linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2] usb: chipidea: imx: enable vbus and id wakeup only for OTG events
@ 2019-09-09  6:41 jun.li
  2019-09-09  7:43 ` Peter Chen
  0 siblings, 1 reply; 2+ messages in thread
From: jun.li @ 2019-09-09  6:41 UTC (permalink / raw)
  To: peter.chen; +Cc: gregkh, jun.li, linux-imx, linux-usb

From: Li Jun <jun.li@nxp.com>

If ID or VBUS is from external block, don't enable its wakeup
because it isn't used at all.

Signed-off-by: Li Jun <jun.li@nxp.com>
---
 drivers/usb/chipidea/ci_hdrc_imx.c |  8 ++++++++
 drivers/usb/chipidea/ci_hdrc_imx.h |  2 ++
 drivers/usb/chipidea/usbmisc_imx.c | 31 +++++++++++++++++++++++--------
 3 files changed, 33 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index e783604..b11d70f 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -433,6 +433,14 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
 		goto err_clk;
 	}
 
+	if (!IS_ERR(pdata.id_extcon.edev) ||
+	    of_property_read_bool(np, "usb-role-switch"))
+		data->usbmisc_data->ext_id = 1;
+
+	if (!IS_ERR(pdata.vbus_extcon.edev) ||
+	    of_property_read_bool(np, "usb-role-switch"))
+		data->usbmisc_data->ext_vbus = 1;
+
 	ret = imx_usbmisc_init_post(data->usbmisc_data);
 	if (ret) {
 		dev_err(dev, "usbmisc post failed, ret=%d\n", ret);
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
index c842e03..de2aac9 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.h
+++ b/drivers/usb/chipidea/ci_hdrc_imx.h
@@ -22,6 +22,8 @@ struct imx_usbmisc_data {
 	unsigned int evdo:1; /* set external vbus divider option */
 	unsigned int ulpi:1; /* connected to an ULPI phy */
 	unsigned int hsic:1; /* HSIC controlller */
+	unsigned int ext_id:1; /* ID from exteranl event */
+	unsigned int ext_vbus:1; /* Vbus from exteranl event */
 };
 
 int imx_usbmisc_init(struct imx_usbmisc_data *data);
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 078c1fd..e81e33c 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -100,6 +100,9 @@
 #define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID	MX7D_USB_VBUS_WAKEUP_SOURCE(2)
 #define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END	MX7D_USB_VBUS_WAKEUP_SOURCE(3)
 
+#define MX6_USB_OTG_WAKEUP_BITS (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | \
+				 MX6_BM_ID_WAKEUP)
+
 struct usbmisc_ops {
 	/* It's called once when probe a usb device */
 	int (*init)(struct imx_usbmisc_data *data);
@@ -330,14 +333,25 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
 	return 0;
 }
 
+static u32 usbmisc_wakeup_setting(struct imx_usbmisc_data *data)
+{
+	u32 wakeup_setting = MX6_USB_OTG_WAKEUP_BITS;
+
+	if (data->ext_id)
+		wakeup_setting &= ~MX6_BM_ID_WAKEUP;
+
+	if (data->ext_vbus)
+		wakeup_setting &= ~MX6_BM_VBUS_WAKEUP;
+
+	return wakeup_setting;
+}
+
 static int usbmisc_imx6q_set_wakeup
 	(struct imx_usbmisc_data *data, bool enabled)
 {
 	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 	unsigned long flags;
 	u32 val;
-	u32 wakeup_setting = (MX6_BM_WAKEUP_ENABLE |
-		MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP);
 	int ret = 0;
 
 	if (data->index > 3)
@@ -346,11 +360,12 @@ static int usbmisc_imx6q_set_wakeup
 	spin_lock_irqsave(&usbmisc->lock, flags);
 	val = readl(usbmisc->base + data->index * 4);
 	if (enabled) {
-		val |= wakeup_setting;
+		val &= ~MX6_USB_OTG_WAKEUP_BITS;
+		val |= usbmisc_wakeup_setting(data);
 	} else {
 		if (val & MX6_BM_WAKEUP_INTR)
 			pr_debug("wakeup int at ci_hdrc.%d\n", data->index);
-		val &= ~wakeup_setting;
+		val &= ~MX6_USB_OTG_WAKEUP_BITS;
 	}
 	writel(val, usbmisc->base + data->index * 4);
 	spin_unlock_irqrestore(&usbmisc->lock, flags);
@@ -547,17 +562,17 @@ static int usbmisc_imx7d_set_wakeup
 	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 	unsigned long flags;
 	u32 val;
-	u32 wakeup_setting = (MX6_BM_WAKEUP_ENABLE |
-		MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP);
 
 	spin_lock_irqsave(&usbmisc->lock, flags);
 	val = readl(usbmisc->base);
 	if (enabled) {
-		writel(val | wakeup_setting, usbmisc->base);
+		val &= ~MX6_USB_OTG_WAKEUP_BITS;
+		val |= usbmisc_wakeup_setting(data);
+		writel(val, usbmisc->base);
 	} else {
 		if (val & MX6_BM_WAKEUP_INTR)
 			dev_dbg(data->dev, "wakeup int\n");
-		writel(val & ~wakeup_setting, usbmisc->base);
+		writel(val & ~MX6_USB_OTG_WAKEUP_BITS, usbmisc->base);
 	}
 	spin_unlock_irqrestore(&usbmisc->lock, flags);
 
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 2+ messages in thread
* Re: [PATCH v2] usb: chipidea: imx: enable vbus and id wakeup only for OTG events
  2019-09-09  6:41 [PATCH v2] usb: chipidea: imx: enable vbus and id wakeup only for OTG events jun.li
@ 2019-09-09  7:43 ` Peter Chen
  0 siblings, 0 replies; 2+ messages in thread
From: Peter Chen @ 2019-09-09  7:43 UTC (permalink / raw)
  To: Jun Li; +Cc: gregkh, dl-linux-imx, linux-usb

On 19-09-09 14:41:41, jun.li@nxp.com wrote:
> From: Li Jun <jun.li@nxp.com>
> 
> If ID or VBUS is from external block, don't enable its wakeup
> because it isn't used at all.
> 
> Signed-off-by: Li Jun <jun.li@nxp.com>
> ---
>  drivers/usb/chipidea/ci_hdrc_imx.c |  8 ++++++++
>  drivers/usb/chipidea/ci_hdrc_imx.h |  2 ++
>  drivers/usb/chipidea/usbmisc_imx.c | 31 +++++++++++++++++++++++--------
>  3 files changed, 33 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index e783604..b11d70f 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -433,6 +433,14 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>  		goto err_clk;
>  	}
>  
> +	if (!IS_ERR(pdata.id_extcon.edev) ||
> +	    of_property_read_bool(np, "usb-role-switch"))
> +		data->usbmisc_data->ext_id = 1;
> +
> +	if (!IS_ERR(pdata.vbus_extcon.edev) ||
> +	    of_property_read_bool(np, "usb-role-switch"))
> +		data->usbmisc_data->ext_vbus = 1;
> +
>  	ret = imx_usbmisc_init_post(data->usbmisc_data);
>  	if (ret) {
>  		dev_err(dev, "usbmisc post failed, ret=%d\n", ret);
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
> index c842e03..de2aac9 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.h
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.h
> @@ -22,6 +22,8 @@ struct imx_usbmisc_data {
>  	unsigned int evdo:1; /* set external vbus divider option */
>  	unsigned int ulpi:1; /* connected to an ULPI phy */
>  	unsigned int hsic:1; /* HSIC controlller */
> +	unsigned int ext_id:1; /* ID from exteranl event */
> +	unsigned int ext_vbus:1; /* Vbus from exteranl event */
>  };
>  
>  int imx_usbmisc_init(struct imx_usbmisc_data *data);
> diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
> index 078c1fd..e81e33c 100644
> --- a/drivers/usb/chipidea/usbmisc_imx.c
> +++ b/drivers/usb/chipidea/usbmisc_imx.c
> @@ -100,6 +100,9 @@
>  #define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID	MX7D_USB_VBUS_WAKEUP_SOURCE(2)
>  #define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END	MX7D_USB_VBUS_WAKEUP_SOURCE(3)
>  
> +#define MX6_USB_OTG_WAKEUP_BITS (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | \
> +				 MX6_BM_ID_WAKEUP)
> +
>  struct usbmisc_ops {
>  	/* It's called once when probe a usb device */
>  	int (*init)(struct imx_usbmisc_data *data);
> @@ -330,14 +333,25 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
>  	return 0;
>  }
>  
> +static u32 usbmisc_wakeup_setting(struct imx_usbmisc_data *data)
> +{
> +	u32 wakeup_setting = MX6_USB_OTG_WAKEUP_BITS;
> +
> +	if (data->ext_id)
> +		wakeup_setting &= ~MX6_BM_ID_WAKEUP;
> +
> +	if (data->ext_vbus)
> +		wakeup_setting &= ~MX6_BM_VBUS_WAKEUP;
> +
> +	return wakeup_setting;
> +}
> +
>  static int usbmisc_imx6q_set_wakeup
>  	(struct imx_usbmisc_data *data, bool enabled)
>  {
>  	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
>  	unsigned long flags;
>  	u32 val;
> -	u32 wakeup_setting = (MX6_BM_WAKEUP_ENABLE |
> -		MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP);
>  	int ret = 0;
>  
>  	if (data->index > 3)
> @@ -346,11 +360,12 @@ static int usbmisc_imx6q_set_wakeup
>  	spin_lock_irqsave(&usbmisc->lock, flags);
>  	val = readl(usbmisc->base + data->index * 4);
>  	if (enabled) {
> -		val |= wakeup_setting;
> +		val &= ~MX6_USB_OTG_WAKEUP_BITS;
> +		val |= usbmisc_wakeup_setting(data);
>  	} else {
>  		if (val & MX6_BM_WAKEUP_INTR)
>  			pr_debug("wakeup int at ci_hdrc.%d\n", data->index);
> -		val &= ~wakeup_setting;
> +		val &= ~MX6_USB_OTG_WAKEUP_BITS;
>  	}
>  	writel(val, usbmisc->base + data->index * 4);
>  	spin_unlock_irqrestore(&usbmisc->lock, flags);
> @@ -547,17 +562,17 @@ static int usbmisc_imx7d_set_wakeup
>  	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
>  	unsigned long flags;
>  	u32 val;
> -	u32 wakeup_setting = (MX6_BM_WAKEUP_ENABLE |
> -		MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP);
>  
>  	spin_lock_irqsave(&usbmisc->lock, flags);
>  	val = readl(usbmisc->base);
>  	if (enabled) {
> -		writel(val | wakeup_setting, usbmisc->base);
> +		val &= ~MX6_USB_OTG_WAKEUP_BITS;
> +		val |= usbmisc_wakeup_setting(data);
> +		writel(val, usbmisc->base);
>  	} else {
>  		if (val & MX6_BM_WAKEUP_INTR)
>  			dev_dbg(data->dev, "wakeup int\n");
> -		writel(val & ~wakeup_setting, usbmisc->base);
> +		writel(val & ~MX6_USB_OTG_WAKEUP_BITS, usbmisc->base);
>  	}
>  	spin_unlock_irqrestore(&usbmisc->lock, flags);
>  
> -- 
> 2.7.4
> 

This patch is ok for me, I will queue it from next -rc1. 

-- 

Thanks,
Peter Chen

^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-09-09  7:43 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-09  6:41 [PATCH v2] usb: chipidea: imx: enable vbus and id wakeup only for OTG events jun.li
2019-09-09  7:43 ` Peter Chen

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).