From: Matthias Kaehlcke <mka@chromium.org>
To: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Akash Asthana <akashast@codeaurora.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
wsa@the-dreams.de, broonie@kernel.org,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
linux-i2c@vger.kernel.org, linux-spi@vger.kernel.org,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>, Stephen Boyd <swboyd@chromium.org>,
mgautam@codeaurora.org,
linux-arm-msm <linux-arm-msm@vger.kernel.org>,
linux-serial@vger.kernel.org,
Douglas Anderson <dianders@chromium.org>
Subject: Re: [PATCH 6/6] arm64: dts: sc7180: Add interconnect for QUP and QSPI
Date: Thu, 27 Feb 2020 09:03:29 -0800 [thread overview]
Message-ID: <20200227170329.GI24720@google.com> (raw)
In-Reply-To: <CAHLCerM8Av_x8smUfOS_-TMEMzi1xRjgs0ta7=tqdYL2CgjNrw@mail.gmail.com>
Hi Amit,
the following include is missing:
#include <dt-bindings/interconnect/qcom,sc7180.h>
It was added in v2 of "arm64: dts: sc7180: Add interconnect provider DT.
nodes", but removed in later versions. v2 had a comment requesting to move
the include one line up, my guess is it got lost while doing that.
On Thu, Feb 27, 2020 at 05:41:03PM +0530, Amit Kucheria wrote:
> Hi Akash,
>
>
> On Mon, Feb 17, 2020 at 7:01 PM Akash Asthana <akashast@codeaurora.org> wrote:
> >
> > Add interconnect ports for GENI QUPs and QSPI to set bus capabilities.
> >
> > Signed-off-by: Akash Asthana <akashast@codeaurora.org>
> > ---
> > Note:
> > - This patch depends on series https://patchwork.kernel.org/cover/11313817/
> > [Add SC7180 interconnect provider driver]. It won't compile without that.
>
> I've tried picking up v4 of Odelu's series to add the SC7180 but I'm
> still unable to compile this. I see the following error:
>
> Error: /home/amit/work/sources/worktree-review-pipeline/arch/arm64/boot/dts/qcom/sc7180.dtsi:353.32-33
> syntax error
> FATAL ERROR: Unable to parse input tree
> make[3]: *** [scripts/Makefile.lib:296:
> arch/arm64/boot/dts/qcom/sc7180-idp.dtb] Error 1
>
> As part of picking up the dependencies, I've pulled the following
> series on top of v5.6-rc2:
>
> - https://lore.kernel.org/r/1581932974-21654-2-git-send-email-akashast@codeaurora.org
> - https://lore.kernel.org/r/1581932212-19469-2-git-send-email-akashast@codeaurora.org
> - https://lore.kernel.org/r/1581946205-27189-2-git-send-email-akashast@codeaurora.org
> - https://lore.kernel.org/r/1582646384-1458-2-git-send-email-okukatla@codeaurora.org
> - https://lore.kernel.org/r/20200209183411.17195-2-sibis@codeaurora.org
>
> What am I missing?
>
> I've pushed the aggregate branch here for convenience:
> https://git.linaro.org/people/amit.kucheria/kernel.git/log/
>
> Regards,
> Amit
>
> > arch/arm64/boot/dts/qcom/sc7180.dtsi | 199 +++++++++++++++++++++++++++++++++++
> > 1 file changed, 199 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > index cc5a94f..04569c9 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > @@ -352,6 +352,14 @@
> > interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>,
> > + <&aggre1_noc MASTER_QUP_0
> > + &mc_virt SLAVE_EBI1>;
> > + interconnect-names = "qup-core", "qup-config",
> > + "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -365,6 +373,11 @@
> > interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -376,6 +389,11 @@
> > pinctrl-names = "default";
> > pinctrl-0 = <&qup_uart0_default>;
> > interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -389,6 +407,14 @@
> > interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>,
> > + <&aggre1_noc MASTER_QUP_0
> > + &mc_virt SLAVE_EBI1>;
> > + interconnect-names = "qup-core", "qup-config",
> > + "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -402,6 +428,11 @@
> > interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -413,6 +444,11 @@
> > pinctrl-names = "default";
> > pinctrl-0 = <&qup_uart1_default>;
> > interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -426,6 +462,14 @@
> > interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>,
> > + <&aggre1_noc MASTER_QUP_0
> > + &mc_virt SLAVE_EBI1>;
> > + interconnect-names = "qup-core", "qup-config",
> > + "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -437,6 +481,11 @@
> > pinctrl-names = "default";
> > pinctrl-0 = <&qup_uart2_default>;
> > interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -450,6 +499,14 @@
> > interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>,
> > + <&aggre1_noc MASTER_QUP_0
> > + &mc_virt SLAVE_EBI1>;
> > + interconnect-names = "qup-core", "qup-config",
> > + "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -463,6 +520,11 @@
> > interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -474,6 +536,11 @@
> > pinctrl-names = "default";
> > pinctrl-0 = <&qup_uart3_default>;
> > interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -487,6 +554,14 @@
> > interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>,
> > + <&aggre1_noc MASTER_QUP_0
> > + &mc_virt SLAVE_EBI1>;
> > + interconnect-names = "qup-core", "qup-config",
> > + "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -498,6 +573,11 @@
> > pinctrl-names = "default";
> > pinctrl-0 = <&qup_uart4_default>;
> > interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -511,6 +591,14 @@
> > interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>,
> > + <&aggre1_noc MASTER_QUP_0
> > + &mc_virt SLAVE_EBI1>;
> > + interconnect-names = "qup-core", "qup-config",
> > + "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -524,6 +612,11 @@
> > interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -535,6 +628,11 @@
> > pinctrl-names = "default";
> > pinctrl-0 = <&qup_uart5_default>;
> > interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_0
> > + &qup_virt SLAVE_QUP_CORE_0>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_0>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> > };
> > @@ -561,6 +659,14 @@
> > interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>,
> > + <&aggre2_noc MASTER_QUP_1
> > + &mc_virt SLAVE_EBI1>;
> > + interconnect-names = "qup-core", "qup-config",
> > + "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -574,6 +680,11 @@
> > interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -585,6 +696,11 @@
> > pinctrl-names = "default";
> > pinctrl-0 = <&qup_uart6_default>;
> > interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -598,6 +714,14 @@
> > interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>,
> > + <&aggre2_noc MASTER_QUP_1
> > + &mc_virt SLAVE_EBI1>;
> > + interconnect-names = "qup-core", "qup-config",
> > + "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -609,6 +733,11 @@
> > pinctrl-names = "default";
> > pinctrl-0 = <&qup_uart7_default>;
> > interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -622,6 +751,14 @@
> > interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>,
> > + <&aggre2_noc MASTER_QUP_1
> > + &mc_virt SLAVE_EBI1>;
> > + interconnect-names = "qup-core", "qup-config",
> > + "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -635,6 +772,11 @@
> > interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -646,6 +788,11 @@
> > pinctrl-names = "default";
> > pinctrl-0 = <&qup_uart8_default>;
> > interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -659,6 +806,14 @@
> > interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>,
> > + <&aggre2_noc MASTER_QUP_1
> > + &mc_virt SLAVE_EBI1>;
> > + interconnect-names = "qup-core", "qup-config",
> > + "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -670,6 +825,11 @@
> > pinctrl-names = "default";
> > pinctrl-0 = <&qup_uart9_default>;
> > interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -683,6 +843,14 @@
> > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>,
> > + <&aggre2_noc MASTER_QUP_1
> > + &mc_virt SLAVE_EBI1>;
> > + interconnect-names = "qup-core", "qup-config",
> > + "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -696,6 +864,11 @@
> > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -707,6 +880,11 @@
> > pinctrl-names = "default";
> > pinctrl-0 = <&qup_uart10_default>;
> > interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -720,6 +898,14 @@
> > interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>,
> > + <&aggre2_noc MASTER_QUP_1
> > + &mc_virt SLAVE_EBI1>;
> > + interconnect-names = "qup-core", "qup-config",
> > + "qup-memory";
> > status = "disabled";
> > };
> >
> > @@ -733,6 +919,11 @@
> > interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> >
> > @@ -744,6 +935,11 @@
> > pinctrl-names = "default";
> > pinctrl-0 = <&qup_uart11_default>;
> > interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> > + interconnects = <&qup_virt MASTER_QUP_CORE_1
> > + &qup_virt SLAVE_QUP_CORE_1>,
> > + <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QUP_1>;
> > + interconnect-names = "qup-core", "qup-config";
> > status = "disabled";
> > };
> > };
> > @@ -1051,6 +1247,9 @@
> > clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
> > <&gcc GCC_QSPI_CORE_CLK>;
> > clock-names = "iface", "core";
> > + interconnects = <&gem_noc MASTER_APPSS_PROC
> > + &config_noc SLAVE_QSPI_0>;
> > + interconnect-names = "qspi-config";
> > status = "disabled";
> > };
> >
> > --
> > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
prev parent reply other threads:[~2020-02-27 17:03 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-17 13:29 [PATCH 0/6] Add interconnect support to UART, I2C, SPI and QSPI Akash Asthana
[not found] ` <1581946205-27189-1-git-send-email-akashast-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2020-02-17 13:30 ` [PATCH 1/6] soc: qcom: geni: Support for ICC voting Akash Asthana
2020-02-18 3:03 ` Bjorn Andersson
2020-02-19 13:25 ` Akash Asthana
2020-02-17 13:30 ` [PATCH 2/6] tty: serial: qcom_geni_serial: Add interconnect support Akash Asthana
2020-02-17 16:00 ` Greg KH
[not found] ` <1581946205-27189-3-git-send-email-akashast-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2020-02-18 3:15 ` Bjorn Andersson
2020-02-19 13:28 ` Akash Asthana
2020-02-18 22:34 ` Matthias Kaehlcke
2020-02-19 13:31 ` Akash Asthana
2020-02-17 13:30 ` [PATCH 3/6] i2c: i2c-qcom-geni: " Akash Asthana
[not found] ` <1581946205-27189-4-git-send-email-akashast-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2020-02-18 22:47 ` Matthias Kaehlcke
2020-02-19 13:47 ` Akash Asthana
2020-02-21 0:24 ` Matthias Kaehlcke
2020-03-09 17:59 ` [PATCH 0/6] Add interconnect support to UART, I2C, SPI and QSPI Matthias Kaehlcke
2020-03-11 13:02 ` Akash Asthana
2020-02-17 13:30 ` [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support Akash Asthana
[not found] ` <1581946205-27189-5-git-send-email-akashast-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2020-02-17 16:31 ` Mark Brown
2020-02-19 18:09 ` Matthias Kaehlcke
[not found] ` <20200219180950.GA24720-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
2020-02-21 18:55 ` Matthias Kaehlcke
2020-02-17 13:30 ` [PATCH 5/6] spi: spi-qcom-qspi: " Akash Asthana
2020-02-17 16:35 ` Mark Brown
2020-02-17 13:30 ` [PATCH 6/6] arm64: dts: sc7180: Add interconnect for QUP and QSPI Akash Asthana
2020-02-18 3:18 ` Bjorn Andersson
2020-02-19 13:49 ` Akash Asthana
[not found] ` <1581946205-27189-7-git-send-email-akashast-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2020-02-27 12:11 ` Amit Kucheria
2020-02-27 17:03 ` Matthias Kaehlcke [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200227170329.GI24720@google.com \
--to=mka@chromium.org \
--cc=agross@kernel.org \
--cc=akashast@codeaurora.org \
--cc=amit.kucheria@verdurent.com \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mgautam@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=swboyd@chromium.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).