* [PATCH v6 00/11] Turris Omnia MCU driver
@ 2024-04-18 12:11 Marek Behún
2024-04-18 12:11 ` [PATCH v6 02/11] platform: cznic: Add preliminary support for Turris Omnia MCU Marek Behún
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Marek Behún @ 2024-04-18 12:11 UTC (permalink / raw)
To: Gregory CLEMENT, Arnd Bergmann, soc, Alessandro Zummo,
Alexandre Belloni, Andy Shevchenko, Bartosz Golaszewski,
Christophe JAILLET, Dan Carpenter, devicetree,
Greg Kroah-Hartman, Guenter Roeck, Hans de Goede, Herbert Xu,
Krzysztof Kozlowski, Linus Walleij, linux-crypto, linux-gpio,
linux-rtc, linux-watchdog, Matti Vaittinen, Olivia Mackall,
Rob Herring, Wim Van Sebroeck
Cc: arm, Marek Behún, Andrew Lunn, Conor Dooley,
Krzysztof Kozlowski, Rob Herring, Sebastian Hesselbarth,
Uwe Kleine-König
Hello Andy, Dan, Linus, Arnd, Gregory, and others,
I am sending v6 of the series adding Turris Omnia MCU driver.
This series depends on the immutable branch between LEDs and locking,
introducing devm_mutex_init(), see the PR
https://lore.kernel.org/linux-leds/20240412084616.GR2399047@google.com/
See the cover letters for v1, v2, v3, v4 and v5:
https://patchwork.kernel.org/project/linux-soc/cover/20230823161012.6986-1-kabel@kernel.org/
https://patchwork.kernel.org/project/linux-soc/cover/20230919103815.16818-1-kabel@kernel.org/
https://patchwork.kernel.org/project/linux-soc/cover/20231023143130.11602-1-kabel@kernel.org/
https://patchwork.kernel.org/project/linux-soc/cover/20231026161803.16750-1-kabel@kernel.org/
https://patchwork.kernel.org/project/linux-soc/cover/20240323164359.21642-1-kabel@kernel.org/
Changes since v5:
- use dev_get_drvdata(dev) instead of
i2c_get_clientdata(to_i2c_client(dev))
- uses devm_mutex_init() from the above mentioned branch
- addressed Andy's suggestions for patch 2 (excluding the one suggesting
100 column lines, I still prefer 80 columns)
- addressed Dan's suggestion for devm_irq_create_mapping() (return
-ENXIO if mapping could not be created, not 0 as irq_create_mapping()
does)
- I threw away the changes for other drivers that came with the new
devm_ helpers, notably conversion to devm_debugfs_create_dir(), as
there were some problems
Marek Behún (11):
dt-bindings: arm: add cznic,turris-omnia-mcu binding
platform: cznic: Add preliminary support for Turris Omnia MCU
platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs
platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup
platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
devm-helpers: Add resource managed version of irq_create_mapping()
platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG
devm-helpers: Add resource managed version of debugfs directory create
function
platform: cznic: turris-omnia-mcu: Add support for digital message
signing via debugfs
ARM: dts: turris-omnia: Add MCU system-controller node
ARM: dts: turris-omnia: Add GPIO key node for front button
.../ABI/testing/debugfs-turris-omnia-mcu | 13 +
.../sysfs-bus-i2c-devices-turris-omnia-mcu | 126 ++
.../bindings/arm/cznic,turris-omnia-mcu.yaml | 86 ++
MAINTAINERS | 5 +
.../dts/marvell/armada-385-turris-omnia.dts | 35 +-
drivers/platform/Kconfig | 2 +
drivers/platform/Makefile | 1 +
drivers/platform/cznic/Kconfig | 51 +
drivers/platform/cznic/Makefile | 9 +
.../platform/cznic/turris-omnia-mcu-base.c | 439 +++++++
.../platform/cznic/turris-omnia-mcu-debugfs.c | 209 ++++
.../platform/cznic/turris-omnia-mcu-gpio.c | 1047 +++++++++++++++++
.../cznic/turris-omnia-mcu-sys-off-wakeup.c | 258 ++++
.../platform/cznic/turris-omnia-mcu-trng.c | 89 ++
.../cznic/turris-omnia-mcu-watchdog.c | 123 ++
drivers/platform/cznic/turris-omnia-mcu.h | 188 +++
include/linux/devm-helpers.h | 94 ++
include/linux/turris-omnia-mcu-interface.h | 249 ++++
18 files changed, 3023 insertions(+), 1 deletion(-)
create mode 100644 Documentation/ABI/testing/debugfs-turris-omnia-mcu
create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
create mode 100644 Documentation/devicetree/bindings/arm/cznic,turris-omnia-mcu.yaml
create mode 100644 drivers/platform/cznic/Kconfig
create mode 100644 drivers/platform/cznic/Makefile
create mode 100644 drivers/platform/cznic/turris-omnia-mcu-base.c
create mode 100644 drivers/platform/cznic/turris-omnia-mcu-debugfs.c
create mode 100644 drivers/platform/cznic/turris-omnia-mcu-gpio.c
create mode 100644 drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c
create mode 100644 drivers/platform/cznic/turris-omnia-mcu-trng.c
create mode 100644 drivers/platform/cznic/turris-omnia-mcu-watchdog.c
create mode 100644 drivers/platform/cznic/turris-omnia-mcu.h
create mode 100644 include/linux/turris-omnia-mcu-interface.h
--
2.43.2
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v6 02/11] platform: cznic: Add preliminary support for Turris Omnia MCU
2024-04-18 12:11 [PATCH v6 00/11] Turris Omnia MCU driver Marek Behún
@ 2024-04-18 12:11 ` Marek Behún
2024-04-18 12:11 ` [PATCH v6 04/11] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup Marek Behún
2024-04-23 16:05 ` [PATCH v6 00/11] Turris Omnia MCU driver Andy Shevchenko
2 siblings, 0 replies; 4+ messages in thread
From: Marek Behún @ 2024-04-18 12:11 UTC (permalink / raw)
To: Gregory CLEMENT, Arnd Bergmann, soc, Linus Walleij,
Bartosz Golaszewski, Andy Shevchenko, linux-gpio,
Alessandro Zummo, Alexandre Belloni, linux-rtc, Wim Van Sebroeck,
Guenter Roeck, linux-watchdog
Cc: arm, Marek Behún
Add the basic skeleton for a new platform driver for the microcontroller
found on the Turris Omnia board.
Signed-off-by: Marek Behún <kabel@kernel.org>
---
.../sysfs-bus-i2c-devices-turris-omnia-mcu | 81 ++++
MAINTAINERS | 3 +
drivers/platform/Kconfig | 2 +
drivers/platform/Makefile | 1 +
drivers/platform/cznic/Kconfig | 26 ++
drivers/platform/cznic/Makefile | 4 +
.../platform/cznic/turris-omnia-mcu-base.c | 376 ++++++++++++++++++
drivers/platform/cznic/turris-omnia-mcu.h | 50 +++
include/linux/turris-omnia-mcu-interface.h | 249 ++++++++++++
9 files changed, 792 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
create mode 100644 drivers/platform/cznic/Kconfig
create mode 100644 drivers/platform/cznic/Makefile
create mode 100644 drivers/platform/cznic/turris-omnia-mcu-base.c
create mode 100644 drivers/platform/cznic/turris-omnia-mcu.h
create mode 100644 include/linux/turris-omnia-mcu-interface.h
diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
new file mode 100644
index 000000000000..ff5e7cb00206
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
@@ -0,0 +1,81 @@
+What: /sys/bus/i2c/devices/<mcu_device>/board_revision
+Date: July 2024
+KernelVersion: 6.10
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RO) Contains board revision number.
+
+ Only available if board information is burned in the MCU (older
+ revisions have board information burned in the ATSHA204-A chip).
+
+ Format: %u.
+
+What: /sys/bus/i2c/devices/<mcu_device>/first_mac_address
+Date: July 2024
+KernelVersion: 6.10
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RO) Contains device first MAC address. Each Turris Omnia is
+ allocated 3 MAC addresses. The two additional addresses are
+ computed from the first one by incrementing it.
+
+ Only available if board information is burned in the MCU (older
+ revisions have board information burned in the ATSHA204-A chip).
+
+ Format: %pM.
+
+What: /sys/bus/i2c/devices/<mcu_device>/fw_features
+Date: July 2024
+KernelVersion: 6.10
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RO) Newer versions of the microcontroller firmware report the
+ features they support. These can be read from this file. If the
+ MCU firmware is too old, this file reads 0x0.
+
+ Format: 0x%x.
+
+What: /sys/bus/i2c/devices/<mcu_device>/fw_version_hash_application
+Date: July 2024
+KernelVersion: 6.10
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RO) Contains the version hash (commit hash) of the application
+ part of the microcontroller firmware.
+
+ Format: %s.
+
+What: /sys/bus/i2c/devices/<mcu_device>/fw_version_hash_bootloader
+Date: July 2024
+KernelVersion: 6.10
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RO) Contains the version hash (commit hash) of the bootloader
+ part of the microcontroller firmware.
+
+ Format: %s.
+
+What: /sys/bus/i2c/devices/<mcu_device>/mcu_type
+Date: July 2024
+KernelVersion: 6.10
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RO) Contains the microcontroller type (STM32, GD32, MKL).
+
+ Format: %s.
+
+What: /sys/bus/i2c/devices/<mcu_device>/reset_selector
+Date: July 2024
+KernelVersion: 6.10
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RO) Contains the selected factory reset level, determined by
+ how long the rear reset button was held by the user during board
+ reset.
+
+ Format: %i.
+
+What: /sys/bus/i2c/devices/<mcu_device>/serial_number
+Date: July 2024
+KernelVersion: 6.10
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RO) Contains the 64 bit long board serial number in hexadecimal
+ format.
+
+ Only available if board information is burned in the MCU (older
+ revisions have board information burned in the ATSHA204-A chip).
+
+ Format: %016X.
diff --git a/MAINTAINERS b/MAINTAINERS
index 23637ff1e0bc..b37f7ca81785 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2139,6 +2139,7 @@ M: Marek Behún <kabel@kernel.org>
S: Maintained
W: https://www.turris.cz/
F: Documentation/ABI/testing/debugfs-moxtet
+F: Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
F: Documentation/ABI/testing/sysfs-bus-moxtet-devices
F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
F: Documentation/devicetree/bindings/arm/cznic,turris-omnia-mcu.yaml
@@ -2152,10 +2153,12 @@ F: drivers/firmware/turris-mox-rwtm.c
F: drivers/gpio/gpio-moxtet.c
F: drivers/leds/leds-turris-omnia.c
F: drivers/mailbox/armada-37xx-rwtm-mailbox.c
+F: drivers/platform/cznic/
F: drivers/watchdog/armada_37xx_wdt.c
F: include/dt-bindings/bus/moxtet.h
F: include/linux/armada-37xx-rwtm-mailbox.h
F: include/linux/moxtet.h
+F: include/linux/turris-omnia-mcu-interface.h
ARM/FARADAY FA526 PORT
M: Hans Ulli Kroll <ulli.kroll@googlemail.com>
diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index 868b20361769..fef907a94001 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -7,6 +7,8 @@ source "drivers/platform/goldfish/Kconfig"
source "drivers/platform/chrome/Kconfig"
+source "drivers/platform/cznic/Kconfig"
+
source "drivers/platform/mellanox/Kconfig"
source "drivers/platform/olpc/Kconfig"
diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
index 41640172975a..8bf189264374 100644
--- a/drivers/platform/Makefile
+++ b/drivers/platform/Makefile
@@ -10,4 +10,5 @@ obj-$(CONFIG_MIPS) += mips/
obj-$(CONFIG_OLPC_EC) += olpc/
obj-$(CONFIG_GOLDFISH) += goldfish/
obj-$(CONFIG_CHROME_PLATFORMS) += chrome/
+obj-$(CONFIG_CZNIC_PLATFORMS) += cznic/
obj-$(CONFIG_SURFACE_PLATFORMS) += surface/
diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig
new file mode 100644
index 000000000000..f8560ff9c1af
--- /dev/null
+++ b/drivers/platform/cznic/Kconfig
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.rst.
+#
+
+menuconfig CZNIC_PLATFORMS
+ bool "Platform support for CZ.NIC's Turris hardware"
+ depends on MACH_ARMADA_38X || COMPILE_TEST
+ help
+ Say Y here to be able to choose driver support for CZ.NIC's Turris
+ devices. This option alone does not add any kernel code.
+
+if CZNIC_PLATFORMS
+
+config TURRIS_OMNIA_MCU
+ tristate "Turris Omnia MCU driver"
+ depends on MACH_ARMADA_38X || COMPILE_TEST
+ depends on I2C
+ help
+ Say Y here to add support for the features implemented by the
+ microcontroller on the CZ.NIC's Turris Omnia SOHO router.
+ To compile this driver as a module, choose M here; the module will be
+ called turris-omnia-mcu.
+
+endif # CZNIC_PLATFORMS
diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile
new file mode 100644
index 000000000000..31adca73bb94
--- /dev/null
+++ b/drivers/platform/cznic/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o
+turris-omnia-mcu-y := turris-omnia-mcu-base.o
diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c
new file mode 100644
index 000000000000..8893c990853a
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CZ.NIC's Turris Omnia MCU driver
+ *
+ * 2024 by Marek Behún <kabel@kernel.org>
+ */
+
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/hex.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/turris-omnia-mcu-interface.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+
+#include "turris-omnia-mcu.h"
+
+#define OMNIA_FW_VERSION_LEN 20
+#define OMNIA_FW_VERSION_HEX_LEN (2 * OMNIA_FW_VERSION_LEN + 1)
+#define OMNIA_BOARD_INFO_LEN 16
+
+int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply,
+ unsigned int len)
+{
+ struct i2c_msg msgs[2];
+ int ret;
+
+ msgs[0].addr = client->addr;
+ msgs[0].flags = 0;
+ msgs[0].len = 1;
+ msgs[0].buf = &cmd;
+ msgs[1].addr = client->addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = len;
+ msgs[1].buf = reply;
+
+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ return ret;
+ if (ret != ARRAY_SIZE(msgs))
+ return -EIO;
+
+ return 0;
+}
+
+static int omnia_get_version_hash(struct omnia_mcu *mcu, bool bootloader,
+ u8 version[static OMNIA_FW_VERSION_HEX_LEN])
+{
+ u8 reply[OMNIA_FW_VERSION_LEN];
+ int err;
+
+ err = omnia_cmd_read(mcu->client,
+ bootloader ? CMD_GET_FW_VERSION_BOOT
+ : CMD_GET_FW_VERSION_APP,
+ reply, sizeof(reply));
+ if (err)
+ return err;
+
+ version[OMNIA_FW_VERSION_HEX_LEN - 1] = '\0';
+ bin2hex(version, reply, OMNIA_FW_VERSION_LEN);
+
+ return 0;
+}
+
+static ssize_t fw_version_hash_show(struct device *dev, char *buf,
+ bool bootloader)
+{
+ struct omnia_mcu *mcu = dev_get_drvdata(dev);
+ u8 version[OMNIA_FW_VERSION_HEX_LEN];
+ int err;
+
+ err = omnia_get_version_hash(mcu, bootloader, version);
+ if (err)
+ return err;
+
+ return sysfs_emit(buf, "%s\n", version);
+}
+
+static ssize_t fw_version_hash_application_show(struct device *dev,
+ struct device_attribute *a,
+ char *buf)
+{
+ return fw_version_hash_show(dev, buf, false);
+}
+static DEVICE_ATTR_RO(fw_version_hash_application);
+
+static ssize_t fw_version_hash_bootloader_show(struct device *dev,
+ struct device_attribute *a,
+ char *buf)
+{
+ return fw_version_hash_show(dev, buf, true);
+}
+static DEVICE_ATTR_RO(fw_version_hash_bootloader);
+
+static ssize_t fw_features_show(struct device *dev, struct device_attribute *a,
+ char *buf)
+{
+ struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "0x%x\n", mcu->features);
+}
+static DEVICE_ATTR_RO(fw_features);
+
+static ssize_t mcu_type_show(struct device *dev, struct device_attribute *a,
+ char *buf)
+{
+ struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%s\n", mcu->type);
+}
+static DEVICE_ATTR_RO(mcu_type);
+
+static ssize_t reset_selector_show(struct device *dev,
+ struct device_attribute *a, char *buf)
+{
+ int ret;
+
+ ret = omnia_cmd_read_u8(to_i2c_client(dev), CMD_GET_RESET);
+ if (ret < 0)
+ return ret;
+
+ return sysfs_emit(buf, "%d\n", ret);
+}
+static DEVICE_ATTR_RO(reset_selector);
+
+static ssize_t serial_number_show(struct device *dev,
+ struct device_attribute *a, char *buf)
+{
+ struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%016llX\n", mcu->board_serial_number);
+}
+static DEVICE_ATTR_RO(serial_number);
+
+static ssize_t first_mac_address_show(struct device *dev,
+ struct device_attribute *a, char *buf)
+{
+ struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%pM\n", mcu->board_first_mac);
+}
+static DEVICE_ATTR_RO(first_mac_address);
+
+static ssize_t board_revision_show(struct device *dev,
+ struct device_attribute *a, char *buf)
+{
+ struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%u\n", mcu->board_revision);
+}
+static DEVICE_ATTR_RO(board_revision);
+
+static struct attribute *omnia_mcu_base_attrs[] = {
+ &dev_attr_fw_version_hash_application.attr,
+ &dev_attr_fw_version_hash_bootloader.attr,
+ &dev_attr_fw_features.attr,
+ &dev_attr_mcu_type.attr,
+ &dev_attr_reset_selector.attr,
+ &dev_attr_serial_number.attr,
+ &dev_attr_first_mac_address.attr,
+ &dev_attr_board_revision.attr,
+ NULL
+};
+
+static umode_t omnia_mcu_base_attrs_visible(struct kobject *kobj,
+ struct attribute *a, int n)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct omnia_mcu *mcu = dev_get_drvdata(dev);
+ umode_t mode = a->mode;
+
+ if ((a == &dev_attr_serial_number.attr ||
+ a == &dev_attr_first_mac_address.attr ||
+ a == &dev_attr_board_revision.attr) &&
+ !(mcu->features & FEAT_BOARD_INFO))
+ mode = 0;
+
+ return mode;
+}
+
+static const struct attribute_group omnia_mcu_base_group = {
+ .attrs = omnia_mcu_base_attrs,
+ .is_visible = omnia_mcu_base_attrs_visible,
+};
+
+static const struct attribute_group *omnia_mcu_groups[] = {
+ &omnia_mcu_base_group,
+ NULL
+};
+
+static void omnia_mcu_print_version_hash(struct omnia_mcu *mcu, bool bootloader)
+{
+ const char *type = bootloader ? "bootloader" : "application";
+ struct device *dev = &mcu->client->dev;
+ u8 version[OMNIA_FW_VERSION_HEX_LEN];
+ int err;
+
+ err = omnia_get_version_hash(mcu, bootloader, version);
+ if (err) {
+ dev_err(dev, "Cannot read MCU %s firmware version: %d\n", type,
+ err);
+ return;
+ }
+
+ dev_info(dev, "MCU %s firmware version hash: %s\n", type, version);
+}
+
+static const char *omnia_status_to_mcu_type(uint16_t status)
+{
+ switch (status & STS_MCU_TYPE_MASK) {
+ case STS_MCU_TYPE_STM32:
+ return "STM32";
+ case STS_MCU_TYPE_GD32:
+ return "GD32";
+ case STS_MCU_TYPE_MKL:
+ return "MKL";
+ default:
+ return "unknown";
+ }
+}
+
+static void omnia_info_missing_feature(struct device *dev, const char *feature)
+{
+ dev_info(dev,
+ "Your board's MCU firmware does not support the %s feature.\n",
+ feature);
+}
+
+static int omnia_mcu_read_features(struct omnia_mcu *mcu)
+{
+ static const struct {
+ uint16_t mask;
+ const char *name;
+ } features[] = {
+ { FEAT_EXT_CMDS, "extended control and status" },
+ { FEAT_WDT_PING, "watchdog pinging" },
+ { FEAT_LED_STATE_EXT_MASK, "peripheral LED pins reading" },
+ { FEAT_NEW_INT_API, "new interrupt API" },
+ { FEAT_POWEROFF_WAKEUP, "poweroff and wakeup" },
+ { FEAT_TRNG, "true random number generator" },
+ };
+ struct device *dev = &mcu->client->dev;
+ bool suggest_fw_upgrade = false;
+ int status;
+
+ /* status word holds MCU type, which we need below */
+ status = omnia_cmd_read_u16(mcu->client, CMD_GET_STATUS_WORD);
+ if (status < 0)
+ return status;
+
+ /* check whether MCU firmware supports the CMD_GET_FEAUTRES command */
+ if (status & STS_FEATURES_SUPPORTED) {
+ __le32 reply;
+ int ret;
+
+ /* try read 32-bit features */
+ ret = omnia_cmd_read(mcu->client, CMD_GET_FEATURES, &reply,
+ sizeof(reply));
+ if (ret) {
+ /* try read 16-bit features */
+ ret = omnia_cmd_read_u16(mcu->client, CMD_GET_FEATURES);
+ if (ret < 0)
+ return ret;
+
+ mcu->features = ret;
+ } else {
+ mcu->features = le32_to_cpu(reply);
+
+ if (mcu->features & FEAT_FROM_BIT_16_INVALID)
+ mcu->features &= GENMASK(15, 0);
+ }
+ } else {
+ omnia_info_missing_feature(dev, "feature reading");
+ suggest_fw_upgrade = true;
+ }
+
+ mcu->type = omnia_status_to_mcu_type(status);
+ dev_info(dev, "MCU type %s%s\n", mcu->type,
+ (mcu->features & FEAT_PERIPH_MCU) ?
+ ", with peripheral resets wired" : "");
+
+ omnia_mcu_print_version_hash(mcu, true);
+
+ if (mcu->features & FEAT_BOOTLOADER)
+ dev_warn(dev,
+ "MCU is running bootloader firmware. Was firmware upgrade interrupted?\n");
+ else
+ omnia_mcu_print_version_hash(mcu, false);
+
+ for (unsigned int i = 0; i < ARRAY_SIZE(features); i++) {
+ if (mcu->features & features[i].mask)
+ continue;
+
+ omnia_info_missing_feature(dev, features[i].name);
+ suggest_fw_upgrade = true;
+ }
+
+ if (suggest_fw_upgrade)
+ dev_info(dev,
+ "Consider upgrading MCU firmware with the omnia-mcutool utility.\n");
+
+ return 0;
+}
+
+static int omnia_mcu_read_board_info(struct omnia_mcu *mcu)
+{
+ u8 reply[1 + OMNIA_BOARD_INFO_LEN];
+ int err;
+
+ err = omnia_cmd_read(mcu->client, CMD_BOARD_INFO_GET, reply,
+ sizeof(reply));
+ if (err)
+ return err;
+
+ if (reply[0] != OMNIA_BOARD_INFO_LEN)
+ return -EIO;
+
+ mcu->board_serial_number = get_unaligned_le64(&reply[1]);
+ memcpy(mcu->board_first_mac, &reply[9], ETH_ALEN);
+ mcu->board_revision = reply[15];
+
+ return 0;
+}
+
+static int omnia_mcu_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct omnia_mcu *mcu;
+ int err;
+
+ if (!client->irq)
+ return dev_err_probe(dev, -EINVAL, "IRQ resource not found\n");
+
+ mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL);
+ if (!mcu)
+ return -ENOMEM;
+
+ mcu->client = client;
+ i2c_set_clientdata(client, mcu);
+
+ err = omnia_mcu_read_features(mcu);
+ if (err)
+ return dev_err_probe(dev, err,
+ "Cannot determine MCU supported features\n");
+
+ if (mcu->features & FEAT_BOARD_INFO) {
+ err = omnia_mcu_read_board_info(mcu);
+ if (err)
+ return dev_err_probe(dev, err,
+ "Cannot read board info\n");
+ }
+
+ return 0;
+}
+
+static const struct of_device_id of_omnia_mcu_match[] = {
+ { .compatible = "cznic,turris-omnia-mcu" },
+ {}
+};
+
+static struct i2c_driver omnia_mcu_driver = {
+ .probe = omnia_mcu_probe,
+ .driver = {
+ .name = "turris-omnia-mcu",
+ .of_match_table = of_omnia_mcu_match,
+ .dev_groups = omnia_mcu_groups,
+ },
+};
+module_i2c_driver(omnia_mcu_driver);
+
+MODULE_AUTHOR("Marek Behun <kabel@kernel.org>");
+MODULE_DESCRIPTION("CZ.NIC's Turris Omnia MCU");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h
new file mode 100644
index 000000000000..5b21fbca8fe1
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * CZ.NIC's Turris Omnia MCU driver
+ *
+ * 2024 by Marek Behún <kabel@kernel.org>
+ */
+
+#ifndef __TURRIS_OMNIA_MCU_H
+#define __TURRIS_OMNIA_MCU_H
+
+#include <linux/i2c.h>
+#include <linux/if_ether.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+struct omnia_mcu {
+ struct i2c_client *client;
+ const char *type;
+ u32 features;
+
+ /* board information */
+ u64 board_serial_number;
+ u8 board_first_mac[ETH_ALEN];
+ u8 board_revision;
+};
+
+int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply,
+ unsigned int len);
+
+static inline int omnia_cmd_read_u16(const struct i2c_client *client, u8 cmd)
+{
+ __le16 reply;
+ int err;
+
+ err = omnia_cmd_read(client, cmd, &reply, sizeof(reply));
+
+ return err ?: le16_to_cpu(reply);
+}
+
+static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd)
+{
+ u8 reply;
+ int err;
+
+ err = omnia_cmd_read(client, cmd, &reply, sizeof(reply));
+
+ return err ?: reply;
+}
+
+#endif /* __TURRIS_OMNIA_MCU_H */
diff --git a/include/linux/turris-omnia-mcu-interface.h b/include/linux/turris-omnia-mcu-interface.h
new file mode 100644
index 000000000000..88f8490b5897
--- /dev/null
+++ b/include/linux/turris-omnia-mcu-interface.h
@@ -0,0 +1,249 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * CZ.NIC's Turris Omnia MCU I2C interface commands definitions
+ *
+ * 2024 by Marek Behún <kabel@kernel.org>
+ */
+
+#ifndef __TURRIS_OMNIA_MCU_INTERFACE_H
+#define __TURRIS_OMNIA_MCU_INTERFACE_H
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+
+enum omnia_commands_e {
+ CMD_GET_STATUS_WORD = 0x01, /* slave sends status word back */
+ CMD_GENERAL_CONTROL = 0x02,
+ CMD_LED_MODE = 0x03, /* default/user */
+ CMD_LED_STATE = 0x04, /* LED on/off */
+ CMD_LED_COLOR = 0x05, /* LED number + RED + GREEN + BLUE */
+ CMD_USER_VOLTAGE = 0x06,
+ CMD_SET_BRIGHTNESS = 0x07,
+ CMD_GET_BRIGHTNESS = 0x08,
+ CMD_GET_RESET = 0x09,
+ CMD_GET_FW_VERSION_APP = 0x0A, /* 20B git hash number */
+ CMD_SET_WATCHDOG_STATE = 0x0B, /* 0 - disable
+ * 1 - enable / ping
+ * after boot watchdog is started
+ * with 2 minutes timeout
+ */
+
+ /* CMD_WATCHDOG_STATUS = 0x0C, not implemented anymore */
+
+ CMD_GET_WATCHDOG_STATE = 0x0D,
+ CMD_GET_FW_VERSION_BOOT = 0x0E, /* 20B git hash number */
+ CMD_GET_FW_CHECKSUM = 0x0F, /* 4B length, 4B checksum */
+
+ /* available if FEATURES_SUPPORTED bit set in status word */
+ CMD_GET_FEATURES = 0x10,
+
+ /* available if EXT_CMD bit set in features */
+ CMD_GET_EXT_STATUS_DWORD = 0x11,
+ CMD_EXT_CONTROL = 0x12,
+ CMD_GET_EXT_CONTROL_STATUS = 0x13,
+
+ /* available if NEW_INT_API bit set in features */
+ CMD_GET_INT_AND_CLEAR = 0x14,
+ CMD_GET_INT_MASK = 0x15,
+ CMD_SET_INT_MASK = 0x16,
+
+ /* available if FLASHING bit set in features */
+ CMD_FLASH = 0x19,
+
+ /* available if WDT_PING bit set in features */
+ CMD_SET_WDT_TIMEOUT = 0x20,
+ CMD_GET_WDT_TIMELEFT = 0x21,
+
+ /* available if POWEROFF_WAKEUP bit set in features */
+ CMD_SET_WAKEUP = 0x22,
+ CMD_GET_UPTIME_AND_WAKEUP = 0x23,
+ CMD_POWER_OFF = 0x24,
+
+ /* available if USB_OVC_PROT_SETTING bit set in features */
+ CMD_SET_USB_OVC_PROT = 0x25,
+ CMD_GET_USB_OVC_PROT = 0x26,
+
+ /* available if TRNG bit set in features */
+ CMD_TRNG_COLLECT_ENTROPY = 0x28,
+
+ /* available if CRYPTO bit set in features */
+ CMD_CRYPTO_GET_PUBLIC_KEY = 0x29,
+ CMD_CRYPTO_SIGN_MESSAGE = 0x2A,
+ CMD_CRYPTO_COLLECT_SIGNATURE = 0x2B,
+
+ /* available if BOARD_INFO it set in features */
+ CMD_BOARD_INFO_GET = 0x2C,
+ CMD_BOARD_INFO_BURN = 0x2D,
+
+ /* available only at address 0x2b (led-controller) */
+ /* available only if LED_GAMMA_CORRECTION bit set in features */
+ CMD_SET_GAMMA_CORRECTION = 0x30,
+ CMD_GET_GAMMA_CORRECTION = 0x31,
+
+ /* available only at address 0x2b (led-controller) */
+ /* available only if PER_LED_CORRECTION bit set in features */
+ /* available only if FROM_BIT_16_INVALID bit NOT set in features */
+ CMD_SET_LED_CORRECTIONS = 0x32,
+ CMD_GET_LED_CORRECTIONS = 0x33,
+};
+
+enum omnia_flashing_commands_e {
+ FLASH_CMD_UNLOCK = 0x01,
+ FLASH_CMD_SIZE_AND_CSUM = 0x02,
+ FLASH_CMD_PROGRAM = 0x03,
+ FLASH_CMD_RESET = 0x04,
+};
+
+enum omnia_sts_word_e {
+ STS_MCU_TYPE_MASK = GENMASK(1, 0),
+ STS_MCU_TYPE_STM32 = 0 << 0,
+ STS_MCU_TYPE_GD32 = 1 << 0,
+ STS_MCU_TYPE_MKL = 2 << 0,
+ STS_FEATURES_SUPPORTED = BIT(2),
+ STS_USER_REGULATOR_NOT_SUPPORTED = BIT(3),
+ STS_CARD_DET = BIT(4),
+ STS_MSATA_IND = BIT(5),
+ STS_USB30_OVC = BIT(6),
+ STS_USB31_OVC = BIT(7),
+ STS_USB30_PWRON = BIT(8),
+ STS_USB31_PWRON = BIT(9),
+ STS_ENABLE_4V5 = BIT(10),
+ STS_BUTTON_MODE = BIT(11),
+ STS_BUTTON_PRESSED = BIT(12),
+ STS_BUTTON_COUNTER_MASK = GENMASK(15, 13)
+};
+
+enum omnia_ctl_byte_e {
+ CTL_LIGHT_RST = BIT(0),
+ CTL_HARD_RST = BIT(1),
+ /* BIT(2) is currently reserved */
+ CTL_USB30_PWRON = BIT(3),
+ CTL_USB31_PWRON = BIT(4),
+ CTL_ENABLE_4V5 = BIT(5),
+ CTL_BUTTON_MODE = BIT(6),
+ CTL_BOOTLOADER = BIT(7)
+};
+
+enum omnia_features_e {
+ FEAT_PERIPH_MCU = BIT(0),
+ FEAT_EXT_CMDS = BIT(1),
+ FEAT_WDT_PING = BIT(2),
+ FEAT_LED_STATE_EXT_MASK = GENMASK(4, 3),
+ FEAT_LED_STATE_EXT = 1 << 3,
+ FEAT_LED_STATE_EXT_V32 = 2 << 3,
+ FEAT_LED_GAMMA_CORRECTION = BIT(5),
+ FEAT_NEW_INT_API = BIT(6),
+ FEAT_BOOTLOADER = BIT(7),
+ FEAT_FLASHING = BIT(8),
+ FEAT_NEW_MESSAGE_API = BIT(9),
+ FEAT_BRIGHTNESS_INT = BIT(10),
+ FEAT_POWEROFF_WAKEUP = BIT(11),
+ FEAT_CAN_OLD_MESSAGE_API = BIT(12),
+ FEAT_TRNG = BIT(13),
+ FEAT_CRYPTO = BIT(14),
+ FEAT_BOARD_INFO = BIT(15),
+
+ /*
+ * Orginally the features command replied only 16 bits. If more were
+ * read, either the I2C transaction failed or 0xff bytes were sent.
+ * Therefore to consider bits 16 - 31 valid, one bit (20) was reserved
+ * to be zero.
+ */
+
+ /* Bits 16 - 19 correspond to bits 0 - 3 of status word */
+ FEAT_MCU_TYPE_MASK = GENMASK(17, 16),
+ FEAT_MCU_TYPE_STM32 = 0 << 16,
+ FEAT_MCU_TYPE_GD32 = 1 << 16,
+ FEAT_MCU_TYPE_MKL = 2 << 16,
+ FEAT_FEATURES_SUPPORTED = BIT(18),
+ FEAT_USER_REGULATOR_NOT_SUPPORTED = BIT(19),
+
+ /* must not be set */
+ FEAT_FROM_BIT_16_INVALID = BIT(20),
+
+ FEAT_PER_LED_CORRECTION = BIT(21),
+ FEAT_USB_OVC_PROT_SETTING = BIT(22),
+};
+
+enum omnia_ext_sts_dword_e {
+ EXT_STS_SFP_nDET = BIT(0),
+ EXT_STS_LED_STATES_MASK = GENMASK(31, 12),
+ EXT_STS_WLAN0_MSATA_LED = BIT(12),
+ EXT_STS_WLAN1_LED = BIT(13),
+ EXT_STS_WLAN2_LED = BIT(14),
+ EXT_STS_WPAN0_LED = BIT(15),
+ EXT_STS_WPAN1_LED = BIT(16),
+ EXT_STS_WPAN2_LED = BIT(17),
+ EXT_STS_WAN_LED0 = BIT(18),
+ EXT_STS_WAN_LED1 = BIT(19),
+ EXT_STS_LAN0_LED0 = BIT(20),
+ EXT_STS_LAN0_LED1 = BIT(21),
+ EXT_STS_LAN1_LED0 = BIT(22),
+ EXT_STS_LAN1_LED1 = BIT(23),
+ EXT_STS_LAN2_LED0 = BIT(24),
+ EXT_STS_LAN2_LED1 = BIT(25),
+ EXT_STS_LAN3_LED0 = BIT(26),
+ EXT_STS_LAN3_LED1 = BIT(27),
+ EXT_STS_LAN4_LED0 = BIT(28),
+ EXT_STS_LAN4_LED1 = BIT(29),
+ EXT_STS_LAN5_LED0 = BIT(30),
+ EXT_STS_LAN5_LED1 = BIT(31),
+};
+
+enum omnia_ext_ctl_e {
+ EXT_CTL_nRES_MMC = BIT(0),
+ EXT_CTL_nRES_LAN = BIT(1),
+ EXT_CTL_nRES_PHY = BIT(2),
+ EXT_CTL_nPERST0 = BIT(3),
+ EXT_CTL_nPERST1 = BIT(4),
+ EXT_CTL_nPERST2 = BIT(5),
+ EXT_CTL_PHY_SFP = BIT(6),
+ EXT_CTL_PHY_SFP_AUTO = BIT(7),
+ EXT_CTL_nVHV_CTRL = BIT(8),
+};
+
+enum omnia_int_e {
+ INT_CARD_DET = BIT(0),
+ INT_MSATA_IND = BIT(1),
+ INT_USB30_OVC = BIT(2),
+ INT_USB31_OVC = BIT(3),
+ INT_BUTTON_PRESSED = BIT(4),
+ INT_SFP_nDET = BIT(5),
+ INT_BRIGHTNESS_CHANGED = BIT(6),
+ INT_TRNG = BIT(7),
+ INT_MESSAGE_SIGNED = BIT(8),
+
+ INT_LED_STATES_MASK = GENMASK(31, 12),
+ INT_WLAN0_MSATA_LED = BIT(12),
+ INT_WLAN1_LED = BIT(13),
+ INT_WLAN2_LED = BIT(14),
+ INT_WPAN0_LED = BIT(15),
+ INT_WPAN1_LED = BIT(16),
+ INT_WPAN2_LED = BIT(17),
+ INT_WAN_LED0 = BIT(18),
+ INT_WAN_LED1 = BIT(19),
+ INT_LAN0_LED0 = BIT(20),
+ INT_LAN0_LED1 = BIT(21),
+ INT_LAN1_LED0 = BIT(22),
+ INT_LAN1_LED1 = BIT(23),
+ INT_LAN2_LED0 = BIT(24),
+ INT_LAN2_LED1 = BIT(25),
+ INT_LAN3_LED0 = BIT(26),
+ INT_LAN3_LED1 = BIT(27),
+ INT_LAN4_LED0 = BIT(28),
+ INT_LAN4_LED1 = BIT(29),
+ INT_LAN5_LED0 = BIT(30),
+ INT_LAN5_LED1 = BIT(31),
+};
+
+enum omnia_cmd_poweroff_e {
+ CMD_POWER_OFF_POWERON_BUTTON = BIT(0),
+ CMD_POWER_OFF_MAGIC = 0xdead,
+};
+
+enum cmd_usb_ovc_prot_e {
+ CMD_xET_USB_OVC_PROT_PORT_MASK = GENMASK(3, 0),
+ CMD_xET_USB_OVC_PROT_ENABLE = BIT(4),
+};
+
+#endif /* __TURRIS_OMNIA_MCU_INTERFACE_H */
--
2.43.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v6 04/11] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup
2024-04-18 12:11 [PATCH v6 00/11] Turris Omnia MCU driver Marek Behún
2024-04-18 12:11 ` [PATCH v6 02/11] platform: cznic: Add preliminary support for Turris Omnia MCU Marek Behún
@ 2024-04-18 12:11 ` Marek Behún
2024-04-23 16:05 ` [PATCH v6 00/11] Turris Omnia MCU driver Andy Shevchenko
2 siblings, 0 replies; 4+ messages in thread
From: Marek Behún @ 2024-04-18 12:11 UTC (permalink / raw)
To: Gregory CLEMENT, Arnd Bergmann, soc, Alessandro Zummo,
Alexandre Belloni, Andy Shevchenko, Bartosz Golaszewski,
Linus Walleij, linux-rtc
Cc: arm, Marek Behún
Add support for true board poweroff (MCU can disable all unnecessary
voltage regulators) and wakeup at a specified time, implemented via a
RTC driver so that the rtcwake utility can be used to configure it.
Signed-off-by: Marek Behún <kabel@kernel.org>
---
.../sysfs-bus-i2c-devices-turris-omnia-mcu | 16 ++
drivers/platform/cznic/Kconfig | 4 +
drivers/platform/cznic/Makefile | 1 +
.../platform/cznic/turris-omnia-mcu-base.c | 5 +
.../cznic/turris-omnia-mcu-sys-off-wakeup.c | 258 ++++++++++++++++++
drivers/platform/cznic/turris-omnia-mcu.h | 20 ++
6 files changed, 304 insertions(+)
create mode 100644 drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c
diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
index b27b60d00c87..564119849388 100644
--- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
@@ -38,6 +38,22 @@ Description: (RW) The front button on the Turris Omnia router can be
Format: %s.
+What: /sys/bus/i2c/devices/<mcu_device>/front_button_poweron
+Date: July 2024
+KernelVersion: 6.10
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RW) Newer versions of the microcontroller firmware of the
+ Turris Omnia router support powering off the router into true
+ low power mode. The router can be powered on by pressing the
+ front button.
+
+ This file configures whether front button power on is enabled.
+
+ This file is present only if the power off feature is supported
+ by the firmware.
+
+ Format: %i.
+
What: /sys/bus/i2c/devices/<mcu_device>/fw_features
Date: July 2024
KernelVersion: 6.10
diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig
index 3a8c3edcd7e6..0a752aa654fa 100644
--- a/drivers/platform/cznic/Kconfig
+++ b/drivers/platform/cznic/Kconfig
@@ -19,10 +19,14 @@ config TURRIS_OMNIA_MCU
depends on I2C
select GPIOLIB
select GPIOLIB_IRQCHIP
+ select RTC_CLASS
help
Say Y here to add support for the features implemented by the
microcontroller on the CZ.NIC's Turris Omnia SOHO router.
The features include:
+ - board poweroff into true low power mode (with voltage regulators
+ disabled) and the ability to configure wake up from this mode (via
+ rtcwake)
- GPIO pins
- to get front button press events (the front button can be
configured either to generate press events to the CPU or to change
diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile
index 53fd8f1777a3..a185ef882e44 100644
--- a/drivers/platform/cznic/Makefile
+++ b/drivers/platform/cznic/Makefile
@@ -3,3 +3,4 @@
obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o
turris-omnia-mcu-y := turris-omnia-mcu-base.o
turris-omnia-mcu-y += turris-omnia-mcu-gpio.o
+turris-omnia-mcu-y += turris-omnia-mcu-sys-off-wakeup.o
diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c
index 708b084cb5da..697ace090bda 100644
--- a/drivers/platform/cznic/turris-omnia-mcu-base.c
+++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
@@ -195,6 +195,7 @@ static const struct attribute_group omnia_mcu_base_group = {
static const struct attribute_group *omnia_mcu_groups[] = {
&omnia_mcu_base_group,
&omnia_mcu_gpio_group,
+ &omnia_mcu_poweroff_group,
NULL
};
@@ -360,6 +361,10 @@ static int omnia_mcu_probe(struct i2c_client *client)
"Cannot read board info\n");
}
+ err = omnia_mcu_register_sys_off_and_wakeup(mcu);
+ if (err)
+ return err;
+
return omnia_mcu_register_gpiochip(mcu);
}
diff --git a/drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c b/drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c
new file mode 100644
index 000000000000..fbd1b4cd7011
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CZ.NIC's Turris Omnia MCU system off and RTC wakeup driver
+ *
+ * This is not a true RTC driver (in the sense that it does not provide a
+ * real-time clock), rather the MCU implements a wakeup from powered off state
+ * at a specified time relative to MCU boot, and we expose this feature via RTC
+ * alarm, so that it can be used via the rtcwake command, which is the standard
+ * Linux command for this.
+ *
+ * 2024 by Marek Behún <kabel@kernel.org>
+ */
+
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/reboot.h>
+#include <linux/rtc.h>
+#include <linux/sysfs.h>
+#include <linux/turris-omnia-mcu-interface.h>
+#include <linux/types.h>
+
+#include "turris-omnia-mcu.h"
+
+static int omnia_get_uptime_wakeup(const struct i2c_client *client, u32 *uptime,
+ u32 *wakeup)
+{
+ __le32 reply[2];
+ int err;
+
+ err = omnia_cmd_read(client, CMD_GET_UPTIME_AND_WAKEUP, reply,
+ sizeof(reply));
+ if (err)
+ return err;
+
+ if (uptime)
+ *uptime = le32_to_cpu(reply[0]);
+
+ if (wakeup)
+ *wakeup = le32_to_cpu(reply[1]);
+
+ return 0;
+}
+
+static int omnia_read_time(struct device *dev, struct rtc_time *tm)
+{
+ u32 uptime;
+ int err;
+
+ err = omnia_get_uptime_wakeup(to_i2c_client(dev), &uptime, NULL);
+ if (err)
+ return err;
+
+ rtc_time64_to_tm(uptime, tm);
+
+ return 0;
+}
+
+static int omnia_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct omnia_mcu *mcu = i2c_get_clientdata(client);
+ u32 wakeup;
+ int err;
+
+ err = omnia_get_uptime_wakeup(client, NULL, &wakeup);
+ if (err)
+ return err;
+
+ alrm->enabled = !!wakeup;
+ rtc_time64_to_tm(wakeup ?: mcu->rtc_alarm, &alrm->time);
+
+ return 0;
+}
+
+static int omnia_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct omnia_mcu *mcu = i2c_get_clientdata(client);
+
+ mcu->rtc_alarm = rtc_tm_to_time64(&alrm->time);
+
+ if (alrm->enabled)
+ return omnia_cmd_write_u32(client, CMD_SET_WAKEUP,
+ mcu->rtc_alarm);
+
+ return 0;
+}
+
+static int omnia_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct omnia_mcu *mcu = i2c_get_clientdata(client);
+
+ return omnia_cmd_write_u32(client, CMD_SET_WAKEUP,
+ enabled ? mcu->rtc_alarm : 0);
+}
+
+static const struct rtc_class_ops omnia_rtc_ops = {
+ .read_time = omnia_read_time,
+ .read_alarm = omnia_read_alarm,
+ .set_alarm = omnia_set_alarm,
+ .alarm_irq_enable = omnia_alarm_irq_enable,
+};
+
+static int omnia_power_off(struct sys_off_data *data)
+{
+ struct omnia_mcu *mcu = data->cb_data;
+ __be32 tmp;
+ u8 cmd[9];
+ u16 arg;
+ int err;
+
+ if (mcu->front_button_poweron)
+ arg = CMD_POWER_OFF_POWERON_BUTTON;
+ else
+ arg = 0;
+
+ cmd[0] = CMD_POWER_OFF;
+ put_unaligned_le16(CMD_POWER_OFF_MAGIC, &cmd[1]);
+ put_unaligned_le16(arg, &cmd[3]);
+
+ /*
+ * Although all values from and to MCU are passed in little-endian, the
+ * MCU's CRC unit uses big-endian CRC32 polynomial (0x04c11db7), so we
+ * need to use crc32_be() here.
+ */
+ tmp = cpu_to_be32(get_unaligned_le32(&cmd[1]));
+ put_unaligned_le32(crc32_be(0xffffffff, (void *)&tmp, sizeof(tmp)),
+ &cmd[5]);
+
+ err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd));
+ if (err)
+ dev_err(&mcu->client->dev,
+ "Unable to send the poweroff command: %d\n", err);
+
+ return NOTIFY_DONE;
+}
+
+static int omnia_restart(struct sys_off_data *data)
+{
+ struct omnia_mcu *mcu = data->cb_data;
+ u8 cmd[3];
+ int err;
+
+ cmd[0] = CMD_GENERAL_CONTROL;
+
+ if (reboot_mode == REBOOT_HARD)
+ cmd[1] = cmd[2] = CTL_HARD_RST;
+ else
+ cmd[1] = cmd[2] = CTL_LIGHT_RST;
+
+ err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd));
+ if (err)
+ dev_err(&mcu->client->dev,
+ "Unable to send the restart command: %d\n", err);
+
+ /*
+ * MCU needs a little bit to process the I2C command, otherwise it will
+ * do a light reset based on SOC SYSRES_OUT pin.
+ */
+ mdelay(1);
+
+ return NOTIFY_DONE;
+}
+
+static ssize_t front_button_poweron_show(struct device *dev,
+ struct device_attribute *a, char *buf)
+{
+ struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%d\n", mcu->front_button_poweron);
+}
+
+static ssize_t front_button_poweron_store(struct device *dev,
+ struct device_attribute *a,
+ const char *buf, size_t count)
+{
+ struct omnia_mcu *mcu = dev_get_drvdata(dev);
+ bool val;
+ int err;
+
+ err = kstrtobool(buf, &val);
+ if (err)
+ return err;
+
+ mcu->front_button_poweron = val;
+
+ return count;
+}
+static DEVICE_ATTR_RW(front_button_poweron);
+
+static struct attribute *omnia_mcu_poweroff_attrs[] = {
+ &dev_attr_front_button_poweron.attr,
+ NULL
+};
+
+static umode_t poweroff_attrs_visible(struct kobject *kobj, struct attribute *a,
+ int n)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+ if (mcu->features & FEAT_POWEROFF_WAKEUP)
+ return a->mode;
+
+ return 0;
+}
+
+const struct attribute_group omnia_mcu_poweroff_group = {
+ .attrs = omnia_mcu_poweroff_attrs,
+ .is_visible = poweroff_attrs_visible,
+};
+
+int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu)
+{
+ struct device *dev = &mcu->client->dev;
+ int err;
+
+ /* MCU restart is always available */
+ err = devm_register_sys_off_handler(dev, SYS_OFF_MODE_RESTART,
+ SYS_OFF_PRIO_FIRMWARE,
+ omnia_restart, mcu);
+ if (err)
+ return dev_err_probe(dev, err,
+ "Cannot register system restart handler\n");
+
+ /*
+ * Poweroff and wakeup are available only if POWEROFF_WAKEUP feature is
+ * present.
+ */
+ if (!(mcu->features & FEAT_POWEROFF_WAKEUP))
+ return 0;
+
+ err = devm_register_sys_off_handler(dev, SYS_OFF_MODE_POWER_OFF,
+ SYS_OFF_PRIO_FIRMWARE,
+ omnia_power_off, mcu);
+ if (err)
+ return dev_err_probe(dev, err,
+ "Cannot register system power off handler\n");
+
+ mcu->rtcdev = devm_rtc_allocate_device(dev);
+ if (IS_ERR(mcu->rtcdev))
+ return dev_err_probe(dev, PTR_ERR(mcu->rtcdev),
+ "Cannot allocate RTC device\n");
+
+ mcu->rtcdev->ops = &omnia_rtc_ops;
+ mcu->rtcdev->range_max = U32_MAX;
+ set_bit(RTC_FEATURE_ALARM_WAKEUP_ONLY, mcu->rtcdev->features);
+
+ err = devm_rtc_register_device(mcu->rtcdev);
+ if (err)
+ return dev_err_probe(dev, err, "Cannot register RTC device\n");
+
+ mcu->front_button_poweron = true;
+
+ return 0;
+}
diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h
index e8d9bf1c8fdc..6179a4f2069e 100644
--- a/drivers/platform/cznic/turris-omnia-mcu.h
+++ b/drivers/platform/cznic/turris-omnia-mcu.h
@@ -12,9 +12,11 @@
#include <linux/gpio/driver.h>
#include <linux/if_ether.h>
#include <linux/mutex.h>
+#include <linux/rtc.h>
#include <linux/types.h>
#include <linux/workqueue.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
struct omnia_mcu {
struct i2c_client *client;
@@ -34,6 +36,11 @@ struct omnia_mcu {
struct delayed_work button_release_emul_work;
u16 last_status;
bool button_pressed_emul;
+
+ /* RTC device for configuring wake-up */
+ struct rtc_device *rtcdev;
+ u32 rtc_alarm;
+ bool front_button_poweron;
};
int omnia_cmd_write_read(const struct i2c_client *client,
@@ -46,6 +53,17 @@ static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd,
return omnia_cmd_write_read(client, cmd, len, NULL, 0);
}
+static inline int omnia_cmd_write_u32(const struct i2c_client *client, u8 cmd,
+ u32 val)
+{
+ u8 buf[5];
+
+ buf[0] = cmd;
+ put_unaligned_le32(val, &buf[1]);
+
+ return omnia_cmd_write(client, buf, sizeof(buf));
+}
+
static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd,
void *reply, unsigned int len)
{
@@ -107,7 +125,9 @@ static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd)
}
extern const struct attribute_group omnia_mcu_gpio_group;
+extern const struct attribute_group omnia_mcu_poweroff_group;
int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu);
+int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu);
#endif /* __TURRIS_OMNIA_MCU_H */
--
2.43.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v6 00/11] Turris Omnia MCU driver
2024-04-18 12:11 [PATCH v6 00/11] Turris Omnia MCU driver Marek Behún
2024-04-18 12:11 ` [PATCH v6 02/11] platform: cznic: Add preliminary support for Turris Omnia MCU Marek Behún
2024-04-18 12:11 ` [PATCH v6 04/11] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup Marek Behún
@ 2024-04-23 16:05 ` Andy Shevchenko
2 siblings, 0 replies; 4+ messages in thread
From: Andy Shevchenko @ 2024-04-23 16:05 UTC (permalink / raw)
To: Marek Behún
Cc: Gregory CLEMENT, Arnd Bergmann, soc, Alessandro Zummo,
Alexandre Belloni, Bartosz Golaszewski, Christophe JAILLET,
Dan Carpenter, devicetree, Greg Kroah-Hartman, Guenter Roeck,
Hans de Goede, Herbert Xu, Krzysztof Kozlowski, Linus Walleij,
linux-crypto, linux-gpio, linux-rtc, linux-watchdog,
Matti Vaittinen, Olivia Mackall, Rob Herring, Wim Van Sebroeck,
arm, Andrew Lunn, Conor Dooley, Krzysztof Kozlowski, Rob Herring,
Sebastian Hesselbarth, Uwe Kleine-König
On Thu, Apr 18, 2024 at 02:11:05PM +0200, Marek Behún wrote:
> Hello Andy, Dan, Linus, Arnd, Gregory, and others,
>
> I am sending v6 of the series adding Turris Omnia MCU driver.
>
> This series depends on the immutable branch between LEDs and locking,
> introducing devm_mutex_init(), see the PR
> https://lore.kernel.org/linux-leds/20240412084616.GR2399047@google.com/
...
> devm-helpers: Add resource managed version of irq_create_mapping()
> devm-helpers: Add resource managed version of debugfs directory create
> function
IIUC you created them as static inline, the header will become yet another
cumbersome and messy "kernel.h". Can we prevent that?
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-04-23 16:06 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-18 12:11 [PATCH v6 00/11] Turris Omnia MCU driver Marek Behún
2024-04-18 12:11 ` [PATCH v6 02/11] platform: cznic: Add preliminary support for Turris Omnia MCU Marek Behún
2024-04-18 12:11 ` [PATCH v6 04/11] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup Marek Behún
2024-04-23 16:05 ` [PATCH v6 00/11] Turris Omnia MCU driver Andy Shevchenko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).