Re: [RFC PATCH 0/4] thermal: Introduce support for monitoring falling temperature

[Daniel Lezcano <daniel.lezcano@linaro.org>]

On 10/07/2020 15:51, Thara Gopinath wrote:
> Thermal framework today supports monitoring for rising temperatures and
> subsequently initiating cooling action in case of a thermal trip point
> being crossed. There are scenarios where a SoC need some warming action to
> be activated if the temperature falls below a cetain permissible limit.
> Since warming action can be considered mirror opposite of cooling action,
> most of the thermal framework can be re-used to achieve this.
> 
> This patch series is yet another attempt to add support for monitoring
> falling temperature in thermal framework. Unlike the first attempt[1]
> (where a new property was added to thermal trip point binding to indicate
> direction of temperature monitoring), this series introduces a new trip
> point type (THERMAL_TRIP_COLD) to indicate a trip point at which falling
> temperature monitoring must be triggered. This patch series uses Daniel
> Lezcano's recently added thermal genetlink interface[2] to notify userspace
> of falling temperature and rising temperature at the cold trip point. This
> will enable a user space engine to trigger the relevant mitigation for
> falling temperature. At present, no support is added to any of the thermal
> governors to monitor and mitigate falling temperature at the cold trip
> point;rather all governors return doing nothing if triggered for a cold
> trip point. As future extension, monitoring of falling temperature can be
> added to the relevant thermal governor. 

I agree we need a cold trip point in order to introduce the functioning
temperature range in the thermal framework.

Rui, what is your opinion ?



-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog