linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH AUTOSEL 6.7 14/26] spi: omap2-mcspi: Revert FIFO support without DMA
       [not found] <20240229154851.2849367-1-sashal@kernel.org>
@ 2024-02-29 15:48 ` Sasha Levin
  2024-02-29 15:48 ` [PATCH AUTOSEL 6.7 15/26] spi: intel-pci: Add support for Lunar Lake-M SPI serial flash Sasha Levin
  1 sibling, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2024-02-29 15:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Vaishnav Achath, Mark Brown, Sasha Levin, linux-spi

From: Vaishnav Achath <vaishnav.a@ti.com>

[ Upstream commit e56c671c2272d939d48a66be7e73b92b74c560c2 ]

MCSPI controller have few limitations regarding the transaction
size when the FIFO buffer is enabled and the WCNT feature is used
to find the end of word, in this case if WCNT is not a multiple of
the FIFO Almost Empty Level (AEL), then the FIFO empty event is not
generated correctly. In addition to this limitation, few other unknown
sequence of events that causes the FIFO empty status to not reflect the
exact status were found when FIFO is being used without DMA enabled
during extended testing in AM65x platform. Till the exact root cause
is found and fixed, revert the FIFO support without DMA.

See J721E Technical Reference Manual (SPRUI1C), section 12.1.5
for further details: http://www.ti.com/lit/pdf/spruil1

This reverts commit 75223bbea840e ("spi: omap2-mcspi: Add FIFO support
without DMA")

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://msgid.link/r/20240212120049.438495-1-vaishnav.a@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-omap2-mcspi.c | 137 ++--------------------------------
 1 file changed, 8 insertions(+), 129 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index a0c9fea908f55..ddf1c684bcc7d 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -53,8 +53,6 @@
 
 /* per-register bitmasks: */
 #define OMAP2_MCSPI_IRQSTATUS_EOW	BIT(17)
-#define OMAP2_MCSPI_IRQSTATUS_TX0_EMPTY    BIT(0)
-#define OMAP2_MCSPI_IRQSTATUS_RX0_FULL    BIT(2)
 
 #define OMAP2_MCSPI_MODULCTRL_SINGLE	BIT(0)
 #define OMAP2_MCSPI_MODULCTRL_MS	BIT(2)
@@ -293,7 +291,7 @@ static void omap2_mcspi_set_mode(struct spi_controller *ctlr)
 }
 
 static void omap2_mcspi_set_fifo(const struct spi_device *spi,
-				struct spi_transfer *t, int enable, int dma_enabled)
+				struct spi_transfer *t, int enable)
 {
 	struct spi_controller *ctlr = spi->controller;
 	struct omap2_mcspi_cs *cs = spi->controller_state;
@@ -314,28 +312,20 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
 			max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH / 2;
 		else
 			max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH;
-		if (dma_enabled)
-			wcnt = t->len / bytes_per_word;
-		else
-			wcnt = 0;
+
+		wcnt = t->len / bytes_per_word;
 		if (wcnt > OMAP2_MCSPI_MAX_FIFOWCNT)
 			goto disable_fifo;
 
 		xferlevel = wcnt << 16;
 		if (t->rx_buf != NULL) {
 			chconf |= OMAP2_MCSPI_CHCONF_FFER;
-			if (dma_enabled)
-				xferlevel |= (bytes_per_word - 1) << 8;
-			else
-				xferlevel |= (max_fifo_depth - 1) << 8;
+			xferlevel |= (bytes_per_word - 1) << 8;
 		}
 
 		if (t->tx_buf != NULL) {
 			chconf |= OMAP2_MCSPI_CHCONF_FFET;
-			if (dma_enabled)
-				xferlevel |= bytes_per_word - 1;
-			else
-				xferlevel |= (max_fifo_depth - 1);
+			xferlevel |= bytes_per_word - 1;
 		}
 
 		mcspi_write_reg(ctlr, OMAP2_MCSPI_XFERLEVEL, xferlevel);
@@ -892,113 +882,6 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
 	return count - c;
 }
 
-static unsigned
-omap2_mcspi_txrx_piofifo(struct spi_device *spi, struct spi_transfer *xfer)
-{
-	struct omap2_mcspi_cs	*cs = spi->controller_state;
-	struct omap2_mcspi    *mcspi;
-	unsigned int		count, c;
-	unsigned int		iter, cwc;
-	int last_request;
-	void __iomem		*base = cs->base;
-	void __iomem		*tx_reg;
-	void __iomem		*rx_reg;
-	void __iomem		*chstat_reg;
-	void __iomem        *irqstat_reg;
-	int			word_len, bytes_per_word;
-	u8		*rx;
-	const u8	*tx;
-
-	mcspi = spi_controller_get_devdata(spi->controller);
-	count = xfer->len;
-	c = count;
-	word_len = cs->word_len;
-	bytes_per_word = mcspi_bytes_per_word(word_len);
-
-	/*
-	 * We store the pre-calculated register addresses on stack to speed
-	 * up the transfer loop.
-	 */
-	tx_reg		= base + OMAP2_MCSPI_TX0;
-	rx_reg		= base + OMAP2_MCSPI_RX0;
-	chstat_reg	= base + OMAP2_MCSPI_CHSTAT0;
-	irqstat_reg    = base + OMAP2_MCSPI_IRQSTATUS;
-
-	if (c < (word_len >> 3))
-		return 0;
-
-	rx = xfer->rx_buf;
-	tx = xfer->tx_buf;
-
-	do {
-		/* calculate number of words in current iteration */
-		cwc = min((unsigned int)mcspi->fifo_depth / bytes_per_word,
-			  c / bytes_per_word);
-		last_request = cwc != (mcspi->fifo_depth / bytes_per_word);
-		if (tx) {
-			if (mcspi_wait_for_reg_bit(irqstat_reg,
-						   OMAP2_MCSPI_IRQSTATUS_TX0_EMPTY) < 0) {
-				dev_err(&spi->dev, "TX Empty timed out\n");
-				goto out;
-			}
-			writel_relaxed(OMAP2_MCSPI_IRQSTATUS_TX0_EMPTY, irqstat_reg);
-
-			for (iter = 0; iter < cwc; iter++, tx += bytes_per_word) {
-				if (bytes_per_word == 1)
-					writel_relaxed(*tx, tx_reg);
-				else if (bytes_per_word == 2)
-					writel_relaxed(*((u16 *)tx), tx_reg);
-				else if (bytes_per_word == 4)
-					writel_relaxed(*((u32 *)tx), tx_reg);
-			}
-		}
-
-		if (rx) {
-			if (!last_request &&
-			    mcspi_wait_for_reg_bit(irqstat_reg,
-						   OMAP2_MCSPI_IRQSTATUS_RX0_FULL) < 0) {
-				dev_err(&spi->dev, "RX_FULL timed out\n");
-				goto out;
-			}
-			writel_relaxed(OMAP2_MCSPI_IRQSTATUS_RX0_FULL, irqstat_reg);
-
-			for (iter = 0; iter < cwc; iter++, rx += bytes_per_word) {
-				if (last_request &&
-				    mcspi_wait_for_reg_bit(chstat_reg,
-							   OMAP2_MCSPI_CHSTAT_RXS) < 0) {
-					dev_err(&spi->dev, "RXS timed out\n");
-					goto out;
-				}
-				if (bytes_per_word == 1)
-					*rx = readl_relaxed(rx_reg);
-				else if (bytes_per_word == 2)
-					*((u16 *)rx) = readl_relaxed(rx_reg);
-				else if (bytes_per_word == 4)
-					*((u32 *)rx) = readl_relaxed(rx_reg);
-			}
-		}
-
-		if (last_request) {
-			if (mcspi_wait_for_reg_bit(chstat_reg,
-						   OMAP2_MCSPI_CHSTAT_EOT) < 0) {
-				dev_err(&spi->dev, "EOT timed out\n");
-				goto out;
-			}
-			if (mcspi_wait_for_reg_bit(chstat_reg,
-						   OMAP2_MCSPI_CHSTAT_TXFFE) < 0) {
-				dev_err(&spi->dev, "TXFFE timed out\n");
-				goto out;
-			}
-			omap2_mcspi_set_enable(spi, 0);
-		}
-		c -= cwc * bytes_per_word;
-	} while (c >= bytes_per_word);
-
-out:
-	omap2_mcspi_set_enable(spi, 1);
-	return count - c;
-}
-
 static u32 omap2_mcspi_calc_divisor(u32 speed_hz, u32 ref_clk_hz)
 {
 	u32 div;
@@ -1323,9 +1206,7 @@ static int omap2_mcspi_transfer_one(struct spi_controller *ctlr,
 		if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
 		    ctlr->cur_msg_mapped &&
 		    ctlr->can_dma(ctlr, spi, t))
-			omap2_mcspi_set_fifo(spi, t, 1, 1);
-		else if (t->len > OMAP2_MCSPI_MAX_FIFODEPTH)
-			omap2_mcspi_set_fifo(spi, t, 1, 0);
+			omap2_mcspi_set_fifo(spi, t, 1);
 
 		omap2_mcspi_set_enable(spi, 1);
 
@@ -1338,8 +1219,6 @@ static int omap2_mcspi_transfer_one(struct spi_controller *ctlr,
 		    ctlr->cur_msg_mapped &&
 		    ctlr->can_dma(ctlr, spi, t))
 			count = omap2_mcspi_txrx_dma(spi, t);
-		else if (mcspi->fifo_depth > 0)
-			count = omap2_mcspi_txrx_piofifo(spi, t);
 		else
 			count = omap2_mcspi_txrx_pio(spi, t);
 
@@ -1352,7 +1231,7 @@ static int omap2_mcspi_transfer_one(struct spi_controller *ctlr,
 	omap2_mcspi_set_enable(spi, 0);
 
 	if (mcspi->fifo_depth > 0)
-		omap2_mcspi_set_fifo(spi, t, 0, 0);
+		omap2_mcspi_set_fifo(spi, t, 0);
 
 out:
 	/* Restore defaults if they were overriden */
@@ -1375,7 +1254,7 @@ static int omap2_mcspi_transfer_one(struct spi_controller *ctlr,
 		omap2_mcspi_set_cs(spi, !(spi->mode & SPI_CS_HIGH));
 
 	if (mcspi->fifo_depth > 0 && t)
-		omap2_mcspi_set_fifo(spi, t, 0, 0);
+		omap2_mcspi_set_fifo(spi, t, 0);
 
 	return status;
 }
-- 
2.43.0


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* [PATCH AUTOSEL 6.7 15/26] spi: intel-pci: Add support for Lunar Lake-M SPI serial flash
       [not found] <20240229154851.2849367-1-sashal@kernel.org>
  2024-02-29 15:48 ` [PATCH AUTOSEL 6.7 14/26] spi: omap2-mcspi: Revert FIFO support without DMA Sasha Levin
@ 2024-02-29 15:48 ` Sasha Levin
  1 sibling, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2024-02-29 15:48 UTC (permalink / raw)
  To: linux-kernel, stable; +Cc: Mika Westerberg, Mark Brown, Sasha Levin, linux-spi

From: Mika Westerberg <mika.westerberg@linux.intel.com>

[ Upstream commit 8f44e3808200c1434c26ef459722f88f48b306df ]

Add Intel Lunar Lake-M PCI ID to the driver list of supported devices.
This is the same controller found in previous generations.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://msgid.link/r/20240212082027.2462849-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-intel-pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-intel-pci.c b/drivers/spi/spi-intel-pci.c
index b9918dcc38027..fef9271b04d07 100644
--- a/drivers/spi/spi-intel-pci.c
+++ b/drivers/spi/spi-intel-pci.c
@@ -84,6 +84,7 @@ static const struct pci_device_id intel_spi_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0xa2a4), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0xa324), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0xa3a4), (unsigned long)&cnl_info },
+	{ PCI_VDEVICE(INTEL, 0xa823), (unsigned long)&cnl_info },
 	{ },
 };
 MODULE_DEVICE_TABLE(pci, intel_spi_pci_ids);
-- 
2.43.0


^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2024-02-29 15:49 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20240229154851.2849367-1-sashal@kernel.org>
2024-02-29 15:48 ` [PATCH AUTOSEL 6.7 14/26] spi: omap2-mcspi: Revert FIFO support without DMA Sasha Levin
2024-02-29 15:48 ` [PATCH AUTOSEL 6.7 15/26] spi: intel-pci: Add support for Lunar Lake-M SPI serial flash Sasha Levin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).