linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Zekun Shen <bruceshenzk@gmail.com>,
	Brendan Dolan-Gavitt <brendandg@nyu.edu>,
	Kalle Valo <kvalo@codeaurora.org>,
	Sasha Levin <sashal@kernel.org>,
	amitkarwar@gmail.com, siva8118@gmail.com, kvalo@kernel.org,
	davem@davemloft.net, kuba@kernel.org,
	linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.4 20/73] rsi: Fix use-after-free in rsi_rx_done_handler()
Date: Mon, 17 Jan 2022 21:43:39 -0500	[thread overview]
Message-ID: <20220118024432.1952028-20-sashal@kernel.org> (raw)
In-Reply-To: <20220118024432.1952028-1-sashal@kernel.org>

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit b07e3c6ebc0c20c772c0f54042e430acec2945c3 ]

When freeing rx_cb->rx_skb, the pointer is not set to NULL,
a later rsi_rx_done_handler call will try to read the freed
address.
This bug will very likley lead to double free, although
detected early as use-after-free bug.

The bug is triggerable with a compromised/malfunctional usb
device. After applying the patch, the same input no longer
triggers the use-after-free.

Attached is the kasan report from fuzzing.

BUG: KASAN: use-after-free in rsi_rx_done_handler+0x354/0x430 [rsi_usb]
Read of size 4 at addr ffff8880188e5930 by task modprobe/231
Call Trace:
 <IRQ>
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
 ? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
 __kasan_report.cold+0x37/0x7c
 ? dma_direct_unmap_page+0x90/0x110
 ? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
 kasan_report+0xe/0x20
 rsi_rx_done_handler+0x354/0x430 [rsi_usb]
 __usb_hcd_giveback_urb+0x1e4/0x380
 usb_giveback_urb_bh+0x241/0x4f0
 ? __usb_hcd_giveback_urb+0x380/0x380
 ? apic_timer_interrupt+0xa/0x20
 tasklet_action_common.isra.0+0x135/0x330
 __do_softirq+0x18c/0x634
 ? handle_irq_event+0xcd/0x157
 ? handle_edge_irq+0x1eb/0x7b0
 irq_exit+0x114/0x140
 do_IRQ+0x91/0x1e0
 common_interrupt+0xf/0xf
 </IRQ>

Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YXxQL/vIiYcZUu/j@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/rsi/rsi_91x_usb.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 68ce3d2bc5357..730d7bf86c40c 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -261,8 +261,12 @@ static void rsi_rx_done_handler(struct urb *urb)
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)rx_cb->data;
 	int status = -EINVAL;
 
+	if (!rx_cb->rx_skb)
+		return;
+
 	if (urb->status) {
 		dev_kfree_skb(rx_cb->rx_skb);
+		rx_cb->rx_skb = NULL;
 		return;
 	}
 
@@ -286,8 +290,10 @@ static void rsi_rx_done_handler(struct urb *urb)
 	if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num, GFP_ATOMIC))
 		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission", __func__);
 
-	if (status)
+	if (status) {
 		dev_kfree_skb(rx_cb->rx_skb);
+		rx_cb->rx_skb = NULL;
+	}
 }
 
 static void rsi_rx_urb_kill(struct rsi_hw *adapter, u8 ep_num)
-- 
2.34.1


  parent reply	other threads:[~2022-01-18  2:52 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20220118024432.1952028-1-sashal@kernel.org>
2022-01-18  2:43 ` [PATCH AUTOSEL 5.4 05/73] ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply Sasha Levin
2022-01-18  2:43 ` [PATCH AUTOSEL 5.4 19/73] mwifiex: Fix skb_over_panic in mwifiex_usb_recv() Sasha Levin
2022-01-18  2:43 ` Sasha Levin [this message]
2022-01-18  2:43 ` [PATCH AUTOSEL 5.4 21/73] rsi: Fix out-of-bounds read in rsi_read_pkt() Sasha Levin
2022-01-18  2:43 ` [PATCH AUTOSEL 5.4 28/73] iwlwifi: mvm: synchronize with FW after multicast commands Sasha Levin
2022-01-18  2:43 ` [PATCH AUTOSEL 5.4 29/73] ath10k: Fix tx hanging Sasha Levin
2022-01-18  2:44 ` [PATCH AUTOSEL 5.4 48/73] ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream Sasha Levin
2022-01-18  2:44 ` [PATCH AUTOSEL 5.4 49/73] iwlwifi: fix leaks/bad data after failed firmware load Sasha Levin
2022-01-18  2:44 ` [PATCH AUTOSEL 5.4 50/73] iwlwifi: remove module loading failure message Sasha Levin
2022-01-18  2:44 ` [PATCH AUTOSEL 5.4 51/73] iwlwifi: mvm: Fix calculation of frame length Sasha Levin
2022-01-18  2:44 ` [PATCH AUTOSEL 5.4 64/73] mac80211: allow non-standard VHT MCS-10/11 Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220118024432.1952028-20-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=amitkarwar@gmail.com \
    --cc=brendandg@nyu.edu \
    --cc=bruceshenzk@gmail.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=kvalo@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=siva8118@gmail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).