From: Prabhakar <prabhakar.csengg@gmail.com>
To: Arnd Bergmann <arnd@arndb.de>,
Conor Dooley <conor.dooley@microchip.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Heiko Stuebner <heiko@sntech.de>, Guo Ren <guoren@kernel.org>,
Andrew Jones <ajones@ventanamicro.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Samuel Holland <samuel@sholland.org>,
linux-riscv@lists.infradead.org
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-renesas-soc@vger.kernel.org,
Prabhakar <prabhakar.csengg@gmail.com>,
Biju Das <biju.das.jz@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v8 0/7] Add non-coherent DMA support for AX45MP
Date: Wed, 12 Apr 2023 12:08:53 +0100 [thread overview]
Message-ID: <20230412110900.69738-1-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Hi All,
non-coherent DMA support for AX45MP
====================================
On the Andes AX45MP core, cache coherency is a specification option so it
may not be supported. In this case DMA will fail. To get around with this
issue this patch series does the below:
1] Andes alternative ports is implemented as errata which checks if the IOCP
is missing and only then applies to CMO errata. One vendor specific SBI EXT
(ANDES_SBI_EXT_IOCP_SW_WORKAROUND) is implemented as part of errata.
Below are the configs which Andes port provides (and are selected by RZ/Five):
- ERRATA_ANDES
- ERRATA_ANDES_CMO
OpenSBI patch supporting ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI can be found here,
https://patchwork.ozlabs.org/project/opensbi/patch/20230317140357.14819-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
2] Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
OpenSBI configures the PMA regions as required and creates a reserve memory
node and propagates it to the higher boot stack.
Currently OpenSBI (upstream) configures the required PMA region and passes
this a shared DMA pool to Linux.
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
The above shared DMA pool gets appended to Linux DTB so the DMA memory
requests go through this region.
3] We provide callbacks to synchronize specific content between memory and
cache.
4] RZ/Five SoC selects the below configs
- AX45MP_L2_CACHE
- DMA_GLOBAL_POOL
- ERRATA_ANDES
- ERRATA_ANDES_CMO
----------x---------------------x--------------------x---------------x--------------
Note,
- This series requires testing on Cores with zicbom and T-Head SoCs
- Ive used GCC 12.2.0 for compilation
- Tested all the IP blocks on RZ/Five which use DMA
- Patch series is dependent on the series from Arnd,
https://patchwork.kernel.org/project/linux-riscv/cover/20230327121317.4081816-1-arnd@kernel.org/
- Patches applies on top of palmer/for-next (d34a6b715a23)
v7 -> v8
* Dropped using function pointers and switched to ALTERNATIVE_X()
* Added new patches (#1, #2)
v6 -> v7
* Reworked the code based on Arnd's work
* Fixed review comments pointed by Arnd
* Fixed review comments pointed by Conor
v5.1 -> v6
* Dropped use of ALTERNATIVE_x() macro
* Now switched to used function pointers for CMO
* Moved driver to drivers/cache folder
v5 -> v5.1
* https://patchwork.kernel.org/project/linux-riscv/list/?series=708610&state=%2A&archive=both
v4 -> v5
* Rebased ALTERNATIVE_3() macro on top of Andrew's patches
* Rebased the changes on top of Heiko's alternative call patches
* Dropped configuring the PMA from Linux
* Dropped configuring the L2 cache from Linux and dropped the binding for same
* Now using runtime patching mechanism instead of compile time config
RFC v3 -> v4
* Implemented ALTERNATIVE_3() macro
* Now using runtime patching mechanism instead of compile time config
* Added Andes CMO as and errata
* Fixed comments pointed by Geert
RFC v2-> RFC v3
* Fixed review comments pointed by Conor
* Move DT binding into cache folder
* Fixed DT binding check issue
* Added andestech,ax45mp-cache.h header file
* Now passing the flags for the PMA setup as part of andestech,pma-regions
property.
* Added andestech,inst/data-prefetch and andestech,tag/data-ram-ctl
properties to configure the L2 cache.
* Registered the cache driver as platform driver
RFC v1-> RFC v2
* Moved out the code from arc/riscv to drivers/soc/renesas
* Now handling the PMA setup as part of the L2 cache
* Now making use of dma-noncoherent.c instead SoC specific implementation.
* Dropped arch_dma_alloc() and arch_dma_free()
* Switched to RISCV_DMA_NONCOHERENT
* Included DT binding doc
RFC v2: https://patchwork.kernel.org/project/linux-renesas-soc/cover/20221003223222.448551-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
RFC v1: https://patchwork.kernel.org/project/linux-renesas-soc/cover/20220906102154.32526-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
Cheers,
Prabhakar
Lad Prabhakar (7):
riscv: asm: alternative-macros: Introduce ALTERNATIVE_3() macro
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
riscv: errata: Add Andes alternative ports
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding
documentation for L2 cache controller
cache: Add L2 cache management for Andes AX45MP RISC-V core
riscv: errata: Hookup the Andes AX45MP non-coherent handling
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
.../cache/andestech,ax45mp-cache.yaml | 81 +++++++
MAINTAINERS | 7 +
arch/riscv/Kconfig.errata | 21 ++
arch/riscv/errata/Makefile | 1 +
arch/riscv/errata/andes/Makefile | 1 +
arch/riscv/errata/andes/errata.c | 104 ++++++++
arch/riscv/include/asm/alternative-macros.h | 51 +++-
arch/riscv/include/asm/alternative.h | 3 +
arch/riscv/include/asm/cacheflush.h | 9 +
arch/riscv/include/asm/errata_list.h | 38 ++-
arch/riscv/include/asm/vendorid_list.h | 1 +
arch/riscv/kernel/alternative.c | 5 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/cache/Kconfig | 10 +
drivers/cache/Makefile | 3 +
drivers/cache/ax45mp_cache.c | 222 ++++++++++++++++++
drivers/soc/renesas/Kconfig | 4 +
18 files changed, 552 insertions(+), 12 deletions(-)
create mode 100644 Documentation/devicetree/bindings/cache/andestech,ax45mp-cache.yaml
create mode 100644 arch/riscv/errata/andes/Makefile
create mode 100644 arch/riscv/errata/andes/errata.c
create mode 100644 drivers/cache/Kconfig
create mode 100644 drivers/cache/Makefile
create mode 100644 drivers/cache/ax45mp_cache.c
--
2.25.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next reply other threads:[~2023-04-12 11:09 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-12 11:08 Prabhakar [this message]
2023-04-12 11:08 ` [PATCH v8 1/7] riscv: asm: alternative-macros: Introduce ALTERNATIVE_3() macro Prabhakar
2023-04-12 11:08 ` [PATCH v8 2/7] riscv: asm: vendorid_list: Add Andes Technology to the vendors list Prabhakar
2023-04-17 8:52 ` Geert Uytterhoeven
2023-04-12 11:08 ` [PATCH v8 3/7] riscv: errata: Add Andes alternative ports Prabhakar
2023-04-12 11:08 ` [PATCH v8 4/7] dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller Prabhakar
2023-04-12 11:08 ` [PATCH v8 5/7] cache: Add L2 cache management for Andes AX45MP RISC-V core Prabhakar
2023-04-12 20:25 ` Conor Dooley
2023-04-13 7:06 ` Conor Dooley
2023-04-13 18:26 ` Lad, Prabhakar
2023-04-13 18:46 ` Conor Dooley
2023-04-13 21:06 ` Lad, Prabhakar
2023-04-14 18:59 ` Lad, Prabhakar
2023-04-12 11:08 ` [PATCH v8 6/7] riscv: errata: Hookup the Andes AX45MP non-coherent handling Prabhakar
2023-04-12 20:29 ` Conor Dooley
2023-04-12 11:09 ` [PATCH v8 7/7] soc: renesas: Kconfig: Select the required configs for RZ/Five SoC Prabhakar
2023-04-12 20:32 ` [PATCH v8 0/7] Add non-coherent DMA support for AX45MP Conor Dooley
2023-04-17 6:53 ` Christoph Hellwig
2023-04-19 15:59 ` Palmer Dabbelt
2023-04-20 6:09 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230412110900.69738-1-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.csengg@gmail.com \
--cc=ajones@ventanamicro.com \
--cc=aou@eecs.berkeley.edu \
--cc=arnd@arndb.de \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=guoren@kernel.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
--cc=samuel@sholland.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).