linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Gene Chen <gene.chen.richtek@gmail.com>
To: linux@roeck-us.net, heikki.krogerus@linux.intel.com,
	gregkh@linuxfoundation.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, gene_chen@richtek.com,
	cy_huang@richtek.com
Subject: [PATCH v2 3/6] usb: typec: tcpci_rt1711h: Add regulator support when source vbus
Date: Thu, 21 Jul 2022 14:11:41 +0800	[thread overview]
Message-ID: <20220721061144.35139-4-gene.chen.richtek@gmail.com> (raw)
In-Reply-To: <20220721061144.35139-1-gene.chen.richtek@gmail.com>

From: Gene Chen <gene_chen@richtek.com>

Add regulator support when source vbus

Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
 drivers/usb/typec/tcpm/tcpci_rt1711h.c | 28 ++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
index 3309ceace2b2..52c9594e531d 100644
--- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c
+++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c
@@ -10,6 +10,7 @@
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
 #include <linux/usb/tcpm.h>
 #include <linux/regmap.h>
 #include "tcpci.h"
@@ -40,6 +41,8 @@ struct rt1711h_chip {
 	struct tcpci_data data;
 	struct tcpci *tcpci;
 	struct device *dev;
+	struct regulator *vbus;
+	bool src_en;
 };
 
 static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val)
@@ -103,6 +106,26 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata)
 
 	/* dcSRC.DRP : 33% */
 	return rt1711h_write16(chip, RT1711H_RTCTRL16, 330);
+
+}
+
+static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata,
+			    bool src, bool snk)
+{
+	struct rt1711h_chip *chip = tdata_to_rt1711h(tdata);
+	int ret;
+
+	if (chip->src_en == src)
+		return 1;
+
+	if (src)
+		ret = regulator_enable(chip->vbus);
+	else
+		ret = regulator_disable(chip->vbus);
+
+	if (!ret)
+		chip->src_en = src;
+	return ret ? ret : 1;
 }
 
 static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata,
@@ -246,7 +269,12 @@ static int rt1711h_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
+	chip->vbus = devm_regulator_get(&client->dev, "vbus");
+	if (IS_ERR(chip->vbus))
+		return PTR_ERR(chip->vbus);
+
 	chip->data.init = rt1711h_init;
+	chip->data.set_vbus = rt1711h_set_vbus;
 	chip->data.set_vconn = rt1711h_set_vconn;
 	chip->data.start_drp_toggling = rt1711h_start_drp_toggling;
 	chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
-- 
2.25.1


  parent reply	other threads:[~2022-07-21  6:12 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-21  6:11 [PATCH v2 0/6] usb: typec: tcpci_rt1711h: Add compatible with rt1715 Gene Chen
2022-07-21  6:11 ` [PATCH v2 1/6] dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H Gene Chen
2022-07-25 22:36   ` Rob Herring
2022-07-21  6:11 ` [PATCH v2 2/6] usb: typec: tcpci_rt1711h: Fix vendor setting when set vconn Gene Chen
2022-07-21 14:31   ` Guenter Roeck
2022-07-21  6:11 ` Gene Chen [this message]
2022-07-21 14:28   ` [PATCH v2 3/6] usb: typec: tcpci_rt1711h: Add regulator support when source vbus Guenter Roeck
2022-07-22  7:12     ` Gene Chen
2022-07-21  6:11 ` [PATCH v2 4/6] usb: typec: tcpci_rt1711h: Add initial phy setting Gene Chen
2022-07-21 14:32   ` Guenter Roeck
2022-07-21  6:11 ` [PATCH v2 5/6] usb: typec: tcpci_rt1711h: Add compatible id with rt1715 Gene Chen
2022-07-21 14:44   ` Guenter Roeck
2022-07-25  3:04     ` Gene Chen
2022-07-21  6:11 ` [PATCH v2 6/6] usb: typec: tcpci_rt1711h: Fix CC PHY noise filter of voltage level Gene Chen
2022-07-22  0:13   ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220721061144.35139-4-gene.chen.richtek@gmail.com \
    --to=gene.chen.richtek@gmail.com \
    --cc=cy_huang@richtek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gene_chen@richtek.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).