* [PATCH] tty: omap-serial: remove set but unused variable
@ 2019-12-05 12:04 Xiongfeng Wang
2019-12-05 12:13 ` Greg KH
0 siblings, 1 reply; 6+ messages in thread
From: Xiongfeng Wang @ 2019-12-05 12:04 UTC (permalink / raw)
To: gregkh, jslaby; +Cc: linux-serial, linux-kernel, huawei.libin, wangxiongfeng2
Fix the following warning:
drivers/tty/serial/omap-serial.c: In function serial_omap_rlsi:
drivers/tty/serial/omap-serial.c:496:16: warning: variable ch set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
---
drivers/tty/serial/omap-serial.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 6420ae5..54ee3ae 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -493,10 +493,9 @@ static unsigned int check_modem_status(struct uart_omap_port *up)
static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr)
{
unsigned int flag;
- unsigned char ch = 0;
if (likely(lsr & UART_LSR_DR))
- ch = serial_in(up, UART_RX);
+ serial_in(up, UART_RX);
up->port.icount.rx++;
flag = TTY_NORMAL;
--
1.7.12.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] tty: omap-serial: remove set but unused variable
2019-12-05 12:04 [PATCH] tty: omap-serial: remove set but unused variable Xiongfeng Wang
@ 2019-12-05 12:13 ` Greg KH
2019-12-05 12:30 ` Xiongfeng Wang
0 siblings, 1 reply; 6+ messages in thread
From: Greg KH @ 2019-12-05 12:13 UTC (permalink / raw)
To: Xiongfeng Wang; +Cc: jslaby, linux-serial, linux-kernel, huawei.libin
On Thu, Dec 05, 2019 at 08:04:36PM +0800, Xiongfeng Wang wrote:
> Fix the following warning:
> drivers/tty/serial/omap-serial.c: In function serial_omap_rlsi:
> drivers/tty/serial/omap-serial.c:496:16: warning: variable ch set but not used [-Wunused-but-set-variable]
>
> Reported-by: Hulk Robot <hulkci@huawei.com>
> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
> ---
> drivers/tty/serial/omap-serial.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
> index 6420ae5..54ee3ae 100644
> --- a/drivers/tty/serial/omap-serial.c
> +++ b/drivers/tty/serial/omap-serial.c
> @@ -493,10 +493,9 @@ static unsigned int check_modem_status(struct uart_omap_port *up)
> static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr)
> {
> unsigned int flag;
> - unsigned char ch = 0;
>
> if (likely(lsr & UART_LSR_DR))
> - ch = serial_in(up, UART_RX);
> + serial_in(up, UART_RX);
Shouldn't you be doing something with 'ch'?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] tty: omap-serial: remove set but unused variable
2019-12-05 12:13 ` Greg KH
@ 2019-12-05 12:30 ` Xiongfeng Wang
2019-12-05 12:39 ` Jiri Slaby
0 siblings, 1 reply; 6+ messages in thread
From: Xiongfeng Wang @ 2019-12-05 12:30 UTC (permalink / raw)
To: Greg KH; +Cc: jslaby, linux-serial, linux-kernel, huawei.libin
On 2019/12/5 20:13, Greg KH wrote:
> On Thu, Dec 05, 2019 at 08:04:36PM +0800, Xiongfeng Wang wrote:
>> Fix the following warning:
>> drivers/tty/serial/omap-serial.c: In function serial_omap_rlsi:
>> drivers/tty/serial/omap-serial.c:496:16: warning: variable ch set but not used [-Wunused-but-set-variable]
>>
>> Reported-by: Hulk Robot <hulkci@huawei.com>
>> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
>> ---
>> drivers/tty/serial/omap-serial.c | 3 +--
>> 1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
>> index 6420ae5..54ee3ae 100644
>> --- a/drivers/tty/serial/omap-serial.c
>> +++ b/drivers/tty/serial/omap-serial.c
>> @@ -493,10 +493,9 @@ static unsigned int check_modem_status(struct uart_omap_port *up)
>> static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr)
>> {
>> unsigned int flag;
>> - unsigned char ch = 0;
>>
>> if (likely(lsr & UART_LSR_DR))
>> - ch = serial_in(up, UART_RX);
>> + serial_in(up, UART_RX);
>
> Shouldn't you be doing something with 'ch'?
Sorry, my original thought is trying not to modify the existing logic.
I will look into the mechanism to see if I need to check 'ch'.
Thanks,
Xiongfeng
>
>
> .
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] tty: omap-serial: remove set but unused variable
2019-12-05 12:30 ` Xiongfeng Wang
@ 2019-12-05 12:39 ` Jiri Slaby
2019-12-06 7:11 ` Xiongfeng Wang
2019-12-06 7:38 ` Xiongfeng Wang
0 siblings, 2 replies; 6+ messages in thread
From: Jiri Slaby @ 2019-12-05 12:39 UTC (permalink / raw)
To: Xiongfeng Wang, Greg KH
Cc: linux-serial, linux-kernel, huawei.libin, shubhrajyoti,
balbi@ti.com >> Felipe Balbi
On 05. 12. 19, 13:30, Xiongfeng Wang wrote:
>
>
> On 2019/12/5 20:13, Greg KH wrote:
>> On Thu, Dec 05, 2019 at 08:04:36PM +0800, Xiongfeng Wang wrote:
>>> Fix the following warning:
>>> drivers/tty/serial/omap-serial.c: In function serial_omap_rlsi:
>>> drivers/tty/serial/omap-serial.c:496:16: warning: variable ch set but not used [-Wunused-but-set-variable]
>>>
>>> Reported-by: Hulk Robot <hulkci@huawei.com>
>>> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
>>> ---
>>> drivers/tty/serial/omap-serial.c | 3 +--
>>> 1 file changed, 1 insertion(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
>>> index 6420ae5..54ee3ae 100644
>>> --- a/drivers/tty/serial/omap-serial.c
>>> +++ b/drivers/tty/serial/omap-serial.c
>>> @@ -493,10 +493,9 @@ static unsigned int check_modem_status(struct uart_omap_port *up)
>>> static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr)
>>> {
>>> unsigned int flag;
>>> - unsigned char ch = 0;
>>>
>>> if (likely(lsr & UART_LSR_DR))
>>> - ch = serial_in(up, UART_RX);
>>> + serial_in(up, UART_RX);
>>
>> Shouldn't you be doing something with 'ch'?
>
> Sorry, my original thought is trying not to modify the existing logic.
> I will look into the mechanism to see if I need to check 'ch'.
The change looks in fact correct, see:
commit 9a12fcf8b1543c99ffcec3d61db86f0dea52dc9d
Author: Shubhrajyoti D <shubhrajyoti@ti.com>
Date: Fri Sep 21 20:07:19 2012 +0530
serial: omap: fix the reciever line error case
It also says: "This is recommended in the interrupt reset method in the
table 23-246 of the omap4 TRM."
The character read is erroneous and should be apparently dropped. But
you should add a comment about it, though.
thanks,
--
js
suse labs
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] tty: omap-serial: remove set but unused variable
2019-12-05 12:39 ` Jiri Slaby
@ 2019-12-06 7:11 ` Xiongfeng Wang
2019-12-06 7:38 ` Xiongfeng Wang
1 sibling, 0 replies; 6+ messages in thread
From: Xiongfeng Wang @ 2019-12-06 7:11 UTC (permalink / raw)
To: Jiri Slaby, Greg KH
Cc: linux-serial, linux-kernel, huawei.libin, shubhrajyoti,
balbi@ti.com >> Felipe Balbi
On 2019/12/5 20:39, Jiri Slaby wrote:
> On 05. 12. 19, 13:30, Xiongfeng Wang wrote:
>>
>>
>> On 2019/12/5 20:13, Greg KH wrote:
>>> On Thu, Dec 05, 2019 at 08:04:36PM +0800, Xiongfeng Wang wrote:
>>>> Fix the following warning:
>>>> drivers/tty/serial/omap-serial.c: In function serial_omap_rlsi:
>>>> drivers/tty/serial/omap-serial.c:496:16: warning: variable ch set but not used [-Wunused-but-set-variable]
>>>>
>>>> Reported-by: Hulk Robot <hulkci@huawei.com>
>>>> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
>>>> ---
>>>> drivers/tty/serial/omap-serial.c | 3 +--
>>>> 1 file changed, 1 insertion(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
>>>> index 6420ae5..54ee3ae 100644
>>>> --- a/drivers/tty/serial/omap-serial.c
>>>> +++ b/drivers/tty/serial/omap-serial.c
>>>> @@ -493,10 +493,9 @@ static unsigned int check_modem_status(struct uart_omap_port *up)
>>>> static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr)
>>>> {
>>>> unsigned int flag;
>>>> - unsigned char ch = 0;
>>>>
>>>> if (likely(lsr & UART_LSR_DR))
>>>> - ch = serial_in(up, UART_RX);
>>>> + serial_in(up, UART_RX);
>>>
>>> Shouldn't you be doing something with 'ch'?
>>
>> Sorry, my original thought is trying not to modify the existing logic.
>> I will look into the mechanism to see if I need to check 'ch'.
>
> The change looks in fact correct, see:
> commit 9a12fcf8b1543c99ffcec3d61db86f0dea52dc9d
> Author: Shubhrajyoti D <shubhrajyoti@ti.com>
> Date: Fri Sep 21 20:07:19 2012 +0530
>
> serial: omap: fix the reciever line error case
>
> It also says: "This is recommended in the interrupt reset method in the
> table 23-246 of the omap4 TRM."
>
> The character read is erroneous and should be apparently dropped. But
> you should add a comment about it, though.
Thanks a lot. I will add it in the comment and send another version.
Thanks,
Xiongfeng
>
> thanks,
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] tty: omap-serial: remove set but unused variable
2019-12-05 12:39 ` Jiri Slaby
2019-12-06 7:11 ` Xiongfeng Wang
@ 2019-12-06 7:38 ` Xiongfeng Wang
1 sibling, 0 replies; 6+ messages in thread
From: Xiongfeng Wang @ 2019-12-06 7:38 UTC (permalink / raw)
To: Jiri Slaby, Greg KH; +Cc: linux-serial, linux-kernel, huawei.libin
On 2019/12/5 20:39, Jiri Slaby wrote:
> On 05. 12. 19, 13:30, Xiongfeng Wang wrote:
>>
>>
>> On 2019/12/5 20:13, Greg KH wrote:
>>> On Thu, Dec 05, 2019 at 08:04:36PM +0800, Xiongfeng Wang wrote:
>>>> Fix the following warning:
>>>> drivers/tty/serial/omap-serial.c: In function serial_omap_rlsi:
>>>> drivers/tty/serial/omap-serial.c:496:16: warning: variable ch set but not used [-Wunused-but-set-variable]
>>>>
>>>> Reported-by: Hulk Robot <hulkci@huawei.com>
>>>> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
>>>> ---
>>>> drivers/tty/serial/omap-serial.c | 3 +--
>>>> 1 file changed, 1 insertion(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
>>>> index 6420ae5..54ee3ae 100644
>>>> --- a/drivers/tty/serial/omap-serial.c
>>>> +++ b/drivers/tty/serial/omap-serial.c
>>>> @@ -493,10 +493,9 @@ static unsigned int check_modem_status(struct uart_omap_port *up)
>>>> static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr)
>>>> {
>>>> unsigned int flag;
>>>> - unsigned char ch = 0;
>>>>
>>>> if (likely(lsr & UART_LSR_DR))
>>>> - ch = serial_in(up, UART_RX);
>>>> + serial_in(up, UART_RX);
>>>
>>> Shouldn't you be doing something with 'ch'?
>>
>> Sorry, my original thought is trying not to modify the existing logic.
>> I will look into the mechanism to see if I need to check 'ch'.
>
> The change looks in fact correct, see:
> commit 9a12fcf8b1543c99ffcec3d61db86f0dea52dc9d
> Author: Shubhrajyoti D <shubhrajyoti@ti.com>
> Date: Fri Sep 21 20:07:19 2012 +0530
>
> serial: omap: fix the reciever line error case
>
> It also says: "This is recommended in the interrupt reset method in the
> table 23-246 of the omap4 TRM."
>
> The character read is erroneous and should be apparently dropped. But
> you should add a comment about it, though.
>
Thanks a lot. I will add it in the comment and send another version.
Thanks,
Xiongfeng
> thanks,
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-12-06 7:39 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-05 12:04 [PATCH] tty: omap-serial: remove set but unused variable Xiongfeng Wang
2019-12-05 12:13 ` Greg KH
2019-12-05 12:30 ` Xiongfeng Wang
2019-12-05 12:39 ` Jiri Slaby
2019-12-06 7:11 ` Xiongfeng Wang
2019-12-06 7:38 ` Xiongfeng Wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).