linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Michal Suchanek <msuchanek@suse.de>, Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v3 30/32] powerpc/64: system call reconcile interrupts
Date: Wed, 26 Feb 2020 03:35:39 +1000	[thread overview]
Message-ID: <20200225173541.1549955-31-npiggin@gmail.com> (raw)
In-Reply-To: <20200225173541.1549955-1-npiggin@gmail.com>

This reconciles interrupts in the system call case like all other
interrupts. This allows system_call_common to be shared with the
scv system call implementation in a subsequent patch.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/kernel/entry_64.S   | 11 +++++++++++
 arch/powerpc/kernel/syscall_64.c | 28 +++++++++++++---------------
 2 files changed, 24 insertions(+), 15 deletions(-)

diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 6d5464f83c05..8406812c9734 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -113,6 +113,17 @@ END_BTB_FLUSH_SECTION
 	ld	r11,exception_marker@toc(r2)
 	std	r11,-16(r10)		/* "regshere" marker */
 
+	/*
+	 * RECONCILE_IRQ_STATE without calling trace_hardirqs_off(), which
+	 * would clobber syscall parameters. Also we always enter with IRQs
+	 * enabled and nothing pending. system_call_exception() will call
+	 * trace_hardirqs_off().
+	 */
+	li	r11,IRQS_ALL_DISABLED
+	li	r12,PACA_IRQ_HARD_DIS
+	stb	r11,PACAIRQSOFTMASK(r13)
+	stb	r12,PACAIRQHAPPENED(r13)
+
 	/* Calling convention has r9 = orig r0, r10 = regs */
 	mr	r9,r0
 	bl	system_call_exception
diff --git a/arch/powerpc/kernel/syscall_64.c b/arch/powerpc/kernel/syscall_64.c
index 08e0bebbd3b6..32601a572ff0 100644
--- a/arch/powerpc/kernel/syscall_64.c
+++ b/arch/powerpc/kernel/syscall_64.c
@@ -19,13 +19,19 @@ extern void __noreturn tabort_syscall(unsigned long nip, unsigned long msr);
 
 typedef long (*syscall_fn)(long, long, long, long, long, long);
 
-/* Has to run notrace because it is entered "unreconciled" */
-notrace long system_call_exception(long r3, long r4, long r5, long r6, long r7, long r8,
-			   unsigned long r0, struct pt_regs *regs)
+/* Has to run notrace because it is entered not completely "reconciled" */
+notrace long system_call_exception(long r3, long r4, long r5,
+				   long r6, long r7, long r8,
+				   unsigned long r0, struct pt_regs *regs)
 {
 	unsigned long ti_flags;
 	syscall_fn f;
 
+	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
+		BUG_ON(irq_soft_mask_return() != IRQS_ALL_DISABLED);
+
+	trace_hardirqs_off(); /* finish reconciling */
+
 	if (IS_ENABLED(CONFIG_PPC_BOOK3S))
 		BUG_ON(!(regs->msr & MSR_RI));
 	BUG_ON(!(regs->msr & MSR_PR));
@@ -33,8 +39,10 @@ notrace long system_call_exception(long r3, long r4, long r5, long r6, long r7,
 	BUG_ON(regs->softe != IRQS_ENABLED);
 
 	if (IS_ENABLED(CONFIG_PPC_TRANSACTIONAL_MEM) &&
-	    unlikely(regs->msr & MSR_TS_T))
+	    unlikely(regs->msr & MSR_TS_T)) {
+		local_irq_enable();
 		tabort_syscall(regs->nip, regs->msr);
+	}
 
 	account_cpu_user_entry();
 
@@ -50,16 +58,6 @@ notrace long system_call_exception(long r3, long r4, long r5, long r6, long r7,
 
 	kuap_check_amr();
 
-	/*
-	 * A syscall should always be called with interrupts enabled
-	 * so we just unconditionally hard-enable here. When some kind
-	 * of irq tracing is used, we additionally check that condition
-	 * is correct
-	 */
-	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) {
-		WARN_ON(irq_soft_mask_return() != IRQS_ENABLED);
-		WARN_ON(local_paca->irq_happened);
-	}
 	/*
 	 * This is not required for the syscall exit path, but makes the
 	 * stack frame look nicer. If this was initialised in the first stack
@@ -68,7 +66,7 @@ notrace long system_call_exception(long r3, long r4, long r5, long r6, long r7,
 	 */
 	regs->softe = IRQS_ENABLED;
 
-	__hard_irq_enable();
+	local_irq_enable();
 
 	ti_flags = current_thread_info()->flags;
 	if (unlikely(ti_flags & _TIF_SYSCALL_DOTRACE)) {
-- 
2.23.0


  parent reply	other threads:[~2020-02-25 18:57 UTC|newest]

Thread overview: 108+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-25 17:35 [PATCH v3 00/32] powerpc/64: interrupts and syscalls series Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 01/32] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2020-04-01 12:53   ` Michael Ellerman
2020-02-25 17:35 ` [PATCH v3 02/32] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 03/32] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 04/32] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 05/32] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 06/32] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 07/32] powerpc/64s/exception: Remove old INT_COMMON macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 08/32] powerpc/64s/exception: Remove old INT_KVM_HANDLER Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 09/32] powerpc/64s/exception: Add ISIDE option Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 10/32] powerpc/64s/exception: move real->virt switch into the common handler Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 11/32] powerpc/64s/exception: move soft-mask test to common code Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 12/32] powerpc/64s/exception: move KVM " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 13/32] powerpc/64s/exception: remove confusing IEARLY option Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 14/32] powerpc/64s/exception: remove the SPR saving patch code macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 15/32] powerpc/64s/exception: trim unused arguments from KVMTEST macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 16/32] powerpc/64s/exception: hdecrementer avoid touching the stack Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 17/32] powerpc/64s/exception: re-inline some handlers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 18/32] powerpc/64s/exception: Clean up SRR specifiers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 19/32] powerpc/64s/exception: add more comments for interrupt handlers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 20/32] powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is supported Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 21/32] powerpc/64s/exception: sreset interrupts reconcile fix Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 22/32] powerpc/64s/exception: soft nmi interrupt should not use ret_from_except Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 23/32] powerpc/64: system call remove non-volatile GPR save optimisation Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 24/32] powerpc/64: sstep ifdef the deprecated fast endian switch syscall Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 25/32] powerpc/64: system call implement entry/exit logic in C Nicholas Piggin
2020-03-19  9:18   ` Christophe Leroy
2020-03-20  3:39     ` Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 26/32] powerpc/64: system call zero volatile registers when returning Nicholas Piggin
2020-02-25 21:20   ` Segher Boessenkool
2020-02-26  3:39     ` Nicholas Piggin
2020-03-07  0:54     ` [PATCH] Fix " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 27/32] powerpc/64: implement soft interrupt replay in C Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 28/32] powerpc/64s: interrupt implement exit logic " Nicholas Piggin
2021-01-27  8:54   ` Christophe Leroy
2021-01-28  0:09     ` Nicholas Piggin
2021-02-03 16:25   ` Christophe Leroy
2021-02-04  3:27     ` Nicholas Piggin
2021-02-04  8:03       ` Christophe Leroy
2021-02-04  8:53         ` Nicholas Piggin
2021-02-05  0:22           ` Michael Ellerman
2021-02-05  2:16             ` Nicholas Piggin
2021-02-05  6:04               ` Christophe Leroy
2021-02-06  2:28                 ` Nicholas Piggin
2021-02-27 10:07   ` Christophe Leroy
2021-03-01  0:47     ` Nicholas Piggin
2021-03-15 13:41   ` Christophe Leroy
2021-03-16  7:36     ` Nicholas Piggin
2021-03-19 11:44       ` Michael Ellerman
2020-02-25 17:35 ` [PATCH v3 29/32] powerpc/64s/exception: remove lite interrupt return Nicholas Piggin
2020-02-25 17:35 ` Nicholas Piggin [this message]
2020-02-25 17:35 ` [PATCH v3 31/32] powerpc/64s/exception: treat NIA below __end_interrupts as soft-masked Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 32/32] powerpc/64s: system call support for scv/rfscv instructions Nicholas Piggin
2020-03-01 12:20   ` kbuild test robot
2020-03-19 12:19 ` [PATCH v11 0/8] Disable compat cruft on ppc64le v11 Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 1/8] powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 2/8] powerpc: move common register copy functions from signal_32.c to signal.c Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 3/8] powerpc/perf: consolidate read_user_stack_32 Michal Suchanek
2020-03-24  8:48     ` Nicholas Piggin
2020-03-24 19:38       ` Michal Suchánek
2020-04-03  7:13         ` Nicholas Piggin
2020-04-03 10:52           ` Michal Suchánek
2020-04-03 11:26             ` Nicholas Piggin
2020-04-03 11:51               ` Michal Suchánek
2020-04-06 20:52           ` Michal Suchánek
2020-04-06 21:00           ` [PATCH] powerpcs: perf: consolidate perf_callchain_user_64 and perf_callchain_user_32 Michal Suchanek
2020-04-07  5:21             ` Christophe Leroy
2020-04-09 11:22               ` Michal Suchánek
2020-03-19 12:19   ` [PATCH v11 4/8] powerpc/perf: consolidate valid_user_sp Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 5/8] powerpc/64: make buildable without CONFIG_COMPAT Michal Suchanek
2020-03-24  8:54     ` Nicholas Piggin
2020-03-24 19:30       ` Michal Suchánek
2020-04-03  7:16         ` Nicholas Piggin
2020-03-19 12:19   ` [PATCH v11 6/8] powerpc/64: Make COMPAT user-selectable disabled on littleendian by default Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 7/8] powerpc/perf: split callchain.c by bitness Michal Suchanek
2020-03-19 12:19   ` [PATCH v11 8/8] MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry Michal Suchanek
2020-03-19 13:37     ` Andy Shevchenko
2020-03-19 14:00       ` Michal Suchánek
2020-03-19 14:26         ` Andy Shevchenko
2020-03-19 17:03     ` Joe Perches
2020-03-19 12:36   ` [PATCH v11 0/8] Disable compat cruft on ppc64le v11 Christophe Leroy
2020-03-19 14:01     ` Michal Suchánek
2020-04-03  7:25   ` Nicholas Piggin
2020-04-03  7:26     ` Christophe Leroy
2020-04-03  9:43       ` Nicholas Piggin
2020-04-05  0:40         ` Michael Ellerman
2020-03-20 10:20 ` [PATCH v12 0/8] Disable compat cruft on ppc64le v12 Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 1/8] powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro Michal Suchanek
2020-04-06 13:05     ` Michael Ellerman
2020-03-20 10:20   ` [PATCH v12 2/8] powerpc: move common register copy functions from signal_32.c to signal.c Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 3/8] powerpc/perf: consolidate read_user_stack_32 Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 4/8] powerpc/perf: consolidate valid_user_sp -> invalid_user_sp Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 5/8] powerpc/64: make buildable without CONFIG_COMPAT Michal Suchanek
2020-04-07  5:50     ` Christophe Leroy
2020-04-07  9:57       ` Michal Suchánek
2020-03-20 10:20   ` [PATCH v12 6/8] powerpc/64: Make COMPAT user-selectable disabled on littleendian by default Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 7/8] powerpc/perf: split callchain.c by bitness Michal Suchanek
2020-03-20 10:20   ` [PATCH v12 8/8] MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry Michal Suchanek
2020-03-20 10:33     ` Andy Shevchenko
2020-03-20 11:23       ` Michal Suchánek
2020-03-20 12:42         ` Andy Shevchenko
2020-03-20 14:42           ` Joe Perches
2020-03-20 16:28             ` Michal Suchánek
2020-03-20 16:31             ` Andy Shevchenko
2020-03-20 16:42               ` Michal Suchánek
2020-03-20 16:47                 ` Andy Shevchenko
2020-03-20 21:36               ` Joe Perches

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200225173541.1549955-31-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=msuchanek@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).