[PATCH v3] spi: stm32: disable device mode with st,stm32f4-spi compatible

[PATCH v3] spi: stm32: disable device mode with st,stm32f4-spi compatible

[Valentin Caron]

STM32 SPI driver is not capable to handle device mode with stm32f4 soc.
Stop probing if this case happens.

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
---
Changes since v2:
- Do not cast of_device_get_match_data() function
- Remove compatible in dev_err

Changes since v1:
- Replace of_match_device()->data by of_device_get_match_data()

 drivers/spi/spi-stm32.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 6d10fa4ab783..536d89e044cf 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -238,6 +238,7 @@ struct stm32_spi;
  * @baud_rate_div_min: minimum baud rate divisor
  * @baud_rate_div_max: maximum baud rate divisor
  * @has_fifo: boolean to know if fifo is used for driver
+ * @has_device_mode: is this compatible capable to switch on device mode
  * @flags: compatible specific SPI controller flags used at registration time
  */
 struct stm32_spi_cfg {
@@ -259,6 +260,7 @@ struct stm32_spi_cfg {
 	unsigned int baud_rate_div_min;
 	unsigned int baud_rate_div_max;
 	bool has_fifo;
+	bool has_device_mode;
 	u16 flags;
 };
 
@@ -1750,6 +1752,7 @@ static const struct stm32_spi_cfg stm32f4_spi_cfg = {
 	.baud_rate_div_min = STM32F4_SPI_BR_DIV_MIN,
 	.baud_rate_div_max = STM32F4_SPI_BR_DIV_MAX,
 	.has_fifo = false,
+	.has_device_mode = false,
 	.flags = SPI_MASTER_MUST_TX,
 };
 
@@ -1774,6 +1777,7 @@ static const struct stm32_spi_cfg stm32h7_spi_cfg = {
 	.baud_rate_div_min = STM32H7_SPI_MBR_DIV_MIN,
 	.baud_rate_div_max = STM32H7_SPI_MBR_DIV_MAX,
 	.has_fifo = true,
+	.has_device_mode = true,
 };
 
 static const struct of_device_id stm32_spi_of_match[] = {
@@ -1798,8 +1802,13 @@ static int stm32_spi_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	bool device_mode;
 	int ret;
+	const struct stm32_spi_cfg *cfg = of_device_get_match_data(&pdev->dev);
 
 	device_mode = of_property_read_bool(np, "spi-slave");
+	if (!cfg->has_device_mode && device_mode) {
+		dev_err(&pdev->dev, "spi-slave not supported\n");
+		return -EPERM;
+	}
 
 	if (device_mode)
 		ctrl = devm_spi_alloc_slave(&pdev->dev, sizeof(struct stm32_spi));
@@ -1817,9 +1826,7 @@ static int stm32_spi_probe(struct platform_device *pdev)
 	spi->device_mode = device_mode;
 	spin_lock_init(&spi->lock);
 
-	spi->cfg = (const struct stm32_spi_cfg *)
-		of_match_device(pdev->dev.driver->of_match_table,
-				&pdev->dev)->data;
+	spi->cfg = cfg;
 
 	spi->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(spi->base))
-- 
2.25.1

Re: [PATCH v3] spi: stm32: disable device mode with st,stm32f4-spi compatible

[Mark Brown]

On Thu, 06 Jul 2023 10:13:42 +0200, Valentin Caron wrote:
> STM32 SPI driver is not capable to handle device mode with stm32f4 soc.
> Stop probing if this case happens.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: stm32: disable device mode with st,stm32f4-spi compatible
      commit: fee681646fc831b154619ac0261afedcc7e671e7

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark