* [PATCH] cdrom: support Beurer GL50 evo CD-on-a-chip devices.
@ 2019-11-11 13:29 Diego Elio Pettenò
2019-11-19 16:08 ` Jens Axboe
0 siblings, 1 reply; 2+ messages in thread
From: Diego Elio Pettenò @ 2019-11-11 13:29 UTC (permalink / raw)
To: Jens Axboe; +Cc: Diego Elio Pettenò, linux-scsi
The Beurer GL50 evo uses a Cygnal/Cypress-manufactured CD-on-a-chip that
only accepts a subset of SCSI commands.
Most of the not-implemented commands are fine to fail, but a few,
particularly around the MMC or Audio commands, will put the device into an
unrecoverable state, so they need to be avoided at all costs.
In addition to adding a new vendor entry to sr_vendor, this required gating
a few functions in the cdrom driver to not even try sending the command
when the capability is not present.
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
---
drivers/cdrom/cdrom.c | 13 ++++++++++++-
drivers/scsi/sr_vendor.c | 18 ++++++++++++++++++
2 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index ac42ae4651ce..2391b5dd36a9 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -996,6 +996,12 @@ static void cdrom_count_tracks(struct cdrom_device_info *cdi, tracktype *tracks)
tracks->xa = 0;
tracks->error = 0;
cd_dbg(CD_COUNT_TRACKS, "entering cdrom_count_tracks\n");
+
+ if (!CDROM_CAN(CDC_PLAY_AUDIO)) {
+ tracks->error = CDS_NO_INFO;
+ return;
+ }
+
/* Grab the TOC header so we can see how many tracks there are */
ret = cdi->ops->audio_ioctl(cdi, CDROMREADTOCHDR, &header);
if (ret) {
@@ -1162,7 +1168,9 @@ int cdrom_open(struct cdrom_device_info *cdi, struct block_device *bdev,
ret = open_for_data(cdi);
if (ret)
goto err;
- cdrom_mmc3_profile(cdi);
+ if (CDROM_CAN(CDC_GENERIC_PACKET)) {
+ cdrom_mmc3_profile(cdi);
+ }
if (mode & FMODE_WRITE) {
ret = -EROFS;
if (cdrom_open_write(cdi))
@@ -2882,6 +2890,9 @@ int cdrom_get_last_written(struct cdrom_device_info *cdi, long *last_written)
it doesn't give enough information or fails. then we return
the toc contents. */
use_toc:
+ if (!CDROM_CAN(CDC_PLAY_AUDIO))
+ return -ENOSYS;
+
toc.cdte_format = CDROM_MSF;
toc.cdte_track = CDROM_LEADOUT;
if ((ret = cdi->ops->audio_ioctl(cdi, CDROMREADTOCENTRY, &toc)))
diff --git a/drivers/scsi/sr_vendor.c b/drivers/scsi/sr_vendor.c
index e3b0ce25162b..b5e76869d473 100644
--- a/drivers/scsi/sr_vendor.c
+++ b/drivers/scsi/sr_vendor.c
@@ -61,6 +61,7 @@
#define VENDOR_NEC 2
#define VENDOR_TOSHIBA 3
#define VENDOR_WRITER 4 /* pre-scsi3 writers */
+#define VENDOR_CYGNAL_85ED 5 /* CD-on-a-chip */
#define VENDOR_TIMEOUT 30*HZ
@@ -99,6 +100,23 @@ void sr_vendor_init(Scsi_CD *cd)
} else if (!strncmp(vendor, "TOSHIBA", 7)) {
cd->vendor = VENDOR_TOSHIBA;
+ } else if (!strncmp(vendor, "Beurer", 6) &&
+ !strncmp(model, "Gluco Memory", 12)) {
+ /* The Beurer GL50 evo uses a Cygnal/Cypress-manufactured
+ CD-on-a-chip that only accepts a subset of SCSI commands.
+ Most of the not-implemented commands are fine to fail, but a
+ few, particularly around the MMC or Audio commands, will put
+ the device into an unrecoverable state, so they need to be
+ avoided at all costs.
+ */
+ cd->vendor = VENDOR_CYGNAL_85ED;
+ cd->cdi.mask |= (
+ CDC_MULTI_SESSION |
+ CDC_CLOSE_TRAY | CDC_OPEN_TRAY |
+ CDC_LOCK |
+ CDC_GENERIC_PACKET |
+ CDC_PLAY_AUDIO
+ );
}
#endif
}
--
2.23.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] cdrom: support Beurer GL50 evo CD-on-a-chip devices.
2019-11-11 13:29 [PATCH] cdrom: support Beurer GL50 evo CD-on-a-chip devices Diego Elio Pettenò
@ 2019-11-19 16:08 ` Jens Axboe
0 siblings, 0 replies; 2+ messages in thread
From: Jens Axboe @ 2019-11-19 16:08 UTC (permalink / raw)
To: Diego Elio Pettenò; +Cc: linux-scsi
On 11/11/19 6:29 AM, Diego Elio Pettenò wrote:
> The Beurer GL50 evo uses a Cygnal/Cypress-manufactured CD-on-a-chip that
> only accepts a subset of SCSI commands.
>
> Most of the not-implemented commands are fine to fail, but a few,
> particularly around the MMC or Audio commands, will put the device into an
> unrecoverable state, so they need to be avoided at all costs.
>
> In addition to adding a new vendor entry to sr_vendor, this required gating
> a few functions in the cdrom driver to not even try sending the command
> when the capability is not present.
This is pretty horrible, but not really your fault. Just one minor note:
> @@ -1162,7 +1168,9 @@ int cdrom_open(struct cdrom_device_info *cdi, struct block_device *bdev,
> ret = open_for_data(cdi);
> if (ret)
> goto err;
> - cdrom_mmc3_profile(cdi);
> + if (CDROM_CAN(CDC_GENERIC_PACKET)) {
> + cdrom_mmc3_profile(cdi);
> + }
> if (mode & FMODE_WRITE) {
> ret = -EROFS;
> if (cdrom_open_write(cdi))
Just make that:
if (CDROM_CAN(CDC_GENERIC_PACKET))
cdrom_mmc3_profile(cdi);
And you probably want to split this patch into two, one with the
necessary changes to cdrom.c, and one that adds the Beuer device to
sr_vendor.c.
--
Jens Axboe
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-11-19 16:09 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-11 13:29 [PATCH] cdrom: support Beurer GL50 evo CD-on-a-chip devices Diego Elio Pettenò
2019-11-19 16:08 ` Jens Axboe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).