linux-tegra.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Sameer Pujar <spujar@nvidia.com>,
	Peter Geis <pgwipeout@gmail.com>,
	Nicolas Chauvet <kwizart@gmail.com>,
	Takashi Iwai <tiwai@suse.com>, Jaroslav Kysela <perex@perex.cz>
Cc: alsa-devel@alsa-project.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1 5/5] ASoC: tegra: ahub: Reset hardware properly
Date: Tue, 12 Jan 2021 15:58:34 +0300	[thread overview]
Message-ID: <20210112125834.21545-6-digetx@gmail.com> (raw)
In-Reply-To: <20210112125834.21545-1-digetx@gmail.com>

Assert hardware reset before clocks are enabled and then de-assert it
after clocks are enabled. This brings hardware into a predictable state
and removes relying on implicit de-assertion of resets which is done by
the clk driver.

Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 sound/soc/tegra/tegra30_ahub.c | 33 ++++++++++++++++-----------------
 sound/soc/tegra/tegra30_ahub.h |  1 +
 2 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/sound/soc/tegra/tegra30_ahub.c b/sound/soc/tegra/tegra30_ahub.c
index 4dbb58f7ea36..246cf6a373a1 100644
--- a/sound/soc/tegra/tegra30_ahub.c
+++ b/sound/soc/tegra/tegra30_ahub.c
@@ -65,10 +65,20 @@ static int tegra30_ahub_runtime_resume(struct device *dev)
 {
 	int ret;
 
+	ret = reset_control_assert(ahub->reset);
+	if (ret)
+		return ret;
+
 	ret = clk_bulk_prepare_enable(ahub->nclocks, ahub->clocks);
 	if (ret)
 		return ret;
 
+	ret = reset_control_reset(ahub->reset);
+	if (ret) {
+		clk_bulk_disable_unprepare(ahub->nclocks, ahub->clocks);
+		return ret;
+	}
+
 	regcache_cache_only(ahub->regmap_apbif, false);
 	regcache_cache_only(ahub->regmap_ahub, false);
 
@@ -462,7 +472,6 @@ static int tegra30_ahub_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *match;
 	const struct tegra30_ahub_soc_data *soc_data;
-	struct reset_control *rst;
 	struct resource *res0;
 	void __iomem *regs_apbif, *regs_ahub;
 	int ret = 0;
@@ -475,22 +484,6 @@ static int tegra30_ahub_probe(struct platform_device *pdev)
 		return -EINVAL;
 	soc_data = match->data;
 
-	/*
-	 * The AHUB hosts a register bus: the "configlink". For this to
-	 * operate correctly, all devices on this bus must be out of reset.
-	 * Ensure that here.
-	 */
-	rst = of_reset_control_array_get_exclusive(pdev->dev.of_node);
-	if (IS_ERR(rst)) {
-		dev_err(&pdev->dev, "Can't get reset: %p\n", rst);
-		return PTR_ERR(rst);
-	}
-
-	ret = reset_control_deassert(rst);
-	reset_control_put(rst);
-	if (ret)
-		return ret;
-
 	ahub = devm_kzalloc(&pdev->dev, sizeof(struct tegra30_ahub),
 			    GFP_KERNEL);
 	if (!ahub)
@@ -507,6 +500,12 @@ static int tegra30_ahub_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ahub->reset = devm_reset_control_array_get_exclusive(&pdev->dev);
+	if (IS_ERR(ahub->reset)) {
+		dev_err(&pdev->dev, "Can't get reset: %p\n", ahub->reset);
+		return PTR_ERR(ahub->reset);
+	}
+
 	res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	regs_apbif = devm_ioremap_resource(&pdev->dev, res0);
 	if (IS_ERR(regs_apbif))
diff --git a/sound/soc/tegra/tegra30_ahub.h b/sound/soc/tegra/tegra30_ahub.h
index 063aed5037d7..ceb056575e98 100644
--- a/sound/soc/tegra/tegra30_ahub.h
+++ b/sound/soc/tegra/tegra30_ahub.h
@@ -510,6 +510,7 @@ struct tegra30_ahub_soc_data {
 struct tegra30_ahub {
 	const struct tegra30_ahub_soc_data *soc_data;
 	struct device *dev;
+	struct reset_control *reset;
 	struct clk_bulk_data clocks[2];
 	unsigned int nclocks;
 	resource_size_t apbif_addr;
-- 
2.29.2


  parent reply	other threads:[~2021-01-12 13:01 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-12 12:58 [PATCH v1 0/5] Clock and reset improvements for Tegra ALSA drivers Dmitry Osipenko
2021-01-12 12:58 ` [PATCH v1 1/5] ALSA: hda/tegra: Use clk_bulk helpers Dmitry Osipenko
2021-01-15 15:22   ` Thierry Reding
2021-01-17 23:31     ` Dmitry Osipenko
2021-01-19 17:31       ` Thierry Reding
2021-01-12 12:58 ` [PATCH v1 2/5] ALSA: hda/tegra: Reset hardware Dmitry Osipenko
2021-01-15 15:35   ` Thierry Reding
2021-01-17 23:39     ` Dmitry Osipenko
2021-01-19 17:30       ` Thierry Reding
2021-01-12 12:58 ` [PATCH v1 3/5] ASoC: tegra: ahub: Use of_reset_control_array_get_exclusive() Dmitry Osipenko
2021-01-15 15:37   ` Thierry Reding
2021-01-17 23:57     ` Dmitry Osipenko
2021-01-12 12:58 ` [PATCH v1 4/5] ASoC: tegra: ahub: Use clk_bulk helpers Dmitry Osipenko
2021-01-15 15:38   ` Thierry Reding
2021-01-12 12:58 ` Dmitry Osipenko [this message]
2021-01-15 13:02   ` [PATCH v1 5/5] ASoC: tegra: ahub: Reset hardware properly Dmitry Osipenko
2021-01-15 15:44   ` Thierry Reding
2021-01-18  0:02     ` Dmitry Osipenko
2021-01-19 17:34       ` Thierry Reding
2021-01-15 10:18 ` [PATCH v1 0/5] Clock and reset improvements for Tegra ALSA drivers Takashi Iwai
2021-01-15 10:52 ` Ben Dooks
2021-01-15 12:59   ` Dmitry Osipenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210112125834.21545-6-digetx@gmail.com \
    --to=digetx@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=jonathanh@nvidia.com \
    --cc=kwizart@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=pgwipeout@gmail.com \
    --cc=spujar@nvidia.com \
    --cc=thierry.reding@gmail.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).