linux-renesas-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: marek.vasut@gmail.com
To: linux-pci@vger.kernel.org
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Phil Edworthy <phil.edworthy@renesas.com>,
	Simon Horman <horms+renesas@verge.net.au>,
	Wolfram Sang <wsa@the-dreams.de>,
	linux-renesas-soc@vger.kernel.org
Subject: [PATCH V4 3/6] PCI: rcar: Replace various variable types with unsigned ones for register values
Date: Mon, 25 Mar 2019 12:40:58 +0100	[thread overview]
Message-ID: <20190325114101.10198-3-marek.vasut@gmail.com> (raw)
In-Reply-To: <20190325114101.10198-1-marek.vasut@gmail.com>

From: Marek Vasut <marek.vasut+renesas@gmail.com>

Replace various variable types with u32 or unsigned int type for
variables holding register values, since the registers are 32bit.
Note that rcar_pcie_msi_irq() still uses various variable types
because both find_first_bit() and __fls() require various variable
types as an argument.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
To: linux-pci@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
V2: - s@unsigned long@various variable types@ in the commit message
    - Replace int with unsigned int for the $shift variable
    - Replace int with unsigned int / u32 in rcar_pcie_config_access()
V3: - Change shift from u32 to unsigned int
    - Change addr and data in phy_write_reg() from unsigned int to u32
V4: - Change reg to unsigned int in rcar_pcie_config_access()
---
 drivers/pci/controller/pcie-rcar.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index 3db693b4410e..6699211fdc9a 100644
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -170,7 +170,7 @@ enum {
 
 static void rcar_rmw32(struct rcar_pcie *pcie, int where, u32 mask, u32 data)
 {
-	int shift = 8 * (where & 3);
+	unsigned int shift = 8 * (where & 3);
 	u32 val = rcar_pci_read_reg(pcie, where & ~3);
 
 	val &= ~(mask << shift);
@@ -180,7 +180,7 @@ static void rcar_rmw32(struct rcar_pcie *pcie, int where, u32 mask, u32 data)
 
 static u32 rcar_read_conf(struct rcar_pcie *pcie, int where)
 {
-	int shift = 8 * (where & 3);
+	unsigned int shift = 8 * (where & 3);
 	u32 val = rcar_pci_read_reg(pcie, where & ~3);
 
 	return val >> shift;
@@ -191,7 +191,7 @@ static int rcar_pcie_config_access(struct rcar_pcie *pcie,
 		unsigned char access_type, struct pci_bus *bus,
 		unsigned int devfn, int where, u32 *data)
 {
-	int dev, func, reg, index;
+	unsigned int dev, func, reg, index;
 
 	dev = PCI_SLOT(devfn);
 	func = PCI_FUNC(devfn);
@@ -295,8 +295,9 @@ static int rcar_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
 				int where, int size, u32 val)
 {
 	struct rcar_pcie *pcie = bus->sysdata;
-	int shift, ret;
+	unsigned int shift;
 	u32 data;
+	int ret;
 
 	ret = rcar_pcie_config_access(pcie, RCAR_PCI_ACCESS_READ,
 				      bus, devfn, where, &data);
@@ -506,10 +507,10 @@ static int phy_wait_for_ack(struct rcar_pcie *pcie)
 }
 
 static void phy_write_reg(struct rcar_pcie *pcie,
-				 unsigned int rate, unsigned int addr,
-				 unsigned int lane, unsigned int data)
+			  unsigned int rate, u32 addr,
+			  unsigned int lane, u32 data)
 {
-	unsigned long phyaddr;
+	u32 phyaddr;
 
 	phyaddr = WRITE_CMD |
 		((rate & 1) << RATE_POS) |
@@ -1117,7 +1118,7 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct rcar_pcie *pcie;
-	unsigned int data;
+	u32 data;
 	int err;
 	int (*phy_init_fn)(struct rcar_pcie *);
 	struct pci_host_bridge *bridge;
-- 
2.20.1


  parent reply	other threads:[~2019-03-25 11:41 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-25 11:40 [PATCH V4 1/6] PCI: rcar: Clean up remaining macros defining bits marek.vasut
2019-03-25 11:40 ` [PATCH V4 2/6] PCI: rcar: Replace unsigned long with u32/unsigned int in register accessors marek.vasut
2019-03-27 11:24   ` Simon Horman
2019-03-25 11:40 ` marek.vasut [this message]
2019-03-27 11:25   ` [PATCH V4 3/6] PCI: rcar: Replace various variable types with unsigned ones for register values Simon Horman
2019-03-25 11:40 ` [PATCH V4 4/6] PCI: rcar: Replace (8 * n) with (BITS_PER_BYTE * n) marek.vasut
2019-03-25 11:45   ` Geert Uytterhoeven
2019-03-27 11:26   ` Simon Horman
2019-03-25 11:41 ` [PATCH V4 5/6] PCI: rcar: Clean up debug messages marek.vasut
2019-03-27 11:27   ` Simon Horman
2019-03-25 11:41 ` [PATCH V4 6/6] PCI: rcar: Fix 64bit MSI message address handling marek.vasut
2019-03-27 11:30   ` Simon Horman
2019-03-27 12:22     ` Geert Uytterhoeven
2019-03-28  3:03       ` Marek Vasut
2019-03-28  8:02         ` Geert Uytterhoeven
2019-03-28 16:28           ` Lorenzo Pieralisi
2019-03-28 16:31             ` Geert Uytterhoeven
2019-03-29  9:53               ` Marek Vasut
2019-03-29 19:32   ` Geert Uytterhoeven
2019-03-30  7:45     ` Marek Vasut
2019-03-26 13:04 ` [PATCH V4 1/6] PCI: rcar: Clean up remaining macros defining bits Lorenzo Pieralisi
2019-03-26 16:48   ` Marek Vasut
2019-03-27 11:24 ` Simon Horman
2019-03-29 14:09 ` Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190325114101.10198-3-marek.vasut@gmail.com \
    --to=marek.vasut@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=horms+renesas@verge.net.au \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=marek.vasut+renesas@gmail.com \
    --cc=phil.edworthy@renesas.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).