Re: [PATCH v2 6/7] arm64: dts: rockchip: add core dtsi for RK3568 SoC

["Heiko Stübner" <heiko@sntech.de>]

Am Dienstag, 27. April 2021, 09:41:40 CEST schrieb Johan Jonker:
> 
> On 4/25/21 11:44 AM, cl@rock-chips.com wrote:
> > From: Liang Chen <cl@rock-chips.com>
> > 
> > RK3568 is a high-performance and low power quad-core application processor
> > designed for personal mobile internet device and AIoT equipments. This patch
> > add basic core dtsi file for it.
> > 
> > We use scmi_clk for cortex-a55 instead of standard ARMCLK, so that
> > kernel/uboot/rtos can change cpu clk with the same code in ATF, and we will
> > enalbe a special high-performacne PLL when high frequency is required. The
> > smci_clk code is in ATF, and clkid for cpu is 0, as below:
> > 
> >     cpu0: cpu@0 {
> >         device_type = "cpu";
> >         compatible = "arm,cortex-a55";
> >         reg = <0x0 0x0>;
> >         clocks = <&scmi_clk 0>;
> >     };
> > 
> > Signed-off-by: Liang Chen <cl@rock-chips.com>
> > ---
> >  .../boot/dts/rockchip/rk3568-pinctrl.dtsi     | 3119 +++++++++++++++++
> >  arch/arm64/boot/dts/rockchip/rk3568.dtsi      |  812 +++++
> >  2 files changed, 3931 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568.dtsi
> > 
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
> > new file mode 100644
> > index 000000000000..94ee3c2c38af
> > --- /dev/null
> 
> [..]
> 
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> > new file mode 100644
> > index 000000000000..66cb50218ca1
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> > @@ -0,0 +1,812 @@
> 
> [..]
> 
> > +
> > +	pmugrf: syscon@fdc20000 {
> 
> > +		compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
> 
> TODO:
> 
> > +		reg = <0x0 0xfdc20000 0x0 0x10000>;
> > +
> > +		reboot_mode: reboot-mode {
> > +			compatible = "syscon-reboot-mode";
> > +			mode-bootloader = <BOOT_BL_DOWNLOAD>;
> > +			mode-fastboot = <BOOT_FASTBOOT>;
> > +			mode-loader = <BOOT_BL_DOWNLOAD>;
> > +			mode-normal = <BOOT_NORMAL>;
> > +			mode-recovery = <BOOT_RECOVERY>;
> > +			offset = <0x200>;
> > +		};
> > +	};
> > +
> > +	grf: syscon@fdc60000 {
> 
> > +		compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
> 
> TODO:
> 
> > +		reg = <0x0 0xfdc60000 0x0 0x10000>;
> > +	};
> > +
> > +	pmucru: clock-controller@fdd00000 {
> > +		compatible = "rockchip,rk3568-pmucru";
> > +		reg = <0x0 0xfdd00000 0x0 0x1000>;
> 
> > +		rockchip,grf = <&grf>;
> > +		rockchip,pmugrf = <&pmugrf>;
> 
> clock-controller@fdd00000: 'rockchip,grf', 'rockchip,pmugrf' do not
> match any of the regexes: 'pinctrl-[0-9]+'
> 
> Currently clk.c has only support for:
> 
> 	ctx->grf = syscon_regmap_lookup_by_phandle(ctx->cru_node,
> 						   "rockchip,grf");
> 
> Manufacturer tree:
> 
> 	ctx->pmugrf = syscon_regmap_lookup_by_phandle(ctx->cru_node,
> 						   "rockchip,pmugrf");
> 		case branch_muxpmugrf:
> 			clk = rockchip_clk_register_muxgrf(list->name,
> 				list->parent_names, list->num_parents,
> 				flags, ctx->pmugrf, list->muxdiv_offset,
> 				list->mux_shift, list->mux_width,
> 				list->mux_flags);
> 			break;
> 
> 
> 	MUXPMUGRF(SCLK_32K_IOE, "clk_32k_ioe", clk_32k_ioe_p,  0,
> 			RK3568_PMU_GRF_SOC_CON0, 0, 1, MFLAGS)

(1) drop the rockchip,pmugrf property please
(2) as I see it, we will only need the rockchip,grf property.

For main clock controller grf points to main grf
For pmu clock controller grf points to pmugrf

Each clock controller has its own associated grf.

I really see no case where main-clk would need to access the pmugrf
same as pmu-clk would should not need to access the main grf, as the
split into main-{clk,grf} + pmu-{clk,grf} is probably a for power-management
reasons to separate different power-areas, the driver should also not
cross this barrier anyway ;-) .

Same as, if a clk uses the pmugrf it is a pmu-based clock, if it uses the
main grf, it should live in the main clock driver.

And as expected the clk_32k_ioe is already defined in the pmuclk
part of the driver ;-)


Heiko


> > +		#clock-cells = <1>;
> > +		#reset-cells = <1>;
> > +	};
> > +
> > +	cru: clock-controller@fdd20000 {
> > +		compatible = "rockchip,rk3568-cru";
> > +		reg = <0x0 0xfdd20000 0x0 0x1000>;
> 
> > +		rockchip,grf = <&grf>;
> 
> clock-controller@fdd20000: 'assigned-clock-parents',
> 'assigned-clock-rates', 'assigned-clocks', 'rockchip,grf' do not match
> any of the regexes:
> 
> Add more properties to rockchip,rk3568-cru.yaml
> 
> > +		#clock-cells = <1>;
> > +		#reset-cells = <1>;
> > +
> > +		assigned-clocks =
> > +			<&pmucru CLK_RTC_32K>, <&pmucru PLL_PPLL>,
> > +			<&pmucru PCLK_PMU>, <&cru PLL_CPLL>,
> > +			<&cru PLL_GPLL>, <&cru ACLK_BUS>,
> > +			<&cru PCLK_BUS>, <&cru ACLK_TOP_HIGH>,
> > +			<&cru ACLK_TOP_LOW>, <&cru HCLK_TOP>,
> > +			<&cru PCLK_TOP>, <&cru ACLK_PERIMID>,
> > +			<&cru HCLK_PERIMID>, <&cru PLL_NPLL>,
> > +			<&cru ACLK_PIPE>, <&cru PCLK_PIPE>,
> > +			<&cru ACLK_VOP>;
> > +		assigned-clock-rates =
> > +			<32768>, <200000000>,
> > +			<100000000>, <1000000000>,
> > +			<1188000000>, <150000000>,
> > +			<100000000>, <500000000>,
> > +			<400000000>, <150000000>,
> > +			<100000000>, <300000000>,
> > +			<150000000>, <1200000000>,
> > +			<400000000>, <100000000>,
> > +			<500000000>;
> > +		assigned-clock-parents =
> > +			<&pmucru CLK_RTC32K_FRAC>;
> > +	};
>