* [PATCH] dt-bindings: usb: add properties for hard wired devices
@ 2020-09-28 6:39 Chunfeng Yun
2020-09-28 18:12 ` Rob Herring
2020-09-28 18:13 ` Rob Herring
0 siblings, 2 replies; 5+ messages in thread
From: Chunfeng Yun @ 2020-09-28 6:39 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring
Cc: Matthias Brugger, linux-usb, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek, Chunfeng Yun
Add some optional properties which are needed for hard wired devices
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
Documentation/devicetree/bindings/usb/usb-hcd.yaml | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
index 7263b7f2b510..1194a82887e7 100644
--- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@@ -22,6 +22,17 @@ properties:
description:
Name specifier for the USB PHY
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^hub|device@[0-9a-f]+$":
+ type: object
+ description: The hard wired USB devices. See usb/usb-device.txt
+
examples:
- |
usb {
--
2.18.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] dt-bindings: usb: add properties for hard wired devices
2020-09-28 6:39 [PATCH] dt-bindings: usb: add properties for hard wired devices Chunfeng Yun
@ 2020-09-28 18:12 ` Rob Herring
2020-09-29 6:06 ` Chunfeng Yun
2020-09-28 18:13 ` Rob Herring
1 sibling, 1 reply; 5+ messages in thread
From: Rob Herring @ 2020-09-28 18:12 UTC (permalink / raw)
To: Chunfeng Yun
Cc: Greg Kroah-Hartman, Matthias Brugger, linux-usb, devicetree,
linux-kernel, linux-arm-kernel, linux-mediatek
On Mon, Sep 28, 2020 at 02:39:50PM +0800, Chunfeng Yun wrote:
> Add some optional properties which are needed for hard wired devices
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> Documentation/devicetree/bindings/usb/usb-hcd.yaml | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> index 7263b7f2b510..1194a82887e7 100644
> --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> @@ -22,6 +22,17 @@ properties:
> description:
> Name specifier for the USB PHY
>
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> +patternProperties:
> + "^hub|device@[0-9a-f]+$":
Could be any class of device, so '@[0-9a-f]+$'
> + type: object
> + description: The hard wired USB devices. See usb/usb-device.txt
Ideally, we'd convert usb-device.txt to schema and reference it here.
> +
> examples:
> - |
> usb {
> --
> 2.18.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] dt-bindings: usb: add properties for hard wired devices
2020-09-28 6:39 [PATCH] dt-bindings: usb: add properties for hard wired devices Chunfeng Yun
2020-09-28 18:12 ` Rob Herring
@ 2020-09-28 18:13 ` Rob Herring
1 sibling, 0 replies; 5+ messages in thread
From: Rob Herring @ 2020-09-28 18:13 UTC (permalink / raw)
To: Chunfeng Yun
Cc: Matthias Brugger, devicetree, linux-usb, linux-mediatek,
Rob Herring, Greg Kroah-Hartman, linux-arm-kernel, linux-kernel
On Mon, 28 Sep 2020 14:39:50 +0800, Chunfeng Yun wrote:
> Add some optional properties which are needed for hard wired devices
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> Documentation/devicetree/bindings/usb/usb-hcd.yaml | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
My bot found errors running 'make dt_binding_check' on your patch:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dt.yaml: usb@a6f8800: #address-cells:0:0: 1 was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/qcom,dwc3.example.dt.yaml: usb@a6f8800: #size-cells:0:0: 0 was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.example.dt.yaml: usb@ffe09000: #size-cells:0:0: 0 was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.example.dt.yaml: usb-glue@65b00000: #size-cells:0:0: 0 was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.example.dt.yaml: usb-glue@65b00000: #size-cells:0:0: 0 was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/usb-hcd.yaml
See https://patchwork.ozlabs.org/patch/1372394
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] dt-bindings: usb: add properties for hard wired devices
2020-09-28 18:12 ` Rob Herring
@ 2020-09-29 6:06 ` Chunfeng Yun
2020-09-29 13:56 ` Rob Herring
0 siblings, 1 reply; 5+ messages in thread
From: Chunfeng Yun @ 2020-09-29 6:06 UTC (permalink / raw)
To: Rob Herring
Cc: Greg Kroah-Hartman, Matthias Brugger, linux-usb, devicetree,
linux-kernel, linux-arm-kernel, linux-mediatek
On Mon, 2020-09-28 at 13:12 -0500, Rob Herring wrote:
> On Mon, Sep 28, 2020 at 02:39:50PM +0800, Chunfeng Yun wrote:
> > Add some optional properties which are needed for hard wired devices
> >
> > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > ---
> > Documentation/devicetree/bindings/usb/usb-hcd.yaml | 11 +++++++++++
> > 1 file changed, 11 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> > index 7263b7f2b510..1194a82887e7 100644
> > --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> > +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> > @@ -22,6 +22,17 @@ properties:
> > description:
> > Name specifier for the USB PHY
> >
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > +patternProperties:
> > + "^hub|device@[0-9a-f]+$":
>
> Could be any class of device, so '@[0-9a-f]+$'
You mean we will use different standard node name for each usb class?
e.g.
Use 'ethernet@*' for a usb ethernet adapter, and use 'camera@*' for a
usb camera sensor?
>
> > + type: object
> > + description: The hard wired USB devices. See usb/usb-device.txt
>
> Ideally, we'd convert usb-device.txt to schema and reference it here.
Ok, I'll try to do it.
BTW: Does the compatible support pattern? Is there any example I can
refer to?
Thanks
>
> > +
> > examples:
> > - |
> > usb {
> > --
> > 2.18.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] dt-bindings: usb: add properties for hard wired devices
2020-09-29 6:06 ` Chunfeng Yun
@ 2020-09-29 13:56 ` Rob Herring
0 siblings, 0 replies; 5+ messages in thread
From: Rob Herring @ 2020-09-29 13:56 UTC (permalink / raw)
To: Chunfeng Yun
Cc: Greg Kroah-Hartman, Matthias Brugger, Linux USB List, devicetree,
linux-kernel, linux-arm-kernel,
moderated list:ARM/Mediatek SoC support
On Tue, Sep 29, 2020 at 1:09 AM Chunfeng Yun <chunfeng.yun@mediatek.com> wrote:
>
> On Mon, 2020-09-28 at 13:12 -0500, Rob Herring wrote:
> > On Mon, Sep 28, 2020 at 02:39:50PM +0800, Chunfeng Yun wrote:
> > > Add some optional properties which are needed for hard wired devices
> > >
> > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > > ---
> > > Documentation/devicetree/bindings/usb/usb-hcd.yaml | 11 +++++++++++
> > > 1 file changed, 11 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> > > index 7263b7f2b510..1194a82887e7 100644
> > > --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> > > +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> > > @@ -22,6 +22,17 @@ properties:
> > > description:
> > > Name specifier for the USB PHY
> > >
> > > + "#address-cells":
> > > + const: 1
> > > +
> > > + "#size-cells":
> > > + const: 0
> > > +
> > > +patternProperties:
> > > + "^hub|device@[0-9a-f]+$":
> >
> > Could be any class of device, so '@[0-9a-f]+$'
> You mean we will use different standard node name for each usb class?
> e.g.
> Use 'ethernet@*' for a usb ethernet adapter, and use 'camera@*' for a
> usb camera sensor?
Yes.
> > > + type: object
> > > + description: The hard wired USB devices. See usb/usb-device.txt
> >
> > Ideally, we'd convert usb-device.txt to schema and reference it here.
> Ok, I'll try to do it.
>
> BTW: Does the compatible support pattern? Is there any example I can
> refer to?
Yes, use 'pattern' keyword.
Rob
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-09-29 13:56 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-28 6:39 [PATCH] dt-bindings: usb: add properties for hard wired devices Chunfeng Yun
2020-09-28 18:12 ` Rob Herring
2020-09-29 6:06 ` Chunfeng Yun
2020-09-29 13:56 ` Rob Herring
2020-09-28 18:13 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).