From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Michal Suchanek <msuchanek@suse.de>, Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v3 04/32] powerpc/64s/exception: Expand EXC_COMMON and EXC_COMMON_ASYNC macros
Date: Wed, 26 Feb 2020 03:35:13 +1000 [thread overview]
Message-ID: <20200225173541.1549955-5-npiggin@gmail.com> (raw)
In-Reply-To: <20200225173541.1549955-1-npiggin@gmail.com>
These don't provide a large amount of code sharing. Removing them
makes code easier to shuffle around. For example, some of the common
instructions will be moved into the common code gen macro.
No generated code change.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
arch/powerpc/kernel/exceptions-64s.S | 160 ++++++++++++++++++++-------
1 file changed, 117 insertions(+), 43 deletions(-)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index da3c22eea72d..0f1da3099c28 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -757,28 +757,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
#define FINISH_NAP
#endif
-#define EXC_COMMON(name, realvec, hdlr) \
- EXC_COMMON_BEGIN(name); \
- INT_COMMON realvec, PACA_EXGEN, 1, 1, 1, 0, 0 ; \
- bl save_nvgprs; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- bl hdlr; \
- b ret_from_except
-
-/*
- * Like EXC_COMMON, but for exceptions that can occur in the idle task and
- * therefore need the special idle handling (finish nap and runlatch)
- */
-#define EXC_COMMON_ASYNC(name, realvec, hdlr) \
- EXC_COMMON_BEGIN(name); \
- INT_COMMON realvec, PACA_EXGEN, 1, 1, 1, 0, 0 ; \
- FINISH_NAP; \
- RUNLATCH_ON; \
- addi r3,r1,STACK_FRAME_OVERHEAD; \
- bl hdlr; \
- b ret_from_except_lite
-
-
/*
* There are a few constraints to be concerned with.
* - Real mode exceptions code/data must be located at their physical location.
@@ -1349,7 +1327,13 @@ EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100)
INT_HANDLER hardware_interrupt, 0x500, virt=1, hsrr=EXC_HV_OR_STD, bitmask=IRQS_DISABLED, kvm=1
EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100)
INT_KVM_HANDLER hardware_interrupt, 0x500, EXC_HV_OR_STD, PACA_EXGEN, 0
-EXC_COMMON_ASYNC(hardware_interrupt_common, 0x500, do_IRQ)
+EXC_COMMON_BEGIN(hardware_interrupt_common)
+ INT_COMMON 0x500, PACA_EXGEN, 1, 1, 1, 0, 0
+ FINISH_NAP
+ RUNLATCH_ON
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl do_IRQ
+ b ret_from_except_lite
EXC_REAL_BEGIN(alignment, 0x600, 0x100)
@@ -1455,7 +1439,13 @@ EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80)
INT_HANDLER decrementer, 0x900, virt=1, bitmask=IRQS_DISABLED
EXC_VIRT_END(decrementer, 0x4900, 0x80)
INT_KVM_HANDLER decrementer, 0x900, EXC_STD, PACA_EXGEN, 0
-EXC_COMMON_ASYNC(decrementer_common, 0x900, timer_interrupt)
+EXC_COMMON_BEGIN(decrementer_common)
+ INT_COMMON 0x900, PACA_EXGEN, 1, 1, 1, 0, 0
+ FINISH_NAP
+ RUNLATCH_ON
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl timer_interrupt
+ b ret_from_except_lite
EXC_REAL_BEGIN(hdecrementer, 0x980, 0x80)
@@ -1465,7 +1455,12 @@ EXC_VIRT_BEGIN(hdecrementer, 0x4980, 0x80)
INT_HANDLER hdecrementer, 0x980, virt=1, hsrr=EXC_HV, kvm=1
EXC_VIRT_END(hdecrementer, 0x4980, 0x80)
INT_KVM_HANDLER hdecrementer, 0x980, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON(hdecrementer_common, 0x980, hdec_interrupt)
+EXC_COMMON_BEGIN(hdecrementer_common)
+ INT_COMMON 0x980, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl hdec_interrupt
+ b ret_from_except
EXC_REAL_BEGIN(doorbell_super, 0xa00, 0x100)
@@ -1475,11 +1470,17 @@ EXC_VIRT_BEGIN(doorbell_super, 0x4a00, 0x100)
INT_HANDLER doorbell_super, 0xa00, virt=1, bitmask=IRQS_DISABLED
EXC_VIRT_END(doorbell_super, 0x4a00, 0x100)
INT_KVM_HANDLER doorbell_super, 0xa00, EXC_STD, PACA_EXGEN, 0
+EXC_COMMON_BEGIN(doorbell_super_common)
+ INT_COMMON 0xa00, PACA_EXGEN, 1, 1, 1, 0, 0
+ FINISH_NAP
+ RUNLATCH_ON
+ addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_DOORBELL
-EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, doorbell_exception)
+ bl doorbell_exception
#else
-EXC_COMMON_ASYNC(doorbell_super_common, 0xa00, unknown_exception)
+ bl unknown_exception
#endif
+ b ret_from_except_lite
EXC_REAL_NONE(0xb00, 0x100)
@@ -1610,7 +1611,12 @@ EXC_VIRT_BEGIN(single_step, 0x4d00, 0x100)
INT_HANDLER single_step, 0xd00, virt=1
EXC_VIRT_END(single_step, 0x4d00, 0x100)
INT_KVM_HANDLER single_step, 0xd00, EXC_STD, PACA_EXGEN, 0
-EXC_COMMON(single_step_common, 0xd00, single_step_exception)
+EXC_COMMON_BEGIN(single_step_common)
+ INT_COMMON 0xd00, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl single_step_exception
+ b ret_from_except
EXC_REAL_BEGIN(h_data_storage, 0xe00, 0x20)
@@ -1641,7 +1647,12 @@ EXC_VIRT_BEGIN(h_instr_storage, 0x4e20, 0x20)
INT_HANDLER h_instr_storage, 0xe20, ool=1, virt=1, hsrr=EXC_HV, kvm=1
EXC_VIRT_END(h_instr_storage, 0x4e20, 0x20)
INT_KVM_HANDLER h_instr_storage, 0xe20, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON(h_instr_storage_common, 0xe20, unknown_exception)
+EXC_COMMON_BEGIN(h_instr_storage_common)
+ INT_COMMON 0xe20, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl unknown_exception
+ b ret_from_except
EXC_REAL_BEGIN(emulation_assist, 0xe40, 0x20)
@@ -1651,7 +1662,12 @@ EXC_VIRT_BEGIN(emulation_assist, 0x4e40, 0x20)
INT_HANDLER emulation_assist, 0xe40, ool=1, virt=1, hsrr=EXC_HV, kvm=1
EXC_VIRT_END(emulation_assist, 0x4e40, 0x20)
INT_KVM_HANDLER emulation_assist, 0xe40, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON(emulation_assist_common, 0xe40, emulation_assist_interrupt)
+EXC_COMMON_BEGIN(emulation_assist_common)
+ INT_COMMON 0xe40, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl emulation_assist_interrupt
+ b ret_from_except
/*
@@ -1708,11 +1724,17 @@ EXC_VIRT_BEGIN(h_doorbell, 0x4e80, 0x20)
INT_HANDLER h_doorbell, 0xe80, ool=1, virt=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1
EXC_VIRT_END(h_doorbell, 0x4e80, 0x20)
INT_KVM_HANDLER h_doorbell, 0xe80, EXC_HV, PACA_EXGEN, 0
+EXC_COMMON_BEGIN(h_doorbell_common)
+ INT_COMMON 0xe80, PACA_EXGEN, 1, 1, 1, 0, 0
+ FINISH_NAP
+ RUNLATCH_ON
+ addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_DOORBELL
-EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, doorbell_exception)
+ bl doorbell_exception
#else
-EXC_COMMON_ASYNC(h_doorbell_common, 0xe80, unknown_exception)
+ bl unknown_exception
#endif
+ b ret_from_except_lite
EXC_REAL_BEGIN(h_virt_irq, 0xea0, 0x20)
@@ -1722,7 +1744,13 @@ EXC_VIRT_BEGIN(h_virt_irq, 0x4ea0, 0x20)
INT_HANDLER h_virt_irq, 0xea0, ool=1, virt=1, hsrr=EXC_HV, bitmask=IRQS_DISABLED, kvm=1
EXC_VIRT_END(h_virt_irq, 0x4ea0, 0x20)
INT_KVM_HANDLER h_virt_irq, 0xea0, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON_ASYNC(h_virt_irq_common, 0xea0, do_IRQ)
+EXC_COMMON_BEGIN(h_virt_irq_common)
+ INT_COMMON 0xea0, PACA_EXGEN, 1, 1, 1, 0, 0
+ FINISH_NAP
+ RUNLATCH_ON
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl do_IRQ
+ b ret_from_except_lite
EXC_REAL_NONE(0xec0, 0x20)
@@ -1738,7 +1766,13 @@ EXC_VIRT_BEGIN(performance_monitor, 0x4f00, 0x20)
INT_HANDLER performance_monitor, 0xf00, ool=1, virt=1, bitmask=IRQS_PMI_DISABLED
EXC_VIRT_END(performance_monitor, 0x4f00, 0x20)
INT_KVM_HANDLER performance_monitor, 0xf00, EXC_STD, PACA_EXGEN, 0
-EXC_COMMON_ASYNC(performance_monitor_common, 0xf00, performance_monitor_exception)
+EXC_COMMON_BEGIN(performance_monitor_common)
+ INT_COMMON 0xf00, PACA_EXGEN, 1, 1, 1, 0, 0
+ FINISH_NAP
+ RUNLATCH_ON
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl performance_monitor_exception
+ b ret_from_except_lite
EXC_REAL_BEGIN(altivec_unavailable, 0xf20, 0x20)
@@ -1829,7 +1863,12 @@ EXC_VIRT_BEGIN(facility_unavailable, 0x4f60, 0x20)
INT_HANDLER facility_unavailable, 0xf60, ool=1, virt=1
EXC_VIRT_END(facility_unavailable, 0x4f60, 0x20)
INT_KVM_HANDLER facility_unavailable, 0xf60, EXC_STD, PACA_EXGEN, 0
-EXC_COMMON(facility_unavailable_common, 0xf60, facility_unavailable_exception)
+EXC_COMMON_BEGIN(facility_unavailable_common)
+ INT_COMMON 0xf60, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl facility_unavailable_exception
+ b ret_from_except
EXC_REAL_BEGIN(h_facility_unavailable, 0xf80, 0x20)
@@ -1839,7 +1878,12 @@ EXC_VIRT_BEGIN(h_facility_unavailable, 0x4f80, 0x20)
INT_HANDLER h_facility_unavailable, 0xf80, ool=1, virt=1, hsrr=EXC_HV, kvm=1
EXC_VIRT_END(h_facility_unavailable, 0x4f80, 0x20)
INT_KVM_HANDLER h_facility_unavailable, 0xf80, EXC_HV, PACA_EXGEN, 0
-EXC_COMMON(h_facility_unavailable_common, 0xf80, facility_unavailable_exception)
+EXC_COMMON_BEGIN(h_facility_unavailable_common)
+ INT_COMMON 0xf80, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl facility_unavailable_exception
+ b ret_from_except
EXC_REAL_NONE(0xfa0, 0x20)
@@ -1860,7 +1904,12 @@ EXC_REAL_BEGIN(cbe_system_error, 0x1200, 0x100)
EXC_REAL_END(cbe_system_error, 0x1200, 0x100)
EXC_VIRT_NONE(0x5200, 0x100)
INT_KVM_HANDLER cbe_system_error, 0x1200, EXC_HV, PACA_EXGEN, 1
-EXC_COMMON(cbe_system_error_common, 0x1200, cbe_system_error_exception)
+EXC_COMMON_BEGIN(cbe_system_error_common)
+ INT_COMMON 0x1200, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl cbe_system_error_exception
+ b ret_from_except
#else /* CONFIG_CBE_RAS */
EXC_REAL_NONE(0x1200, 0x100)
EXC_VIRT_NONE(0x5200, 0x100)
@@ -1874,7 +1923,12 @@ EXC_VIRT_BEGIN(instruction_breakpoint, 0x5300, 0x100)
INT_HANDLER instruction_breakpoint, 0x1300, virt=1
EXC_VIRT_END(instruction_breakpoint, 0x5300, 0x100)
INT_KVM_HANDLER instruction_breakpoint, 0x1300, EXC_STD, PACA_EXGEN, 1
-EXC_COMMON(instruction_breakpoint_common, 0x1300, instruction_breakpoint_exception)
+EXC_COMMON_BEGIN(instruction_breakpoint_common)
+ INT_COMMON 0x1300, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl instruction_breakpoint_exception
+ b ret_from_except
EXC_REAL_NONE(0x1400, 0x100)
@@ -1974,7 +2028,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
b .
#endif
-EXC_COMMON(denorm_common, 0x1500, unknown_exception)
+EXC_COMMON_BEGIN(denorm_common)
+ INT_COMMON 0x1500, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl unknown_exception
+ b ret_from_except
#ifdef CONFIG_CBE_RAS
@@ -1983,7 +2042,12 @@ EXC_REAL_BEGIN(cbe_maintenance, 0x1600, 0x100)
EXC_REAL_END(cbe_maintenance, 0x1600, 0x100)
EXC_VIRT_NONE(0x5600, 0x100)
INT_KVM_HANDLER cbe_maintenance, 0x1600, EXC_HV, PACA_EXGEN, 1
-EXC_COMMON(cbe_maintenance_common, 0x1600, cbe_maintenance_exception)
+EXC_COMMON_BEGIN(cbe_maintenance_common)
+ INT_COMMON 0x1600, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl cbe_maintenance_exception
+ b ret_from_except
#else /* CONFIG_CBE_RAS */
EXC_REAL_NONE(0x1600, 0x100)
EXC_VIRT_NONE(0x5600, 0x100)
@@ -1997,11 +2061,16 @@ EXC_VIRT_BEGIN(altivec_assist, 0x5700, 0x100)
INT_HANDLER altivec_assist, 0x1700, virt=1
EXC_VIRT_END(altivec_assist, 0x5700, 0x100)
INT_KVM_HANDLER altivec_assist, 0x1700, EXC_STD, PACA_EXGEN, 0
+EXC_COMMON_BEGIN(altivec_assist_common)
+ INT_COMMON 0x1700, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_ALTIVEC
-EXC_COMMON(altivec_assist_common, 0x1700, altivec_assist_exception)
+ bl altivec_assist_exception
#else
-EXC_COMMON(altivec_assist_common, 0x1700, unknown_exception)
+ bl unknown_exception
#endif
+ b ret_from_except
#ifdef CONFIG_CBE_RAS
@@ -2010,7 +2079,12 @@ EXC_REAL_BEGIN(cbe_thermal, 0x1800, 0x100)
EXC_REAL_END(cbe_thermal, 0x1800, 0x100)
EXC_VIRT_NONE(0x5800, 0x100)
INT_KVM_HANDLER cbe_thermal, 0x1800, EXC_HV, PACA_EXGEN, 1
-EXC_COMMON(cbe_thermal_common, 0x1800, cbe_thermal_exception)
+EXC_COMMON_BEGIN(cbe_thermal_common)
+ INT_COMMON 0x1800, PACA_EXGEN, 1, 1, 1, 0, 0
+ bl save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl cbe_thermal_exception
+ b ret_from_except
#else /* CONFIG_CBE_RAS */
EXC_REAL_NONE(0x1800, 0x100)
EXC_VIRT_NONE(0x5800, 0x100)
--
2.23.0
next prev parent reply other threads:[~2020-02-25 17:51 UTC|newest]
Thread overview: 108+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-25 17:35 [PATCH v3 00/32] powerpc/64: interrupts and syscalls series Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 01/32] powerpc/64s/exception: Introduce INT_DEFINE parameter block for code generation Nicholas Piggin
2020-04-01 12:53 ` Michael Ellerman
2020-02-25 17:35 ` [PATCH v3 02/32] powerpc/64s/exception: Add GEN_COMMON macro that uses INT_DEFINE parameters Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 03/32] powerpc/64s/exception: Add GEN_KVM " Nicholas Piggin
2020-02-25 17:35 ` Nicholas Piggin [this message]
2020-02-25 17:35 ` [PATCH v3 05/32] powerpc/64s/exception: Move all interrupt handlers to new style code gen macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 06/32] powerpc/64s/exception: Remove old INT_ENTRY macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 07/32] powerpc/64s/exception: Remove old INT_COMMON macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 08/32] powerpc/64s/exception: Remove old INT_KVM_HANDLER Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 09/32] powerpc/64s/exception: Add ISIDE option Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 10/32] powerpc/64s/exception: move real->virt switch into the common handler Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 11/32] powerpc/64s/exception: move soft-mask test to common code Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 12/32] powerpc/64s/exception: move KVM " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 13/32] powerpc/64s/exception: remove confusing IEARLY option Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 14/32] powerpc/64s/exception: remove the SPR saving patch code macros Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 15/32] powerpc/64s/exception: trim unused arguments from KVMTEST macro Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 16/32] powerpc/64s/exception: hdecrementer avoid touching the stack Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 17/32] powerpc/64s/exception: re-inline some handlers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 18/32] powerpc/64s/exception: Clean up SRR specifiers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 19/32] powerpc/64s/exception: add more comments for interrupt handlers Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 20/32] powerpc/64s/exception: only test KVM in SRR interrupts when PR KVM is supported Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 21/32] powerpc/64s/exception: sreset interrupts reconcile fix Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 22/32] powerpc/64s/exception: soft nmi interrupt should not use ret_from_except Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 23/32] powerpc/64: system call remove non-volatile GPR save optimisation Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 24/32] powerpc/64: sstep ifdef the deprecated fast endian switch syscall Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 25/32] powerpc/64: system call implement entry/exit logic in C Nicholas Piggin
2020-03-19 9:18 ` Christophe Leroy
2020-03-20 3:39 ` Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 26/32] powerpc/64: system call zero volatile registers when returning Nicholas Piggin
2020-02-25 21:20 ` Segher Boessenkool
2020-02-26 3:39 ` Nicholas Piggin
2020-03-07 0:54 ` [PATCH] Fix " Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 27/32] powerpc/64: implement soft interrupt replay in C Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 28/32] powerpc/64s: interrupt implement exit logic " Nicholas Piggin
2021-01-27 8:54 ` Christophe Leroy
2021-01-28 0:09 ` Nicholas Piggin
2021-02-03 16:25 ` Christophe Leroy
2021-02-04 3:27 ` Nicholas Piggin
2021-02-04 8:03 ` Christophe Leroy
2021-02-04 8:53 ` Nicholas Piggin
2021-02-05 0:22 ` Michael Ellerman
2021-02-05 2:16 ` Nicholas Piggin
2021-02-05 6:04 ` Christophe Leroy
2021-02-06 2:28 ` Nicholas Piggin
2021-02-27 10:07 ` Christophe Leroy
2021-03-01 0:47 ` Nicholas Piggin
2021-03-15 13:41 ` Christophe Leroy
2021-03-16 7:36 ` Nicholas Piggin
2021-03-19 11:44 ` Michael Ellerman
2020-02-25 17:35 ` [PATCH v3 29/32] powerpc/64s/exception: remove lite interrupt return Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 30/32] powerpc/64: system call reconcile interrupts Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 31/32] powerpc/64s/exception: treat NIA below __end_interrupts as soft-masked Nicholas Piggin
2020-02-25 17:35 ` [PATCH v3 32/32] powerpc/64s: system call support for scv/rfscv instructions Nicholas Piggin
2020-03-01 12:20 ` kbuild test robot
2020-03-19 12:19 ` [PATCH v11 0/8] Disable compat cruft on ppc64le v11 Michal Suchanek
2020-03-19 12:19 ` [PATCH v11 1/8] powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro Michal Suchanek
2020-03-19 12:19 ` [PATCH v11 2/8] powerpc: move common register copy functions from signal_32.c to signal.c Michal Suchanek
2020-03-19 12:19 ` [PATCH v11 3/8] powerpc/perf: consolidate read_user_stack_32 Michal Suchanek
2020-03-24 8:48 ` Nicholas Piggin
2020-03-24 19:38 ` Michal Suchánek
2020-04-03 7:13 ` Nicholas Piggin
2020-04-03 10:52 ` Michal Suchánek
2020-04-03 11:26 ` Nicholas Piggin
2020-04-03 11:51 ` Michal Suchánek
2020-04-06 20:52 ` Michal Suchánek
2020-04-06 21:00 ` [PATCH] powerpcs: perf: consolidate perf_callchain_user_64 and perf_callchain_user_32 Michal Suchanek
2020-04-07 5:21 ` Christophe Leroy
2020-04-09 11:22 ` Michal Suchánek
2020-03-19 12:19 ` [PATCH v11 4/8] powerpc/perf: consolidate valid_user_sp Michal Suchanek
2020-03-19 12:19 ` [PATCH v11 5/8] powerpc/64: make buildable without CONFIG_COMPAT Michal Suchanek
2020-03-24 8:54 ` Nicholas Piggin
2020-03-24 19:30 ` Michal Suchánek
2020-04-03 7:16 ` Nicholas Piggin
2020-03-19 12:19 ` [PATCH v11 6/8] powerpc/64: Make COMPAT user-selectable disabled on littleendian by default Michal Suchanek
2020-03-19 12:19 ` [PATCH v11 7/8] powerpc/perf: split callchain.c by bitness Michal Suchanek
2020-03-19 12:19 ` [PATCH v11 8/8] MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry Michal Suchanek
2020-03-19 13:37 ` Andy Shevchenko
2020-03-19 14:00 ` Michal Suchánek
2020-03-19 14:26 ` Andy Shevchenko
2020-03-19 17:03 ` Joe Perches
2020-03-19 12:36 ` [PATCH v11 0/8] Disable compat cruft on ppc64le v11 Christophe Leroy
2020-03-19 14:01 ` Michal Suchánek
2020-04-03 7:25 ` Nicholas Piggin
2020-04-03 7:26 ` Christophe Leroy
2020-04-03 9:43 ` Nicholas Piggin
2020-04-05 0:40 ` Michael Ellerman
2020-03-20 10:20 ` [PATCH v12 0/8] Disable compat cruft on ppc64le v12 Michal Suchanek
2020-03-20 10:20 ` [PATCH v12 1/8] powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro Michal Suchanek
2020-04-06 13:05 ` Michael Ellerman
2020-03-20 10:20 ` [PATCH v12 2/8] powerpc: move common register copy functions from signal_32.c to signal.c Michal Suchanek
2020-03-20 10:20 ` [PATCH v12 3/8] powerpc/perf: consolidate read_user_stack_32 Michal Suchanek
2020-03-20 10:20 ` [PATCH v12 4/8] powerpc/perf: consolidate valid_user_sp -> invalid_user_sp Michal Suchanek
2020-03-20 10:20 ` [PATCH v12 5/8] powerpc/64: make buildable without CONFIG_COMPAT Michal Suchanek
2020-04-07 5:50 ` Christophe Leroy
2020-04-07 9:57 ` Michal Suchánek
2020-03-20 10:20 ` [PATCH v12 6/8] powerpc/64: Make COMPAT user-selectable disabled on littleendian by default Michal Suchanek
2020-03-20 10:20 ` [PATCH v12 7/8] powerpc/perf: split callchain.c by bitness Michal Suchanek
2020-03-20 10:20 ` [PATCH v12 8/8] MAINTAINERS: perf: Add pattern that matches ppc perf to the perf entry Michal Suchanek
2020-03-20 10:33 ` Andy Shevchenko
2020-03-20 11:23 ` Michal Suchánek
2020-03-20 12:42 ` Andy Shevchenko
2020-03-20 14:42 ` Joe Perches
2020-03-20 16:28 ` Michal Suchánek
2020-03-20 16:31 ` Andy Shevchenko
2020-03-20 16:42 ` Michal Suchánek
2020-03-20 16:47 ` Andy Shevchenko
2020-03-20 21:36 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200225173541.1549955-5-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=msuchanek@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).