[PATCH v1 1/1] spi: pxa2xx-pci: Balance reference count for PCI DMA device

[PATCH v1 1/1] spi: pxa2xx-pci: Balance reference count for PCI DMA device

[Andy Shevchenko]

The pci_get_slot() increases its reference count, the caller
must decrement the reference count by calling pci_dev_put().

Fixes: 743485ea3bee ("spi: pxa2xx-pci: Do a specific setup in a separate function")
Fixes: 25014521603f ("spi: pxa2xx-pci: Enable DMA for Intel Merrifield")
Reported-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/spi/spi-pxa2xx-pci.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 2e134eb4bd2c..6502fda6243e 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -76,14 +76,23 @@ static bool lpss_dma_filter(struct dma_chan *chan, void *param)
 	return true;
 }
 
+static void lpss_dma_put_device(void *dma_dev)
+{
+	pci_dev_put(dma_dev);
+}
+
 static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 {
 	struct pci_dev *dma_dev;
+	int ret;
 
 	c->num_chipselect = 1;
 	c->max_clk_rate = 50000000;
 
 	dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
+	ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev);
+	if (ret)
+		return ret;
 
 	if (c->tx_param) {
 		struct dw_dma_slave *slave = c->tx_param;
@@ -107,8 +116,9 @@ static int lpss_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 
 static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 {
-	struct pci_dev *dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(21, 0));
 	struct dw_dma_slave *tx, *rx;
+	struct pci_dev *dma_dev;
+	int ret;
 
 	switch (PCI_FUNC(dev->devfn)) {
 	case 0:
@@ -133,6 +143,11 @@ static int mrfld_spi_setup(struct pci_dev *dev, struct pxa_spi_info *c)
 		return -ENODEV;
 	}
 
+	dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(21, 0));
+	ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev);
+	if (ret)
+		return ret;
+
 	tx = c->tx_param;
 	tx->dma_dev = &dma_dev->dev;
 
-- 
2.34.1

Re: [PATCH v1 1/1] spi: pxa2xx-pci: Balance reference count for PCI DMA device

[Mark Brown]

On Wed, 23 Feb 2022 21:16:37 +0200, Andy Shevchenko wrote:
> The pci_get_slot() increases its reference count, the caller
> must decrement the reference count by calling pci_dev_put().
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: pxa2xx-pci: Balance reference count for PCI DMA device
      commit: 609d7ffdc42199a0ec949db057e3b4be6745d6c5

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark