linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Ho <davidkwho@gmail.com>
To: Steve deRosier <derosier@gmail.com>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Subject: Re: Linux wireless times out at Google Starbucks location
Date: Tue, 17 Sep 2019 13:25:56 -0700	[thread overview]
Message-ID: <CAKKzd-8aRFtdkK+E4-sXBid9jP_sAr0bGbdLYJ=sjb4iCsTAcw@mail.gmail.com> (raw)
In-Reply-To: <CALLGbRKUZmZzBh9=YpJ+r_ts8aY+HXy159oviihSgqMEofOCRQ@mail.gmail.com>

On Tue, Sep 17, 2019 at 12:07 PM Steve deRosier <derosier@gmail.com> wrote:
>
> I will tell you I did go look and you don't have sufficient and useful
> information for us to help you. We need to know the wifi chipset
> you're using, the drivers involved, what network subsystems you're
> using, the methodology of your connection, and the kernel logs
> themselves would all be helpful.
>

Hi Steve, pls let me know if you need anything else, David.

High level: Google Starbucks Wifi connection, Unencrypted AP (see AP info below)
Connection method: NetworkManager, wpa_applicant (see exerpt from
/var/log/syslog below)
                   (see also iw event -f below)
Linux kernel: 5.0.0-27
Network subsystem: mac80211, cfg80211 (not sure)
Wifi chipset: RTL8822BE 802.11a/b/g/n/ac (see below)
Kernel driver in use: rtw_pci (see below)
Kernel modules: rtwpci, r8822be (see below)
Kernel log: see /var/log/kern.log exerpt below

Problem detail
------------------

I had trouble connecting my Ubuntu 18.04.3 LTS laptop to one specific
Starbucks location in my neighborhood, (Note that it works for 2/3
Starbucks and another public wifi location so this is an outlier;
However, I have been coming to this Starbucks at least 30 times in the
past and it worked 100% for my Windows laptop and Andriod phone, and I
have never seen customers with iPhones/MacBooks complaining, thus it
is being handled routinely by other major OS's)

I have been tracking down this problem for three days and I believe I
have a good handle on what the problem may be.

The event log below shows that after successfully authenticated,
association timed-out after 3 tries (seen in the kernel log in
/var/log/syslog). The next attempt to associate with the AP was denied
because the WTA (my laptop) has been associated according to the AP.
Thus I believe the client timed out before the association response
from the AP reaches the WTA.

I looked over the Linux wireless user's doc, but I didn't find a way
to tweak the configuration to test my hypothesis. Perhaps the wireless
subsystem folks can shed some lights on this problem to help with
this?

davidkwho@mumble15:~$ iw event -f
wlo1 (phy #0): scan started
wlo1 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447
2452 2457 2462 2467 2472 2484 5180 5200 5220 5240 5260 5280 5300 5320
5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785
5805 5825, ""
wlo1 (phy #0): scan started
wlo1 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447
2452 2457 2462 2467 2472 2484 5180 5200 5220 5240 5260 5280 5300 5320
5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785
5805 5825, "Google Starbucks" ""
wlo1: new station 24:de:c6:cb:2a:d8
wlo1 (phy #0): auth 24:de:c6:cb:2a:d8 -> 48:5f:99:bc:ab:b9 status: 0:
Successful [frame: b0 00 3c 00 48 5f 99 bc ab b9 24 de c6 cb 2a d8 24
de c6 cb 2a d8 10 c5 00 00 02 00 00 00]
wlo1: del station 24:de:c6:cb:2a:d8
wlo1 (phy #0): assoc: timed out
wlo1 (phy #0): scan started
wlo1 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447
2452 2457 2462 2467 2472 2484 5180 5200 5220 5240 5260 5280 5300 5320
5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785
5805 5825, "Google Starbucks" ""
wlo1: new station 24:de:c6:cb:2a:d0
wlo1: del station 24:de:c6:cb:2a:d0
wlo1 (phy #0): auth 24:de:c6:cb:2a:d0 -> 48:5f:99:bc:ab:b9 status: 17:
Association denied because AP is unable to handle additional
associated STA [frame: b0 00 3c 00 48 5f 99 bc ab b9 24 de c6 cb 2a d0
24 de c6 cb 2a d0 20 0b 00 00 02 00 11 00]
wlo1 (phy #0): scan started
wlo1 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447
2452 2457 2462 2467 2472 2484 5180 5200 5220 5240 5260 5280 5300 5320
5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785
5805 5825, ""
wlo1 (phy #0): scan started
wlo1 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447
2452 2457 2462 2467 2472 2484 5180 5200 5220 5240 5260 5280 5300 5320
5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785
5805 5825, ""
wlo1 (phy #0): scan started
wlo1 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447
2452 2457 2462 2467 2472 2484 5180 5200 5220 5240 5260 5280 5300 5320
5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785
5805 5825, ""

Wireless AP info
$ iw dev wlo1 scan
BSS 24:de:c6:cb:2a:d8(on wlo1)
TSF: 2927364433352 usec (33d, 21:09:24)
freq: 5765
beacon interval: 100 TUs
capability: ESS SpectrumMgmt ShortSlotTime (0x0501)
signal: -41.00 dBm
last seen: 320 ms ago
Information elements from Probe Response frame:
SSID: Google Starbucks
Supported rates: 6.0* 9.0 12.0* 18.0 24.0* 36.0 48.0 54.0
DS Parameter set: channel 153
Country: US Environment: Indoor/Outdoor
Channels [36 - 64] @ 36 dBm
Channels [100 - 140] @ 30 dBm
Channels [149 - 165] @ 36 dBm
Power constraint: 0 dB
TPC report: TX power: 23 dBm
BSS Load:
* station count: 7
* channel utilisation: 2/255
* available admission capacity: 30937 [*32us]
HT capabilities:
Capabilities: 0x9ce
HT20/HT40
SM Power Save disabled
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 7935 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT RX MCS rate indexes supported: 0-15
HT TX MCS rate indexes are undefined
HT operation:
* primary channel: 153
* secondary channel offset: below
* STA channel width: any
* RIFS: 0
* HT protection: 20 MHz
* non-GF present: 0
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
Extended capabilities:
* BSS Transition
WMM: * Parameter version 1
* u-APSD
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec

davidkwho@mumble15:~$ uname -a
Linux mumble15 5.0.0-27-generic #28~18.04.1-Ubuntu SMP Thu Aug 22
03:00:32 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux

davidkwho@mumble15:~$ sudo lspci -nn -s 02:00.0
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd.
RTL8822BE 802.11a/b/g/n/ac WiFi adapter [10ec:b822]

davidkwho@mumble15:~$ sudo lspci -vv -s 02:00.0
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8822BE
802.11a/b/g/n/ac WiFi adapter
Subsystem: Hewlett-Packard Company Device 831b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at b1000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000  Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10.000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency
L0s <2us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF
Via message/WAKE#
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-,
EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [148 v1] Device Serial Number 00-e0-4c-ff-fe-b8-22-01
Capabilities: [158 v1] Latency Tolerance Reporting
Max snoop latency: 3145728ns
Max no snoop latency: 3145728ns
Capabilities: [160 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- L1_PM_Substates-
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-

L1SubCtl2:
Kernel driver in use: rtw_pci
Kernel modules: rtwpci, r8822be

davidkwho@mumble15:~$ modinfo rtwpci
filename:
/lib/modules/5.0.0-27-generic/kernel/drivers/net/wireless/realtek/rtw88/rtwpci.ko
license:        Dual BSD/GPL
description:    Realtek 802.11ac wireless PCI driver
author:         Realtek Corporation
srcversion:     4B7E47842DAA873E20D1238
alias:          pci:v000010ECd0000C822sv*sd*bc*sc*i*
alias:          pci:v000010ECd0000B822sv*sd*bc*sc*i*
depends:        mac80211,rtw88
retpoline:      Y
intree:         Y
name:           rtwpci
vermagic:       5.0.0-27-generic SMP mod_unload
signat:         PKCS#7
signer:
sig_key:
sig_hashalgo:   md4


davidkwho@mumble15:~$ modinfo r8822be
filename:
/lib/modules/5.0.0-27-generic/kernel/drivers/staging/rtlwifi/r8822be.ko
description:    Realtek 802.11n PCI wireless core
license:        GPL
author:         Larry Finger <Larry.FInger@lwfinger.net>
author:         Realtek WlanFAE <wlanfae@realtek.com>
author:         lizhaoming <chaoming_li@realsil.com.cn>
description:    PCI basic driver for rtlwifi
license:        GPL
author:         Larry Finger <Larry.FInger@lwfinger.net>
author:         Realtek WlanFAE <wlanfae@realtek.com>
author:         lizhaoming <chaoming_li@realsil.com.cn>
firmware:       rtlwifi/rtl8822befw.bin
description:    Realtek 8822BE 802.11n PCI wireless
license:        GPL
author:         Larry Finger <Larry.Finger@lwfinger.net>
author:         Realtek WlanFAE <wlanfae@realtek.com>
description:    Realtek 802.11n PCI wireless core
license:        GPL
author:         Larry Finger <Larry.FInger@lwfinger.net>
author:         Realtek WlanFAE <wlanfae@realtek.com>
description:    Realtek 802.11n PCI wireless core
license:        GPL
author:         Larry Finger <Larry.FInger@lwfinger.net>
author:         Realtek WlanFAE <wlanfae@realtek.com>
srcversion:     486B19E09315807AE50AE2D
alias:          pci:v000010ECd0000B822sv*sd*bc*sc*i*
depends:        mac80211,cfg80211
staging:        Y
retpoline:      Y
intree:         Y
name:           r8822be
vermagic:       5.0.0-27-generic SMP mod_unload
signat:         PKCS#7
signer:
sig_key:
sig_hashalgo:   md4
parm:           debug_level:int
parm:           swenc:Set to 1 for software crypto (default 0)
 (bool)
parm:           ips:Set to 0 to not use link power save (default 1)
 (bool)
parm:           swlps:Set to 1 to use SW control power save (default 0)
 (bool)
parm:           fwlps:Set to 1 to use FW control power save (default 1)
 (bool)
parm:           msi:Set to 1 to use MSI interrupts mode (default 1)
 (bool)
parm:           dma64:Set to 1 to use DMA 64 (default 0)
 (bool)
parm:           aspm:Set to 1 to enable ASPM (default 1)
 (int)
parm:           debug:Set debug level (0-5) (default 0)
parm:           debug_mask:Set debug mask (default 0) (ullong)
parm:           disable_watchdog:Set to 1 to disable the watchdog (default 0)
 (bool)

excerpt from /var/log/kern.log

Sep 17 10:04:10 mumble15 kernel: [ 3027.669072] rtw_pci 0000:02:00.0:
stop vif 48:5f:99:bc:ab:b9 on port 0
Sep 17 10:04:11 mumble15 kernel: [ 3028.363198] rtw_pci 0000:02:00.0:
start vif 48:5f:99:bc:ab:b9 on port 0
Sep 17 10:05:05 mumble15 kernel: [ 3082.392651] wlo1: authenticate
with 24:de:c6:cb:2a:d8
Sep 17 10:05:05 mumble15 kernel: [ 3082.891812] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 1/3)
Sep 17 10:05:05 mumble15 kernel: [ 3082.893326] wlo1: authenticated
Sep 17 10:05:05 mumble15 kernel: [ 3082.895705] wlo1: associate with
24:de:c6:cb:2a:d8 (try 1/3)
Sep 17 10:05:05 mumble15 kernel: [ 3082.999946] wlo1: associate with
24:de:c6:cb:2a:d8 (try 2/3)
Sep 17 10:05:05 mumble15 kernel: [ 3083.108066] wlo1: associate with
24:de:c6:cb:2a:d8 (try 3/3)
Sep 17 10:05:06 mumble15 kernel: [ 3083.212065] wlo1: association with
24:de:c6:cb:2a:d8 timed out
Sep 17 10:05:10 mumble15 kernel: [ 3087.321806] wlo1: authenticate
with 24:de:c6:cb:2a:d8
Sep 17 10:05:10 mumble15 kernel: [ 3087.820063] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 1/3)
Sep 17 10:05:10 mumble15 kernel: [ 3087.923790] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 2/3)
Sep 17 10:05:10 mumble15 kernel: [ 3088.027966] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 3/3)
Sep 17 10:05:10 mumble15 kernel: [ 3088.131991] wlo1: authentication
with 24:de:c6:cb:2a:d8 timed out
Sep 17 10:05:15 mumble15 kernel: [ 3092.637001] wlo1: authenticate
with 24:de:c6:cb:2a:d0
Sep 17 10:05:15 mumble15 kernel: [ 3093.135834] wlo1: send auth to
24:de:c6:cb:2a:d0 (try 1/3)
Sep 17 10:05:15 mumble15 kernel: [ 3093.141686] wlo1:
24:de:c6:cb:2a:d0 denied authentication (status 17)
Sep 17 10:05:20 mumble15 kernel: [ 3097.661509] wlo1: authenticate
with 24:de:c6:cb:2a:d8
Sep 17 10:05:20 mumble15 kernel: [ 3098.159806] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 1/3)
Sep 17 10:05:21 mumble15 kernel: [ 3098.263955] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 2/3)
Sep 17 10:05:21 mumble15 kernel: [ 3098.273381] wlo1: authenticated
Sep 17 10:05:21 mumble15 kernel: [ 3098.279772] wlo1: associate with
24:de:c6:cb:2a:d8 (try 1/3)
Sep 17 10:05:21 mumble15 kernel: [ 3098.384004] wlo1: associate with
24:de:c6:cb:2a:d8 (try 2/3)
Sep 17 10:05:21 mumble15 kernel: [ 3098.496082] wlo1: associate with
24:de:c6:cb:2a:d8 (try 3/3)
Sep 17 10:05:21 mumble15 kernel: [ 3098.604080] wlo1: association with
24:de:c6:cb:2a:d8 timed out
Sep 17 10:05:23 mumble15 kernel: [ 3100.190473] wlo1: authenticate
with 24:de:c6:cb:2a:d0
Sep 17 10:05:23 mumble15 kernel: [ 3100.691844] wlo1: send auth to
24:de:c6:cb:2a:d0 (try 1/3)
Sep 17 10:05:23 mumble15 kernel: [ 3100.694973] wlo1:
24:de:c6:cb:2a:d0 denied authentication (status 17)
Sep 17 10:14:24 mumble15 canonical-livepatch[985]: Client.Check
Sep 17 10:14:24 mumble15 canonical-livepatch[985]: error in livepatch
check state: check-failed
Sep 17 10:14:24 mumble15 canonical-livepatch[985]: Checking with
livepatch service.
Sep 17 10:14:24 mumble15 canonical-livepatch[985]: No payload available.
Sep 17 10:14:24 mumble15 canonical-livepatch[985]: during refresh:
cannot check: cannot send status to server: cannot send request: Put
https://livepatch.canonical.com/api/machine/d34ed7a7967e44fab3d249a4160a5e66:
dial tcp: lookup livepatch.canonical.com: no such host
Sep 17 10:14:54 mumble15 canonical-livepatch[985]: Client.Check
Sep 17 10:14:54 mumble15 canonical-livepatch[985]: error in livepatch
check state: check-failed
Sep 17 10:14:54 mumble15 canonical-livepatch[985]: Checking with
livepatch service.
Sep 17 10:14:54 mumble15 canonical-livepatch[985]: No payload available.
Sep 17 10:14:54 mumble15 canonical-livepatch[985]: during refresh:
cannot check: cannot send status to server: cannot send request: Put
https://livepatch.canonical.com/api/machine/d34ed7a7967e44fab3d249a4160a5e66:
dial tcp: lookup livepatch.canonical.com: no such host
Sep 17 10:27:55 mumble15 kernel: [ 4452.196761] wlo1: authenticate
with 24:de:c6:cb:2a:d8
Sep 17 10:27:55 mumble15 kernel: [ 4452.695694] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 1/3)
Sep 17 10:27:55 mumble15 kernel: [ 4452.696900] wlo1: authenticated
Sep 17 10:27:55 mumble15 kernel: [ 4452.699665] wlo1: associate with
24:de:c6:cb:2a:d8 (try 1/3)
Sep 17 10:27:55 mumble15 kernel: [ 4452.803715] wlo1: associate with
24:de:c6:cb:2a:d8 (try 2/3)
Sep 17 10:27:55 mumble15 kernel: [ 4452.919898] wlo1: associate with
24:de:c6:cb:2a:d8 (try 3/3)
Sep 17 10:27:55 mumble15 kernel: [ 4453.023876] wlo1: association with
24:de:c6:cb:2a:d8 timed out
Sep 17 10:28:09 mumble15 kernel: [ 4467.040008] wlo1: authenticate
with 24:de:c6:cb:2a:d0
Sep 17 10:28:10 mumble15 kernel: [ 4467.539834] wlo1: send auth to
24:de:c6:cb:2a:d0 (try 1/3)
Sep 17 10:28:10 mumble15 kernel: [ 4467.540985] wlo1:
24:de:c6:cb:2a:d0 denied authentication (status 17)

excerpt from /var/log/syslog

Sep 17 09:15:41 mumble15 NetworkManager[893]: <info>
[1568736941.1707] device (wlo1): supplicant interface state: ready ->
scanning
Sep 17 09:15:44 mumble15 wpa_supplicant[892]: wlo1: SME: Trying to
authenticate with 24:de:c6:cb:2a:d8 (SSID='Google Starbucks' freq=5765
MHz)
Sep 17 09:15:44 mumble15 kernel: [  121.844764] wlo1: authenticate
with 24:de:c6:cb:2a:d8
Sep 17 09:15:45 mumble15 kernel: [  122.343740] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 1/3)
Sep 17 09:15:45 mumble15 NetworkManager[893]: <info>
[1568736945.1620] device (wlo1): supplicant interface state: scanning
-> authenticating
Sep 17 09:15:45 mumble15 wpa_supplicant[892]: wlo1: Trying to
associate with 24:de:c6:cb:2a:d8 (SSID='Google Starbucks' freq=5765
MHz)
Sep 17 09:15:45 mumble15 kernel: [  122.344991] wlo1: authenticated
Sep 17 09:15:45 mumble15 kernel: [  122.348006] wlo1: associate with
24:de:c6:cb:2a:d8 (try 1/3)
Sep 17 09:15:45 mumble15 NetworkManager[893]: <info>
[1568736945.1793] device (wlo1): supplicant interface state:
authenticating -> associating
Sep 17 09:15:45 mumble15 kernel: [  122.452300] wlo1: associate with
24:de:c6:cb:2a:d8 (try 2/3)
Sep 17 09:15:45 mumble15 kernel: [  122.556317] wlo1: associate with
24:de:c6:cb:2a:d8 (try 3/3)
Sep 17 09:15:45 mumble15 kernel: [  122.664332] wlo1: association with
24:de:c6:cb:2a:d8 timed out
Sep 17 09:15:45 mumble15 NetworkManager[893]: <info>
[1568736945.5173] device (wlo1): supplicant interface state:
associating -> disconnected
Sep 17 09:15:45 mumble15 dbus-daemon[1671]: [session uid=1000
pid=1671] Activating via systemd: service
name='org.gnome.zeitgeist.Engine' unit='zeitgeist.service' requested
by ':1.72' (uid=1000 pid=2152 comm="zeitgeist-datahub "
label="unconfined")
Sep 17 09:15:45 mumble15 systemd[1645]: Starting Zeitgeist activity
log service...
Sep 17 09:15:45 mumble15 dbus-daemon[1671]: [session uid=1000
pid=1671] Activating via systemd: service
name='org.gnome.zeitgeist.SimpleIndexer' unit='zeitgeist-fts.service'
requested by ':1.73' (uid=1000 pid=2161
comm="/usr/bin/zeitgeist-daemon " label="unconfined")
Sep 17 09:15:45 mumble15 dbus-daemon[1671]: [session uid=1000
pid=1671] Successfully activated service 'org.gnome.zeitgeist.Engine'
Sep 17 09:15:45 mumble15 systemd[1645]: Started Zeitgeist activity log service.
Sep 17 09:15:45 mumble15 systemd[1645]: Starting Zeitgeist full-text
search indexer...
Sep 17 09:15:45 mumble15 zeitgeist-daemon[2161]:
#033[31m[16:15:45.840283 WARNING]#033[0m zeitgeist-daemon.vala:127:
Unable to parse version info!
Sep 17 09:15:45 mumble15 zeitgeist-daemon[2161]:
#033[31m[16:15:45.840478 WARNING]#033[0m zeitgeist-daemon.vala:127:
Unable to parse version info!
Sep 17 09:15:45 mumble15 zeitgeist-daemon[2161]:
#033[31m[16:15:45.851906 WARNING]#033[0m zeitgeist-daemon.vala:127:
Unable to parse version info!
Sep 17 09:15:45 mumble15 zeitgeist-datah[2168]:
zeitgeist-datahub.vala:227: Unable to get name
"org.gnome.zeitgeist.datahub" on the bus!
Sep 17 09:15:45 mumble15 dbus-daemon[1671]: [session uid=1000
pid=1671] Successfully activated service
'org.gnome.zeitgeist.SimpleIndexer'
Sep 17 09:15:45 mumble15 systemd[1645]: Started Zeitgeist full-text
search indexer.
Sep 17 09:15:46 mumble15 NetworkManager[893]: <info>
[1568736946.1109] device (wlo1): supplicant interface state:
disconnected -> scanning
Sep 17 09:15:49 mumble15 wpa_supplicant[892]: nl80211:
send_and_recv->nl_recvmsgs failed: -33
Sep 17 09:15:49 mumble15 wpa_supplicant[892]: wlo1: SME: Trying to
authenticate with 24:de:c6:cb:2a:d8 (SSID='Google Starbucks' freq=5765
MHz)
Sep 17 09:15:49 mumble15 kernel: [  126.781671] wlo1: authenticate
with 24:de:c6:cb:2a:d8
Sep 17 09:15:50 mumble15 NetworkManager[893]: <info>
[1568736950.0994] device (wlo1): supplicant interface state: scanning
-> authenticating
Sep 17 09:15:50 mumble15 kernel: [  127.280174] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 1/3)
Sep 17 09:15:50 mumble15 kernel: [  127.384202] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 2/3)
Sep 17 09:15:50 mumble15 kernel: [  127.488275] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 3/3)
Sep 17 09:15:50 mumble15 kernel: [  127.592303] wlo1: authentication
with 24:de:c6:cb:2a:d8 timed out
Sep 17 09:15:50 mumble15 NetworkManager[893]: <info>
[1568736950.4335] device (wlo1): supplicant interface state:
authenticating -> disconnected
Sep 17 09:15:50 mumble15 dbus-daemon[1671]: [session uid=1000
pid=1671] Activating via systemd: service name='org.gnome.Terminal'
unit='gnome-terminal-server.service' requested by ':1.77' (uid=1000
pid=2199 comm="/usr/bin/gnome-terminal.real " label="unconfined")
Sep 17 09:15:50 mumble15 systemd[1645]: Starting GNOME Terminal Server...
Sep 17 09:15:50 mumble15 dbus-daemon[1671]: [session uid=1000
pid=1671] Successfully activated service 'org.gnome.Terminal'
Sep 17 09:15:50 mumble15 systemd[1645]: Started GNOME Terminal Server.
Sep 17 09:15:51 mumble15 NetworkManager[893]: <info>
[1568736951.4267] device (wlo1): supplicant interface state:
disconnected -> scanning
Sep 17 09:15:54 mumble15 wpa_supplicant[892]: wlo1: SME: Trying to
authenticate with 24:de:c6:cb:2a:d8 (SSID='Google Starbucks' freq=5765
MHz)
Sep 17 09:15:54 mumble15 kernel: [  132.102375] wlo1: authenticate
with 24:de:c6:cb:2a:d8
Sep 17 09:15:55 mumble15 kernel: [  132.599927] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 1/3)
Sep 17 09:15:55 mumble15 NetworkManager[893]: <info>
[1568736955.4232] device (wlo1): supplicant interface state: scanning
-> authenticating
Sep 17 09:15:55 mumble15 kernel: [  132.704246] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 2/3)
Sep 17 09:15:55 mumble15 kernel: [  132.808252] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 3/3)
Sep 17 09:15:55 mumble15 kernel: [  132.912292] wlo1: authentication
with 24:de:c6:cb:2a:d8 timed out
Sep 17 09:15:55 mumble15 NetworkManager[893]: <info>
[1568736955.7536] device (wlo1): supplicant interface state:
authenticating -> disconnected
Sep 17 09:15:57 mumble15 NetworkManager[893]: <info>
[1568736957.2508] device (wlo1): supplicant interface state:
disconnected -> scanning
Sep 17 09:16:00 mumble15 wpa_supplicant[892]: wlo1: SME: Trying to
authenticate with 24:de:c6:cb:2a:d8 (SSID='Google Starbucks' freq=5765
MHz)
Sep 17 09:16:00 mumble15 kernel: [  137.921958] wlo1: authenticate
with 24:de:c6:cb:2a:d8
Sep 17 09:16:01 mumble15 NetworkManager[893]: <info>
[1568736961.2395] device (wlo1): supplicant interface state: scanning
-> authenticating
Sep 17 09:16:01 mumble15 kernel: [  138.420186] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 1/3)
Sep 17 09:16:01 mumble15 kernel: [  138.426618] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 2/3)
Sep 17 09:16:01 mumble15 kernel: [  138.433025] wlo1: send auth to
24:de:c6:cb:2a:d8 (try 3/3)
Sep 17 09:16:01 mumble15 kernel: [  138.439447] wlo1: authentication
with 24:de:c6:cb:2a:d8 timed out
Sep 17 09:16:01 mumble15 wpa_supplicant[892]: wlo1:
CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="Google Starbucks"
auth_failures=1 duration=10 reason=CONN_FAILED
Sep 17 09:16:01 mumble15 NetworkManager[893]: <info>
[1568736961.2927] device (wlo1): supplicant interface state:
authenticating -> disconnected
Sep 17 09:16:03 mumble15 NetworkManager[893]: <warn>
[1568736963.8164] device (wlo1): Activation: (wifi) association took
too long, failing activation
Sep 17 09:16:03 mumble15 NetworkManager[893]: <info>
[1568736963.8165] device (wlo1): state change: config -> failed
(reason 'supplicant-timeout', sys-iface-state: 'managed')
Sep 17 09:16:03 mumble15 NetworkManager[893]: <info>
[1568736963.8172] manager: NetworkManager state is now DISCONNECTED
Sep 17 09:16:03 mumble15 NetworkManager[893]: <warn>
[1568736963.8186] device (wlo1): Activation: failed for connection
'Google Starbucks'
Sep 17 09:16:03 mumble15 NetworkManager[893]: <info>
[1568736963.8202] device (wlo1): state change: failed -> disconnected
(reason 'none', sys-iface-state: 'managed')
Sep 17 09:16:03 mumble15 dbus-daemon[1124]: [session uid=121 pid=1124]
Activating service name='ca.desrt.dconf' requested by ':1.13' (uid=121
pid=1139 comm="/usr/bin/gnome-shell " label="unconfined")
Sep 17 09:16:03 mumble15 dbus-daemon[1124]: [session uid=121 pid=1124]
Successfully activated service 'ca.desrt.dconf'
Sep 17 09:16:03 mumble15 gnome-shell[1824]: An active wireless
connection, in infrastructure mode, involves no access point?
Sep 17 09:16:03 mumble15 gnome-shell[1139]: An active wireless
connection, in infrastructure mode, involves no access point?
Sep 17 09:16:08 mumble15 NetworkManager[893]: <info>
[1568736968.2980] device (wlo1): supplicant interface state:
disconnected -> inactive

  reply	other threads:[~2019-09-17 20:26 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-17 18:53 Linux wireless times out at Google Starbucks location David Ho
2019-09-17 19:07 ` Steve deRosier
2019-09-17 20:25   ` David Ho [this message]
2019-09-17 21:01     ` Dan Williams
2019-09-18  0:03       ` David Ho
2019-09-18  8:14         ` Krishna Chaitanya
2019-09-18 17:11           ` David Ho
2019-09-25 22:01       ` David Ho
     [not found]         ` <CAKKzd--_m8BZhjXkimAzGJ8TFF8-18zV61ykZEnGq_WX9Wrz8Q@mail.gmail.com>
2019-10-10 17:42           ` David Ho
2019-10-10 19:09             ` Krishna Chaitanya
     [not found]               ` <CAKKzd-91BbanxTRQf--EeLBpPvZg-X5kcAx1tohVKJ4sxC=pDg@mail.gmail.com>
2019-10-10 20:20                 ` David Ho

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAKKzd-8aRFtdkK+E4-sXBid9jP_sAr0bGbdLYJ=sjb4iCsTAcw@mail.gmail.com' \
    --to=davidkwho@gmail.com \
    --cc=derosier@gmail.com \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).