[PATCH] ARM: dts: iwg20d-q7-common: Fix backlight pwm specifier

[PATCH] ARM: dts: iwg20d-q7-common: Fix backlight pwm specifier

[Geert Uytterhoeven]

make dtbs_check:

    arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7.dtb: backlight: pwms: [[58, 0, 5000000], [0]] is too long
	    From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
    arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7-dbcm-ca.dtb: backlight: pwms: [[67, 0, 5000000], [0]] is too long
	    From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
    arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7-dbcm-ca.dtb: backlight: pwms: [[67, 0, 5000000], [0]] is too long
	    From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
    arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7.dtb: backlight: pwms: [[58, 0, 5000000], [0]] is too long
	    From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml

PWM specifiers referring to R-Car PWM Timer Controllers should contain
only two cells.

Fix this by dropping the bogus third cell.

Fixes: 6f89dd9e9325d05b ("ARM: dts: iwg20d-q7-common: Add LCD support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Presumably copied from a board using the TPU, which uses 3 cells.

To be queued in renesas-devel-for-v6.5.
---
 arch/arm/boot/dts/iwg20d-q7-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 03caea6fc6ffa4cf..4351c5a02fa596de 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -49,7 +49,7 @@ audio_clock: audio_clock {
 	lcd_backlight: backlight {
 		compatible = "pwm-backlight";
 
-		pwms = <&pwm3 0 5000000 0>;
+		pwms = <&pwm3 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 		enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
-- 
2.34.1