From: Biju Das <biju.das.jz@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>
Cc: Biju Das <biju.das.jz@bp.renesas.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
Chris Paterson <Chris.Paterson2@renesas.com>,
Biju Das <biju.das@bp.renesas.com>,
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v5 4/6] arm64: dts: renesas: r9a07g044: Add USB2.0 phy and host support
Date: Tue, 27 Jul 2021 19:55:25 +0100 [thread overview]
Message-ID: <20210727185527.19907-5-biju.das.jz@bp.renesas.com> (raw)
In-Reply-To: <20210727185527.19907-1-biju.das.jz@bp.renesas.com>
Add USB2.0 phy and host support to SoC DT.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v4->v5:
* No change.
V3->v4:
* Removed second reset from phy node.
V3:
* Added reset entries
* Updated compatible, phy and reset entries.
---
arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 94 ++++++++++++++++++++++
1 file changed, 94 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 9a7489dc70d1..f0dcd086ba20 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -200,6 +200,100 @@
<0x0 0x11940000 0 0x60000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
};
+
+ phyrst: usbphy-ctrl@11c40000 {
+ compatible = "renesas,r9a07g044-usbphy-ctrl",
+ "renesas,rzg2l-usbphy-ctrl";
+ reg = <0 0x11c40000 0 0x10000>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>;
+ resets = <&cpg R9A07G044_USB_PRESETN>;
+ power-domains = <&cpg>;
+ #reset-cells = <1>;
+ };
+
+ ohci0: usb@11c50000 {
+ compatible = "generic-ohci";
+ reg = <0 0x11c50000 0 0x100>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+ resets = <&phyrst 0>,
+ <&cpg R9A07G044_USB_U2H0_HRESETN>;
+ phys = <&usb2_phy0 1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ohci1: usb@11c70000 {
+ compatible = "generic-ohci";
+ reg = <0 0x11c70000 0 0x100>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+ resets = <&phyrst 1>,
+ <&cpg R9A07G044_USB_U2H1_HRESETN>;
+ phys = <&usb2_phy1 1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci0: usb@11c50100 {
+ compatible = "generic-ehci";
+ reg = <0 0x11c50100 0 0x100>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+ resets = <&phyrst 0>,
+ <&cpg R9A07G044_USB_U2H0_HRESETN>;
+ phys = <&usb2_phy0 2>;
+ phy-names = "usb";
+ companion = <&ohci0>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci1: usb@11c70100 {
+ compatible = "generic-ehci";
+ reg = <0 0x11c70100 0 0x100>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+ resets = <&phyrst 1>,
+ <&cpg R9A07G044_USB_U2H1_HRESETN>;
+ phys = <&usb2_phy1 2>;
+ phy-names = "usb";
+ companion = <&ohci1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb2_phy0: usb-phy@11c50200 {
+ compatible = "renesas,usb2-phy-r9a07g044",
+ "renesas,rzg2l-usb2-phy";
+ reg = <0 0x11c50200 0 0x700>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+ resets = <&phyrst 0>;
+ #phy-cells = <1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb2_phy1: usb-phy@11c70200 {
+ compatible = "renesas,usb2-phy-r9a07g044",
+ "renesas,rzg2l-usb2-phy";
+ reg = <0 0x11c70200 0 0x700>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+ resets = <&phyrst 1>;
+ #phy-cells = <1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
};
timer {
--
2.17.1
next prev parent reply other threads:[~2021-07-27 18:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-27 18:55 [PATCH v5 0/6] Add USB2.0 support Biju Das
2021-07-27 18:55 ` [PATCH v5 1/6] arm64: configs: defconfig: Enable RZ/G2L USBPHY control driver Biju Das
2021-07-27 18:55 ` [PATCH v5 2/6] dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings Biju Das
2021-08-02 20:55 ` Rob Herring
2021-08-04 9:38 ` Yoshihiro Shimoda
2021-08-06 12:42 ` Vinod Koul
2021-07-27 18:55 ` [PATCH v5 3/6] phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/G2L Biju Das
2021-08-04 9:38 ` Yoshihiro Shimoda
2021-08-06 12:43 ` Vinod Koul
2021-07-27 18:55 ` Biju Das [this message]
2021-08-10 10:19 ` [PATCH v5 4/6] arm64: dts: renesas: r9a07g044: Add USB2.0 phy and host support Geert Uytterhoeven
2021-08-12 7:17 ` Biju Das
2021-07-27 18:55 ` [PATCH v5 5/6] dt-bindings: usb: renesas,usbhs: Document RZ/G2L bindings Biju Das
2021-08-02 20:56 ` Rob Herring
2021-07-27 18:55 ` [PATCH v5 6/6] arm64: dts: renesas: r9a07g044: Add USB2.0 device support Biju Das
2021-08-10 10:20 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210727185527.19907-5-biju.das.jz@bp.renesas.com \
--to=biju.das.jz@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=biju.das@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).