* [PATCH v3] arm64: dts: renesas: r8a779a0: Add GPIO nodes
@ 2021-01-14 11:11 Geert Uytterhoeven
0 siblings, 0 replies; only message in thread
From: Geert Uytterhoeven @ 2021-01-14 11:11 UTC (permalink / raw)
To: Magnus Damm
Cc: linux-renesas-soc, linux-arm-kernel, Geert Uytterhoeven, Wolfram Sang
Add device nodes for the General Purpose Input/Output (GPIO) block on
the Renesas R-Car V3U (r8a779a0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
To be queued in renesas-devel for v5.12.
v3:
- Drop obsolete paragraph about commented-out "gpio-ranges"
properties,
v2:
- Add Tested-by,
- Fix "V3u" typo in patch description,
- Uncomment "gpio-ranges" properties,
- Verified resets values.
---
arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 140 ++++++++++++++++++++++
1 file changed, 140 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 6ac2c9d37acd55ae..66b47a848443c2a5 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -89,6 +89,146 @@ pfc: pin-controller@e6050000 {
<0 0xe6069000 0 0x16c>, <0 0xe6069800 0 0x16c>;
};
+ gpio0: gpio@e6058180 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6058180 0 0x54>;
+ interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 916>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 0 28>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@e6050180 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6050180 0 0x54>;
+ interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 32 31>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@e6050980 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6050980 0 0x54>;
+ interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 64 25>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@e6058980 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6058980 0 0x54>;
+ interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 916>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 916>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 96 17>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@e6060180 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6060180 0 0x54>;
+ interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 128 27>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@e6060980 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6060980 0 0x54>;
+ interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 160 21>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@e6068180 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6068180 0 0x54>;
+ interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 192 21>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio7: gpio@e6068980 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6068980 0 0x54>;
+ interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 224 21>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio8: gpio@e6069180 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6069180 0 0x54>;
+ interrupts = <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 256 21>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio9: gpio@e6069980 {
+ compatible = "renesas,gpio-r8a779a0";
+ reg = <0 0xe6069980 0 0x54>;
+ interrupts = <GIC_SPI 868 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 288 21>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a779a0-cpg-mssr";
reg = <0 0xe6150000 0 0x4000>;
--
2.25.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2021-01-14 11:12 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-14 11:11 [PATCH v3] arm64: dts: renesas: r8a779a0: Add GPIO nodes Geert Uytterhoeven
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).