From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com,
niklas.soderlund+renesas@ragnatech.se
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: [PATCH v3 30/31] rcar-csi2: expose the subdevice internal routing
Date: Tue, 5 Mar 2019 19:51:49 +0100 [thread overview]
Message-ID: <20190305185150.20776-31-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20190305185150.20776-1-jacopo+renesas@jmondi.org>
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Expose the subdevice internal routing from the single multiplexed sink
pad to its source pads by implementing .get_routing(). This information
is used to do link validation at stream start and allows user-space to
view the route configuration.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
drivers/media/platform/rcar-vin/rcar-csi2.c | 53 +++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index f9cc99ba00bc..cc7077b40f18 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -341,6 +341,14 @@ static int rcsi2_pad_to_vc(unsigned int pad)
return pad - RCAR_CSI2_SOURCE_VC0;
}
+static int rcsi2_vc_to_pad(unsigned int vc)
+{
+ if (vc > 3)
+ return -EINVAL;
+
+ return vc + RCAR_CSI2_SOURCE_VC0;
+}
+
struct rcar_csi2_info {
int (*init_phtw)(struct rcar_csi2 *priv, unsigned int mbps);
int (*confirm_start)(struct rcar_csi2 *priv);
@@ -705,9 +713,54 @@ static const struct v4l2_subdev_video_ops rcar_csi2_video_ops = {
.s_stream = rcsi2_s_stream,
};
+static int rcsi2_get_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_krouting *routing)
+{
+ struct v4l2_subdev_route *r = routing->routes;
+ struct rcar_csi2 *priv = sd_to_csi2(sd);
+ struct v4l2_mbus_frame_desc fd;
+ unsigned int i;
+ int ret;
+
+ /* Get information about multiplexed link */
+ ret = rcsi2_get_remote_frame_desc(priv, &fd);
+ if (ret)
+ return ret;
+
+ if (routing->num_routes < fd.num_entries) {
+ routing->num_routes = fd.num_entries;
+ return -ENOSPC;
+ }
+
+ routing->num_routes = fd.num_entries;
+
+ for (i = 0; i < fd.num_entries; i++) {
+ struct v4l2_mbus_frame_desc_entry *entry = &fd.entry[i];
+ int source_pad;
+
+ source_pad = rcsi2_vc_to_pad(entry->bus.csi2.channel);
+ if (source_pad < 0) {
+ dev_err(priv->dev, "Virtual Channel out of range: %u\n",
+ entry->bus.csi2.channel);
+ return -EINVAL;
+ }
+
+ r->sink_pad = RCAR_CSI2_SINK;
+ r->sink_stream = entry->stream;
+ r->source_pad = source_pad;
+ r->source_stream = 0;
+ r->flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE |
+ V4L2_SUBDEV_ROUTE_FL_IMMUTABLE;
+ r++;
+ }
+
+ return 0;
+}
+
static const struct v4l2_subdev_pad_ops rcar_csi2_pad_ops = {
.set_fmt = rcsi2_set_pad_format,
.get_fmt = rcsi2_get_pad_format,
+ .get_routing = rcsi2_get_routing,
};
static const struct v4l2_subdev_ops rcar_csi2_subdev_ops = {
--
2.20.1
next prev parent reply other threads:[~2019-03-05 18:52 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-05 18:51 [PATCH v3 00/31] v4l: add support for multiplexed streams Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 01/31] media: entity: Use pad as a starting point for graph walk Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 02/31] media: entity: Use pads instead of entities in the media graph walk stack Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 03/31] media: entity: Walk the graph based on pads Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 04/31] v4l: mc: Start walk from a specific pad in use count calculation Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 05/31] media: entity: Add iterator helper for entity pads Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 06/31] media: entity: Move the pipeline from entity to pads Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 07/31] media: entity: Use pad as the starting point for a pipeline Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 08/31] media: entity: Add has_route entity operation Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 09/31] media: entity: Add media_has_route() function Jacopo Mondi
2019-03-14 14:45 ` Luca Ceresoli
2019-03-15 9:22 ` Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 10/31] media: entity: Use routing information during graph traversal Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 11/31] media: entity: Skip link validation for pads to which there is no route to Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 12/31] media: entity: Add an iterator helper for connected pads Jacopo Mondi
2019-03-07 10:09 ` Sakari Ailus
2019-03-07 10:27 ` Ian Arkver
2019-03-07 12:38 ` Sakari Ailus
2019-03-07 20:18 ` Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 13/31] media: entity: Add only connected pads to the pipeline Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 14/31] media: entity: Add debug information in graph walk route check Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 15/31] v4l: Add bus type to frame descriptors Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 16/31] v4l: Add CSI-2 bus configuration " Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 17/31] v4l: Add stream to frame descriptor Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 18/31] v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 19/31] media: Documentation: Add GS_ROUTING documentation Jacopo Mondi
2019-03-07 15:19 ` Sakari Ailus
2019-03-08 13:31 ` Jacopo Mondi
2019-03-08 14:14 ` Sakari Ailus
2019-03-14 14:44 ` Luca Ceresoli
2019-03-14 14:43 ` Luca Ceresoli
2020-02-13 13:36 ` Hans Verkuil
2019-03-05 18:51 ` [PATCH v3 20/31] v4l: subdev: Take routing information into account in link validation Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 21/31] v4l: subdev: Improve link format validation debug messages Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 22/31] v4l: mc: Add an S_ROUTING helper function for power state changes Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 23/31] adv748x: csi2: add translation from pixelcode to CSI-2 datatype Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 24/31] adv748x: csi2: only allow formats on sink pads Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 25/31] adv748x: csi2: describe the multiplexed stream Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 26/31] adv748x: csi2: add internal routing configuration Jacopo Mondi
2019-03-14 14:45 ` Luca Ceresoli
2019-03-15 9:45 ` Jacopo Mondi
2019-03-15 10:06 ` Sakari Ailus
2019-03-16 10:23 ` Luca Ceresoli
2019-03-20 17:14 ` Jacopo Mondi
2019-03-22 16:52 ` Luca Ceresoli
2019-03-28 15:08 ` Jacopo Mondi
2019-03-28 15:17 ` Luca Ceresoli
2019-03-05 18:51 ` [PATCH v3 27/31] adv748x: afe: add routing support Jacopo Mondi
2019-03-05 18:51 ` [PATCH v3 28/31] adv748x: afe: Implement has_route() Jacopo Mondi
2019-03-07 12:49 ` Sakari Ailus
2019-03-14 14:45 ` Luca Ceresoli
2019-03-05 18:51 ` [PATCH v3 29/31] rcar-csi2: use frame description information to configure CSI-2 bus Jacopo Mondi
2019-03-05 18:51 ` Jacopo Mondi [this message]
2019-03-05 18:51 ` [PATCH v3 31/31] media: rcar-csi2: Implement has_route() Jacopo Mondi
2019-03-07 12:56 ` Sakari Ailus
2019-03-07 22:28 ` Jacopo Mondi
2019-03-07 9:47 ` [PATCH v3 00/31] v4l: add support for multiplexed streams Sakari Ailus
2019-03-08 13:19 ` Jacopo Mondi
2019-03-08 14:12 ` Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190305185150.20776-31-jacopo+renesas@jmondi.org \
--to=jacopo+renesas@jmondi.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).