linux-riscv.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Minda Chen <minda.chen@starfivetech.com>
To: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: "Conor Dooley" <conor@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Daire McNamara" <daire.mcnamara@microchip.com>,
	"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-riscv@lists.infradead.org"
	<linux-riscv@lists.infradead.org>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	"Paul Walmsley" <paul.walmsley@sifive.com>,
	"Palmer Dabbelt" <palmer@dabbelt.com>,
	"Albert Ou" <aou@eecs.berkeley.edu>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Mason Huo" <mason.huo@starfivetech.com>,
	"Leyfoon Tan" <leyfoon.tan@starfivetech.com>,
	"Kevin Xie" <kevin.xie@starfivetech.com>
Subject: Re: [PATCH v15,RESEND 03/23] PCI: microchip: Move PLDA IP register macros to pcie-plda.h
Date: Thu, 29 Feb 2024 10:52:06 +0000	[thread overview]
Message-ID: <SHXPR01MB08639980F82FD130F9CD4D73E65FA@SHXPR01MB0863.CHNPR01.prod.partner.outlook.cn> (raw)
In-Reply-To: <ZeBYZtxqqXn5TlvL@lpieralisi>



> 
> On Tue, Feb 27, 2024 at 06:35:02PM +0800, Minda Chen wrote:
> > Move PLDA PCIe host controller IP registers macros to pcie-plda.h,
> > including bridge registers and PLDA IRQ event number.
> >
> > Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
> > Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> > ---
> >  MAINTAINERS                                   |   8 ++
> >  .../pci/controller/plda/pcie-microchip-host.c | 108 +++---------------
> >  drivers/pci/controller/plda/pcie-plda.h       | 108 ++++++++++++++++++
> >  3 files changed, 132 insertions(+), 92 deletions(-)  create mode
> > 100644 drivers/pci/controller/plda/pcie-plda.h
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS index
> > 9f7e907c8749..fc9576e69a71 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -16814,6 +16814,14 @@ S:	Maintained
> >  F:	Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
> >  F:	drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
> >
> > +PCI DRIVER FOR PLDA PCIE IP
> > +M:	Daire McNamara <daire.mcnamara@microchip.com>
> > +M:	Kevin Xie <kevin.xie@starfivetech.com>
> > +L:	linux-pci@vger.kernel.org
> > +S:	Maintained
> > +F:	Documentation/devicetree/bindings/pci/plda,*
> 
> This is an unrelated change. It belongs to the patch adding DT bindings or I am
> reading it wrong ?
> 
> Lorenzo
> 
You are right. Thanks
Moveing "F: Documentation/devicetree/bindings/pci/plda,*" to 1st patch is better.
This patch just add " F:	drivers/pci/controller/plda/*plda*"

> > +F:	drivers/pci/controller/plda/*plda*
> > +
> >  PCI DRIVER FOR RENESAS R-CAR
> >  M:	Marek Vasut <marek.vasut+renesas@gmail.com>
> >  M:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> > diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c
> > b/drivers/pci/controller/plda/pcie-microchip-host.c
> > index cb09a8137e25..d9030d550482 100644
> > --- a/drivers/pci/controller/plda/pcie-microchip-host.c
> > +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
> > @@ -19,6 +19,7 @@
> >  #include <linux/platform_device.h>
> >
> >  #include "../../pci.h"
> > +#include "pcie-plda.h"
> >
> >  /* Number of MSI IRQs */
> >  #define MC_MAX_NUM_MSI_IRQS			32
> > @@ -30,84 +31,6 @@
> >  #define MC_PCIE_BRIDGE_ADDR			(MC_PCIE1_BRIDGE_ADDR)
> >  #define MC_PCIE_CTRL_ADDR			(MC_PCIE1_CTRL_ADDR)
> >
> > -/* PCIe Bridge Phy Regs */
> > -#define PCIE_PCI_IRQ_DW0			0xa8
> > -#define  MSIX_CAP_MASK				BIT(31)
> > -#define  NUM_MSI_MSGS_MASK			GENMASK(6, 4)
> > -#define  NUM_MSI_MSGS_SHIFT			4
> > -
> > -#define IMASK_LOCAL				0x180
> > -#define  DMA_END_ENGINE_0_MASK			0x00000000u
> > -#define  DMA_END_ENGINE_0_SHIFT			0
> > -#define  DMA_END_ENGINE_1_MASK			0x00000000u
> > -#define  DMA_END_ENGINE_1_SHIFT			1
> > -#define  DMA_ERROR_ENGINE_0_MASK		0x00000100u
> > -#define  DMA_ERROR_ENGINE_0_SHIFT		8
> > -#define  DMA_ERROR_ENGINE_1_MASK		0x00000200u
> > -#define  DMA_ERROR_ENGINE_1_SHIFT		9
> > -#define  A_ATR_EVT_POST_ERR_MASK		0x00010000u
> > -#define  A_ATR_EVT_POST_ERR_SHIFT		16
> > -#define  A_ATR_EVT_FETCH_ERR_MASK		0x00020000u
> > -#define  A_ATR_EVT_FETCH_ERR_SHIFT		17
> > -#define  A_ATR_EVT_DISCARD_ERR_MASK		0x00040000u
> > -#define  A_ATR_EVT_DISCARD_ERR_SHIFT		18
> > -#define  A_ATR_EVT_DOORBELL_MASK		0x00000000u
> > -#define  A_ATR_EVT_DOORBELL_SHIFT		19
> > -#define  P_ATR_EVT_POST_ERR_MASK		0x00100000u
> > -#define  P_ATR_EVT_POST_ERR_SHIFT		20
> > -#define  P_ATR_EVT_FETCH_ERR_MASK		0x00200000u
> > -#define  P_ATR_EVT_FETCH_ERR_SHIFT		21
> > -#define  P_ATR_EVT_DISCARD_ERR_MASK		0x00400000u
> > -#define  P_ATR_EVT_DISCARD_ERR_SHIFT		22
> > -#define  P_ATR_EVT_DOORBELL_MASK		0x00000000u
> > -#define  P_ATR_EVT_DOORBELL_SHIFT		23
> > -#define  PM_MSI_INT_INTA_MASK			0x01000000u
> > -#define  PM_MSI_INT_INTA_SHIFT			24
> > -#define  PM_MSI_INT_INTB_MASK			0x02000000u
> > -#define  PM_MSI_INT_INTB_SHIFT			25
> > -#define  PM_MSI_INT_INTC_MASK			0x04000000u
> > -#define  PM_MSI_INT_INTC_SHIFT			26
> > -#define  PM_MSI_INT_INTD_MASK			0x08000000u
> > -#define  PM_MSI_INT_INTD_SHIFT			27
> > -#define  PM_MSI_INT_INTX_MASK			0x0f000000u
> > -#define  PM_MSI_INT_INTX_SHIFT			24
> > -#define  PM_MSI_INT_MSI_MASK			0x10000000u
> > -#define  PM_MSI_INT_MSI_SHIFT			28
> > -#define  PM_MSI_INT_AER_EVT_MASK		0x20000000u
> > -#define  PM_MSI_INT_AER_EVT_SHIFT		29
> > -#define  PM_MSI_INT_EVENTS_MASK			0x40000000u
> > -#define  PM_MSI_INT_EVENTS_SHIFT		30
> > -#define  PM_MSI_INT_SYS_ERR_MASK		0x80000000u
> > -#define  PM_MSI_INT_SYS_ERR_SHIFT		31
> > -#define  NUM_LOCAL_EVENTS			15
> > -#define ISTATUS_LOCAL				0x184
> > -#define IMASK_HOST				0x188
> > -#define ISTATUS_HOST				0x18c
> > -#define IMSI_ADDR				0x190
> > -#define ISTATUS_MSI				0x194
> > -
> > -/* PCIe Master table init defines */
> > -#define ATR0_PCIE_WIN0_SRCADDR_PARAM		0x600u
> > -#define  ATR0_PCIE_ATR_SIZE			0x25
> > -#define  ATR0_PCIE_ATR_SIZE_SHIFT		1
> > -#define ATR0_PCIE_WIN0_SRC_ADDR			0x604u
> > -#define ATR0_PCIE_WIN0_TRSL_ADDR_LSB		0x608u
> > -#define ATR0_PCIE_WIN0_TRSL_ADDR_UDW		0x60cu
> > -#define ATR0_PCIE_WIN0_TRSL_PARAM		0x610u
> > -
> > -/* PCIe AXI slave table init defines */
> > -#define ATR0_AXI4_SLV0_SRCADDR_PARAM		0x800u
> > -#define  ATR_SIZE_SHIFT				1
> > -#define  ATR_IMPL_ENABLE			1
> > -#define ATR0_AXI4_SLV0_SRC_ADDR			0x804u
> > -#define ATR0_AXI4_SLV0_TRSL_ADDR_LSB		0x808u
> > -#define ATR0_AXI4_SLV0_TRSL_ADDR_UDW		0x80cu
> > -#define ATR0_AXI4_SLV0_TRSL_PARAM		0x810u
> > -#define  PCIE_TX_RX_INTERFACE			0x00000000u
> > -#define  PCIE_CONFIG_INTERFACE			0x00000001u
> > -
> > -#define ATR_ENTRY_SIZE				32
> > -
> >  /* PCIe Controller Phy Regs */
> >  #define SEC_ERROR_EVENT_CNT			0x20
> >  #define DED_ERROR_EVENT_CNT			0x24
> > @@ -179,20 +102,21 @@
> >  #define EVENT_LOCAL_DMA_END_ENGINE_1		12
> >  #define EVENT_LOCAL_DMA_ERROR_ENGINE_0		13
> >  #define EVENT_LOCAL_DMA_ERROR_ENGINE_1		14
> > -#define EVENT_LOCAL_A_ATR_EVT_POST_ERR		15
> > -#define EVENT_LOCAL_A_ATR_EVT_FETCH_ERR		16
> > -#define EVENT_LOCAL_A_ATR_EVT_DISCARD_ERR	17
> > -#define EVENT_LOCAL_A_ATR_EVT_DOORBELL		18
> > -#define EVENT_LOCAL_P_ATR_EVT_POST_ERR		19
> > -#define EVENT_LOCAL_P_ATR_EVT_FETCH_ERR		20
> > -#define EVENT_LOCAL_P_ATR_EVT_DISCARD_ERR	21
> > -#define EVENT_LOCAL_P_ATR_EVT_DOORBELL		22
> > -#define EVENT_LOCAL_PM_MSI_INT_INTX		23
> > -#define EVENT_LOCAL_PM_MSI_INT_MSI		24
> > -#define EVENT_LOCAL_PM_MSI_INT_AER_EVT		25
> > -#define EVENT_LOCAL_PM_MSI_INT_EVENTS		26
> > -#define EVENT_LOCAL_PM_MSI_INT_SYS_ERR		27
> > -#define NUM_EVENTS				28
> > +#define NUM_MC_EVENTS				15
> > +#define EVENT_LOCAL_A_ATR_EVT_POST_ERR		(NUM_MC_EVENTS
> + PLDA_AXI_POST_ERR)
> > +#define EVENT_LOCAL_A_ATR_EVT_FETCH_ERR		(NUM_MC_EVENTS
> + PLDA_AXI_FETCH_ERR)
> > +#define EVENT_LOCAL_A_ATR_EVT_DISCARD_ERR	(NUM_MC_EVENTS +
> PLDA_AXI_DISCARD_ERR)
> > +#define EVENT_LOCAL_A_ATR_EVT_DOORBELL		(NUM_MC_EVENTS
> + PLDA_AXI_DOORBELL)
> > +#define EVENT_LOCAL_P_ATR_EVT_POST_ERR		(NUM_MC_EVENTS
> + PLDA_PCIE_POST_ERR)
> > +#define EVENT_LOCAL_P_ATR_EVT_FETCH_ERR		(NUM_MC_EVENTS
> + PLDA_PCIE_FETCH_ERR)
> > +#define EVENT_LOCAL_P_ATR_EVT_DISCARD_ERR	(NUM_MC_EVENTS +
> PLDA_PCIE_DISCARD_ERR)
> > +#define EVENT_LOCAL_P_ATR_EVT_DOORBELL		(NUM_MC_EVENTS
> + PLDA_PCIE_DOORBELL)
> > +#define EVENT_LOCAL_PM_MSI_INT_INTX		(NUM_MC_EVENTS +
> PLDA_INTX)
> > +#define EVENT_LOCAL_PM_MSI_INT_MSI		(NUM_MC_EVENTS +
> PLDA_MSI)
> > +#define EVENT_LOCAL_PM_MSI_INT_AER_EVT		(NUM_MC_EVENTS
> + PLDA_AER_EVENT)
> > +#define EVENT_LOCAL_PM_MSI_INT_EVENTS		(NUM_MC_EVENTS +
> PLDA_MISC_EVENTS)
> > +#define EVENT_LOCAL_PM_MSI_INT_SYS_ERR		(NUM_MC_EVENTS
> + PLDA_SYS_ERR)
> > +#define NUM_EVENTS				(NUM_MC_EVENTS +
> PLDA_INT_EVENT_NUM)
> >
> >  #define PCIE_EVENT_CAUSE(x, s)	\
> >  	[EVENT_PCIE_ ## x] = { __stringify(x), s } diff --git
> > a/drivers/pci/controller/plda/pcie-plda.h
> > b/drivers/pci/controller/plda/pcie-plda.h
> > new file mode 100644
> > index 000000000000..65e0f3b72184
> > --- /dev/null
> > +++ b/drivers/pci/controller/plda/pcie-plda.h
> > @@ -0,0 +1,108 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * PLDA PCIe host controller driver
> > + */
> > +
> > +#ifndef _PCIE_PLDA_H
> > +#define _PCIE_PLDA_H
> > +
> > +/* PCIe Bridge Phy Regs */
> > +#define PCIE_PCI_IRQ_DW0			0xa8
> > +#define  MSIX_CAP_MASK				BIT(31)
> > +#define  NUM_MSI_MSGS_MASK			GENMASK(6, 4)
> > +#define  NUM_MSI_MSGS_SHIFT			4
> > +
> > +#define IMASK_LOCAL				0x180
> > +#define  DMA_END_ENGINE_0_MASK			0x00000000u
> > +#define  DMA_END_ENGINE_0_SHIFT			0
> > +#define  DMA_END_ENGINE_1_MASK			0x00000000u
> > +#define  DMA_END_ENGINE_1_SHIFT			1
> > +#define  DMA_ERROR_ENGINE_0_MASK		0x00000100u
> > +#define  DMA_ERROR_ENGINE_0_SHIFT		8
> > +#define  DMA_ERROR_ENGINE_1_MASK		0x00000200u
> > +#define  DMA_ERROR_ENGINE_1_SHIFT		9
> > +#define  A_ATR_EVT_POST_ERR_MASK		0x00010000u
> > +#define  A_ATR_EVT_POST_ERR_SHIFT		16
> > +#define  A_ATR_EVT_FETCH_ERR_MASK		0x00020000u
> > +#define  A_ATR_EVT_FETCH_ERR_SHIFT		17
> > +#define  A_ATR_EVT_DISCARD_ERR_MASK		0x00040000u
> > +#define  A_ATR_EVT_DISCARD_ERR_SHIFT		18
> > +#define  A_ATR_EVT_DOORBELL_MASK		0x00000000u
> > +#define  A_ATR_EVT_DOORBELL_SHIFT		19
> > +#define  P_ATR_EVT_POST_ERR_MASK		0x00100000u
> > +#define  P_ATR_EVT_POST_ERR_SHIFT		20
> > +#define  P_ATR_EVT_FETCH_ERR_MASK		0x00200000u
> > +#define  P_ATR_EVT_FETCH_ERR_SHIFT		21
> > +#define  P_ATR_EVT_DISCARD_ERR_MASK		0x00400000u
> > +#define  P_ATR_EVT_DISCARD_ERR_SHIFT		22
> > +#define  P_ATR_EVT_DOORBELL_MASK		0x00000000u
> > +#define  P_ATR_EVT_DOORBELL_SHIFT		23
> > +#define  PM_MSI_INT_INTA_MASK			0x01000000u
> > +#define  PM_MSI_INT_INTA_SHIFT			24
> > +#define  PM_MSI_INT_INTB_MASK			0x02000000u
> > +#define  PM_MSI_INT_INTB_SHIFT			25
> > +#define  PM_MSI_INT_INTC_MASK			0x04000000u
> > +#define  PM_MSI_INT_INTC_SHIFT			26
> > +#define  PM_MSI_INT_INTD_MASK			0x08000000u
> > +#define  PM_MSI_INT_INTD_SHIFT			27
> > +#define  PM_MSI_INT_INTX_MASK			0x0f000000u
> > +#define  PM_MSI_INT_INTX_SHIFT			24
> > +#define  PM_MSI_INT_MSI_MASK			0x10000000u
> > +#define  PM_MSI_INT_MSI_SHIFT			28
> > +#define  PM_MSI_INT_AER_EVT_MASK		0x20000000u
> > +#define  PM_MSI_INT_AER_EVT_SHIFT		29
> > +#define  PM_MSI_INT_EVENTS_MASK			0x40000000u
> > +#define  PM_MSI_INT_EVENTS_SHIFT		30
> > +#define  PM_MSI_INT_SYS_ERR_MASK		0x80000000u
> > +#define  PM_MSI_INT_SYS_ERR_SHIFT		31
> > +#define  NUM_LOCAL_EVENTS			15
> > +#define ISTATUS_LOCAL				0x184
> > +#define IMASK_HOST				0x188
> > +#define ISTATUS_HOST				0x18c
> > +#define IMSI_ADDR				0x190
> > +#define ISTATUS_MSI				0x194
> > +
> > +/* PCIe Master table init defines */
> > +#define ATR0_PCIE_WIN0_SRCADDR_PARAM		0x600u
> > +#define  ATR0_PCIE_ATR_SIZE			0x25
> > +#define  ATR0_PCIE_ATR_SIZE_SHIFT		1
> > +#define ATR0_PCIE_WIN0_SRC_ADDR			0x604u
> > +#define ATR0_PCIE_WIN0_TRSL_ADDR_LSB		0x608u
> > +#define ATR0_PCIE_WIN0_TRSL_ADDR_UDW		0x60cu
> > +#define ATR0_PCIE_WIN0_TRSL_PARAM		0x610u
> > +
> > +/* PCIe AXI slave table init defines */
> > +#define ATR0_AXI4_SLV0_SRCADDR_PARAM		0x800u
> > +#define  ATR_SIZE_SHIFT				1
> > +#define  ATR_IMPL_ENABLE			1
> > +#define ATR0_AXI4_SLV0_SRC_ADDR			0x804u
> > +#define ATR0_AXI4_SLV0_TRSL_ADDR_LSB		0x808u
> > +#define ATR0_AXI4_SLV0_TRSL_ADDR_UDW		0x80cu
> > +#define ATR0_AXI4_SLV0_TRSL_PARAM		0x810u
> > +#define  PCIE_TX_RX_INTERFACE			0x00000000u
> > +#define  PCIE_CONFIG_INTERFACE			0x00000001u
> > +
> > +#define ATR_ENTRY_SIZE				32
> > +
> > +enum plda_int_event {
> > +	PLDA_AXI_POST_ERR,
> > +	PLDA_AXI_FETCH_ERR,
> > +	PLDA_AXI_DISCARD_ERR,
> > +	PLDA_AXI_DOORBELL,
> > +	PLDA_PCIE_POST_ERR,
> > +	PLDA_PCIE_FETCH_ERR,
> > +	PLDA_PCIE_DISCARD_ERR,
> > +	PLDA_PCIE_DOORBELL,
> > +	PLDA_INTX,
> > +	PLDA_MSI,
> > +	PLDA_AER_EVENT,
> > +	PLDA_MISC_EVENTS,
> > +	PLDA_SYS_ERR,
> > +	PLDA_INT_EVENT_NUM
> > +};
> > +
> > +#define PLDA_NUM_DMA_EVENTS			16
> > +
> > +#define PLDA_MAX_EVENT_NUM			(PLDA_NUM_DMA_EVENTS +
> PLDA_INT_EVENT_NUM)
> > +
> > +#endif
> > --
> > 2.17.1
> >

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2024-02-29 11:07 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-27 10:34 [PATCH v15,RESEND 00/23] Refactoring Microchip PCIe driver and add StarFive PCIe Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 01/23] dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 02/23] PCI: microchip: Move pcie-microchip-host.c to plda directory Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 03/23] PCI: microchip: Move PLDA IP register macros to pcie-plda.h Minda Chen
2024-02-29 10:11   ` Lorenzo Pieralisi
2024-02-29 10:52     ` Minda Chen [this message]
2024-02-27 10:35 ` [PATCH v15,RESEND 04/23] PCI: microchip: Add bridge_addr field to struct mc_pcie Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 05/23] PCI: microchip: Rename two PCIe data structures Minda Chen
2024-02-29 10:01   ` Lorenzo Pieralisi
2024-03-01 11:00     ` Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 06/23] PCI: microchip: Move PCIe host data structures to plda-pcie.h Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 07/23] PCI: microchip: Rename two setup functions Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 08/23] PCI: microchip: Change the argument of plda_pcie_setup_iomems() Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 09/23] PCI: microchip: Move setup functions to pcie-plda-host.c Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 10/23] PCI: microchip: Rename interrupt related functions Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 11/23] PCI: microchip: Add num_events field to struct plda_pcie_rp Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 12/23] PCI: microchip: Add request_event_irq() callback function Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 13/23] PCI: microchip: Add INTx and MSI event num to struct plda_event Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 14/23] PCI: microchip: Add get_events() callback and add PLDA get_event() Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 15/23] PCI: microchip: Add event irqchip field to host port and add PLDA irqchip Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 16/23] PCI: microchip: Move IRQ functions to pcie-plda-host.c Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 17/23] PCI: plda: Add event bitmap field to struct plda_pcie_rp Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 18/23] PCI: plda: Add host init/deinit and map bus functions Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 19/23] dt-bindings: PCI: Add StarFive JH7110 PCIe controller Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 20/23] PCI: Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS waiting time value Minda Chen
2024-02-27 10:35 ` [PATCH v15,RESEND 21/23] PCI: starfive: Add JH7110 PCIe controller Minda Chen
2024-02-29 14:24   ` Lorenzo Pieralisi
2024-03-04 12:52     ` Kevin Xie
2024-02-27 10:35 ` [PATCH v15,RESEND 22/23] PCI: starfive: Offload the NVMe timeout workaround to host drivers Minda Chen
2024-02-29 15:08   ` Lorenzo Pieralisi
2024-03-04 18:08     ` Palmer Dabbelt
2024-03-05 15:56       ` Lorenzo Pieralisi
2024-03-14  2:18         ` Kevin Xie
2024-03-14  2:51           ` Keith Busch
2024-03-14  3:39             ` Keith Busch
2024-03-20  7:12             ` Bo Gan
2024-03-20  8:42               ` Kevin Xie
2024-02-27 10:35 ` [PATCH v15,RESEND 23/23] riscv: dts: starfive: add PCIe dts configuration for JH7110 Minda Chen
2024-02-27 18:06 ` [PATCH v15,RESEND 00/23] Refactoring Microchip PCIe driver and add StarFive PCIe Aurelien Jarno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=SHXPR01MB08639980F82FD130F9CD4D73E65FA@SHXPR01MB0863.CHNPR01.prod.partner.outlook.cn \
    --to=minda.chen@starfivetech.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=bhelgaas@google.com \
    --cc=conor@kernel.org \
    --cc=daire.mcnamara@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=emil.renner.berthing@canonical.com \
    --cc=kevin.xie@starfivetech.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kw@linux.com \
    --cc=leyfoon.tan@starfivetech.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=lpieralisi@kernel.org \
    --cc=mason.huo@starfivetech.com \
    --cc=p.zabel@pengutronix.de \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).