From: Guenter Roeck <linux@roeck-us.net>
To: Gene Chen <gene.chen.richtek@gmail.com>,
heikki.krogerus@linux.intel.com, gregkh@linuxfoundation.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, gene_chen@richtek.com,
cy_huang@richtek.com
Subject: Re: [PATCH v2 3/6] usb: typec: tcpci_rt1711h: Add regulator support when source vbus
Date: Thu, 21 Jul 2022 07:28:36 -0700 [thread overview]
Message-ID: <0675b483-9d51-30bc-a51d-9b9f2a0acb51@roeck-us.net> (raw)
In-Reply-To: <20220721061144.35139-4-gene.chen.richtek@gmail.com>
On 7/20/22 23:11, Gene Chen wrote:
> From: Gene Chen <gene_chen@richtek.com>
>
> Add regulator support when source vbus
>
> Signed-off-by: Gene Chen <gene_chen@richtek.com>
> ---
> drivers/usb/typec/tcpm/tcpci_rt1711h.c | 28 ++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> index 3309ceace2b2..52c9594e531d 100644
> --- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> +++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
> @@ -10,6 +10,7 @@
> #include <linux/i2c.h>
> #include <linux/interrupt.h>
> #include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
> #include <linux/usb/tcpm.h>
> #include <linux/regmap.h>
> #include "tcpci.h"
> @@ -40,6 +41,8 @@ struct rt1711h_chip {
> struct tcpci_data data;
> struct tcpci *tcpci;
> struct device *dev;
> + struct regulator *vbus;
> + bool src_en;
> };
>
> static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
> @@ -103,6 +106,26 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
>
> /* dcSRC.DRP : 33% */
> return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
> +
> +}
> +
> +static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
> + bool src, bool snk)
> +{
> + struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
> + int ret;
> +
> + if (chip->src_en == src)
> + return 1;
> +
> + if (src)
> + ret = regulator_enable(chip->vbus);
> + else
> + ret = regulator_disable(chip->vbus);
> +
> + if (!ret)
> + chip->src_en = src;
> + return ret ? ret : 1;
Are you sure this is what you want ? Returning 1 bypasses the code setting
the vbus registers in tcpci.c. If that is on purpose it might make sense
to explain it.
> }
>
> static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
> @@ -246,7 +269,12 @@ static int rt1711h_probe(struct i2c_client *client,
> if (ret < 0)
> return ret;
>
> + chip->vbus = devm_regulator_get(&client->dev, "vbus");
> + if (IS_ERR(chip->vbus))
> + return PTR_ERR(chip->vbus);
> +
This makes regulator support mandatory, which so far was not the case.
That warrants an explanation why it is not a problem for existing users.
Thanks,
Guenter
> chip->data.init = rt1711h_init;
> + chip->data.set_vbus = rt1711h_set_vbus;
> chip->data.set_vconn = rt1711h_set_vconn;
> chip->data.start_drp_toggling = rt1711h_start_drp_toggling;
> chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
next prev parent reply other threads:[~2022-07-21 14:28 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-21 6:11 [PATCH v2 0/6] usb: typec: tcpci_rt1711h: Add compatible with rt1715 Gene Chen
2022-07-21 6:11 ` [PATCH v2 1/6] dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H Gene Chen
2022-07-25 22:36 ` Rob Herring
2022-07-21 6:11 ` [PATCH v2 2/6] usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn Gene Chen
2022-07-21 14:31 ` Guenter Roeck
2022-07-21 6:11 ` [PATCH v2 3/6] usb: typec: tcpci_rt1711h: Add regulator support when source vbus Gene Chen
2022-07-21 14:28 ` Guenter Roeck [this message]
2022-07-22 7:12 ` Gene Chen
2022-07-21 6:11 ` [PATCH v2 4/6] usb: typec: tcpci_rt1711h: Add initial phy setting Gene Chen
2022-07-21 14:32 ` Guenter Roeck
2022-07-21 6:11 ` [PATCH v2 5/6] usb: typec: tcpci_rt1711h: Add compatible id with rt1715 Gene Chen
2022-07-21 14:44 ` Guenter Roeck
2022-07-25 3:04 ` Gene Chen
2022-07-21 6:11 ` [PATCH v2 6/6] usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage level Gene Chen
2022-07-22 0:13 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0675b483-9d51-30bc-a51d-9b9f2a0acb51@roeck-us.net \
--to=linux@roeck-us.net \
--cc=cy_huang@richtek.com \
--cc=devicetree@vger.kernel.org \
--cc=gene.chen.richtek@gmail.com \
--cc=gene_chen@richtek.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).