From: Biju Das <biju.das.jz@bp.renesas.com>
To: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
Rob Herring <robh+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
linux-renesas-soc@vger.kernel.org, linux-phy@lists.infradead.org,
Geert Uytterhoeven <geert+renesas@glider.be>,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>,
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v5 0/6] Add USB2.0 support
Date: Tue, 27 Jul 2021 19:55:21 +0100 [thread overview]
Message-ID: <20210727185527.19907-1-biju.das.jz@bp.renesas.com> (raw)
This patch series aims to add USB2.0 Host and device support for RZ/G2L SoC.
v4->v5:
* Removed USBPHY control and binding patches as it is accepted for reset/next
* Removed USB ehci/ohci binding patches as it is accepted for usb/next.
* Updated Renesas USB2.0 PHY bindings to just use 'resets' as required.
* Added interrupts maxitems=1 for SoC other than RZ/G2L for Renesas USBHS bindings
* Updated the commit description for USB2.0 PHY driver patch.
v3->v4:
* Added Rob's Acked-by tag for generic-{ohci,ehci} binding patch
* Added Rob's Rb tag for RZ/G2L USBPHY control binding patch
* Incorporated Philipp's review comments for USBPHY control driver.
* Dropped second reset from usb2-phy binding patch
* Added maxitems as per Rob's review comment.
v2->v3
* USBPHY Control IP modelled as reset bindings as per Rob's suggestion
* Updated the binding patches
* Incorporated Geert's and Shimoda-San's review comment for phy driver patch.
v1->v2
* Updated usb phy control bindings with clock definitions
* Updated generic ohci/ehci bindings to support RZ/G2L SoC
* Incorporated vinod's review comment on usb phy control driver
* Add support for USB2.0 device and OTG support.
Biju Das (6):
arm64: configs: defconfig: Enable RZ/G2L USBPHY control driver
dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings
phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/G2L
arm64: dts: renesas: r9a07g044: Add USB2.0 phy and host support
dt-bindings: usb: renesas,usbhs: Document RZ/G2L bindings
arm64: dts: renesas: r9a07g044: Add USB2.0 device support
.../bindings/phy/renesas,usb2-phy.yaml | 15 +++
.../bindings/usb/renesas,usbhs.yaml | 26 +++-
arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 113 ++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 97 +++++++++++----
5 files changed, 226 insertions(+), 26 deletions(-)
--
2.17.1
next reply other threads:[~2021-07-27 18:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-27 18:55 Biju Das [this message]
2021-07-27 18:55 ` [PATCH v5 1/6] arm64: configs: defconfig: Enable RZ/G2L USBPHY control driver Biju Das
2021-07-27 18:55 ` [PATCH v5 2/6] dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings Biju Das
2021-08-02 20:55 ` Rob Herring
2021-08-04 9:38 ` Yoshihiro Shimoda
2021-08-06 12:42 ` Vinod Koul
2021-07-27 18:55 ` [PATCH v5 3/6] phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/G2L Biju Das
2021-08-04 9:38 ` Yoshihiro Shimoda
2021-08-06 12:43 ` Vinod Koul
2021-07-27 18:55 ` [PATCH v5 4/6] arm64: dts: renesas: r9a07g044: Add USB2.0 phy and host support Biju Das
2021-08-10 10:19 ` Geert Uytterhoeven
2021-08-12 7:17 ` Biju Das
2021-07-27 18:55 ` [PATCH v5 5/6] dt-bindings: usb: renesas,usbhs: Document RZ/G2L bindings Biju Das
2021-08-02 20:56 ` Rob Herring
2021-07-27 18:55 ` [PATCH v5 6/6] arm64: dts: renesas: r9a07g044: Add USB2.0 device support Biju Das
2021-08-10 10:20 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210727185527.19907-1-biju.das.jz@bp.renesas.com \
--to=biju.das.jz@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=biju.das@bp.renesas.com \
--cc=geert+renesas@glider.be \
--cc=kishon@ti.com \
--cc=linux-phy@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).