* Re: [PATCH] trace-cmd: Fix lib audit warning message
2021-01-14 6:44 [PATCH] trace-cmd: Fix lib audit warning message Sameeruddin shaik
@ 2021-01-14 2:04 ` Steven Rostedt
0 siblings, 0 replies; 6+ messages in thread
From: Steven Rostedt @ 2021-01-14 2:04 UTC (permalink / raw)
To: Sameeruddin shaik; +Cc: linux-trace-devel
On Thu, 14 Jan 2021 12:14:48 +0530
Sameeruddin shaik <sameeruddin.shaik8@gmail.com> wrote:
Thanks Sameer!
Just FYI, this isn't that important for this patch, but just to inform
you about basic procedures (we follow the Linux kernel method). When
sending a second version of the patch, add a "v2" to the subject. That
is, "[PATCH v2] trace-cmd: Fix lib audit warning message". Then below
the Signed-off-by (after the "---") add a section of "Changes since
v1:" that gives a brief list of changes that were made in the new
version. But again, not a big deal for this one, but something to be
aware of for future patches :)
Anyway, I did a preliminary test, and it looks like you this applies
without issue. I'll add it tomorrow. Thanks!
-- Steve
> statically updated the warning message which we will get, when
> compiling trace-cmd without the libaudit library.
>
> Following are the the messages which will pop out when compiling
>
> Before:
> -------
> trace-profile.c:23:3: warning: #warning "lib audit not found, using raw syscalls " "(install libaudit-devel and try again)"
>
> After:
> -------
> trace-profile.c:23:3: warning: #warning "lib audit not found, using raw syscalls " "(install libaudit-devel(for fedora) or libaudit-dev(for debian/ubuntu) and try again)"
>
> Signed-off-by: Sameeruddin shaik <sameeruddin.shaik8@gmail.com>
> ---
> tracecmd/trace-profile.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/tracecmd/trace-profile.c b/tracecmd/trace-profile.c
> index cfae2a2..9b5c385 100644
> --- a/tracecmd/trace-profile.c
> +++ b/tracecmd/trace-profile.c
> @@ -21,7 +21,7 @@
>
> #ifdef WARN_NO_AUDIT
> # warning "lib audit not found, using raw syscalls " \
> - "(install libaudit-devel and try again)"
> + "(install libaudit-devel(for fedora) or libaudit-dev(for debian/ubuntu) and try again)"
> #endif
>
> #define TASK_STATE_TO_CHAR_STR "RSDTtXZxKWP"
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] trace-cmd: Fix lib audit warning message
@ 2021-01-14 6:44 Sameeruddin shaik
2021-01-14 2:04 ` Steven Rostedt
0 siblings, 1 reply; 6+ messages in thread
From: Sameeruddin shaik @ 2021-01-14 6:44 UTC (permalink / raw)
To: linux-trace-devel; +Cc: Sameeruddin shaik
statically updated the warning message which we will get, when
compiling trace-cmd without the libaudit library.
Following are the the messages which will pop out when compiling
Before:
-------
trace-profile.c:23:3: warning: #warning "lib audit not found, using raw syscalls " "(install libaudit-devel and try again)"
After:
-------
trace-profile.c:23:3: warning: #warning "lib audit not found, using raw syscalls " "(install libaudit-devel(for fedora) or libaudit-dev(for debian/ubuntu) and try again)"
Signed-off-by: Sameeruddin shaik <sameeruddin.shaik8@gmail.com>
---
tracecmd/trace-profile.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tracecmd/trace-profile.c b/tracecmd/trace-profile.c
index cfae2a2..9b5c385 100644
--- a/tracecmd/trace-profile.c
+++ b/tracecmd/trace-profile.c
@@ -21,7 +21,7 @@
#ifdef WARN_NO_AUDIT
# warning "lib audit not found, using raw syscalls " \
- "(install libaudit-devel and try again)"
+ "(install libaudit-devel(for fedora) or libaudit-dev(for debian/ubuntu) and try again)"
#endif
#define TASK_STATE_TO_CHAR_STR "RSDTtXZxKWP"
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] trace-cmd: Fix lib audit warning message
2021-01-12 17:29 ` Steven Rostedt
@ 2021-01-13 16:10 ` sameeruddin shaik
2021-01-13 14:38 ` Steven Rostedt
0 siblings, 1 reply; 6+ messages in thread
From: sameeruddin shaik @ 2021-01-13 16:10 UTC (permalink / raw)
To: Steven Rostedt; +Cc: linux-trace-devel
hi steve,
please check now.
statically updated the warning message which we will get, when
compiling trace-cmd without the libaudit library.
Following are the the messages which will pop out when compiling
Before:
-------
trace-profile.c:23:3: warning: #warning "lib audit not found, using raw
syscalls " "(install libaudit-devel and try again)"
After:
-------
trace-profile.c:23:3: warning: #warning "lib audit not found, using raw
syscalls " "(install libaudit-devel(for fedora) or libaudit-dev(for
debian/ubuntu) and try again)"
Signed-off-by: Sameeruddin shaik <sameeruddin.shaik8@gmail.com>
---
tracecmd/trace-profile.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tracecmd/trace-profile.c b/tracecmd/trace-profile.c
index cfae2a2..9b5c385 100644
--- a/tracecmd/trace-profile.c
+++ b/tracecmd/trace-profile.c
@@ -21,7 +21,7 @@
#ifdef WARN_NO_AUDIT
# warning "lib audit not found, using raw syscalls " \
- "(install libaudit-devel and try again)"
+ "(install libaudit-devel(for fedora) or libaudit-dev(for
debian/ubuntu) and try again)"
#endif
#define TASK_STATE_TO_CHAR_STR "RSDTtXZxKWP"
--
Thanks,
sameer.
On 12/01/21 10:59 pm, Steven Rostedt wrote:
> On Tue, 12 Jan 2021 13:01:20 +0530
> Sameeruddin Shaik <sameeruddin.shaik8@gmail.com> wrote:
>
> Hi Sameer,
>
>> statically updated the warning message which we will get, when
>> compiling trace-cmd without the libaudit library.
>>
>> Following are the the messages which will pop out when compiling
>>
>> Before:
>> -------
>> trace-profile.c:23:3: warning: #warning "lib audit not found, using
>> raw syscalls " "(install libaudit-devel and try again)"
>>
>> After:
>> -------
>> trace-profile.c:23:3: warning: #warning "lib audit not found, using
>> raw syscalls " "(install libaudit-devel(for fedora) or
>> libaudit-dev(for debian/ubuntu) and try again)"
>>
>> Signed-off-by: Sameeruddin shaik <sameeruddin.shaik8@gmail.com>
>> ---
>> tracecmd/trace-profile.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/tracecmd/trace-profile.c b/tracecmd/trace-profile.c
>> index cfae2a2..4e5d68d 100644
>> --- a/tracecmd/trace-profile.c
>> +++ b/tracecmd/trace-profile.c
>> @@ -21,7 +21,8 @@
>>
>> #ifdef WARN_NO_AUDIT
>> # warning "lib audit not found, using raw syscalls " \
> Your mail client turned tabs into spaces and this doesn't apply properly.
> Are you able to fix that?
>
>> - "(install libaudit-devel and try again)"
>> + "(install libaudit-devel(for fedora) or libaudit-dev(for \
>> +debian/ubuntu) and try again)"
> Also, the above can stay on one line. Yes, it breaks the 80 char limit, but
> that's more of a guideline and not a requirement ;-)
>
>
> Care to send a v2?
>
> Thanks!
>
> -- Steve
>
>> #endif
>>
>> #define TASK_STATE_TO_CHAR_STR "RSDTtXZxKWP"
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] trace-cmd: Fix lib audit warning message
2021-01-13 16:10 ` sameeruddin shaik
@ 2021-01-13 14:38 ` Steven Rostedt
0 siblings, 0 replies; 6+ messages in thread
From: Steven Rostedt @ 2021-01-13 14:38 UTC (permalink / raw)
To: sameeruddin shaik; +Cc: linux-trace-devel
On Wed, 13 Jan 2021 21:40:45 +0530
sameeruddin shaik <sameeruddin.shaik8@gmail.com> wrote:
> hi steve,
>
> please check now.
>
No, unfortunately its still corrupted. Can you try sending with git?
https://coderwall.com/p/qcsiew/setting-up-and-using-git-send-email-with-gmail
-- Steve
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] trace-cmd: Fix lib audit warning message
2021-01-12 7:31 Sameeruddin Shaik
@ 2021-01-12 17:29 ` Steven Rostedt
2021-01-13 16:10 ` sameeruddin shaik
0 siblings, 1 reply; 6+ messages in thread
From: Steven Rostedt @ 2021-01-12 17:29 UTC (permalink / raw)
To: Sameeruddin Shaik; +Cc: linux-trace-devel
On Tue, 12 Jan 2021 13:01:20 +0530
Sameeruddin Shaik <sameeruddin.shaik8@gmail.com> wrote:
Hi Sameer,
> statically updated the warning message which we will get, when
> compiling trace-cmd without the libaudit library.
>
> Following are the the messages which will pop out when compiling
>
> Before:
> -------
> trace-profile.c:23:3: warning: #warning "lib audit not found, using
> raw syscalls " "(install libaudit-devel and try again)"
>
> After:
> -------
> trace-profile.c:23:3: warning: #warning "lib audit not found, using
> raw syscalls " "(install libaudit-devel(for fedora) or
> libaudit-dev(for debian/ubuntu) and try again)"
>
> Signed-off-by: Sameeruddin shaik <sameeruddin.shaik8@gmail.com>
> ---
> tracecmd/trace-profile.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/tracecmd/trace-profile.c b/tracecmd/trace-profile.c
> index cfae2a2..4e5d68d 100644
> --- a/tracecmd/trace-profile.c
> +++ b/tracecmd/trace-profile.c
> @@ -21,7 +21,8 @@
>
> #ifdef WARN_NO_AUDIT
> # warning "lib audit not found, using raw syscalls " \
Your mail client turned tabs into spaces and this doesn't apply properly.
Are you able to fix that?
> - "(install libaudit-devel and try again)"
> + "(install libaudit-devel(for fedora) or libaudit-dev(for \
> +debian/ubuntu) and try again)"
Also, the above can stay on one line. Yes, it breaks the 80 char limit, but
that's more of a guideline and not a requirement ;-)
Care to send a v2?
Thanks!
-- Steve
> #endif
>
> #define TASK_STATE_TO_CHAR_STR "RSDTtXZxKWP"
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] trace-cmd: Fix lib audit warning message
@ 2021-01-12 7:31 Sameeruddin Shaik
2021-01-12 17:29 ` Steven Rostedt
0 siblings, 1 reply; 6+ messages in thread
From: Sameeruddin Shaik @ 2021-01-12 7:31 UTC (permalink / raw)
To: linux-trace-devel
statically updated the warning message which we will get, when
compiling trace-cmd without the libaudit library.
Following are the the messages which will pop out when compiling
Before:
-------
trace-profile.c:23:3: warning: #warning "lib audit not found, using
raw syscalls " "(install libaudit-devel and try again)"
After:
-------
trace-profile.c:23:3: warning: #warning "lib audit not found, using
raw syscalls " "(install libaudit-devel(for fedora) or
libaudit-dev(for debian/ubuntu) and try again)"
Signed-off-by: Sameeruddin shaik <sameeruddin.shaik8@gmail.com>
---
tracecmd/trace-profile.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tracecmd/trace-profile.c b/tracecmd/trace-profile.c
index cfae2a2..4e5d68d 100644
--- a/tracecmd/trace-profile.c
+++ b/tracecmd/trace-profile.c
@@ -21,7 +21,8 @@
#ifdef WARN_NO_AUDIT
# warning "lib audit not found, using raw syscalls " \
- "(install libaudit-devel and try again)"
+ "(install libaudit-devel(for fedora) or libaudit-dev(for \
+debian/ubuntu) and try again)"
#endif
#define TASK_STATE_TO_CHAR_STR "RSDTtXZxKWP"
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-01-14 2:05 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-14 6:44 [PATCH] trace-cmd: Fix lib audit warning message Sameeruddin shaik
2021-01-14 2:04 ` Steven Rostedt
-- strict thread matches above, loose matches on Subject: below --
2021-01-12 7:31 Sameeruddin Shaik
2021-01-12 17:29 ` Steven Rostedt
2021-01-13 16:10 ` sameeruddin shaik
2021-01-13 14:38 ` Steven Rostedt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).