2 -
 drivers/cpufreq/intel_pstate.c     |    2 -
 include/linux/sched.h              |   12 ++++--
 kernel/sched/cpufreq.c             |    2 -
 kernel/sched/cpufreq_schedutil.c   |   67 ++++++++++++++++++++-----------------
 kernel/sched/deadline.c            |    4 +-
 kernel/sched/fair.c                |   10 +----
 kernel/sched/rt.c                  |    4 +-
 kernel/sched/sched.h               |   31 +++++------------
 10 files changed, 66 insertions(+), 73 deletions(-)

Index: linux-pm/drivers/cpufreq/cpufreq_governor.c
===================================================================
--- linux-pm.orig/drivers/cpufreq/cpufreq_governor.c
+++ linux-pm/drivers/cpufreq/cpufreq_governor.c
@@ -260,7 +260,7 @@ static void dbs_irq_work(struct irq_work
 }
 
 static void dbs_update_util_handler(struct update_util_data *data, u64 time,
-				    unsigned long util, unsigned long max)
+				    unsigned int flags)
 {
 	struct cpu_dbs_info *cdbs = container_of(data, struct cpu_dbs_info, update_util);
 	struct policy_dbs_info *policy_dbs = cdbs->policy_dbs;
Index: linux-pm/drivers/cpufreq/intel_pstate.c
===================================================================
--- linux-pm.orig/drivers/cpufreq/intel_pstate.c
+++ linux-pm/drivers/cpufreq/intel_pstate.c
@@ -1329,7 +1329,7 @@ static inline void intel_pstate_adjust_b
 }
 
 static void intel_pstate_update_util(struct update_util_data *data, u64 time,
-				     unsigned long util, unsigned long max)
+				     unsigned int flags)
 {
 	struct cpudata *cpu = container_of(data, struct cpudata, update_util);
 	u64 delta_ns = time - cpu->sample.time;
Index: linux-pm/include/linux/sched.h
===================================================================
--- linux-pm.orig/include/linux/sched.h
+++ linux-pm/include/linux/sched.h
@@ -3469,15 +3469,19 @@ static inline unsigned long rlimit_max(u
 	return task_rlimit_max(current, limit);
 }
 
+#define SCHED_CPUFREQ_RT	(1U << 0)
+#define SCHED_CPUFREQ_DL	(1U << 1)
+
+#define SCHED_CPUFREQ_RT_DL	(SCHED_CPUFREQ_RT | SCHED_CPUFREQ_DL)
+
 #ifdef CONFIG_CPU_FREQ
 struct update_util_data {
-	void (*func)(struct update_util_data *data,
-		     u64 time, unsigned long util, unsigned long max);
+       void (*func)(struct update_util_data *data, u64 time, unsigned int flags);
 };
 
 void cpufreq_add_update_util_hook(int cpu, struct update_util_data *data,
-			void (*func)(struct update_util_data *data, u64 time,
-				     unsigned long util, unsigned long max));
+                       void (*func)(struct update_util_data *data, u64 time,
+				    unsigned int flags));
 void cpufreq_remove_update_util_hook(int cpu);
 #endif /* CONFIG_CPU_FREQ */
 
Index: linux-pm/kernel/sched/cpufreq.c
===================================================================
--- linux-pm.orig/kernel/sched/cpufreq.c
+++ linux-pm/kernel/sched/cpufreq.c
@@ -33,7 +33,7 @@ DEFINE_PER_CPU(struct update_util_data *
  */
 void cpufreq_add_update_util_hook(int cpu, struct update_util_data *data,
 			void (*func)(struct update_util_data *data, u64 time,
-				     unsigned long util, unsigned long max))
+				     unsigned int flags))
 {
 	if (WARN_ON(!data || !func))
 		return;
Index: linux-pm/kernel/sched/cpufreq_schedutil.c
===================================================================
--- linux-pm.orig/kernel/sched/cpufreq_schedutil.c
+++ linux-pm/kernel/sched/cpufreq_schedutil.c
@@ -12,7 +12,6 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/cpufreq.h>
-#include <linux/module.h>
 #include <linux/slab.h>
 #include <trace/events/power.h>
 
@@ -53,6 +52,7 @@ struct sugov_cpu {
 	unsigned long util;
 	unsigned long max;
 	u64 last_update;
+	unsigned int flags;
 };
 
 static DEFINE_PER_CPU(struct sugov_cpu, sugov_cpu);
@@ -144,24 +144,39 @@ static unsigned int get_next_freq(struct
 	return cpufreq_driver_resolve_freq(policy, freq);
 }
 
+static void sugov_get_util(unsigned long *util, unsigned long *max)
+{
+	struct rq *rq = this_rq();
+	unsigned long cfs_max = rq->cpu_capacity_orig;
+
+	*util = min(rq->cfs.avg.util_avg, cfs_max);
+	*max = cfs_max;
+}
+
 static void sugov_update_single(struct update_util_data *hook, u64 time,
-				unsigned long util, unsigned long max)
+				unsigned int flags)
 {
 	struct sugov_cpu *sg_cpu = container_of(hook, struct sugov_cpu, update_util);
 	struct sugov_policy *sg_policy = sg_cpu->sg_policy;
 	struct cpufreq_policy *policy = sg_policy->policy;
+	unsigned long util, max;
 	unsigned int next_f;
 
 	if (!sugov_should_update_freq(sg_policy, time))
 		return;
 
-	next_f = util == ULONG_MAX ? policy->cpuinfo.max_freq :
-			get_next_freq(sg_cpu, util, max);
+	if (flags & SCHED_CPUFREQ_RT_DL) {
+		next_f = policy->cpuinfo.max_freq;
+	} else {
+		sugov_get_util(&util, &max);
+		next_f = get_next_freq(sg_cpu, util, max);
+	}
 	sugov_update_commit(sg_policy, time, next_f);
 }
 
 static unsigned int sugov_next_freq_shared(struct sugov_cpu *sg_cpu,
-					   unsigned long util, unsigned long max)
+					   unsigned long util, unsigned long max,
+					   unsigned int flags)
 {
 	struct sugov_policy *sg_policy = sg_cpu->sg_policy;
 	struct cpufreq_policy *policy = sg_policy->policy;
@@ -169,7 +184,7 @@ static unsigned int sugov_next_freq_shar
 	u64 last_freq_update_time = sg_policy->last_freq_update_time;
 	unsigned int j;
 
-	if (util == ULONG_MAX)
+	if (flags & SCHED_CPUFREQ_RT_DL)
 		return max_f;
 
 	for_each_cpu(j, policy->cpus) {
@@ -192,10 +207,10 @@ static unsigned int sugov_next_freq_shar
 		if (delta_ns > TICK_NSEC)
 			continue;
 
-		j_util = j_sg_cpu->util;
-		if (j_util == ULONG_MAX)
+		if (j_sg_cpu->flags & SCHED_CPUFREQ_RT_DL)
 			return max_f;
 
+		j_util = j_sg_cpu->util;
 		j_max = j_sg_cpu->max;
 		if (j_util * max > j_max * util) {
 			util = j_util;
@@ -207,20 +222,24 @@ static unsigned int sugov_next_freq_shar
 }
 
 static void sugov_update_shared(struct update_util_data *hook, u64 time,
-				unsigned long util, unsigned long max)
+				unsigned int flags)
 {
 	struct sugov_cpu *sg_cpu = container_of(hook, struct sugov_cpu, update_util);
 	struct sugov_policy *sg_policy = sg_cpu->sg_policy;
+	unsigned long util, max;
 	unsigned int next_f;
 
+	sugov_get_util(&util, &max);
+
 	raw_spin_lock(&sg_policy->update_lock);
 
 	sg_cpu->util = util;
 	sg_cpu->max = max;
+	sg_cpu->flags = flags;
 	sg_cpu->last_update = time;
 
 	if (sugov_should_update_freq(sg_policy, time)) {
-		next_f = sugov_next_freq_shared(sg_cpu, util, max);
+		next_f = sugov_next_freq_shared(sg_cpu, util, max, flags);
 		sugov_update_commit(sg_policy, time, next_f);
 	}
 
@@ -444,8 +463,9 @@ static int sugov_start(struct cpufreq_po
 
 		sg_cpu->sg_policy = sg_policy;
 		if (policy_is_shared(policy)) {
-			sg_cpu->util = ULONG_MAX;
+			sg_cpu->util = 0;
 			sg_cpu->max = 0;
+			sg_cpu->flags = SCHED_CPUFREQ_RT;
 			sg_cpu->last_update = 0;
 			sg_cpu->cached_raw_freq = 0;
 			cpufreq_add_update_util_hook(cpu, &sg_cpu->update_util,
@@ -495,28 +515,15 @@ static struct cpufreq_governor schedutil
 	.limits = sugov_limits,
 };
 
-static int __init sugov_module_init(void)
-{
-	return cpufreq_register_governor(&schedutil_gov);
-}
-
-static void __exit sugov_module_exit(void)
-{
-	cpufreq_unregister_governor(&schedutil_gov);
-}
-
-MODULE_AUTHOR("Rafael J. Wysocki <rafael.j.wysocki@intel.com>");
-MODULE_DESCRIPTION("Utilization-based CPU frequency selection");
-MODULE_LICENSE("GPL");
-
 #ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL
 struct cpufreq_governor *cpufreq_default_governor(void)
 {
 	return &schedutil_gov;
 }
-
-fs_initcall(sugov_module_init);
-#else
-module_init(sugov_module_init);
 #endif
-module_exit(sugov_module_exit);
+
+static int __init sugov_register(void)
+{
+	return cpufreq_register_governor(&schedutil_gov);
+}
+fs_initcall(sugov_register);
Index: linux-pm/kernel/sched/fair.c
===================================================================
--- linux-pm.orig/kernel/sched/fair.c
+++ linux-pm/kernel/sched/fair.c
@@ -2875,11 +2875,8 @@ static inline void update_tg_load_avg(st
 
 static inline void cfs_rq_util_change(struct cfs_rq *cfs_rq)
 {
-	struct rq *rq = rq_of(cfs_rq);
-	int cpu = cpu_of(rq);
-
-	if (cpu == smp_processor_id() && &rq->cfs == cfs_rq) {
-		unsigned long max = rq->cpu_capacity_orig;
+	if (&this_rq()->cfs == cfs_rq) {
+		struct rq *rq = rq_of(cfs_rq);
 
 		/*
 		 * There are a few boundary cases this might miss but it should
@@ -2897,8 +2894,7 @@ static inline void cfs_rq_util_change(st
 		 *
 		 * See cpu_util().
 		 */
-		cpufreq_update_util(rq_clock(rq),
-				    min(cfs_rq->avg.util_avg, max), max);
+		cpufreq_update_util(rq_clock(rq), 0);
 	}
 }
 
Index: linux-pm/kernel/sched/sched.h
===================================================================
--- linux-pm.orig/kernel/sched/sched.h
+++ linux-pm/kernel/sched/sched.h
@@ -1764,26 +1764,12 @@ DECLARE_PER_CPU(struct update_util_data
 /**
  * cpufreq_update_util - Take a note about CPU utilization changes.
  * @time: Current time.
- * @util: Current utilization.
- * @max: Utilization ceiling.
+ * @flags: Update reason flags.
  *
- * This function is called by the scheduler on every invocation of
- * update_load_avg() on the CPU whose utilization is being updated.
+ * This function is called by the scheduler on the CPU whose utilization is
+ * being updated.
  *
  * It can only be called from RCU-sched read-side critical sections.
- */
-static inline void cpufreq_update_util(u64 time, unsigned long util, unsigned long max)
-{
-       struct update_util_data *data;
-
-       data = rcu_dereference_sched(*this_cpu_ptr(&cpufreq_update_util_data));
-       if (data)
-               data->func(data, time, util, max);
-}
-
-/**
- * cpufreq_trigger_update - Trigger CPU performance state evaluation if needed.
- * @time: Current time.
  *
  * The way cpufreq is currently arranged requires it to evaluate the CPU
  * performance state (frequency/voltage) on a regular basis to prevent it from
@@ -1797,13 +1783,16 @@ static inline void cpufreq_update_util(u
  * but that really is a band-aid.  Going forward it should be replaced with
  * solutions targeted more specifically at RT and DL tasks.
  */
-static inline void cpufreq_trigger_update(u64 time)
+static inline void cpufreq_update_util(u64 time, unsigned int flags)
 {
-	cpufreq_update_util(time, ULONG_MAX, 0);
+	struct update_util_data *data;
+
+	data = rcu_dereference_sched(*this_cpu_ptr(&cpufreq_update_util_data));
+	if (data)
+		data->func(data, time, flags);
 }
 #else
-static inline void cpufreq_update_util(u64 time, unsigned long util, unsigned long max) {}
-static inline void cpufreq_trigger_update(u64 time) {}
+static inline void cpufreq_update_util(u64 time, unsigned int flags) {}
 #endif /* CONFIG_CPU_FREQ */
 
 #ifdef arch_scale_freq_capacity
Index: linux-pm/kernel/sched/deadline.c
===================================================================
--- linux-pm.orig/kernel/sched/deadline.c
+++ linux-pm/kernel/sched/deadline.c
@@ -732,9 +732,9 @@ static void update_curr_dl(struct rq *rq
 		return;
 	}
 
-	/* kick cpufreq (see the comment in linux/cpufreq.h). */
+	/* kick cpufreq (see the comment in kernel/sched/sched.h). */
 	if (cpu_of(rq) == smp_processor_id())
-		cpufreq_trigger_update(rq_clock(rq));
+		cpufreq_update_util(rq_clock(rq), SCHED_CPUFREQ_DL);
 
 	schedstat_set(curr->se.statistics.exec_max,
 		      max(curr->se.statistics.exec_max, delta_exec));
Index: linux-pm/kernel/sched/rt.c
===================================================================
--- linux-pm.orig/kernel/sched/rt.c
+++ linux-pm/kernel/sched/rt.c
@@ -957,9 +957,9 @@ static void update_curr_rt(struct rq *rq
 	if (unlikely((s64)delta_exec <= 0))
 		return;
 
-	/* Kick cpufreq (see the comment in linux/cpufreq.h). */
+	/* Kick cpufreq (see the comment in kernel/sched/sched.h). */
 	if (cpu_of(rq) == smp_processor_id())
-		cpufreq_trigger_update(rq_clock(rq));
+		cpufreq_update_util(rq_clock(rq), SCHED_CPUFREQ_RT);
 
 	schedstat_set(curr->se.statistics.exec_max,
 		      max(curr->se.statistics.exec_max, delta_exec));
Index: linux-pm/drivers/cpufreq/Kconfig
===================================================================
--- linux-pm.orig/drivers/cpufreq/Kconfig
+++ linux-pm/drivers/cpufreq/Kconfig
@@ -194,7 +194,7 @@ config CPU_FREQ_GOV_CONSERVATIVE
 	  If in doubt, say N.
 
 config CPU_FREQ_GOV_SCHEDUTIL
-	tristate "'schedutil' cpufreq policy governor"
+	bool "'schedutil' cpufreq policy governor"
 	depends on CPU_FREQ && SMP
 	select CPU_FREQ_GOV_ATTR_SET
 	select IRQ_WORK
@@ -208,9 +208,6 @@ config CPU_FREQ_GOV_SCHEDUTIL
 	  frequency tipping point is at utilization/capacity equal to 80% in
 	  both cases.
 
-	  To compile this driver as a module, choose M here: the module will
-	  be called cpufreq_schedutil.
-
 	  If in doubt, say N.
 
 comment "CPU frequency scaling drivers"

[PATCH v2 2/2] cpufreq / sched: Pass runqueue pointer to cpufreq_update_util()

[Rafael J. Wysocki]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

All of the callers of cpufreq_update_util() pass rq_clock(rq) to it
as the time argument and some of them check whether or not cpu_of(rq)
is equal to smp_processor_id() before calling it, so rework it to
take a runqueue pointer as the argument and move the rq_clock(rq)
evaluation into it.

Additionally, provide a wrapper checking cpu_of(rq) against
smp_processor_id() for the cpufreq_update_util() callers that
need it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

This is a new patch based on the [2/2] from v1.

---
 kernel/sched/deadline.c |    3 +--
 kernel/sched/fair.c     |    4 +---
 kernel/sched/rt.c       |    3 +--
 kernel/sched/sched.h    |   15 +++++++++++----
 4 files changed, 14 insertions(+), 11 deletions(-)

Index: linux-pm/kernel/sched/deadline.c
===================================================================
--- linux-pm.orig/kernel/sched/deadline.c
+++ linux-pm/kernel/sched/deadline.c
@@ -733,8 +733,7 @@ static void update_curr_dl(struct rq *rq
 	}
 
 	/* kick cpufreq (see the comment in kernel/sched/sched.h). */
-	if (cpu_of(rq) == smp_processor_id())
-		cpufreq_update_util(rq_clock(rq), SCHED_CPUFREQ_DL);
+	cpufreq_update_this_cpu(rq, SCHED_CPUFREQ_DL);
 
 	schedstat_set(curr->se.statistics.exec_max,
 		      max(curr->se.statistics.exec_max, delta_exec));
Index: linux-pm/kernel/sched/fair.c
===================================================================
--- linux-pm.orig/kernel/sched/fair.c
+++ linux-pm/kernel/sched/fair.c
@@ -2876,8 +2876,6 @@ static inline void update_tg_load_avg(st
 static inline void cfs_rq_util_change(struct cfs_rq *cfs_rq)
 {
 	if (&this_rq()->cfs == cfs_rq) {
-		struct rq *rq = rq_of(cfs_rq);
-
 		/*
 		 * There are a few boundary cases this might miss but it should
 		 * get called often enough that that should (hopefully) not be
@@ -2894,7 +2892,7 @@ static inline void cfs_rq_util_change(st
 		 *
 		 * See cpu_util().
 		 */
-		cpufreq_update_util(rq_clock(rq), 0);
+		cpufreq_update_util(rq_of(cfs_rq), 0);
 	}
 }
 
Index: linux-pm/kernel/sched/rt.c
===================================================================
--- linux-pm.orig/kernel/sched/rt.c
+++ linux-pm/kernel/sched/rt.c
@@ -958,8 +958,7 @@ static void update_curr_rt(struct rq *rq
 		return;
 
 	/* Kick cpufreq (see the comment in kernel/sched/sched.h). */
-	if (cpu_of(rq) == smp_processor_id())
-		cpufreq_update_util(rq_clock(rq), SCHED_CPUFREQ_RT);
+	cpufreq_update_this_cpu(rq, SCHED_CPUFREQ_RT);
 
 	schedstat_set(curr->se.statistics.exec_max,
 		      max(curr->se.statistics.exec_max, delta_exec));
Index: linux-pm/kernel/sched/sched.h
===================================================================
--- linux-pm.orig/kernel/sched/sched.h
+++ linux-pm/kernel/sched/sched.h
@@ -1763,7 +1763,7 @@ DECLARE_PER_CPU(struct update_util_data
 
 /**
  * cpufreq_update_util - Take a note about CPU utilization changes.
- * @time: Current time.
+ * @rq: Runqueue to carry out the update for.
  * @flags: Update reason flags.
  *
  * This function is called by the scheduler on the CPU whose utilization is
@@ -1783,16 +1783,23 @@ DECLARE_PER_CPU(struct update_util_data
  * but that really is a band-aid.  Going forward it should be replaced with
  * solutions targeted more specifically at RT and DL tasks.
  */
-static inline void cpufreq_update_util(u64 time, unsigned int flags)
+static inline void cpufreq_update_util(struct rq *rq, unsigned int flags)
 {
 	struct update_util_data *data;
 
 	data = rcu_dereference_sched(*this_cpu_ptr(&cpufreq_update_util_data));
 	if (data)
-		data->func(data, time, flags);
+		data->func(data, rq_clock(rq), flags);
+}
+
+static inline void cpufreq_update_this_cpu(struct rq *rq, unsigned int flags)
+{
+	if (cpu_of(rq) == smp_processor_id())
+		cpufreq_update_util(rq, flags);
 }
 #else
-static inline void cpufreq_update_util(u64 time, unsigned int flags) {}
+static inline void cpufreq_update_util(struct rq *rq, unsigned int flags) {}
+static inline void cpufreq_update_this_cpu(struct rq *rq, unsigned int flags) {}
 #endif /* CONFIG_CPU_FREQ */
 
 #ifdef arch_scale_freq_capacity

Re: [PATCH v2 1/2] cpufreq / sched: Pass flags to cpufreq_update_util()

[Steve Muckle]

LGTM

On Fri, Aug 12, 2016 at 02:04:42AM +0200, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> It is useful to know the reason why cpufreq_update_util() has just
> been called and that can be passed as flags to cpufreq_update_util()
> and to the ->func() callback in struct update_util_data.  However,
> doing that in addition to passing the util and max arguments they
> already take would be clumsy, so avoid it.
> 
> Instead, use the observation that the schedutil governor is part
> of the scheduler proper, so it can access scheduler data directly.
> This allows the util and max arguments of cpufreq_update_util()
> and the ->func() callback in struct update_util_data to be replaced
> with a flags one, but schedutil has to be modified to follow.
> 
> Thus make the schedutil governor obtain the CFS utilization
> information from the scheduler and use the "RT" and "DL" flags
> instead of the special utilization value of ULONG_MAX to track
> updates from the RT and DL sched classes.  Make it non-modular
> too to avoid having to export scheduler variables to modules at
> large.
> 
> Next, update all of the other users of cpufreq_update_util()
> and the ->func() callback in struct update_util_data accordingly.
> 
> Suggested-by: Peter Zijlstra <peterz@infradead.org>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> 
> v1 -> v2: Do not check cpu_of(rq) against smp_processor_id() in
>           cfs_rq_util_change().
> 
> ---
>  drivers/cpufreq/Kconfig            |    5 --
>  drivers/cpufreq/cpufreq_governor.c |    2 -
>  drivers/cpufreq/intel_pstate.c     |    2 -
>  include/linux/sched.h              |   12 ++++--
>  kernel/sched/cpufreq.c             |    2 -
>  kernel/sched/cpufreq_schedutil.c   |   67 ++++++++++++++++++++-----------------
>  kernel/sched/deadline.c            |    4 +-
>  kernel/sched/fair.c                |   10 +----
>  kernel/sched/rt.c                  |    4 +-
>  kernel/sched/sched.h               |   31 +++++------------
>  10 files changed, 66 insertions(+), 73 deletions(-)
> 
> Index: linux-pm/drivers/cpufreq/cpufreq_governor.c
> ===================================================================
> --- linux-pm.orig/drivers/cpufreq/cpufreq_governor.c
> +++ linux-pm/drivers/cpufreq/cpufreq_governor.c
> @@ -260,7 +260,7 @@ static void dbs_irq_work(struct irq_work
>  }
>  
>  static void dbs_update_util_handler(struct update_util_data *data, u64 time,
> -				    unsigned long util, unsigned long max)
> +				    unsigned int flags)
>  {
>  	struct cpu_dbs_info *cdbs = container_of(data, struct cpu_dbs_info, update_util);
>  	struct policy_dbs_info *policy_dbs = cdbs->policy_dbs;
> Index: linux-pm/drivers/cpufreq/intel_pstate.c
> ===================================================================
> --- linux-pm.orig/drivers/cpufreq/intel_pstate.c
> +++ linux-pm/drivers/cpufreq/intel_pstate.c
> @@ -1329,7 +1329,7 @@ static inline void intel_pstate_adjust_b
>  }
>  
>  static void intel_pstate_update_util(struct update_util_data *data, u64 time,
> -				     unsigned long util, unsigned long max)
> +				     unsigned int flags)
>  {
>  	struct cpudata *cpu = container_of(data, struct cpudata, update_util);
>  	u64 delta_ns = time - cpu->sample.time;
> Index: linux-pm/include/linux/sched.h
> ===================================================================
> --- linux-pm.orig/include/linux/sched.h
> +++ linux-pm/include/linux/sched.h
> @@ -3469,15 +3469,19 @@ static inline unsigned long rlimit_max(u
>  	return task_rlimit_max(current, limit);
>  }
>  
> +#define SCHED_CPUFREQ_RT	(1U << 0)
> +#define SCHED_CPUFREQ_DL	(1U << 1)
> +
> +#define SCHED_CPUFREQ_RT_DL	(SCHED_CPUFREQ_RT | SCHED_CPUFREQ_DL)
> +
>  #ifdef CONFIG_CPU_FREQ
>  struct update_util_data {
> -	void (*func)(struct update_util_data *data,
> -		     u64 time, unsigned long util, unsigned long max);
> +       void (*func)(struct update_util_data *data, u64 time, unsigned int flags);
>  };
>  
>  void cpufreq_add_update_util_hook(int cpu, struct update_util_data *data,
> -			void (*func)(struct update_util_data *data, u64 time,
> -				     unsigned long util, unsigned long max));
> +                       void (*func)(struct update_util_data *data, u64 time,
> +				    unsigned int flags));
>  void cpufreq_remove_update_util_hook(int cpu);
>  #endif /* CONFIG_CPU_FREQ */
>  
> Index: linux-pm/kernel/sched/cpufreq.c
> ===================================================================
> --- linux-pm.orig/kernel/sched/cpufreq.c
> +++ linux-pm/kernel/sched/cpufreq.c
> @@ -33,7 +33,7 @@ DEFINE_PER_CPU(struct update_util_data *
>   */
>  void cpufreq_add_update_util_hook(int cpu, struct update_util_data *data,
>  			void (*func)(struct update_util_data *data, u64 time,
> -				     unsigned long util, unsigned long max))
> +				     unsigned int flags))
>  {
>  	if (WARN_ON(!data || !func))
>  		return;
> Index: linux-pm/kernel/sched/cpufreq_schedutil.c
> ===================================================================
> --- linux-pm.orig/kernel/sched/cpufreq_schedutil.c
> +++ linux-pm/kernel/sched/cpufreq_schedutil.c
> @@ -12,7 +12,6 @@
>  #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>  
>  #include <linux/cpufreq.h>
> -#include <linux/module.h>
>  #include <linux/slab.h>
>  #include <trace/events/power.h>
>  
> @@ -53,6 +52,7 @@ struct sugov_cpu {
>  	unsigned long util;
>  	unsigned long max;
>  	u64 last_update;
> +	unsigned int flags;
>  };
>  
>  static DEFINE_PER_CPU(struct sugov_cpu, sugov_cpu);
> @@ -144,24 +144,39 @@ static unsigned int get_next_freq(struct
>  	return cpufreq_driver_resolve_freq(policy, freq);
>  }
>  
> +static void sugov_get_util(unsigned long *util, unsigned long *max)
> +{
> +	struct rq *rq = this_rq();
> +	unsigned long cfs_max = rq->cpu_capacity_orig;
> +
> +	*util = min(rq->cfs.avg.util_avg, cfs_max);
> +	*max = cfs_max;
> +}
> +
>  static void sugov_update_single(struct update_util_data *hook, u64 time,
> -				unsigned long util, unsigned long max)
> +				unsigned int flags)
>  {
>  	struct sugov_cpu *sg_cpu = container_of(hook, struct sugov_cpu, update_util);
>  	struct sugov_policy *sg_policy = sg_cpu->sg_policy;
>  	struct cpufreq_policy *policy = sg_policy->policy;
> +	unsigned long util, max;
>  	unsigned int next_f;
>  
>  	if (!sugov_should_update_freq(sg_policy, time))
>  		return;
>  
> -	next_f = util == ULONG_MAX ? policy->cpuinfo.max_freq :
> -			get_next_freq(sg_cpu, util, max);
> +	if (flags & SCHED_CPUFREQ_RT_DL) {
> +		next_f = policy->cpuinfo.max_freq;
> +	} else {
> +		sugov_get_util(&util, &max);
> +		next_f = get_next_freq(sg_cpu, util, max);
> +	}
>  	sugov_update_commit(sg_policy, time, next_f);
>  }
>  
>  static unsigned int sugov_next_freq_shared(struct sugov_cpu *sg_cpu,
> -					   unsigned long util, unsigned long max)
> +					   unsigned long util, unsigned long max,
> +					   unsigned int flags)
>  {
>  	struct sugov_policy *sg_policy = sg_cpu->sg_policy;
>  	struct cpufreq_policy *policy = sg_policy->policy;
> @@ -169,7 +184,7 @@ static unsigned int sugov_next_freq_shar
>  	u64 last_freq_update_time = sg_policy->last_freq_update_time;
>  	unsigned int j;
>  
> -	if (util == ULONG_MAX)
> +	if (flags & SCHED_CPUFREQ_RT_DL)
>  		return max_f;
>  
>  	for_each_cpu(j, policy->cpus) {
> @@ -192,10 +207,10 @@ static unsigned int sugov_next_freq_shar
>  		if (delta_ns > TICK_NSEC)
>  			continue;
>  
> -		j_util = j_sg_cpu->util;
> -		if (j_util == ULONG_MAX)
> +		if (j_sg_cpu->flags & SCHED_CPUFREQ_RT_DL)
>  			return max_f;
>  
> +		j_util = j_sg_cpu->util;
>  		j_max = j_sg_cpu->max;
>  		if (j_util * max > j_max * util) {
>  			util = j_util;
> @@ -207,20 +222,24 @@ static unsigned int sugov_next_freq_shar
>  }
>  
>  static void sugov_update_shared(struct update_util_data *hook, u64 time,
> -				unsigned long util, unsigned long max)
> +				unsigned int flags)
>  {
>  	struct sugov_cpu *sg_cpu = container_of(hook, struct sugov_cpu, update_util);
>  	struct sugov_policy *sg_policy = sg_cpu->sg_policy;
> +	unsigned long util, max;
>  	unsigned int next_f;
>  
> +	sugov_get_util(&util, &max);
> +
>  	raw_spin_lock(&sg_policy->update_lock);
>  
>  	sg_cpu->util = util;
>  	sg_cpu->max = max;
> +	sg_cpu->flags = flags;
>  	sg_cpu->last_update = time;
>  
>  	if (sugov_should_update_freq(sg_policy, time)) {
> -		next_f = sugov_next_freq_shared(sg_cpu, util, max);
> +		next_f = sugov_next_freq_shared(sg_cpu, util, max, flags);
>  		sugov_update_commit(sg_policy, time, next_f);
>  	}
>  
> @@ -444,8 +463,9 @@ static int sugov_start(struct cpufreq_po
>  
>  		sg_cpu->sg_policy = sg_policy;
>  		if (policy_is_shared(policy)) {
> -			sg_cpu->util = ULONG_MAX;
> +			sg_cpu->util = 0;
>  			sg_cpu->max = 0;
> +			sg_cpu->flags = SCHED_CPUFREQ_RT;
>  			sg_cpu->last_update = 0;
>  			sg_cpu->cached_raw_freq = 0;
>  			cpufreq_add_update_util_hook(cpu, &sg_cpu->update_util,
> @@ -495,28 +515,15 @@ static struct cpufreq_governor schedutil
>  	.limits = sugov_limits,
>  };
>  
> -static int __init sugov_module_init(void)
> -{
> -	return cpufreq_register_governor(&schedutil_gov);
> -}
> -
> -static void __exit sugov_module_exit(void)
> -{
> -	cpufreq_unregister_governor(&schedutil_gov);
> -}
> -
> -MODULE_AUTHOR("Rafael J. Wysocki <rafael.j.wysocki@intel.com>");
> -MODULE_DESCRIPTION("Utilization-based CPU frequency selection");
> -MODULE_LICENSE("GPL");
> -
>  #ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL
>  struct cpufreq_governor *cpufreq_default_governor(void)
>  {
>  	return &schedutil_gov;
>  }
> -
> -fs_initcall(sugov_module_init);
> -#else
> -module_init(sugov_module_init);
>  #endif
> -module_exit(sugov_module_exit);
> +
> +static int __init sugov_register(void)
> +{
> +	return cpufreq_register_governor(&schedutil_gov);
> +}
> +fs_initcall(sugov_register);
> Index: linux-pm/kernel/sched/fair.c
> ===================================================================
> --- linux-pm.orig/kernel/sched/fair.c
> +++ linux-pm/kernel/sched/fair.c
> @@ -2875,11 +2875,8 @@ static inline void update_tg_load_avg(st
>  
>  static inline void cfs_rq_util_change(struct cfs_rq *cfs_rq)
>  {
> -	struct rq *rq = rq_of(cfs_rq);
> -	int cpu = cpu_of(rq);
> -
> -	if (cpu == smp_processor_id() && &rq->cfs == cfs_rq) {
> -		unsigned long max = rq->cpu_capacity_orig;
> +	if (&this_rq()->cfs == cfs_rq) {
> +		struct rq *rq = rq_of(cfs_rq);
>  
>  		/*
>  		 * There are a few boundary cases this might miss but it should
> @@ -2897,8 +2894,7 @@ static inline void cfs_rq_util_change(st
>  		 *
>  		 * See cpu_util().
>  		 */
> -		cpufreq_update_util(rq_clock(rq),
> -				    min(cfs_rq->avg.util_avg, max), max);
> +		cpufreq_update_util(rq_clock(rq), 0);
>  	}
>  }
>  
> Index: linux-pm/kernel/sched/sched.h
> ===================================================================
> --- linux-pm.orig/kernel/sched/sched.h
> +++ linux-pm/kernel/sched/sched.h
> @@ -1764,26 +1764,12 @@ DECLARE_PER_CPU(struct update_util_data
>  /**
>   * cpufreq_update_util - Take a note about CPU utilization changes.
>   * @time: Current time.
> - * @util: Current utilization.
> - * @max: Utilization ceiling.
> + * @flags: Update reason flags.
>   *
> - * This function is called by the scheduler on every invocation of
> - * update_load_avg() on the CPU whose utilization is being updated.
> + * This function is called by the scheduler on the CPU whose utilization is
> + * being updated.
>   *
>   * It can only be called from RCU-sched read-side critical sections.
> - */
> -static inline void cpufreq_update_util(u64 time, unsigned long util, unsigned long max)
> -{
> -       struct update_util_data *data;
> -
> -       data = rcu_dereference_sched(*this_cpu_ptr(&cpufreq_update_util_data));
> -       if (data)
> -               data->func(data, time, util, max);
> -}
> -
> -/**
> - * cpufreq_trigger_update - Trigger CPU performance state evaluation if needed.
> - * @time: Current time.
>   *
>   * The way cpufreq is currently arranged requires it to evaluate the CPU
>   * performance state (frequency/voltage) on a regular basis to prevent it from
> @@ -1797,13 +1783,16 @@ static inline void cpufreq_update_util(u
>   * but that really is a band-aid.  Going forward it should be replaced with
>   * solutions targeted more specifically at RT and DL tasks.
>   */
> -static inline void cpufreq_trigger_update(u64 time)
> +static inline void cpufreq_update_util(u64 time, unsigned int flags)
>  {
> -	cpufreq_update_util(time, ULONG_MAX, 0);
> +	struct update_util_data *data;
> +
> +	data = rcu_dereference_sched(*this_cpu_ptr(&cpufreq_update_util_data));
> +	if (data)
> +		data->func(data, time, flags);
>  }
>  #else
> -static inline void cpufreq_update_util(u64 time, unsigned long util, unsigned long max) {}
> -static inline void cpufreq_trigger_update(u64 time) {}
> +static inline void cpufreq_update_util(u64 time, unsigned int flags) {}
>  #endif /* CONFIG_CPU_FREQ */
>  
>  #ifdef arch_scale_freq_capacity
> Index: linux-pm/kernel/sched/deadline.c
> ===================================================================
> --- linux-pm.orig/kernel/sched/deadline.c
> +++ linux-pm/kernel/sched/deadline.c
> @@ -732,9 +732,9 @@ static void update_curr_dl(struct rq *rq
>  		return;
>  	}
>  
> -	/* kick cpufreq (see the comment in linux/cpufreq.h). */
> +	/* kick cpufreq (see the comment in kernel/sched/sched.h). */
>  	if (cpu_of(rq) == smp_processor_id())
> -		cpufreq_trigger_update(rq_clock(rq));
> +		cpufreq_update_util(rq_clock(rq), SCHED_CPUFREQ_DL);
>  
>  	schedstat_set(curr->se.statistics.exec_max,
>  		      max(curr->se.statistics.exec_max, delta_exec));
> Index: linux-pm/kernel/sched/rt.c
> ===================================================================
> --- linux-pm.orig/kernel/sched/rt.c
> +++ linux-pm/kernel/sched/rt.c
> @@ -957,9 +957,9 @@ static void update_curr_rt(struct rq *rq
>  	if (unlikely((s64)delta_exec <= 0))
>  		return;
>  
> -	/* Kick cpufreq (see the comment in linux/cpufreq.h). */
> +	/* Kick cpufreq (see the comment in kernel/sched/sched.h). */
>  	if (cpu_of(rq) == smp_processor_id())
> -		cpufreq_trigger_update(rq_clock(rq));
> +		cpufreq_update_util(rq_clock(rq), SCHED_CPUFREQ_RT);
>  
>  	schedstat_set(curr->se.statistics.exec_max,
>  		      max(curr->se.statistics.exec_max, delta_exec));
> Index: linux-pm/drivers/cpufreq/Kconfig
> ===================================================================
> --- linux-pm.orig/drivers/cpufreq/Kconfig
> +++ linux-pm/drivers/cpufreq/Kconfig
> @@ -194,7 +194,7 @@ config CPU_FREQ_GOV_CONSERVATIVE
>  	  If in doubt, say N.
>  
>  config CPU_FREQ_GOV_SCHEDUTIL
> -	tristate "'schedutil' cpufreq policy governor"
> +	bool "'schedutil' cpufreq policy governor"
>  	depends on CPU_FREQ && SMP
>  	select CPU_FREQ_GOV_ATTR_SET
>  	select IRQ_WORK
> @@ -208,9 +208,6 @@ config CPU_FREQ_GOV_SCHEDUTIL
>  	  frequency tipping point is at utilization/capacity equal to 80% in
>  	  both cases.
>  
> -	  To compile this driver as a module, choose M here: the module will
> -	  be called cpufreq_schedutil.
> -
>  	  If in doubt, say N.
>  
>  comment "CPU frequency scaling drivers"

Re: [PATCH v2 2/2] cpufreq / sched: Pass runqueue pointer to cpufreq_update_util()

[Steve Muckle]

LGTM

On Fri, Aug 12, 2016 at 02:06:44AM +0200, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> All of the callers of cpufreq_update_util() pass rq_clock(rq) to it
> as the time argument and some of them check whether or not cpu_of(rq)
> is equal to smp_processor_id() before calling it, so rework it to
> take a runqueue pointer as the argument and move the rq_clock(rq)
> evaluation into it.
> 
> Additionally, provide a wrapper checking cpu_of(rq) against
> smp_processor_id() for the cpufreq_update_util() callers that
> need it.
> 
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> 
> This is a new patch based on the [2/2] from v1.
> 
> ---
>  kernel/sched/deadline.c |    3 +--
>  kernel/sched/fair.c     |    4 +---
>  kernel/sched/rt.c       |    3 +--
>  kernel/sched/sched.h    |   15 +++++++++++----
>  4 files changed, 14 insertions(+), 11 deletions(-)
> 
> Index: linux-pm/kernel/sched/deadline.c
> ===================================================================
> --- linux-pm.orig/kernel/sched/deadline.c
> +++ linux-pm/kernel/sched/deadline.c
> @@ -733,8 +733,7 @@ static void update_curr_dl(struct rq *rq
>  	}
>  
>  	/* kick cpufreq (see the comment in kernel/sched/sched.h). */
> -	if (cpu_of(rq) == smp_processor_id())
> -		cpufreq_update_util(rq_clock(rq), SCHED_CPUFREQ_DL);
> +	cpufreq_update_this_cpu(rq, SCHED_CPUFREQ_DL);
>  
>  	schedstat_set(curr->se.statistics.exec_max,
>  		      max(curr->se.statistics.exec_max, delta_exec));
> Index: linux-pm/kernel/sched/fair.c
> ===================================================================
> --- linux-pm.orig/kernel/sched/fair.c
> +++ linux-pm/kernel/sched/fair.c
> @@ -2876,8 +2876,6 @@ static inline void update_tg_load_avg(st
>  static inline void cfs_rq_util_change(struct cfs_rq *cfs_rq)
>  {
>  	if (&this_rq()->cfs == cfs_rq) {
> -		struct rq *rq = rq_of(cfs_rq);
> -
>  		/*
>  		 * There are a few boundary cases this might miss but it should
>  		 * get called often enough that that should (hopefully) not be
> @@ -2894,7 +2892,7 @@ static inline void cfs_rq_util_change(st
>  		 *
>  		 * See cpu_util().
>  		 */
> -		cpufreq_update_util(rq_clock(rq), 0);
> +		cpufreq_update_util(rq_of(cfs_rq), 0);
>  	}
>  }
>  
> Index: linux-pm/kernel/sched/rt.c
> ===================================================================
> --- linux-pm.orig/kernel/sched/rt.c
> +++ linux-pm/kernel/sched/rt.c
> @@ -958,8 +958,7 @@ static void update_curr_rt(struct rq *rq
>  		return;
>  
>  	/* Kick cpufreq (see the comment in kernel/sched/sched.h). */
> -	if (cpu_of(rq) == smp_processor_id())
> -		cpufreq_update_util(rq_clock(rq), SCHED_CPUFREQ_RT);
> +	cpufreq_update_this_cpu(rq, SCHED_CPUFREQ_RT);
>  
>  	schedstat_set(curr->se.statistics.exec_max,
>  		      max(curr->se.statistics.exec_max, delta_exec));
> Index: linux-pm/kernel/sched/sched.h
> ===================================================================
> --- linux-pm.orig/kernel/sched/sched.h
> +++ linux-pm/kernel/sched/sched.h
> @@ -1763,7 +1763,7 @@ DECLARE_PER_CPU(struct update_util_data
>  
>  /**
>   * cpufreq_update_util - Take a note about CPU utilization changes.
> - * @time: Current time.
> + * @rq: Runqueue to carry out the update for.
>   * @flags: Update reason flags.
>   *
>   * This function is called by the scheduler on the CPU whose utilization is
> @@ -1783,16 +1783,23 @@ DECLARE_PER_CPU(struct update_util_data
>   * but that really is a band-aid.  Going forward it should be replaced with
>   * solutions targeted more specifically at RT and DL tasks.
>   */
> -static inline void cpufreq_update_util(u64 time, unsigned int flags)
> +static inline void cpufreq_update_util(struct rq *rq, unsigned int flags)
>  {
>  	struct update_util_data *data;
>  
>  	data = rcu_dereference_sched(*this_cpu_ptr(&cpufreq_update_util_data));
>  	if (data)
> -		data->func(data, time, flags);
> +		data->func(data, rq_clock(rq), flags);
> +}
> +
> +static inline void cpufreq_update_this_cpu(struct rq *rq, unsigned int flags)
> +{
> +	if (cpu_of(rq) == smp_processor_id())
> +		cpufreq_update_util(rq, flags);
>  }
>  #else
> -static inline void cpufreq_update_util(u64 time, unsigned int flags) {}
> +static inline void cpufreq_update_util(struct rq *rq, unsigned int flags) {}
> +static inline void cpufreq_update_this_cpu(struct rq *rq, unsigned int flags) {}
>  #endif /* CONFIG_CPU_FREQ */
>  
>  #ifdef arch_scale_freq_capacity
> 

Re: [PATCH v2 0/2] cpufreq / sched: Rework of cpufreq_update_util() arguments

[Viresh Kumar]

On 12-08-16, 02:01, Rafael J. Wysocki wrote:
> Hi,
> 
> There were some comments on the "cpufreq / sched: cpufreq_update_util() flags
> and iowait boosting" series I sent some time ago and I wanted to address them,
> but for this purpose I had to combine patches [1-2,4/7] from that series
> into one and make some changes on top of that.
> 
> Then I thought it would be better to send that separately from the iowait
> boost part of that series, so here it goes.
> 
> [1/2] Removes the util and max args from cpufreq_update_util() and governor
>       callbacks and adds a flags argument instead of them.  That argument
>       is then used to handle RT and DL in schedutil and the utilization data
>       are accessed by it directly (so it is non-modular now to avoid exporting
>       the scheduler internals to modules).
> [2/2] Replaces the time argument of cpufreq_update_util() with an rq pointer
>       which allows some simplifications to be made.
> 
> There should be no changes in behavior as a result of this.
> 
> The v2 is to address comments from Steve.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

Re: [PATCH v2 0/2] cpufreq / sched: Rework of cpufreq_update_util() arguments

[Peter Zijlstra]

On Fri, Aug 12, 2016 at 02:01:29AM +0200, Rafael J. Wysocki wrote:
> Hi,
> 
> There were some comments on the "cpufreq / sched: cpufreq_update_util() flags
> and iowait boosting" series I sent some time ago and I wanted to address them,
> but for this purpose I had to combine patches [1-2,4/7] from that series
> into one and make some changes on top of that.
> 
> Then I thought it would be better to send that separately from the iowait
> boost part of that series, so here it goes.
> 
> [1/2] Removes the util and max args from cpufreq_update_util() and governor
>       callbacks and adds a flags argument instead of them.  That argument
>       is then used to handle RT and DL in schedutil and the utilization data
>       are accessed by it directly (so it is non-modular now to avoid exporting
>       the scheduler internals to modules).
> [2/2] Replaces the time argument of cpufreq_update_util() with an rq pointer
>       which allows some simplifications to be made.
> 
> There should be no changes in behavior as a result of this.
> 
> The v2 is to address comments from Steve.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>

Re: [PATCH v2 1/2] cpufreq / sched: Pass flags to cpufreq_update_util()

[Krzysztof Kozlowski]

On Fri, Aug 12, 2016 at 2:04 AM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> It is useful to know the reason why cpufreq_update_util() has just
> been called and that can be passed as flags to cpufreq_update_util()
> and to the ->func() callback in struct update_util_data.  However,
> doing that in addition to passing the util and max arguments they
> already take would be clumsy, so avoid it.
>
> Instead, use the observation that the schedutil governor is part
> of the scheduler proper, so it can access scheduler data directly.
> This allows the util and max arguments of cpufreq_update_util()
> and the ->func() callback in struct update_util_data to be replaced
> with a flags one, but schedutil has to be modified to follow.
>
> Thus make the schedutil governor obtain the CFS utilization
> information from the scheduler and use the "RT" and "DL" flags
> instead of the special utilization value of ULONG_MAX to track
> updates from the RT and DL sched classes.  Make it non-modular
> too to avoid having to export scheduler variables to modules at
> large.
>
> Next, update all of the other users of cpufreq_update_util()
> and the ->func() callback in struct update_util_data accordingly.
>
> Suggested-by: Peter Zijlstra <peterz@infradead.org>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
>
> v1 -> v2: Do not check cpu_of(rq) against smp_processor_id() in
>           cfs_rq_util_change().
>
> ---
>  drivers/cpufreq/Kconfig            |    5 --
>  drivers/cpufreq/cpufreq_governor.c |    2 -
>  drivers/cpufreq/intel_pstate.c     |    2 -
>  include/linux/sched.h              |   12 ++++--
>  kernel/sched/cpufreq.c             |    2 -
>  kernel/sched/cpufreq_schedutil.c   |   67 ++++++++++++++++++++-----------------
>  kernel/sched/deadline.c            |    4 +-
>  kernel/sched/fair.c                |   10 +----
>  kernel/sched/rt.c                  |    4 +-
>  kernel/sched/sched.h               |   31 +++++------------
>  10 files changed, 66 insertions(+), 73 deletions(-)

(...)

> --- linux-pm.orig/drivers/cpufreq/Kconfig
> +++ linux-pm/drivers/cpufreq/Kconfig
> @@ -194,7 +194,7 @@ config CPU_FREQ_GOV_CONSERVATIVE
>           If in doubt, say N.
>
>  config CPU_FREQ_GOV_SCHEDUTIL
> -       tristate "'schedutil' cpufreq policy governor"
> +       bool "'schedutil' cpufreq policy governor"

If you change such symbols please remember to update also all the
defconfigs. Without the update they start to show errors.

Best regards,
Krzysztof

Re: [PATCH v2 1/2] cpufreq / sched: Pass flags to cpufreq_update_util()

[Rafael J. Wysocki]

On Friday, August 19, 2016 03:26:21 PM Krzysztof Kozlowski wrote:
> On Fri, Aug 12, 2016 at 2:04 AM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >
> > It is useful to know the reason why cpufreq_update_util() has just
> > been called and that can be passed as flags to cpufreq_update_util()
> > and to the ->func() callback in struct update_util_data.  However,
> > doing that in addition to passing the util and max arguments they
> > already take would be clumsy, so avoid it.
> >
> > Instead, use the observation that the schedutil governor is part
> > of the scheduler proper, so it can access scheduler data directly.
> > This allows the util and max arguments of cpufreq_update_util()
> > and the ->func() callback in struct update_util_data to be replaced
> > with a flags one, but schedutil has to be modified to follow.
> >
> > Thus make the schedutil governor obtain the CFS utilization
> > information from the scheduler and use the "RT" and "DL" flags
> > instead of the special utilization value of ULONG_MAX to track
> > updates from the RT and DL sched classes.  Make it non-modular
> > too to avoid having to export scheduler variables to modules at
> > large.
> >
> > Next, update all of the other users of cpufreq_update_util()
> > and the ->func() callback in struct update_util_data accordingly.
> >
> > Suggested-by: Peter Zijlstra <peterz@infradead.org>
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > ---
> >
> > v1 -> v2: Do not check cpu_of(rq) against smp_processor_id() in
> >           cfs_rq_util_change().
> >
> > ---
> >  drivers/cpufreq/Kconfig            |    5 --
> >  drivers/cpufreq/cpufreq_governor.c |    2 -
> >  drivers/cpufreq/intel_pstate.c     |    2 -
> >  include/linux/sched.h              |   12 ++++--
> >  kernel/sched/cpufreq.c             |    2 -
> >  kernel/sched/cpufreq_schedutil.c   |   67 ++++++++++++++++++++-----------------
> >  kernel/sched/deadline.c            |    4 +-
> >  kernel/sched/fair.c                |   10 +----
> >  kernel/sched/rt.c                  |    4 +-
> >  kernel/sched/sched.h               |   31 +++++------------
> >  10 files changed, 66 insertions(+), 73 deletions(-)
> 
> (...)
> 
> > --- linux-pm.orig/drivers/cpufreq/Kconfig
> > +++ linux-pm/drivers/cpufreq/Kconfig
> > @@ -194,7 +194,7 @@ config CPU_FREQ_GOV_CONSERVATIVE
> >           If in doubt, say N.
> >
> >  config CPU_FREQ_GOV_SCHEDUTIL
> > -       tristate "'schedutil' cpufreq policy governor"
> > +       bool "'schedutil' cpufreq policy governor"
> 
> If you change such symbols please remember to update also all the
> defconfigs. Without the update they start to show errors.

Are there defconfigs that use this particular one?

Thanks,
Rafael

Re: [PATCH v2 1/2] cpufreq / sched: Pass flags to cpufreq_update_util()

[Krzysztof Kozlowski]

On Sat, Aug 20, 2016 at 03:08:01AM +0200, Rafael J. Wysocki wrote:
> On Friday, August 19, 2016 03:26:21 PM Krzysztof Kozlowski wrote:
> > On Fri, Aug 12, 2016 at 2:04 AM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > >
> > > It is useful to know the reason why cpufreq_update_util() has just
> > > been called and that can be passed as flags to cpufreq_update_util()
> > > and to the ->func() callback in struct update_util_data.  However,
> > > doing that in addition to passing the util and max arguments they
> > > already take would be clumsy, so avoid it.
> > >
> > > Instead, use the observation that the schedutil governor is part
> > > of the scheduler proper, so it can access scheduler data directly.
> > > This allows the util and max arguments of cpufreq_update_util()
> > > and the ->func() callback in struct update_util_data to be replaced
> > > with a flags one, but schedutil has to be modified to follow.
> > >
> > > Thus make the schedutil governor obtain the CFS utilization
> > > information from the scheduler and use the "RT" and "DL" flags
> > > instead of the special utilization value of ULONG_MAX to track
> > > updates from the RT and DL sched classes.  Make it non-modular
> > > too to avoid having to export scheduler variables to modules at
> > > large.
> > >
> > > Next, update all of the other users of cpufreq_update_util()
> > > and the ->func() callback in struct update_util_data accordingly.
> > >
> > > Suggested-by: Peter Zijlstra <peterz@infradead.org>
> > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > > ---
> > >
> > > v1 -> v2: Do not check cpu_of(rq) against smp_processor_id() in
> > >           cfs_rq_util_change().
> > >
> > > ---
> > >  drivers/cpufreq/Kconfig            |    5 --
> > >  drivers/cpufreq/cpufreq_governor.c |    2 -
> > >  drivers/cpufreq/intel_pstate.c     |    2 -
> > >  include/linux/sched.h              |   12 ++++--
> > >  kernel/sched/cpufreq.c             |    2 -
> > >  kernel/sched/cpufreq_schedutil.c   |   67 ++++++++++++++++++++-----------------
> > >  kernel/sched/deadline.c            |    4 +-
> > >  kernel/sched/fair.c                |   10 +----
> > >  kernel/sched/rt.c                  |    4 +-
> > >  kernel/sched/sched.h               |   31 +++++------------
> > >  10 files changed, 66 insertions(+), 73 deletions(-)
> > 
> > (...)
> > 
> > > --- linux-pm.orig/drivers/cpufreq/Kconfig
> > > +++ linux-pm/drivers/cpufreq/Kconfig
> > > @@ -194,7 +194,7 @@ config CPU_FREQ_GOV_CONSERVATIVE
> > >           If in doubt, say N.
> > >
> > >  config CPU_FREQ_GOV_SCHEDUTIL
> > > -       tristate "'schedutil' cpufreq policy governor"
> > > +       bool "'schedutil' cpufreq policy governor"
> > 
> > If you change such symbols please remember to update also all the
> > defconfigs. Without the update they start to show errors.
> 
> Are there defconfigs that use this particular one?

Yes, ARM/multi_v7 and exynos were using this as module. Javier sent a
patch for that and should be switched to builtin in upcoming next [1].

If you would like to base on top of that, let me know, so I would
prepare a tag.

Best regards,
Krzysztof

[1] https://git.kernel.org/cgit/linux/kernel/git/krzk/linux.git/commit/?h=for-v4.9/defconfig-cpufreq-schedutil-builtin&id=08023fb9cec03ee2992df51fa728c3f14a1ba0ea

Re: [PATCH v2 1/2] cpufreq / sched: Pass flags to cpufreq_update_util()

[Rafael J. Wysocki]

On Saturday, August 20, 2016 05:40:49 PM Krzysztof Kozlowski wrote:
> On Sat, Aug 20, 2016 at 03:08:01AM +0200, Rafael J. Wysocki wrote:
> > On Friday, August 19, 2016 03:26:21 PM Krzysztof Kozlowski wrote:
> > > On Fri, Aug 12, 2016 at 2:04 AM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> > > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > > >
> > > > It is useful to know the reason why cpufreq_update_util() has just
> > > > been called and that can be passed as flags to cpufreq_update_util()
> > > > and to the ->func() callback in struct update_util_data.  However,
> > > > doing that in addition to passing the util and max arguments they
> > > > already take would be clumsy, so avoid it.
> > > >
> > > > Instead, use the observation that the schedutil governor is part
> > > > of the scheduler proper, so it can access scheduler data directly.
> > > > This allows the util and max arguments of cpufreq_update_util()
> > > > and the ->func() callback in struct update_util_data to be replaced
> > > > with a flags one, but schedutil has to be modified to follow.
> > > >
> > > > Thus make the schedutil governor obtain the CFS utilization
> > > > information from the scheduler and use the "RT" and "DL" flags
> > > > instead of the special utilization value of ULONG_MAX to track
> > > > updates from the RT and DL sched classes.  Make it non-modular
> > > > too to avoid having to export scheduler variables to modules at
> > > > large.
> > > >
> > > > Next, update all of the other users of cpufreq_update_util()
> > > > and the ->func() callback in struct update_util_data accordingly.
> > > >
> > > > Suggested-by: Peter Zijlstra <peterz@infradead.org>
> > > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > > > ---
> > > >
> > > > v1 -> v2: Do not check cpu_of(rq) against smp_processor_id() in
> > > >           cfs_rq_util_change().
> > > >
> > > > ---
> > > >  drivers/cpufreq/Kconfig            |    5 --
> > > >  drivers/cpufreq/cpufreq_governor.c |    2 -
> > > >  drivers/cpufreq/intel_pstate.c     |    2 -
> > > >  include/linux/sched.h              |   12 ++++--
> > > >  kernel/sched/cpufreq.c             |    2 -
> > > >  kernel/sched/cpufreq_schedutil.c   |   67 ++++++++++++++++++++-----------------
> > > >  kernel/sched/deadline.c            |    4 +-
> > > >  kernel/sched/fair.c                |   10 +----
> > > >  kernel/sched/rt.c                  |    4 +-
> > > >  kernel/sched/sched.h               |   31 +++++------------
> > > >  10 files changed, 66 insertions(+), 73 deletions(-)
> > > 
> > > (...)
> > > 
> > > > --- linux-pm.orig/drivers/cpufreq/Kconfig
> > > > +++ linux-pm/drivers/cpufreq/Kconfig
> > > > @@ -194,7 +194,7 @@ config CPU_FREQ_GOV_CONSERVATIVE
> > > >           If in doubt, say N.
> > > >
> > > >  config CPU_FREQ_GOV_SCHEDUTIL
> > > > -       tristate "'schedutil' cpufreq policy governor"
> > > > +       bool "'schedutil' cpufreq policy governor"
> > > 
> > > If you change such symbols please remember to update also all the
> > > defconfigs. Without the update they start to show errors.
> > 
> > Are there defconfigs that use this particular one?
> 
> Yes, ARM/multi_v7 and exynos were using this as module. Javier sent a
> patch for that and should be switched to builtin in upcoming next [1].
> 
> If you would like to base on top of that, let me know, so I would
> prepare a tag.

I wouldn't like to rebase, but I can pull that branch depending on how
much more material there is on it.

Thanks,
Rafael

Re: [PATCH v2 1/2] cpufreq / sched: Pass flags to cpufreq_update_util()

[Krzysztof Kozlowski]

On Mon, Aug 22, 2016 at 07:30:36PM +0200, Rafael J. Wysocki wrote:
> On Saturday, August 20, 2016 05:40:49 PM Krzysztof Kozlowski wrote:
> > On Sat, Aug 20, 2016 at 03:08:01AM +0200, Rafael J. Wysocki wrote:
> > > On Friday, August 19, 2016 03:26:21 PM Krzysztof Kozlowski wrote:
> > > > On Fri, Aug 12, 2016 at 2:04 AM, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
> > > > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > > > >
> > > > > It is useful to know the reason why cpufreq_update_util() has just
> > > > > been called and that can be passed as flags to cpufreq_update_util()
> > > > > and to the ->func() callback in struct update_util_data.  However,
> > > > > doing that in addition to passing the util and max arguments they
> > > > > already take would be clumsy, so avoid it.
> > > > >
> > > > > Instead, use the observation that the schedutil governor is part
> > > > > of the scheduler proper, so it can access scheduler data directly.
> > > > > This allows the util and max arguments of cpufreq_update_util()
> > > > > and the ->func() callback in struct update_util_data to be replaced
> > > > > with a flags one, but schedutil has to be modified to follow.
> > > > >
> > > > > Thus make the schedutil governor obtain the CFS utilization
> > > > > information from the scheduler and use the "RT" and "DL" flags
> > > > > instead of the special utilization value of ULONG_MAX to track
> > > > > updates from the RT and DL sched classes.  Make it non-modular
> > > > > too to avoid having to export scheduler variables to modules at
> > > > > large.
> > > > >
> > > > > Next, update all of the other users of cpufreq_update_util()
> > > > > and the ->func() callback in struct update_util_data accordingly.
> > > > >
> > > > > Suggested-by: Peter Zijlstra <peterz@infradead.org>
> > > > > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > > > > ---
> > > > >
> > > > > v1 -> v2: Do not check cpu_of(rq) against smp_processor_id() in
> > > > >           cfs_rq_util_change().
> > > > >
> > > > > ---
> > > > >  drivers/cpufreq/Kconfig            |    5 --
> > > > >  drivers/cpufreq/cpufreq_governor.c |    2 -
> > > > >  drivers/cpufreq/intel_pstate.c     |    2 -
> > > > >  include/linux/sched.h              |   12 ++++--
> > > > >  kernel/sched/cpufreq.c             |    2 -
> > > > >  kernel/sched/cpufreq_schedutil.c   |   67 ++++++++++++++++++++-----------------
> > > > >  kernel/sched/deadline.c            |    4 +-
> > > > >  kernel/sched/fair.c                |   10 +----
> > > > >  kernel/sched/rt.c                  |    4 +-
> > > > >  kernel/sched/sched.h               |   31 +++++------------
> > > > >  10 files changed, 66 insertions(+), 73 deletions(-)
> > > > 
> > > > (...)
> > > > 
> > > > > --- linux-pm.orig/drivers/cpufreq/Kconfig
> > > > > +++ linux-pm/drivers/cpufreq/Kconfig
> > > > > @@ -194,7 +194,7 @@ config CPU_FREQ_GOV_CONSERVATIVE
> > > > >           If in doubt, say N.
> > > > >
> > > > >  config CPU_FREQ_GOV_SCHEDUTIL
> > > > > -       tristate "'schedutil' cpufreq policy governor"
> > > > > +       bool "'schedutil' cpufreq policy governor"
> > > > 
> > > > If you change such symbols please remember to update also all the
> > > > defconfigs. Without the update they start to show errors.
> > > 
> > > Are there defconfigs that use this particular one?
> > 
> > Yes, ARM/multi_v7 and exynos were using this as module. Javier sent a
> > patch for that and should be switched to builtin in upcoming next [1].
> > 
> > If you would like to base on top of that, let me know, so I would
> > prepare a tag.
> 
> I wouldn't like to rebase, but I can pull that branch depending on how
> much more material there is on it.

Not much, I put only the fix m->y on a separate branch. Anyway if you
need it, here it is:


The following changes since commit 29b4817d4018df78086157ea3a55c1d9424a7cfc:

  Linux 4.8-rc1 (2016-08-07 18:18:00 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-defconfig-schedutil-4.9

for you to fetch changes up to 08023fb9cec03ee2992df51fa728c3f14a1ba0ea:

  ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module (2016-08-19 17:50:13 +0200)

----------------------------------------------------------------
The schedutil cpufreq governor will be switched from tristate to bool. Fix
defconfigs.

----------------------------------------------------------------
Javier Martinez Canillas (2):
      ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module
      ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module

 arch/arm/configs/exynos_defconfig   | 2 +-
 arch/arm/configs/multi_v7_defconfig | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)