From: Cyril Chemparathy <cyril@ti.com>
To: davinci-linux-open-source@linux.davincidsp.com,
spi-devel-general@lists.sourceforge.net, sameo@linux.intel.com,
rpurdie@rpsys.net, dbrownell@users.sourceforge.net
Cc: c-park@ti.com, linux-arm-kernel@lists.arm.linux.org.uk,
linux-kernel@vger.kernel.org, Cyril Chemparathy <cyril@ti.com>
Subject: [PATCH v8 05/11] davinci: add tnetv107x ssp platform device
Date: Tue, 18 Jan 2011 14:21:39 -0500 [thread overview]
Message-ID: <1295378505-15221-6-git-send-email-cyril@ti.com> (raw)
In-Reply-To: <1295378505-15221-1-git-send-email-cyril@ti.com>
This patch adds an SSP platform device definition for the tnetv107x soc family.
The clock lookup entry has also been updated to match.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
---
arch/arm/mach-davinci/devices-tnetv107x.c | 25 ++++++++++++++++++++++++
arch/arm/mach-davinci/include/mach/tnetv107x.h | 2 +
arch/arm/mach-davinci/tnetv107x.c | 2 +-
3 files changed, 28 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index 85503de..6162cae 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -35,6 +35,7 @@
#define TNETV107X_SDIO0_BASE 0x08088700
#define TNETV107X_SDIO1_BASE 0x08088800
#define TNETV107X_KEYPAD_BASE 0x08088a00
+#define TNETV107X_SSP_BASE 0x08088c00
#define TNETV107X_ASYNC_EMIF_CNTRL_BASE 0x08200000
#define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE 0x30000000
#define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE 0x40000000
@@ -342,6 +343,25 @@ static struct platform_device tsc_device = {
.resource = tsc_resources,
};
+static struct resource ssp_resources[] = {
+ {
+ .start = TNETV107X_SSP_BASE,
+ .end = TNETV107X_SSP_BASE + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_TNETV107X_SSP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ssp_device = {
+ .name = "ti-ssp",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ssp_resources),
+ .resource = ssp_resources,
+};
+
void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
{
int i, error;
@@ -380,4 +400,9 @@ void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
keypad_device.dev.platform_data = info->keypad_config;
platform_device_register(&keypad_device);
}
+
+ if (info->ssp_config) {
+ ssp_device.dev.platform_data = info->ssp_config;
+ platform_device_register(&ssp_device);
+ }
}
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
index 5a681d8..89c1fdc 100644
--- a/arch/arm/mach-davinci/include/mach/tnetv107x.h
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -34,6 +34,7 @@
#include <linux/serial_8250.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/ti_ssp.h>
#include <mach/mmc.h>
#include <mach/nand.h>
@@ -44,6 +45,7 @@ struct tnetv107x_device_info {
struct davinci_mmc_config *mmc_config[2]; /* 2 controllers */
struct davinci_nand_pdata *nand_config[4]; /* 4 chipsels */
struct matrix_keypad_platform_data *keypad_config;
+ struct ti_ssp_data *ssp_config;
};
extern struct platform_device tnetv107x_wdt_device;
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 6fcdece..1b28fdd 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -278,7 +278,7 @@ static struct clk_lookup clks[] = {
CLK(NULL, "timer1", &clk_timer1),
CLK("tnetv107x_wdt.0", NULL, &clk_wdt_arm),
CLK(NULL, "clk_wdt_dsp", &clk_wdt_dsp),
- CLK("ti-ssp.0", NULL, &clk_ssp),
+ CLK("ti-ssp", NULL, &clk_ssp),
CLK(NULL, "clk_tdm0", &clk_tdm0),
CLK(NULL, "clk_vlynq", &clk_vlynq),
CLK(NULL, "clk_mcdma", &clk_mcdma),
--
1.7.1
next prev parent reply other threads:[~2011-01-18 19:21 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-18 19:21 [PATCH v8 00/11] tnetv107x ssp drivers Cyril Chemparathy
2011-01-18 19:21 ` [PATCH v8 01/11] mfd: add driver for sequencer serial port Cyril Chemparathy
2011-01-19 17:43 ` Kevin Hilman
2011-01-31 0:40 ` Samuel Ortiz
2011-03-17 7:33 ` Nori, Sekhar
2011-01-18 19:21 ` [PATCH v8 02/11] spi: add ti-ssp spi master driver Cyril Chemparathy
2011-01-18 19:21 ` Cyril Chemparathy [this message]
[not found] ` <1295378505-15221-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2011-01-18 19:21 ` [PATCH v8 03/11] gpio: add ti-ssp gpio driver Cyril Chemparathy
[not found] ` <1295378505-15221-4-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2011-02-28 12:34 ` Nori, Sekhar
2011-03-17 18:45 ` Grant Likely
[not found] ` <20110317184514.GP9597-MrY2KI0G/OVr83L8+7iqerDks+cytr/Z@public.gmane.org>
2011-03-18 6:30 ` Nori, Sekhar
2011-01-18 19:21 ` [PATCH v8 04/11] backlight: add support for tps6116x controller Cyril Chemparathy
2011-01-19 17:42 ` Kevin Hilman
2011-01-18 19:21 ` [PATCH v8 06/11] davinci: add ssp config for tnetv107x evm board Cyril Chemparathy
2011-01-18 19:21 ` [PATCH v8 08/11] davinci: add tnetv107x evm regulators Cyril Chemparathy
2011-01-18 19:21 ` [PATCH v8 10/11] davinci: add tnetv107x evm backlight device Cyril Chemparathy
2011-01-18 19:21 ` [PATCH v8 11/11] davinci: add tnetv107x evm i2c eeprom device Cyril Chemparathy
2011-01-18 19:21 ` [PATCH v8 07/11] davinci: add spi devices on tnetv107x evm Cyril Chemparathy
2011-01-18 19:21 ` [PATCH v8 09/11] davinci: add tnetv107x evm ti-ssp gpio device Cyril Chemparathy
-- strict thread matches above, loose matches on Subject: below --
2011-01-17 19:15 [PATCH v8 00/11] tnetv107x ssp drivers Cyril Chemparathy
[not found] ` <1295291725-32509-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org>
2011-01-17 19:15 ` [PATCH v8 05/11] davinci: add tnetv107x ssp platform device Cyril Chemparathy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295378505-15221-6-git-send-email-cyril@ti.com \
--to=cyril@ti.com \
--cc=c-park@ti.com \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=dbrownell@users.sourceforge.net \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=rpurdie@rpsys.net \
--cc=sameo@linux.intel.com \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).