[PATCH AUTOSEL 6.4 04/26] spi: s3c64xx: change polling mode to optional

[PATCH AUTOSEL 6.4 04/26] spi: s3c64xx: change polling mode to optional

[Sasha Levin]

From: Jaewon Kim <jaewon02.kim@samsung.com>

[ Upstream commit d1a7718ee8dbcc488d3243d52e19c755123e0024 ]

Previously, Polling mode was supported as quirk for SOC without DMA.
To provide more flexible support for polling mode, it changed to polling
mode when the 'dmas' property is not present in the devicetree, rather than
using a quirk.

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Link: https://lore.kernel.org/r/20230502062813.112434-2-jaewon02.kim@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-s3c64xx.c                 | 4 ++--
 include/linux/platform_data/spi-s3c64xx.h | 1 +
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 7ac17f0d18a95..5f59d6f8c8d8f 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -19,7 +19,6 @@
 #include <linux/platform_data/spi-s3c64xx.h>
 
 #define MAX_SPI_PORTS		12
-#define S3C64XX_SPI_QUIRK_POLL		(1 << 0)
 #define S3C64XX_SPI_QUIRK_CS_AUTO	(1 << 1)
 #define AUTOSUSPEND_TIMEOUT	2000
 
@@ -116,7 +115,7 @@
 #define S3C64XX_SPI_TRAILCNT		S3C64XX_SPI_MAX_TRAILCNT
 
 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
-#define is_polling(x)	(x->port_conf->quirks & S3C64XX_SPI_QUIRK_POLL)
+#define is_polling(x)	(x->cntrlr_info->polling)
 
 #define RXBUSY    (1<<2)
 #define TXBUSY    (1<<3)
@@ -1068,6 +1067,7 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
 	}
 
 	sci->no_cs = of_property_read_bool(dev->of_node, "no-cs-readback");
+	sci->polling = !of_property_present(dev->of_node, "dmas");
 
 	return sci;
 }
diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h
index 3101152ce449f..1d6e6c424fc69 100644
--- a/include/linux/platform_data/spi-s3c64xx.h
+++ b/include/linux/platform_data/spi-s3c64xx.h
@@ -36,6 +36,7 @@ struct s3c64xx_spi_info {
 	int src_clk_nr;
 	int num_cs;
 	bool no_cs;
+	bool polling;
 	int (*cfg_gpio)(void);
 };
 
-- 
2.39.2

[PATCH AUTOSEL 6.4 06/26] spi: cadence-quadspi: Add compatible for AMD Pensando Elba SoC

[Sasha Levin]

From: Brad Larson <blarson@amd.com>

[ Upstream commit f5c2f9f9584353bc816d76a65c97dd03dc61678c ]

The AMD Pensando Elba SoC has the Cadence QSPI controller integrated.

The quirk CQSPI_NEEDS_APB_AHB_HAZARD_WAR is added and if enabled
a dummy readback from the controller is performed to ensure
synchronization.

Signed-off-by: Brad Larson <blarson@amd.com
Link: https://lore.kernel.org/r/20230515181606.65953-8-blarson@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-cadence-quadspi.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 32449bef4415a..abf10f92415dc 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -40,6 +40,7 @@
 #define CQSPI_SUPPORT_EXTERNAL_DMA	BIT(2)
 #define CQSPI_NO_SUPPORT_WR_COMPLETION	BIT(3)
 #define CQSPI_SLOW_SRAM		BIT(4)
+#define CQSPI_NEEDS_APB_AHB_HAZARD_WAR	BIT(5)
 
 /* Capabilities */
 #define CQSPI_SUPPORTS_OCTAL		BIT(0)
@@ -90,6 +91,7 @@ struct cqspi_st {
 	u32			pd_dev_id;
 	bool			wr_completion;
 	bool			slow_sram;
+	bool			apb_ahb_hazard;
 };
 
 struct cqspi_driver_platdata {
@@ -1027,6 +1029,13 @@ static int cqspi_indirect_write_execute(struct cqspi_flash_pdata *f_pdata,
 	if (cqspi->wr_delay)
 		ndelay(cqspi->wr_delay);
 
+	/*
+	 * If a hazard exists between the APB and AHB interfaces, perform a
+	 * dummy readback from the controller to ensure synchronization.
+	 */
+	if (cqspi->apb_ahb_hazard)
+		readl(reg_base + CQSPI_REG_INDIRECTWR);
+
 	while (remaining > 0) {
 		size_t write_words, mod_bytes;
 
@@ -1754,6 +1763,8 @@ static int cqspi_probe(struct platform_device *pdev)
 			cqspi->wr_completion = false;
 		if (ddata->quirks & CQSPI_SLOW_SRAM)
 			cqspi->slow_sram = true;
+		if (ddata->quirks & CQSPI_NEEDS_APB_AHB_HAZARD_WAR)
+			cqspi->apb_ahb_hazard = true;
 
 		if (of_device_is_compatible(pdev->dev.of_node,
 					    "xlnx,versal-ospi-1.0")) {
@@ -1888,6 +1899,10 @@ static const struct cqspi_driver_platdata jh7110_qspi = {
 	.quirks = CQSPI_DISABLE_DAC_MODE,
 };
 
+static const struct cqspi_driver_platdata pensando_cdns_qspi = {
+	.quirks = CQSPI_NEEDS_APB_AHB_HAZARD_WAR | CQSPI_DISABLE_DAC_MODE,
+};
+
 static const struct of_device_id cqspi_dt_ids[] = {
 	{
 		.compatible = "cdns,qspi-nor",
@@ -1917,6 +1932,10 @@ static const struct of_device_id cqspi_dt_ids[] = {
 		.compatible = "starfive,jh7110-qspi",
 		.data = &jh7110_qspi,
 	},
+	{
+		.compatible = "amd,pensando-elba-qspi",
+		.data = &pensando_cdns_qspi,
+	},
 	{ /* end of table */ }
 };
 
-- 
2.39.2

[PATCH AUTOSEL 6.4 14/26] spi: dw: Add compatible for Intel Mount Evans SoC

[Sasha Levin]

From: Abe Kohandel <abe.kohandel@intel.com>

[ Upstream commit 0760d5d0e9f0c0e2200a0323a61d1995bb745dee ]

The Intel Mount Evans SoC's Integrated Management Complex uses the SPI
controller for access to a NOR SPI FLASH. However, the SoC doesn't
provide a mechanism to override the native chip select signal.

This driver doesn't use DMA for memory operations when a chip select
override is not provided due to the native chip select timing behavior.
As a result no DMA configuration is done for the controller and this
configuration is not tested.

The controller also has an errata where a full TX FIFO can result in
data corruption. The suggested workaround is to never completely fill
the FIFO. The TX FIFO has a size of 32 so the fifo_len is set to 31.

Signed-off-by: Abe Kohandel <abe.kohandel@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230606145402.474866-2-abe.kohandel@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw-mmio.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index 15f5e9cb54ad4..5a38cb09a650d 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -236,6 +236,31 @@ static int dw_spi_intel_init(struct platform_device *pdev,
 	return 0;
 }
 
+/*
+ * The Intel Mount Evans SoC's Integrated Management Complex uses the
+ * SPI controller for access to a NOR SPI FLASH. However, the SoC doesn't
+ * provide a mechanism to override the native chip select signal.
+ *
+ * This driver doesn't use DMA for memory operations when a chip select
+ * override is not provided due to the native chip select timing behavior.
+ * As a result no DMA configuration is done for the controller and this
+ * configuration is not tested.
+ */
+static int dw_spi_mountevans_imc_init(struct platform_device *pdev,
+				      struct dw_spi_mmio *dwsmmio)
+{
+	/*
+	 * The Intel Mount Evans SoC's Integrated Management Complex DW
+	 * apb_ssi_v4.02a controller has an errata where a full TX FIFO can
+	 * result in data corruption. The suggested workaround is to never
+	 * completely fill the FIFO. The TX FIFO has a size of 32 so the
+	 * fifo_len is set to 31.
+	 */
+	dwsmmio->dws.fifo_len = 31;
+
+	return 0;
+}
+
 static int dw_spi_canaan_k210_init(struct platform_device *pdev,
 				   struct dw_spi_mmio *dwsmmio)
 {
@@ -405,6 +430,10 @@ static const struct of_device_id dw_spi_mmio_of_match[] = {
 	{ .compatible = "snps,dwc-ssi-1.01a", .data = dw_spi_hssi_init},
 	{ .compatible = "intel,keembay-ssi", .data = dw_spi_intel_init},
 	{ .compatible = "intel,thunderbay-ssi", .data = dw_spi_intel_init},
+	{
+		.compatible = "intel,mountevans-imc-ssi",
+		.data = dw_spi_mountevans_imc_init,
+	},
 	{ .compatible = "microchip,sparx5-spi", dw_spi_mscc_sparx5_init},
 	{ .compatible = "canaan,k210-spi", dw_spi_canaan_k210_init},
 	{ .compatible = "amd,pensando-elba-spi", .data = dw_spi_elba_init},
-- 
2.39.2

Re: [PATCH AUTOSEL 6.4 04/26] spi: s3c64xx: change polling mode to optional

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 487 bytes --]

On Sun, Jul 09, 2023 at 11:12:33AM -0400, Sasha Levin wrote:
> From: Jaewon Kim <jaewon02.kim@samsung.com>
> 
> [ Upstream commit d1a7718ee8dbcc488d3243d52e19c755123e0024 ]
> 
> Previously, Polling mode was supported as quirk for SOC without DMA.
> To provide more flexible support for polling mode, it changed to polling
> mode when the 'dmas' property is not present in the devicetree, rather than
> using a quirk.

This is a new feature/performance improvement, not a fix.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH AUTOSEL 6.4 04/26] spi: s3c64xx: change polling mode to optional

[Sasha Levin]

On Sun, Jul 09, 2023 at 10:14:04PM +0100, Mark Brown wrote:
>On Sun, Jul 09, 2023 at 11:12:33AM -0400, Sasha Levin wrote:
>> From: Jaewon Kim <jaewon02.kim@samsung.com>
>>
>> [ Upstream commit d1a7718ee8dbcc488d3243d52e19c755123e0024 ]
>>
>> Previously, Polling mode was supported as quirk for SOC without DMA.
>> To provide more flexible support for polling mode, it changed to polling
>> mode when the 'dmas' property is not present in the devicetree, rather than
>> using a quirk.
>
>This is a new feature/performance improvement, not a fix.

Dropped, thanks!

-- 
Thanks,
Sasha