[PATCHv3 1/2] proc: mm: export PTE sizes directly in smaps

[PATCHv3 1/2] proc: mm: export PTE sizes directly in smaps

[Fan Du]

From: Dave Hansen <dave.hansen@intel.com>

/proc/$pid/smaps has a number of fields that are intended to imply the
kinds of PTEs used to map memory.  "AnonHugePages" obviously tells you
how many PMDs are being used.  "MMUPageSize" along with the "Hugetlb"
fields tells you how many PTEs you have for a huge page.

The current mechanisms work fine when we have one or two page sizes.
But, they start to get a bit muddled when we mix page sizes inside
one VMA.  For instance, the DAX folks were proposing adding a set of
fields like:

	DevicePages:
	DeviceHugePages:
	DeviceGiganticPages:
	DeviceGinormousPages:

to unmuddle things when page sizes get mixed.  That's fine, but
it does require userspace know the mapping from our various
arbitrary names to hardware page sizes on each architecture and
kernel configuration.  That seems rather suboptimal.

What folks really want is to know how much memory is mapped with
each page size.  How about we just do *that* instead?

Patch attached.  Seems harmless enough.  Seems to compile on a
bunch of random architectures.  Makes smaps look like this:

Private_Hugetlb:       0 kB
Swap:                  0 kB
SwapPss:               0 kB
KernelPageSize:        4 kB
MMUPageSize:           4 kB
Locked:                0 kB
Ptes@4kB:	      32 kB
Ptes@2MB:	    2048 kB

The format I used here should be unlikely to break smaps parsers
unless they're looking for "kB" and now match the 'Ptes@4kB' instead
of the one at the end of the line.

Note: hugetlbfs PTEs are unusual.  We can have more than one "pte_t"
for each hugetlbfs "page".  arm64 has this configuration, and probably
others.  The code should now handle when an hstate's size is not equal
to one of the page table entry sizes.  For instance, it assumes that
hstates between PMD_SIZE and PUD_SIZE are made up of multiple PMDs
and prints them as such.

I've tested this on x86 with normal 4k ptes, anonymous huge pages,
1G hugetlbfs and 2M hugetlbfs pages.

1. I'd like to thank Dan Williams for showing me a mirror as I
   complained about the bozo that introduced 'AnonHugePages'.

[Fan]
Rebase the original patch from Dave Hansen by fixing a couple of compile
issues.

Signed-off-by: Fan Du <fan.du@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@intel.com>
---
 Documentation/filesystems/proc.txt |   6 +++
 fs/proc/task_mmu.c                 | 106 ++++++++++++++++++++++++++++++++++++-
 mm/hugetlb.c                       |  11 ++++
 3 files changed, 121 insertions(+), 2 deletions(-)

diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index adba21b..a11ab80 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -423,6 +423,9 @@ SwapPss:               0 kB
 KernelPageSize:        4 kB
 MMUPageSize:           4 kB
 Locked:                0 kB
+Ptes@4kB:	       4 kB
+Ptes@2MB:	    8192 kB
+
 VmFlags: rd ex mr mw me dw
 
 the first of these lines shows the same information as is displayed for the
@@ -460,6 +463,9 @@ replaced by copy-on-write) part of the underlying shmem object out on swap.
 "SwapPss" shows proportional swap share of this mapping. Unlike "Swap", this
 does not take into account swapped out page of underlying shmem objects.
 "Locked" indicates whether the mapping is locked in memory or not.
+"Ptes@..." lines show how many page table entries are currently in place and
+pointing to memory.  There is an entry for each size present in the hardware
+page tables for this mapping.
 
 "VmFlags" field deserves a separate description. This member represents the kernel
 flags associated with the particular virtual memory area in two letter encoded
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 5589b4b..30dbf37 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -451,6 +451,9 @@ struct mem_size_stats {
 	unsigned long shared_hugetlb;
 	unsigned long private_hugetlb;
 	unsigned long first_vma_start;
+	unsigned long rss_pte;
+	unsigned long rss_pmd;
+	unsigned long rss_pud;
 	u64 pss;
 	u64 pss_locked;
 	u64 swap_pss;
@@ -529,6 +532,7 @@ static void smaps_pte_entry(pte_t *pte, unsigned long addr,
 
 	if (pte_present(*pte)) {
 		page = vm_normal_page(vma, addr, *pte);
+		mss->rss_pte += PAGE_SIZE;
 	} else if (is_swap_pte(*pte)) {
 		swp_entry_t swpent = pte_to_swp_entry(*pte);
 
@@ -590,6 +594,7 @@ static void smaps_pmd_entry(pmd_t *pmd, unsigned long addr,
 		/* pass */;
 	else
 		VM_BUG_ON_PAGE(1, page);
+	mss->rss_pmd += PMD_SIZE;
 	smaps_account(mss, page, true, pmd_young(*pmd), pmd_dirty(*pmd));
 }
 #else
@@ -699,6 +704,30 @@ static void show_smap_vma_flags(struct seq_file *m, struct vm_area_struct *vma)
 }
 
 #ifdef CONFIG_HUGETLB_PAGE
+/*
+ * Most architectures have a 1:1 mapping of PTEs to hugetlb page
+ * sizes, but there are some outliers like arm64 that use
+ * multiple hardware PTEs to make a hugetlb "page".  Do not
+ * assume that all 'hpage_size's are not exactly at a page table
+ * size boundary.  Instead, accept arbitrary 'hpage_size's and
+ * assume they are made up of the next-smallest size.  We do not
+ * handle PGD-sized hpages and hugetlb_add_hstate() will WARN()
+ * if it sees one.
+ *
+ * Note also that the page walker code only calls us once per
+ * huge 'struct page', *not* once per PTE in the page tables.
+ */
+static void smaps_hugetlb_present_hpage(struct mem_size_stats *mss,
+					unsigned long hpage_size)
+{
+	if (hpage_size >= PUD_SIZE)
+		mss->rss_pud += hpage_size;
+	else if (hpage_size >= PMD_SIZE)
+		mss->rss_pmd += hpage_size;
+	else
+		mss->rss_pte += hpage_size;
+}
+
 static int smaps_hugetlb_range(pte_t *pte, unsigned long hmask,
 				 unsigned long addr, unsigned long end,
 				 struct mm_walk *walk)
@@ -719,11 +748,14 @@ static int smaps_hugetlb_range(pte_t *pte, unsigned long hmask,
 	}
 	if (page) {
 		int mapcount = page_mapcount(page);
+		unsigned long hpage_size = huge_page_size(hstate_vma(vma));
+
+		smaps_hugetlb_present_hpage(mss, hpage_size);
 
 		if (mapcount >= 2)
-			mss->shared_hugetlb += huge_page_size(hstate_vma(vma));
+			mss->shared_hugetlb += hpage_size;
 		else
-			mss->private_hugetlb += huge_page_size(hstate_vma(vma));
+			mss->private_hugetlb += hpage_size;
 	}
 	return 0;
 }
@@ -733,6 +765,75 @@ void __weak arch_show_smap(struct seq_file *m, struct vm_area_struct *vma)
 {
 }
 
+/*
+ * What units should we use for a given number?  We want
+ * 2048 to be 2k, so we return 'k'.  1048576 should be
+ * 1M, so we return 'M'.
+ */
+static char size_unit(unsigned long long nr)
+{
+	/*
+	 * This ' ' might look a bit goofy in the output.  But, why
+	 * bother doing anything.  Do we even have a <1k page size?
+	 */
+	if (nr < (1ULL<<10))
+		return ' ';
+	if (nr < (1ULL<<20))
+		return 'k';
+	if (nr < (1ULL<<30))
+		return 'M';
+	if (nr < (1ULL<<40))
+		return 'G';
+	if (nr < (1ULL<<50))
+		return 'T';
+	if (nr < (1ULL<<60))
+		return 'P';
+	return 'E';
+}
+
+/*
+ * How should we shift down a a given number to scale it
+ * with the units we are printing it as? 2048 to be 2k,
+ * so we want it shifted down by 10.  1048576 should be
+ * 1M, so we want it shifted down by 20.
+ */
+static int size_shift(unsigned long long nr)
+{
+	if (nr < (1ULL<<10))
+		return 0;
+	if (nr < (1ULL<<20))
+		return 10;
+	if (nr < (1ULL<<30))
+		return 20;
+	if (nr < (1ULL<<40))
+		return 30;
+	if (nr < (1ULL<<50))
+		return 40;
+	if (nr < (1ULL<<60))
+		return 50;
+	return 60;
+}
+
+static void show_one_smap_pte(struct seq_file *m, unsigned long bytes_rss,
+		unsigned long pte_size)
+{
+	seq_printf(m, "Ptes@%ld%cB:	%8lu kB\n",
+			pte_size >> size_shift(pte_size),
+			size_unit(pte_size),
+			bytes_rss >> 10);
+}
+
+static void show_smap_ptes(struct seq_file *m, struct mem_size_stats *mss)
+{
+	/* Only print the entries for page sizes present in the VMA */
+	if (mss->rss_pte)
+		show_one_smap_pte(m, mss->rss_pte, PAGE_SIZE);
+	if (mss->rss_pmd)
+		show_one_smap_pte(m, mss->rss_pmd, PMD_SIZE);
+	if (mss->rss_pud)
+		show_one_smap_pte(m, mss->rss_pud, PUD_SIZE);
+}
+
 static int show_smap(struct seq_file *m, void *v, int is_pid)
 {
 	struct proc_maps_private *priv = m->private;
@@ -852,6 +953,7 @@ static int show_smap(struct seq_file *m, void *v, int is_pid)
 			   (unsigned long)(mss->pss >> (10 + PSS_SHIFT)));
 
 	if (!rollup_mode) {
+		show_smap_ptes(m, mss);
 		arch_show_smap(m, vma);
 		show_smap_vma_flags(m, vma);
 	}
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 424b0ef..b98b2ce 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2836,6 +2836,17 @@ void __init hugetlb_add_hstate(unsigned int order)
 					huge_page_size(h)/1024);
 
 	parsed_hstate = h;
+
+	/*
+	 * PGD_SIZE isn't widely made available by architecures,
+	 * so use PUD_SIZE*PTRS_PER_PUD as a substitute.
+	 *
+	 * Check for sizes that might be mapped by a PGD.  There
+	 * are none of these known today, but be on the lookout.
+	 * If this trips, we will need to update the mss->rss_*
+	 * code in fs/proc/task_mmu.c.
+	 */
+	WARN_ON_ONCE((PAGE_SIZE << order) >= PUD_SIZE * PTRS_PER_PUD);
 }
 
 static int __init hugetlb_nrpages_setup(char *s)
-- 
1.8.3.1

[PATCH 2/2] Add /proc/PID/{smaps, numa_maps} support for DAX

[Fan Du]

So user could check those interface for more detailed
information about how much DAX mappings are currently
created.

Here we use vma_is_dax method to find specific page
struture with DAX {huge, normal}page mappings,
vm_normal_page routine works as before without any
impact on the existing logical where _vm_normal_page
are called.

With this patch, user could check Device DAX usage at Ptes@ readings,
fox example, statistics from a Device DAX algined by 2MB:

7f6c17800000-7f6c17e00000 rw-s 00000000 00:06 20559  /dev/dax12.0
Size:               6144 kB
.
.
.
Ptes@2MB:      		6144 kB

Signed-off-by: Fan Du <fan.du@intel.com>
---
v3:
* Elaborate more about the usage suggested by Michal Hocko

v2:
* Using pte_devmap to check valid pfn page structure,
  Pointed out by Dan. thx!

---
 fs/proc/task_mmu.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 30dbf37..5c4535c 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -531,7 +531,10 @@ static void smaps_pte_entry(pte_t *pte, unsigned long addr,
 	struct page *page = NULL;
 
 	if (pte_present(*pte)) {
-		page = vm_normal_page(vma, addr, *pte);
+		if (!vma_is_dax(vma))
+			page = vm_normal_page(vma, addr, *pte);
+		else if (pte_devmap(*pte))
+			page = pte_page(*pte);
 		mss->rss_pte += PAGE_SIZE;
 	} else if (is_swap_pte(*pte)) {
 		swp_entry_t swpent = pte_to_swp_entry(*pte);
@@ -583,7 +586,11 @@ static void smaps_pmd_entry(pmd_t *pmd, unsigned long addr,
 	struct page *page;
 
 	/* FOLL_DUMP will return -EFAULT on huge zero page */
-	page = follow_trans_huge_pmd(vma, addr, pmd, FOLL_DUMP);
+	if (!vma_is_dax(vma))
+		page = follow_trans_huge_pmd(vma, addr, pmd, FOLL_DUMP);
+	else if (pmd_devmap(*pmd))
+		page = pmd_page(*pmd);
+
 	if (IS_ERR_OR_NULL(page))
 		return;
 	if (PageAnon(page))
@@ -1770,13 +1777,15 @@ static int gather_pte_stats(pmd_t *pmd, unsigned long addr,
 	spinlock_t *ptl;
 	pte_t *orig_pte;
 	pte_t *pte;
+	struct page *page;
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 	ptl = pmd_trans_huge_lock(pmd, vma);
 	if (ptl) {
-		struct page *page;
-
-		page = can_gather_numa_stats_pmd(*pmd, vma, addr);
+		if (!vma_is_dax(vma))
+			page = can_gather_numa_stats_pmd(*pmd, vma, addr);
+		else if (pmd_devmap(*pmd))
+			page = pmd_page(*pmd);
 		if (page)
 			gather_stats(page, md, pmd_dirty(*pmd),
 				     HPAGE_PMD_SIZE/PAGE_SIZE);
@@ -1789,7 +1798,10 @@ static int gather_pte_stats(pmd_t *pmd, unsigned long addr,
 #endif
 	orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl);
 	do {
-		struct page *page = can_gather_numa_stats(*pte, vma, addr);
+		if (!vma_is_dax(vma))
+			page = can_gather_numa_stats(*pte, vma, addr);
+		else if (pte_devmap(*pte))
+			page = pte_page(*pte);
 		if (!page)
 			continue;
 		gather_stats(page, md, pte_dirty(*pte), 1);
-- 
1.8.3.1

Re: [PATCHv3 1/2] proc: mm: export PTE sizes directly in smaps

[Michal Hocko]

On Wed 25-10-17 08:27:34, Fan Du wrote:
> From: Dave Hansen <dave.hansen@intel.com>
> 
> /proc/$pid/smaps has a number of fields that are intended to imply the
> kinds of PTEs used to map memory.  "AnonHugePages" obviously tells you
> how many PMDs are being used.  "MMUPageSize" along with the "Hugetlb"
> fields tells you how many PTEs you have for a huge page.
> 
> The current mechanisms work fine when we have one or two page sizes.
> But, they start to get a bit muddled when we mix page sizes inside
> one VMA.  For instance, the DAX folks were proposing adding a set of
> fields like:
> 
> 	DevicePages:
> 	DeviceHugePages:
> 	DeviceGiganticPages:
> 	DeviceGinormousPages:
> 
> to unmuddle things when page sizes get mixed.  That's fine, but
> it does require userspace know the mapping from our various
> arbitrary names to hardware page sizes on each architecture and
> kernel configuration.  That seems rather suboptimal.
> 
> What folks really want is to know how much memory is mapped with
> each page size.  How about we just do *that* instead?
> 
> Patch attached.  Seems harmless enough.  Seems to compile on a
> bunch of random architectures.  Makes smaps look like this:
> 
> Private_Hugetlb:       0 kB
> Swap:                  0 kB
> SwapPss:               0 kB
> KernelPageSize:        4 kB
> MMUPageSize:           4 kB
> Locked:                0 kB
> Ptes@4kB:	      32 kB
> Ptes@2MB:	    2048 kB

Yes, I agree that the current situation is quite messy. But I am
wondering who is going to use this new information and what for?

> The format I used here should be unlikely to break smaps parsers
> unless they're looking for "kB" and now match the 'Ptes@4kB' instead
> of the one at the end of the line.
> 
> Note: hugetlbfs PTEs are unusual.  We can have more than one "pte_t"
> for each hugetlbfs "page".  arm64 has this configuration, and probably
> others.  The code should now handle when an hstate's size is not equal
> to one of the page table entry sizes.  For instance, it assumes that
> hstates between PMD_SIZE and PUD_SIZE are made up of multiple PMDs
> and prints them as such.
> 
> I've tested this on x86 with normal 4k ptes, anonymous huge pages,
> 1G hugetlbfs and 2M hugetlbfs pages.
> 
> 1. I'd like to thank Dan Williams for showing me a mirror as I
>    complained about the bozo that introduced 'AnonHugePages'.

Does the new code add any measurable overhead? I assume it shouldn't
from a quick look at the code. Anyway this is a useful information
because there are people who really want it as cheap as possible.

> [Fan]
> Rebase the original patch from Dave Hansen by fixing a couple of compile
> issues.
> 
> Signed-off-by: Fan Du <fan.du@intel.com>
> Signed-off-by: Dave Hansen <dave.hansen@intel.com>

nit, the s-o-b ordering should be reverse. The original author should be
first.
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 2/2] Add /proc/PID/{smaps, numa_maps} support for DAX

[Michal Hocko]

On Wed 25-10-17 08:27:35, Fan Du wrote:
> So user could check those interface for more detailed
> information about how much DAX mappings are currently
> created.
> 
> Here we use vma_is_dax method to find specific page
> struture with DAX {huge, normal}page mappings,
> vm_normal_page routine works as before without any
> impact on the existing logical where _vm_normal_page
> are called.
> 
> With this patch, user could check Device DAX usage at Ptes@ readings,
> fox example, statistics from a Device DAX algined by 2MB:
> 
> 7f6c17800000-7f6c17e00000 rw-s 00000000 00:06 20559  /dev/dax12.0
> Size:               6144 kB
> .
> .
> .
> Ptes@2MB:      		6144 kB

This says how but it doesn't tell why and who is going to use the
information and what for.

> 
> Signed-off-by: Fan Du <fan.du@intel.com>
> ---
> v3:
> * Elaborate more about the usage suggested by Michal Hocko
> 
> v2:
> * Using pte_devmap to check valid pfn page structure,
>   Pointed out by Dan. thx!
> 
> ---
>  fs/proc/task_mmu.c | 24 ++++++++++++++++++------
>  1 file changed, 18 insertions(+), 6 deletions(-)
> 
> diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
> index 30dbf37..5c4535c 100644
> --- a/fs/proc/task_mmu.c
> +++ b/fs/proc/task_mmu.c
> @@ -531,7 +531,10 @@ static void smaps_pte_entry(pte_t *pte, unsigned long addr,
>  	struct page *page = NULL;
>  
>  	if (pte_present(*pte)) {
> -		page = vm_normal_page(vma, addr, *pte);
> +		if (!vma_is_dax(vma))
> +			page = vm_normal_page(vma, addr, *pte);
> +		else if (pte_devmap(*pte))
> +			page = pte_page(*pte);
>  		mss->rss_pte += PAGE_SIZE;
>  	} else if (is_swap_pte(*pte)) {
>  		swp_entry_t swpent = pte_to_swp_entry(*pte);
> @@ -583,7 +586,11 @@ static void smaps_pmd_entry(pmd_t *pmd, unsigned long addr,
>  	struct page *page;
>  
>  	/* FOLL_DUMP will return -EFAULT on huge zero page */
> -	page = follow_trans_huge_pmd(vma, addr, pmd, FOLL_DUMP);
> +	if (!vma_is_dax(vma))
> +		page = follow_trans_huge_pmd(vma, addr, pmd, FOLL_DUMP);
> +	else if (pmd_devmap(*pmd))
> +		page = pmd_page(*pmd);
> +
>  	if (IS_ERR_OR_NULL(page))
>  		return;
>  	if (PageAnon(page))
> @@ -1770,13 +1777,15 @@ static int gather_pte_stats(pmd_t *pmd, unsigned long addr,
>  	spinlock_t *ptl;
>  	pte_t *orig_pte;
>  	pte_t *pte;
> +	struct page *page;
>  
>  #ifdef CONFIG_TRANSPARENT_HUGEPAGE
>  	ptl = pmd_trans_huge_lock(pmd, vma);
>  	if (ptl) {
> -		struct page *page;
> -
> -		page = can_gather_numa_stats_pmd(*pmd, vma, addr);
> +		if (!vma_is_dax(vma))
> +			page = can_gather_numa_stats_pmd(*pmd, vma, addr);
> +		else if (pmd_devmap(*pmd))
> +			page = pmd_page(*pmd);
>  		if (page)
>  			gather_stats(page, md, pmd_dirty(*pmd),
>  				     HPAGE_PMD_SIZE/PAGE_SIZE);
> @@ -1789,7 +1798,10 @@ static int gather_pte_stats(pmd_t *pmd, unsigned long addr,
>  #endif
>  	orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl);
>  	do {
> -		struct page *page = can_gather_numa_stats(*pte, vma, addr);
> +		if (!vma_is_dax(vma))
> +			page = can_gather_numa_stats(*pte, vma, addr);
> +		else if (pte_devmap(*pte))
> +			page = pte_page(*pte);
>  		if (!page)
>  			continue;
>  		gather_stats(page, md, pte_dirty(*pte), 1);
> -- 
> 1.8.3.1

-- 
Michal Hocko
SUSE Labs

Re: [PATCH 2/2] Add /proc/PID/{smaps, numa_maps} support for DAX

[Dave Hansen]

On 10/25/2017 02:30 AM, Michal Hocko wrote:
>>
>> 7f6c17800000-7f6c17e00000 rw-s 00000000 00:06 20559  /dev/dax12.0
>> Size:               6144 kB
>> .
>> .
>> .
>> Ptes@2MB:      		6144 kB
> This says how but it doesn't tell why and who is going to use the
> information and what for.

The original motivation was for DAX.  They have parallel large page
infrastructure separate from hugetlbfs and THP.  Their constraints about
when they can use large pages differ from the normal mm cases, so it is
hard to tell when large pages are in use.  For instance, the file on
*disk* has to be 2MB contiguous and aligned to map with 2MB pages even
if the mmap() address is >2MB and 2MB-aligned.

But, in general, this seems like the thing that we probably should have
done in the first place for THP.  It's a lot more generic and does not
require someone reading the file to know what the particular
architecture's page sizes are.

RE: [PATCHv3 1/2] proc: mm: export PTE sizes directly in smaps

[Du, Fan]

>-----Original Message-----
>From: Michal Hocko [mailto:mhocko@kernel.org]
>Sent: Wednesday, October 25, 2017 5:29 PM
>To: Du, Fan <fan.du@intel.com>
>Cc: akpm@linux-foundation.org; hch@lst.de; Williams, Dan J
><dan.j.williams@intel.com>; Hansen, Dave <dave.hansen@intel.com>;
>linux-kernel@vger.kernel.org; linux-api@vger.kernel.org
>Subject: Re: [PATCHv3 1/2] proc: mm: export PTE sizes directly in smaps
>
>On Wed 25-10-17 08:27:34, Fan Du wrote:
>> From: Dave Hansen <dave.hansen@intel.com>
>>
>> /proc/$pid/smaps has a number of fields that are intended to imply the
>> kinds of PTEs used to map memory.  "AnonHugePages" obviously tells you
>> how many PMDs are being used.  "MMUPageSize" along with the
>"Hugetlb"
>> fields tells you how many PTEs you have for a huge page.
>>
>> The current mechanisms work fine when we have one or two page sizes.
>> But, they start to get a bit muddled when we mix page sizes inside
>> one VMA.  For instance, the DAX folks were proposing adding a set of
>> fields like:
>>
>> 	DevicePages:
>> 	DeviceHugePages:
>> 	DeviceGiganticPages:
>> 	DeviceGinormousPages:
>>
>> to unmuddle things when page sizes get mixed.  That's fine, but
>> it does require userspace know the mapping from our various
>> arbitrary names to hardware page sizes on each architecture and
>> kernel configuration.  That seems rather suboptimal.
>>
>> What folks really want is to know how much memory is mapped with
>> each page size.  How about we just do *that* instead?
>>
>> Patch attached.  Seems harmless enough.  Seems to compile on a
>> bunch of random architectures.  Makes smaps look like this:
>>
>> Private_Hugetlb:       0 kB
>> Swap:                  0 kB
>> SwapPss:               0 kB
>> KernelPageSize:        4 kB
>> MMUPageSize:           4 kB
>> Locked:                0 kB
>> Ptes@4kB:	      32 kB
>> Ptes@2MB:	    2048 kB
>
>Yes, I agree that the current situation is quite messy. But I am
>wondering who is going to use this new information and what for?

It comes from my customer who are using Device DAX, looking for any statistics
of how much persistent memory mapping has been created, or used by application.

Current vm_normal_page implementation doesn't pick up page with DEVMAP pfn.
The second patch fix this and export DAX mappings into counters introduced in the
first patch.

IMO, the user care more about how much persistent memory they used, how about
a small tweak with smaps_account, and report the total mapping size into RSS/PSS,
which user are usually more familiar with?


>> The format I used here should be unlikely to break smaps parsers
>> unless they're looking for "kB" and now match the 'Ptes@4kB' instead
>> of the one at the end of the line.
>>
>> Note: hugetlbfs PTEs are unusual.  We can have more than one "pte_t"
>> for each hugetlbfs "page".  arm64 has this configuration, and probably
>> others.  The code should now handle when an hstate's size is not equal
>> to one of the page table entry sizes.  For instance, it assumes that
>> hstates between PMD_SIZE and PUD_SIZE are made up of multiple PMDs
>> and prints them as such.
>>
>> I've tested this on x86 with normal 4k ptes, anonymous huge pages,
>> 1G hugetlbfs and 2M hugetlbfs pages.
>>
>> 1. I'd like to thank Dan Williams for showing me a mirror as I
>>    complained about the bozo that introduced 'AnonHugePages'.
>
>Does the new code add any measurable overhead? I assume it shouldn't
>from a quick look at the code. Anyway this is a useful information
>because there are people who really want it as cheap as possible.
>
>> [Fan]
>> Rebase the original patch from Dave Hansen by fixing a couple of compile
>> issues.
>>
>> Signed-off-by: Fan Du <fan.du@intel.com>
>> Signed-off-by: Dave Hansen <dave.hansen@intel.com>
>
>nit, the s-o-b ordering should be reverse. The original author should be
>first.

Oh, got it! seems there are community curtesy I'm not fully aware.
Apologize to Dave.


>--
>Michal Hocko
>SUSE Labs

[PATCH v4] Add /proc/PID/smaps support for DAX

[Fan Du]

Memory behind device DAX is not attached into normal memory
management system, when user mmap /dev/dax, smaps part is
currently missing, so no idea for user to check how much
device DAX memory are actually used in practice.

Whether vma is backed up by normal page,huge page, or both
at the same time, this makes no difference for device DAX
user so far.

Using existing smaps structure is enough to do the job, so
this patch tries to use existing RSS/PSS stuff for statistics.
An example reading is like this:
----------------------------------------------------
7f30fe200000-7f3102200000 rw-s 00000000 00:06 19567                      /dev/dax12.0
Size:              65536 kB
KernelPageSize:        4 kB
MMUPageSize:           4 kB
Rss:               65536 kB
Pss:               65536 kB
Shared_Clean:          0 kB
Shared_Dirty:          0 kB
Private_Clean:         0 kB
Private_Dirty:     65536 kB
Referenced:        65536 kB
Anonymous:             0 kB
LazyFree:              0 kB
AnonHugePages:         0 kB
ShmemPmdMapped:        0 kB
Shared_Hugetlb:        0 kB
Private_Hugetlb:       0 kB
Swap:                  0 kB
SwapPss:               0 kB
Locked:            65536 kB
ProtectionKey:         0
VmFlags: rd wr sh mr mw me ms mm hg

Signed-off-by: Fan Du <fan.du@intel.com>
---
v4:
* Merge device DAX readings into existing smap counters
  for simplicity.

v3:
* Elaborate more about the usage suggested by Michal Hocko

v2:
* Using pte_devmap to check valid pfn page structure,
  Pointed out by Dan. thx!
 fs/proc/task_mmu.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 72 insertions(+), 2 deletions(-)

diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 5589b4b..9b2d3e6 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -507,6 +507,55 @@ static void smaps_account(struct mem_size_stats *mss, struct page *page,
 	}
 }
 
+/* page structure behind DAX mappings is NOT compound page
+ * when it's a huge page mappings, so introduce new API to
+ * account for both PMD and PUD mapping.
+ */
+static void smaps_account_dax_huge(struct mem_size_stats *mss,
+			struct page *page, unsigned long size, bool young, bool dirty)
+{
+	int mapcount = page_mapcount(page);
+
+	if (PageAnon(page)) {
+		mss->anonymous += size;
+		if (!PageSwapBacked(page) && !dirty && !PageDirty(page))
+			mss->lazyfree += size;
+	}
+
+	mss->resident += size;
+	/* Accumulate the size in pages that have been accessed. */
+	if (young || page_is_young(page) || PageReferenced(page))
+		mss->referenced += size;
+
+	/*
+	 * page_count(page) == 1 guarantees the page is mapped exactly once.
+	 * If any subpage of the compound page mapped with PTE it would elevate
+	 * page_count().
+	 */
+	if (page_count(page) == 1) {
+		if (dirty || PageDirty(page))
+			mss->private_dirty += size;
+		else
+			mss->private_clean += size;
+		mss->pss += (u64)size << PSS_SHIFT;
+		return;
+	}
+
+	if (mapcount >= 2) {
+		if (dirty || PageDirty(page))
+			mss->shared_dirty += size;
+		else
+			mss->shared_clean += size;
+		mss->pss += (size << PSS_SHIFT) / mapcount;
+	} else {
+		if (dirty || PageDirty(page))
+			mss->private_dirty += size;
+		else
+			mss->private_clean += size;
+		mss->pss += size << PSS_SHIFT;
+	}
+}
+
 #ifdef CONFIG_SHMEM
 static int smaps_pte_hole(unsigned long addr, unsigned long end,
 		struct mm_walk *walk)
@@ -528,7 +577,16 @@ static void smaps_pte_entry(pte_t *pte, unsigned long addr,
 	struct page *page = NULL;
 
 	if (pte_present(*pte)) {
-		page = vm_normal_page(vma, addr, *pte);
+		if (!vma_is_dax(vma))
+			page = vm_normal_page(vma, addr, *pte);
+		else if (pte_devmap(*pte)) {
+			struct dev_pagemap *pgmap;
+
+			pgmap = get_dev_pagemap(pte_pfn(*pte), NULL);
+			if (!pgmap)
+				return;
+			page = pte_page(*pte);
+		}
 	} else if (is_swap_pte(*pte)) {
 		swp_entry_t swpent = pte_to_swp_entry(*pte);
 
@@ -579,7 +637,19 @@ static void smaps_pmd_entry(pmd_t *pmd, unsigned long addr,
 	struct page *page;
 
 	/* FOLL_DUMP will return -EFAULT on huge zero page */
-	page = follow_trans_huge_pmd(vma, addr, pmd, FOLL_DUMP);
+	if (!vma_is_dax(vma))
+		page = follow_trans_huge_pmd(vma, addr, pmd, FOLL_DUMP);
+	else if (pmd_devmap(*pmd)) {
+		struct dev_pagemap *pgmap;
+
+		pgmap = get_dev_pagemap(pmd_pfn(*pmd), NULL);
+		if (!pgmap)
+			return;
+		page = pmd_page(*pmd);
+		smaps_account_dax_huge(mss, page, PMD_SIZE, pmd_young(*pmd),
+			pmd_dirty(*pmd));
+		return;
+	}
 	if (IS_ERR_OR_NULL(page))
 		return;
 	if (PageAnon(page))
-- 
1.8.3.1

Re: [PATCH v4] Add /proc/PID/smaps support for DAX

[Dan Williams]

On Wed, Oct 25, 2017 at 10:13 PM, Fan Du <fan.du@intel.com> wrote:
>
> Memory behind device DAX is not attached into normal memory
> management system, when user mmap /dev/dax, smaps part is
> currently missing, so no idea for user to check how much
> device DAX memory are actually used in practice.
>
> Whether vma is backed up by normal page,huge page, or both
> at the same time, this makes no difference for device DAX
> user so far.
>
> Using existing smaps structure is enough to do the job, so
> this patch tries to use existing RSS/PSS stuff for statistics.
> An example reading is like this:
> ----------------------------------------------------
> 7f30fe200000-7f3102200000 rw-s 00000000 00:06 19567                      /dev/dax12.0
> Size:              65536 kB
> KernelPageSize:        4 kB
> MMUPageSize:           4 kB
> Rss:               65536 kB
> Pss:               65536 kB
> Shared_Clean:          0 kB
> Shared_Dirty:          0 kB
> Private_Clean:         0 kB
> Private_Dirty:     65536 kB
> Referenced:        65536 kB
> Anonymous:             0 kB
> LazyFree:              0 kB
> AnonHugePages:         0 kB
> ShmemPmdMapped:        0 kB
> Shared_Hugetlb:        0 kB
> Private_Hugetlb:       0 kB
> Swap:                  0 kB
> SwapPss:               0 kB
> Locked:            65536 kB
> ProtectionKey:         0
> VmFlags: rd wr sh mr mw me ms mm hg
>
> Signed-off-by: Fan Du <fan.du@intel.com>
> ---
> v4:
> * Merge device DAX readings into existing smap counters
>   for simplicity.
>
> v3:
> * Elaborate more about the usage suggested by Michal Hocko
>
> v2:
> * Using pte_devmap to check valid pfn page structure,
>   Pointed out by Dan. thx!
>  fs/proc/task_mmu.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 72 insertions(+), 2 deletions(-)
>
> diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
> index 5589b4b..9b2d3e6 100644
> --- a/fs/proc/task_mmu.c
> +++ b/fs/proc/task_mmu.c
> @@ -507,6 +507,55 @@ static void smaps_account(struct mem_size_stats *mss, struct page *page,
>         }
>  }
>
> +/* page structure behind DAX mappings is NOT compound page
> + * when it's a huge page mappings, so introduce new API to
> + * account for both PMD and PUD mapping.
> + */
> +static void smaps_account_dax_huge(struct mem_size_stats *mss,
> +                       struct page *page, unsigned long size, bool young, bool dirty)
> +{
> +       int mapcount = page_mapcount(page);
> +
> +       if (PageAnon(page)) {
> +               mss->anonymous += size;
> +               if (!PageSwapBacked(page) && !dirty && !PageDirty(page))
> +                       mss->lazyfree += size;
> +       }
> +
> +       mss->resident += size;
> +       /* Accumulate the size in pages that have been accessed. */
> +       if (young || page_is_young(page) || PageReferenced(page))
> +               mss->referenced += size;
> +
> +       /*
> +        * page_count(page) == 1 guarantees the page is mapped exactly once.
> +        * If any subpage of the compound page mapped with PTE it would elevate
> +        * page_count().
> +        */
> +       if (page_count(page) == 1) {
> +               if (dirty || PageDirty(page))
> +                       mss->private_dirty += size;
> +               else
> +                       mss->private_clean += size;
> +               mss->pss += (u64)size << PSS_SHIFT;
> +               return;
> +       }
> +
> +       if (mapcount >= 2) {
> +               if (dirty || PageDirty(page))
> +                       mss->shared_dirty += size;
> +               else
> +                       mss->shared_clean += size;
> +               mss->pss += (size << PSS_SHIFT) / mapcount;
> +       } else {
> +               if (dirty || PageDirty(page))
> +                       mss->private_dirty += size;
> +               else
> +                       mss->private_clean += size;
> +               mss->pss += size << PSS_SHIFT;
> +       }
> +}
> +
>  #ifdef CONFIG_SHMEM
>  static int smaps_pte_hole(unsigned long addr, unsigned long end,
>                 struct mm_walk *walk)
> @@ -528,7 +577,16 @@ static void smaps_pte_entry(pte_t *pte, unsigned long addr,
>         struct page *page = NULL;
>
>         if (pte_present(*pte)) {
> -               page = vm_normal_page(vma, addr, *pte);
> +               if (!vma_is_dax(vma))
> +                       page = vm_normal_page(vma, addr, *pte);
> +               else if (pte_devmap(*pte)) {
> +                       struct dev_pagemap *pgmap;
> +
> +                       pgmap = get_dev_pagemap(pte_pfn(*pte), NULL);

Where do you do the put_dev_pagemap?

Re: [PATCH v4] Add /proc/PID/smaps support for DAX

[Dave Hansen]

I'm honestly not understanding what problem this solves.  Could you,
perhaps, do a before and after of smaps with and without this patch?

> +/* page structure behind DAX mappings is NOT compound page
> + * when it's a huge page mappings, so introduce new API to
> + * account for both PMD and PUD mapping.
> + */

Why do they need to be compound?  Why don't we just make them compound
instead of adding all this code which is *just* for DAX?

> +static void smaps_account_dax_huge(struct mem_size_stats *mss,
> +			struct page *page, unsigned long size, bool young, bool dirty)
> +{
> +	int mapcount = page_mapcount(page);
> +
> +	if (PageAnon(page)) {
> +		mss->anonymous += size;
> +		if (!PageSwapBacked(page) && !dirty && !PageDirty(page))
> +			mss->lazyfree += size;
> +	}

How can you have DAX anonymous huge pages?

> +	mss->resident += size;
> +	/* Accumulate the size in pages that have been accessed. */
> +	if (young || page_is_young(page) || PageReferenced(page))
> +		mss->referenced += size;

Isn't this just a copy'n'paste of smaps_account() code?

> +	/*
> +	 * page_count(page) == 1 guarantees the page is mapped exactly once.
> +	 * If any subpage of the compound page mapped with PTE it would elevate
> +	 * page_count().
> +	 */
> +	if (page_count(page) == 1) {
> +		if (dirty || PageDirty(page))
> +			mss->private_dirty += size;
> +		else
> +			mss->private_clean += size;
> +		mss->pss += (u64)size << PSS_SHIFT;
> +		return;
> +	}

PSS makes *zero* sense for DAX.  The "memory" is used whether the
mapping exists or not.

Also, the idea of "private" doesn't really make sense here.

> +	if (mapcount >= 2) {
> +		if (dirty || PageDirty(page))
> +			mss->shared_dirty += size;
> +		else
> +			mss->shared_clean += size;
> +		mss->pss += (size << PSS_SHIFT) / mapcount;
> +	} else {
> +		if (dirty || PageDirty(page))
> +			mss->private_dirty += size;
> +		else
> +			mss->private_clean += size;
> +		mss->pss += size << PSS_SHIFT;
> +	}
> +}
> +
>  #ifdef CONFIG_SHMEM
>  static int smaps_pte_hole(unsigned long addr, unsigned long end,
>  		struct mm_walk *walk)
> @@ -528,7 +577,16 @@ static void smaps_pte_entry(pte_t *pte, unsigned long addr,
>  	struct page *page = NULL;
>  
>  	if (pte_present(*pte)) {
> -		page = vm_normal_page(vma, addr, *pte);
> +		if (!vma_is_dax(vma))
> +			page = vm_normal_page(vma, addr, *pte);
> +		else if (pte_devmap(*pte)) {
> +			struct dev_pagemap *pgmap;
> +
> +			pgmap = get_dev_pagemap(pte_pfn(*pte), NULL);
> +			if (!pgmap)
> +				return;
> +			page = pte_page(*pte);
> +		}
>  	} else if (is_swap_pte(*pte)) {
>  		swp_entry_t swpent = pte_to_swp_entry(*pte);
>  
> @@ -579,7 +637,19 @@ static void smaps_pmd_entry(pmd_t *pmd, unsigned long addr,
>  	struct page *page;
>  
>  	/* FOLL_DUMP will return -EFAULT on huge zero page */
> -	page = follow_trans_huge_pmd(vma, addr, pmd, FOLL_DUMP);
> +	if (!vma_is_dax(vma))
> +		page = follow_trans_huge_pmd(vma, addr, pmd, FOLL_DUMP);
> +	else if (pmd_devmap(*pmd)) {
> +		struct dev_pagemap *pgmap;
> +
> +		pgmap = get_dev_pagemap(pmd_pfn(*pmd), NULL);
> +		if (!pgmap)
> +			return;
> +		page = pmd_page(*pmd);
> +		smaps_account_dax_huge(mss, page, PMD_SIZE, pmd_young(*pmd),
> +			pmd_dirty(*pmd));
> +		return;
> +	}
>  	if (IS_ERR_OR_NULL(page))
>  		return;
>  	if (PageAnon(page))
> 

There's a fair amount of copying and pasting going on here.  There is,
again, a bunch of specialized DAX code.  Isn't there a way to do this
more generically?

Re: [PATCH 2/2] Add /proc/PID/{smaps, numa_maps} support for DAX

[Michal Hocko]

On Wed 25-10-17 10:14:34, Dave Hansen wrote:
> On 10/25/2017 02:30 AM, Michal Hocko wrote:
> >>
> >> 7f6c17800000-7f6c17e00000 rw-s 00000000 00:06 20559  /dev/dax12.0
> >> Size:               6144 kB
> >> .
> >> .
> >> .
> >> Ptes@2MB:      		6144 kB
> > This says how but it doesn't tell why and who is going to use the
> > information and what for.
> 
> The original motivation was for DAX.  They have parallel large page
> infrastructure separate from hugetlbfs and THP.  Their constraints about
> when they can use large pages differ from the normal mm cases, so it is
> hard to tell when large pages are in use.  For instance, the file on
> *disk* has to be 2MB contiguous and aligned to map with 2MB pages even
> if the mmap() address is >2MB and 2MB-aligned.

I assume there is some tool which is going to use this information?

> But, in general, this seems like the thing that we probably should have
> done in the first place for THP.  It's a lot more generic and does not
> require someone reading the file to know what the particular
> architecture's page sizes are.

I fully agree. This just shows how single usecase focus driven smaps
file was. That is why I am asking about usecases when somebody want to
try yet another special field there. Smaps has become a dump of of
special cases which is not really easy to understand and so people tend
to use it incorrectly.

-- 
Michal Hocko
SUSE Labs

Re: [PATCHv3 1/2] proc: mm: export PTE sizes directly in smaps

[Michal Hocko]

On Thu 26-10-17 01:41:26, Du, Fan wrote:
> 
> 
> >-----Original Message-----
> >From: Michal Hocko [mailto:mhocko@kernel.org]
> >Sent: Wednesday, October 25, 2017 5:29 PM
> >To: Du, Fan <fan.du@intel.com>
> >Cc: akpm@linux-foundation.org; hch@lst.de; Williams, Dan J
> ><dan.j.williams@intel.com>; Hansen, Dave <dave.hansen@intel.com>;
> >linux-kernel@vger.kernel.org; linux-api@vger.kernel.org
> >Subject: Re: [PATCHv3 1/2] proc: mm: export PTE sizes directly in smaps
> >
> >On Wed 25-10-17 08:27:34, Fan Du wrote:
> >> From: Dave Hansen <dave.hansen@intel.com>
> >>
> >> /proc/$pid/smaps has a number of fields that are intended to imply the
> >> kinds of PTEs used to map memory.  "AnonHugePages" obviously tells you
> >> how many PMDs are being used.  "MMUPageSize" along with the
> >"Hugetlb"
> >> fields tells you how many PTEs you have for a huge page.
> >>
> >> The current mechanisms work fine when we have one or two page sizes.
> >> But, they start to get a bit muddled when we mix page sizes inside
> >> one VMA.  For instance, the DAX folks were proposing adding a set of
> >> fields like:
> >>
> >> 	DevicePages:
> >> 	DeviceHugePages:
> >> 	DeviceGiganticPages:
> >> 	DeviceGinormousPages:
> >>
> >> to unmuddle things when page sizes get mixed.  That's fine, but
> >> it does require userspace know the mapping from our various
> >> arbitrary names to hardware page sizes on each architecture and
> >> kernel configuration.  That seems rather suboptimal.
> >>
> >> What folks really want is to know how much memory is mapped with
> >> each page size.  How about we just do *that* instead?
> >>
> >> Patch attached.  Seems harmless enough.  Seems to compile on a
> >> bunch of random architectures.  Makes smaps look like this:
> >>
> >> Private_Hugetlb:       0 kB
> >> Swap:                  0 kB
> >> SwapPss:               0 kB
> >> KernelPageSize:        4 kB
> >> MMUPageSize:           4 kB
> >> Locked:                0 kB
> >> Ptes@4kB:	      32 kB
> >> Ptes@2MB:	    2048 kB
> >
> >Yes, I agree that the current situation is quite messy. But I am
> >wondering who is going to use this new information and what for?
> 
> It comes from my customer who are using Device DAX, looking for any statistics
> of how much persistent memory mapping has been created, or used by application.

How is this information then used? Just displayed or somebody can make
decisions based on those numbers? Please be more specific about the
usecase.

> Current vm_normal_page implementation doesn't pick up page with DEVMAP pfn.
> The second patch fix this and export DAX mappings into counters introduced in the
> first patch.
> 
> IMO, the user care more about how much persistent memory they used, how about
> a small tweak with smaps_account, and report the total mapping size into RSS/PSS,
> which user are usually more familiar with?

No! Rss and pss is already used by many tools to evaluate misbehaving
tasks. If you start accounting the memory which is not bound to the
process life time then you can break those usecases. This is the reason
why hugetlb is not accounted to rss as well.

-- 
Michal Hocko
SUSE Labs

Re: [PATCH 2/2] Add /proc/PID/{smaps, numa_maps} support for DAX

[Dave Hansen]

On 10/26/2017 07:16 AM, Michal Hocko wrote:
>> The original motivation was for DAX.  They have parallel large page
>> infrastructure separate from hugetlbfs and THP.  Their constraints about
>> when they can use large pages differ from the normal mm cases, so it is
>> hard to tell when large pages are in use.  For instance, the file on
>> *disk* has to be 2MB contiguous and aligned to map with 2MB pages even
>> if the mmap() address is >2MB and 2MB-aligned.
> 
> I assume there is some tool which is going to use this information?

Actually, I don't remember whether it was tooling or just confused
humans.  I *think* Dan was trying to write test cases for huge page DAX
support and couldn't figure out whether or not it was using large pages.

>> But, in general, this seems like the thing that we probably should have
>> done in the first place for THP.  It's a lot more generic and does not
>> require someone reading the file to know what the particular
>> architecture's page sizes are.
> 
> I fully agree. This just shows how single usecase focus driven smaps
> file was. That is why I am asking about usecases when somebody want to
> try yet another special field there. Smaps has become a dump of of
> special cases which is not really easy to understand and so people tend
> to use it incorrectly.

We just have to be careful not to cram use-cases into the existing
fields which might make them meaningless.  I fear that Fan Du's latest
patches do that.

Re: [PATCHv3 1/2] proc: mm: export PTE sizes directly in smaps

[Dave Hansen]

On 10/26/2017 07:19 AM, Michal Hocko wrote:
>> Current vm_normal_page implementation doesn't pick up page with DEVMAP pfn.
>> The second patch fix this and export DAX mappings into counters introduced in the
>> first patch.
>>
>> IMO, the user care more about how much persistent memory they used, how about
>> a small tweak with smaps_account, and report the total mapping size into RSS/PSS,
>> which user are usually more familiar with?
> No! Rss and pss is already used by many tools to evaluate misbehaving
> tasks. If you start accounting the memory which is not bound to the
> process life time then you can break those usecases. This is the reason
> why hugetlb is not accounted to rss as well.

Yeah, folks (rightly) assume Rss is memory and eaten from MemTotal.  DAX
mappings do not use RAM.

Re: [PATCH 2/2] Add /proc/PID/{smaps, numa_maps} support for DAX

[Michal Hocko]

On Thu 26-10-17 07:24:14, Dave Hansen wrote:
> On 10/26/2017 07:16 AM, Michal Hocko wrote:
> >> The original motivation was for DAX.  They have parallel large page
> >> infrastructure separate from hugetlbfs and THP.  Their constraints about
> >> when they can use large pages differ from the normal mm cases, so it is
> >> hard to tell when large pages are in use.  For instance, the file on
> >> *disk* has to be 2MB contiguous and aligned to map with 2MB pages even
> >> if the mmap() address is >2MB and 2MB-aligned.
> > 
> > I assume there is some tool which is going to use this information?
> 
> Actually, I don't remember whether it was tooling or just confused
> humans.  I *think* Dan was trying to write test cases for huge page DAX
> support and couldn't figure out whether or not it was using large pages.

That sounds like a very weak justification to adding new stuff to smaps
to be honest.

> >> But, in general, this seems like the thing that we probably should have
> >> done in the first place for THP.  It's a lot more generic and does not
> >> require someone reading the file to know what the particular
> >> architecture's page sizes are.
> > 
> > I fully agree. This just shows how single usecase focus driven smaps
> > file was. That is why I am asking about usecases when somebody want to
> > try yet another special field there. Smaps has become a dump of of
> > special cases which is not really easy to understand and so people tend
> > to use it incorrectly.
> 
> We just have to be careful not to cram use-cases into the existing
> fields which might make them meaningless.  I fear that Fan Du's latest
> patches do that.

Not only that. There have been reports that reading smaps is too
expensive. Curiously enough the overhead doesn't come up from
the data collection but rather copying to the userspace. So we should be
careful to not print data that is not of general use.

-- 
Michal Hocko
SUSE Labs

Re: [PATCH 2/2] Add /proc/PID/{smaps, numa_maps} support for DAX

[Dave Hansen]

On 10/26/2017 07:31 AM, Michal Hocko wrote:
> On Thu 26-10-17 07:24:14, Dave Hansen wrote:
>> Actually, I don't remember whether it was tooling or just confused
>> humans.  I *think* Dan was trying to write test cases for huge page DAX
>> support and couldn't figure out whether or not it was using large pages.
> 
> That sounds like a very weak justification to adding new stuff to smaps
> to be honest.

Yep, agreed.  It can't go in _just_ for DAX, and Fan and the other DAX
folks need to elaborate on their needs here.

Do you have any better ideas?  If we did this, we could probably make an
argument that the AnonHuge fields could go away some day.  They haven't
always been there.

The only other alternative I can think of are truly DAX-specific
interfaces, which also seem like a really bad idea.

> Not only that. There have been reports that reading smaps is too
> expensive. Curiously enough the overhead doesn't come up from
> the data collection but rather copying to the userspace. So we should be
> careful to not print data that is not of general use.

Yikes!  I just did a quick:

	while true; do cat /proc/*/smaps | wc ; done

and the copying out to userspace is ~1/15th the overhead of
smaps_account().  Something sounds screwy if you're seeing the overhead
at copying to userspace.

What else can we do than continue to bloat smaps?  Could we do a file
per VMA?

	/proc/$pid/smap/0x123000-0x456000

Re: [PATCH 2/2] Add /proc/PID/{smaps, numa_maps} support for DAX

[Michal Hocko]

On Thu 26-10-17 07:51:20, Dave Hansen wrote:
> On 10/26/2017 07:31 AM, Michal Hocko wrote:
> > On Thu 26-10-17 07:24:14, Dave Hansen wrote:
> >> Actually, I don't remember whether it was tooling or just confused
> >> humans.  I *think* Dan was trying to write test cases for huge page DAX
> >> support and couldn't figure out whether or not it was using large pages.
> > 
> > That sounds like a very weak justification to adding new stuff to smaps
> > to be honest.
> 
> Yep, agreed.  It can't go in _just_ for DAX, and Fan and the other DAX
> folks need to elaborate on their needs here.
> 
> Do you have any better ideas?  If we did this, we could probably make an
> argument that the AnonHuge fields could go away some day.  They haven't
> always been there.

Yeah, if there is an effective way to see large mappings within the
range then AnonHuge should probably go away. If that is possible due to
userspace regressions...

> The only other alternative I can think of are truly DAX-specific
> interfaces, which also seem like a really bad idea.

Well, if this is mostly for debugging purposes then why not?
 
> > Not only that. There have been reports that reading smaps is too
> > expensive. Curiously enough the overhead doesn't come up from
> > the data collection but rather copying to the userspace. So we should be
> > careful to not print data that is not of general use.
> 
> Yikes!  I just did a quick:
> 
> 	while true; do cat /proc/*/smaps | wc ; done
> 
> and the copying out to userspace is ~1/15th the overhead of
> smaps_account().  Something sounds screwy if you're seeing the overhead
> at copying to userspace.

Yeah. I have looked into this some time ago and managed to cut some of
it by using dedicated seq_* functions rather than seq_printf which seems
to be quite expensive. But I haven't spent too much time on it.

> What else can we do than continue to bloat smaps?  Could we do a file
> per VMA?
> 
> 	/proc/$pid/smap/0x123000-0x456000

Wouldn't that be too volatile? I mean things can change considerably
between readdir and readfile... But I confess I haven't thought that
through.
-- 
Michal Hocko
SUSE Labs

Re: [PATCH 2/2] Add /proc/PID/{smaps, numa_maps} support for DAX

[Dan Williams]

On Thu, Oct 26, 2017 at 8:07 AM, Michal Hocko <mhocko@kernel.org> wrote:
> On Thu 26-10-17 07:51:20, Dave Hansen wrote:
>> On 10/26/2017 07:31 AM, Michal Hocko wrote:
>> > On Thu 26-10-17 07:24:14, Dave Hansen wrote:
>> >> Actually, I don't remember whether it was tooling or just confused
>> >> humans.  I *think* Dan was trying to write test cases for huge page DAX
>> >> support and couldn't figure out whether or not it was using large pages.
>> >
>> > That sounds like a very weak justification to adding new stuff to smaps
>> > to be honest.
>>
>> Yep, agreed.  It can't go in _just_ for DAX, and Fan and the other DAX
>> folks need to elaborate on their needs here.
>>
>> Do you have any better ideas?  If we did this, we could probably make an
>> argument that the AnonHuge fields could go away some day.  They haven't
>> always been there.
>
> Yeah, if there is an effective way to see large mappings within the
> range then AnonHuge should probably go away. If that is possible due to
> userspace regressions...
>
>> The only other alternative I can think of are truly DAX-specific
>> interfaces, which also seem like a really bad idea.
>
> Well, if this is mostly for debugging purposes then why not?

I should have recalled this sooner, but for device-dax we don't need
smaps support because the mapping type is enforced by the device. I.e.
if you set the alignment to 2MB you are guaranteed to either get PMD
mappings or SIGBUS. Filesystem DAX is where things are more dynamic,
but because they are dynamic smaps is only an ephemeral answer.

RE: [PATCH v4] Add /proc/PID/smaps support for DAX

[Du, Fan]

>-----Original Message-----
>From: Hansen, Dave
>Sent: Thursday, October 26, 2017 10:03 PM
>To: Du, Fan <fan.du@intel.com>; akpm@linux-foundation.org; hch@lst.de;
>Williams, Dan J <dan.j.williams@intel.com>; mhocko@kernel.org
>Cc: linux-kernel@vger.kernel.org
>Subject: Re: [PATCH v4] Add /proc/PID/smaps support for DAX
>
>I'm honestly not understanding what problem this solves.  Could you,
>perhaps, do a before and after of smaps with and without this patch?

The motivation here is described in the commit message.
------------------------------------------------------------------------------------------
Memory behind device DAX is not attached into normal memory
management system, when user mmap /dev/dax, smaps part is
currently missing, so no idea for user to check how much
device DAX memory are actually used in practice.
------------------------------------------------------------------------------------------


>> +/* page structure behind DAX mappings is NOT compound page
>> + * when it's a huge page mappings, so introduce new API to
>> + * account for both PMD and PUD mapping.
>> + */
>
>Why do they need to be compound?  Why don't we just make them
>compound
>instead of adding all this code which is *just* for DAX?
>
>> +static void smaps_account_dax_huge(struct mem_size_stats *mss,
>> +			struct page *page, unsigned long size, bool young, bool dirty)
>> +{
>> +	int mapcount = page_mapcount(page);
>> +
>> +	if (PageAnon(page)) {
>> +		mss->anonymous += size;
>> +		if (!PageSwapBacked(page) && !dirty && !PageDirty(page))
>> +			mss->lazyfree += size;
>> +	}
>
>How can you have DAX anonymous huge pages?
>
>> +	mss->resident += size;
>> +	/* Accumulate the size in pages that have been accessed. */
>> +	if (young || page_is_young(page) || PageReferenced(page))
>> +		mss->referenced += size;
>
>Isn't this just a copy'n'paste of smaps_account() code?
>
>> +	/*
>> +	 * page_count(page) == 1 guarantees the page is mapped exactly once.
>> +	 * If any subpage of the compound page mapped with PTE it would
>elevate
>> +	 * page_count().
>> +	 */
>> +	if (page_count(page) == 1) {
>> +		if (dirty || PageDirty(page))
>> +			mss->private_dirty += size;
>> +		else
>> +			mss->private_clean += size;
>> +		mss->pss += (u64)size << PSS_SHIFT;
>> +		return;
>> +	}
>
>PSS makes *zero* sense for DAX.  The "memory" is used whether the
>mapping exists or not.
>
>Also, the idea of "private" doesn't really make sense here.
>
>> +	if (mapcount >= 2) {
>> +		if (dirty || PageDirty(page))
>> +			mss->shared_dirty += size;
>> +		else
>> +			mss->shared_clean += size;
>> +		mss->pss += (size << PSS_SHIFT) / mapcount;
>> +	} else {
>> +		if (dirty || PageDirty(page))
>> +			mss->private_dirty += size;
>> +		else
>> +			mss->private_clean += size;
>> +		mss->pss += size << PSS_SHIFT;
>> +	}
>> +}
>> +
>>  #ifdef CONFIG_SHMEM
>>  static int smaps_pte_hole(unsigned long addr, unsigned long end,
>>  		struct mm_walk *walk)
>> @@ -528,7 +577,16 @@ static void smaps_pte_entry(pte_t *pte, unsigned
>long addr,
>>  	struct page *page = NULL;
>>
>>  	if (pte_present(*pte)) {
>> -		page = vm_normal_page(vma, addr, *pte);
>> +		if (!vma_is_dax(vma))
>> +			page = vm_normal_page(vma, addr, *pte);
>> +		else if (pte_devmap(*pte)) {
>> +			struct dev_pagemap *pgmap;
>> +
>> +			pgmap = get_dev_pagemap(pte_pfn(*pte), NULL);
>> +			if (!pgmap)
>> +				return;
>> +			page = pte_page(*pte);
>> +		}
>>  	} else if (is_swap_pte(*pte)) {
>>  		swp_entry_t swpent = pte_to_swp_entry(*pte);
>>
>> @@ -579,7 +637,19 @@ static void smaps_pmd_entry(pmd_t *pmd,
>unsigned long addr,
>>  	struct page *page;
>>
>>  	/* FOLL_DUMP will return -EFAULT on huge zero page */
>> -	page = follow_trans_huge_pmd(vma, addr, pmd, FOLL_DUMP);
>> +	if (!vma_is_dax(vma))
>> +		page = follow_trans_huge_pmd(vma, addr, pmd, FOLL_DUMP);
>> +	else if (pmd_devmap(*pmd)) {
>> +		struct dev_pagemap *pgmap;
>> +
>> +		pgmap = get_dev_pagemap(pmd_pfn(*pmd), NULL);
>> +		if (!pgmap)
>> +			return;
>> +		page = pmd_page(*pmd);
>> +		smaps_account_dax_huge(mss, page, PMD_SIZE, pmd_young(*pmd),
>> +			pmd_dirty(*pmd));
>> +		return;
>> +	}
>>  	if (IS_ERR_OR_NULL(page))
>>  		return;
>>  	if (PageAnon(page))
>>
>
>There's a fair amount of copying and pasting going on here.  There is,
>again, a bunch of specialized DAX code.  Isn't there a way to do this
>more generically?

RE: [PATCH v4] Add /proc/PID/smaps support for DAX

[Du, Fan]

>-----Original Message-----
>From: linux-kernel-owner@vger.kernel.org
>[mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Dan Williams
>Sent: Thursday, October 26, 2017 5:17 PM
>To: Du, Fan <fan.du@intel.com>
>Cc: Andrew Morton <akpm@linux-foundation.org>; Christoph Hellwig
><hch@lst.de>; Hansen, Dave <dave.hansen@intel.com>; Michal Hocko
><mhocko@kernel.org>; linux-kernel@vger.kernel.org
>Subject: Re: [PATCH v4] Add /proc/PID/smaps support for DAX
>
>On Wed, Oct 25, 2017 at 10:13 PM, Fan Du <fan.du@intel.com> wrote:
>>
>> Memory behind device DAX is not attached into normal memory
>> management system, when user mmap /dev/dax, smaps part is
>> currently missing, so no idea for user to check how much
>> device DAX memory are actually used in practice.
>>
>> Whether vma is backed up by normal page,huge page, or both
>> at the same time, this makes no difference for device DAX
>> user so far.
>>
>> Using existing smaps structure is enough to do the job, so
>> this patch tries to use existing RSS/PSS stuff for statistics.
>> An example reading is like this:
>> ----------------------------------------------------
>> 7f30fe200000-7f3102200000 rw-s 00000000 00:06 19567
>/dev/dax12.0
>> Size:              65536 kB
>> KernelPageSize:        4 kB
>> MMUPageSize:           4 kB
>> Rss:               65536 kB
>> Pss:               65536 kB
>> Shared_Clean:          0 kB
>> Shared_Dirty:          0 kB
>> Private_Clean:         0 kB
>> Private_Dirty:     65536 kB
>> Referenced:        65536 kB
>> Anonymous:             0 kB
>> LazyFree:              0 kB
>> AnonHugePages:         0 kB
>> ShmemPmdMapped:        0 kB
>> Shared_Hugetlb:        0 kB
>> Private_Hugetlb:       0 kB
>> Swap:                  0 kB
>> SwapPss:               0 kB
>> Locked:            65536 kB
>> ProtectionKey:         0
>> VmFlags: rd wr sh mr mw me ms mm hg
>>
>> Signed-off-by: Fan Du <fan.du@intel.com>
>> ---
>> v4:
>> * Merge device DAX readings into existing smap counters
>>   for simplicity.
>>
>> v3:
>> * Elaborate more about the usage suggested by Michal Hocko
>>
>> v2:
>> * Using pte_devmap to check valid pfn page structure,
>>   Pointed out by Dan. thx!
>>  fs/proc/task_mmu.c | 74
>++++++++++++++++++++++++++++++++++++++++++++++++++++--
>>  1 file changed, 72 insertions(+), 2 deletions(-)
>>
>> diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
>> index 5589b4b..9b2d3e6 100644
>> --- a/fs/proc/task_mmu.c
>> +++ b/fs/proc/task_mmu.c
>> @@ -507,6 +507,55 @@ static void smaps_account(struct mem_size_stats
>*mss, struct page *page,
>>         }
>>  }
>>
>> +/* page structure behind DAX mappings is NOT compound page
>> + * when it's a huge page mappings, so introduce new API to
>> + * account for both PMD and PUD mapping.
>> + */
>> +static void smaps_account_dax_huge(struct mem_size_stats *mss,
>> +                       struct page *page, unsigned long size, bool
>young, bool dirty)
>> +{
>> +       int mapcount = page_mapcount(page);
>> +
>> +       if (PageAnon(page)) {
>> +               mss->anonymous += size;
>> +               if (!PageSwapBacked(page) && !dirty
>&& !PageDirty(page))
>> +                       mss->lazyfree += size;
>> +       }
>> +
>> +       mss->resident += size;
>> +       /* Accumulate the size in pages that have been accessed. */
>> +       if (young || page_is_young(page) || PageReferenced(page))
>> +               mss->referenced += size;
>> +
>> +       /*
>> +        * page_count(page) == 1 guarantees the page is mapped exactly
>once.
>> +        * If any subpage of the compound page mapped with PTE it
>would elevate
>> +        * page_count().
>> +        */
>> +       if (page_count(page) == 1) {
>> +               if (dirty || PageDirty(page))
>> +                       mss->private_dirty += size;
>> +               else
>> +                       mss->private_clean += size;
>> +               mss->pss += (u64)size << PSS_SHIFT;
>> +               return;
>> +       }
>> +
>> +       if (mapcount >= 2) {
>> +               if (dirty || PageDirty(page))
>> +                       mss->shared_dirty += size;
>> +               else
>> +                       mss->shared_clean += size;
>> +               mss->pss += (size << PSS_SHIFT) / mapcount;
>> +       } else {
>> +               if (dirty || PageDirty(page))
>> +                       mss->private_dirty += size;
>> +               else
>> +                       mss->private_clean += size;
>> +               mss->pss += size << PSS_SHIFT;
>> +       }
>> +}
>> +
>>  #ifdef CONFIG_SHMEM
>>  static int smaps_pte_hole(unsigned long addr, unsigned long end,
>>                 struct mm_walk *walk)
>> @@ -528,7 +577,16 @@ static void smaps_pte_entry(pte_t *pte, unsigned
>long addr,
>>         struct page *page = NULL;
>>
>>         if (pte_present(*pte)) {
>> -               page = vm_normal_page(vma, addr, *pte);
>> +               if (!vma_is_dax(vma))
>> +                       page = vm_normal_page(vma, addr, *pte);
>> +               else if (pte_devmap(*pte)) {
>> +                       struct dev_pagemap *pgmap;
>> +
>> +                       pgmap = get_dev_pagemap(pte_pfn(*pte),
>NULL);
>
>Where do you do the put_dev_pagemap?

Oops, my bad :(
will fix this in next version.

RE: [PATCH 2/2] Add /proc/PID/{smaps, numa_maps} support for DAX

[Du, Fan]

>-----Original Message-----
>From: linux-kernel-owner@vger.kernel.org
>[mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Dave Hansen
>Sent: Thursday, October 26, 2017 10:51 PM
>To: Michal Hocko <mhocko@kernel.org>
>Cc: Du, Fan <fan.du@intel.com>; akpm@linux-foundation.org; hch@lst.de;
>Williams, Dan J <dan.j.williams@intel.com>; linux-kernel@vger.kernel.org;
>linux-api@vger.kernel.org
>Subject: Re: [PATCH 2/2] Add /proc/PID/{smaps, numa_maps} support for DAX
>
>On 10/26/2017 07:31 AM, Michal Hocko wrote:
>> On Thu 26-10-17 07:24:14, Dave Hansen wrote:
>>> Actually, I don't remember whether it was tooling or just confused
>>> humans.  I *think* Dan was trying to write test cases for huge page DAX
>>> support and couldn't figure out whether or not it was using large pages.
>>
>> That sounds like a very weak justification to adding new stuff to smaps
>> to be honest.
>
>Yep, agreed.  It can't go in _just_ for DAX, and Fan and the other DAX
>folks need to elaborate on their needs here.

If user creates device DAX /dev/dax with some capacity like 512G, mmap it and
Use it will, or touched 128G. To my best knowledge at this part, there is no
statistics reported how much memory behind DAX actually used.

This is the problem our customer is facing right now.

I agree with smaps should make no special for DAX, whether or not we update
smaps for DAX, cat /proc/PID/smaps always report its part for /dev/dax.
The problem is should we report DAX usage by RSS, or introduce new fields
Like Pte@{4K,2M} for a another different purpose.

The v4 version tried to merged device DAX usage with RSS,
https://lkml.org/lkml/2017/10/26/24



>Do you have any better ideas?  If we did this, we could probably make an
>argument that the AnonHuge fields could go away some day.  They haven't
>always been there.
>
>The only other alternative I can think of are truly DAX-specific
>interfaces, which also seem like a really bad idea.
>
>> Not only that. There have been reports that reading smaps is too
>> expensive. Curiously enough the overhead doesn't come up from
>> the data collection but rather copying to the userspace. So we should be
>> careful to not print data that is not of general use.
>
>Yikes!  I just did a quick:
>
>	while true; do cat /proc/*/smaps | wc ; done
>
>and the copying out to userspace is ~1/15th the overhead of
>smaps_account().  Something sounds screwy if you're seeing the overhead
>at copying to userspace.
>
>What else can we do than continue to bloat smaps?  Could we do a file
>per VMA?
>
>	/proc/$pid/smap/0x123000-0x456000

Re: [PATCH v4] Add /proc/PID/smaps support for DAX

[Michal Hocko]

On Fri 27-10-17 02:47:43, Du, Fan wrote:
> 
> 
> >-----Original Message-----
> >From: Hansen, Dave
> >Sent: Thursday, October 26, 2017 10:03 PM
> >To: Du, Fan <fan.du@intel.com>; akpm@linux-foundation.org; hch@lst.de;
> >Williams, Dan J <dan.j.williams@intel.com>; mhocko@kernel.org
> >Cc: linux-kernel@vger.kernel.org
> >Subject: Re: [PATCH v4] Add /proc/PID/smaps support for DAX
> >
> >I'm honestly not understanding what problem this solves.  Could you,
> >perhaps, do a before and after of smaps with and without this patch?
> 
> The motivation here is described in the commit message.
> ------------------------------------------------------------------------------------------
> Memory behind device DAX is not attached into normal memory
> management system, when user mmap /dev/dax, smaps part is
> currently missing, so no idea for user to check how much
> device DAX memory are actually used in practice.

This might be motivation but you are still not explaining _why_ that is
a problem. _Who_ is going to use that information and for _what_
purpose. This is really essential!
-- 
Michal Hocko
SUSE Labs

RE: [PATCH v4] Add /proc/PID/smaps support for DAX

[Du, Fan]

>-----Original Message-----
>From: Michal Hocko [mailto:mhocko@kernel.org]
>Sent: Friday, October 27, 2017 4:08 PM
>To: Du, Fan <fan.du@intel.com>
>Cc: Hansen, Dave <dave.hansen@intel.com>; akpm@linux-foundation.org;
>hch@lst.de; Williams, Dan J <dan.j.williams@intel.com>;
>linux-kernel@vger.kernel.org
>Subject: Re: [PATCH v4] Add /proc/PID/smaps support for DAX
>
>On Fri 27-10-17 02:47:43, Du, Fan wrote:
>>
>>
>> >-----Original Message-----
>> >From: Hansen, Dave
>> >Sent: Thursday, October 26, 2017 10:03 PM
>> >To: Du, Fan <fan.du@intel.com>; akpm@linux-foundation.org; hch@lst.de;
>> >Williams, Dan J <dan.j.williams@intel.com>; mhocko@kernel.org
>> >Cc: linux-kernel@vger.kernel.org
>> >Subject: Re: [PATCH v4] Add /proc/PID/smaps support for DAX
>> >
>> >I'm honestly not understanding what problem this solves.  Could you,
>> >perhaps, do a before and after of smaps with and without this patch?
>>
>> The motivation here is described in the commit message.
>> ------------------------------------------------------------------------------------------
>> Memory behind device DAX is not attached into normal memory
>> management system, when user mmap /dev/dax, smaps part is
>> currently missing, so no idea for user to check how much
>> device DAX memory are actually used in practice.
>
>This might be motivation but you are still not explaining _why_ that is
>a problem. _Who_ is going to use that information and for _what_
>purpose. This is really essential!

If user created device DAX, how did one know how much memory being used?
by "used" I mean, page table mapping created, fact is no way to find out here.

why does this master? The answer is same as I bought 512G SSD disk, why
do I want to check disk usage with `df`?! if application use only 128G, it makes
no sense at all for me to buy more redundant persistent memory if Cloud provider
has more other option to choose.

Who cares the answers here? 
People who pays the money for persistent memory.


>Michal Hocko
>SUSE Labs

Re: [PATCH v4] Add /proc/PID/smaps support for DAX

[Michal Hocko]

On Fri 27-10-17 08:24:07, Du, Fan wrote:
> 
> 
> >-----Original Message-----
> >From: Michal Hocko [mailto:mhocko@kernel.org]
> >Sent: Friday, October 27, 2017 4:08 PM
> >To: Du, Fan <fan.du@intel.com>
> >Cc: Hansen, Dave <dave.hansen@intel.com>; akpm@linux-foundation.org;
> >hch@lst.de; Williams, Dan J <dan.j.williams@intel.com>;
> >linux-kernel@vger.kernel.org
> >Subject: Re: [PATCH v4] Add /proc/PID/smaps support for DAX
> >
> >On Fri 27-10-17 02:47:43, Du, Fan wrote:
> >>
> >>
> >> >-----Original Message-----
> >> >From: Hansen, Dave
> >> >Sent: Thursday, October 26, 2017 10:03 PM
> >> >To: Du, Fan <fan.du@intel.com>; akpm@linux-foundation.org; hch@lst.de;
> >> >Williams, Dan J <dan.j.williams@intel.com>; mhocko@kernel.org
> >> >Cc: linux-kernel@vger.kernel.org
> >> >Subject: Re: [PATCH v4] Add /proc/PID/smaps support for DAX
> >> >
> >> >I'm honestly not understanding what problem this solves.  Could you,
> >> >perhaps, do a before and after of smaps with and without this patch?
> >>
> >> The motivation here is described in the commit message.
> >> ------------------------------------------------------------------------------------------
> >> Memory behind device DAX is not attached into normal memory
> >> management system, when user mmap /dev/dax, smaps part is
> >> currently missing, so no idea for user to check how much
> >> device DAX memory are actually used in practice.
> >
> >This might be motivation but you are still not explaining _why_ that is
> >a problem. _Who_ is going to use that information and for _what_
> >purpose. This is really essential!
> 
> If user created device DAX, how did one know how much memory being used?
> by "used" I mean, page table mapping created, fact is no way to find out here.
> 
> why does this master? The answer is same as I bought 512G SSD disk, why
> do I want to check disk usage with `df`?! if application use only 128G, it makes
> no sense at all for me to buy more redundant persistent memory if Cloud provider
> has more other option to choose.

I am not deeply familiar with DAX but I would expect that most users
will use a FS on top of it where we have standard tools. If the use is
direct then I can see how this make things more complicated but smaps is
not the right answer IMHO. Why? Well, just consider that you map the
same portions of the device multiple times for whatever reason and you
are screwed because you have no means to distinguish those. So you will
get bogus numbers. Or am I misunderstanding something?

If you need a DAX device statistics then make them device specific. This
is the only reliable way to get valid data.
-- 
Michal Hocko
SUSE Labs

RE: [PATCH v4] Add /proc/PID/smaps support for DAX

[Du, Fan]

>-----Original Message-----
>From: Michal Hocko [mailto:mhocko@kernel.org]
>Sent: Friday, October 27, 2017 4:43 PM
>To: Du, Fan <fan.du@intel.com>
>Cc: Hansen, Dave <dave.hansen@intel.com>; akpm@linux-foundation.org;
>hch@lst.de; Williams, Dan J <dan.j.williams@intel.com>;
>linux-kernel@vger.kernel.org
>Subject: Re: [PATCH v4] Add /proc/PID/smaps support for DAX
>
>On Fri 27-10-17 08:24:07, Du, Fan wrote:
>>
>>
>> >-----Original Message-----
>> >From: Michal Hocko [mailto:mhocko@kernel.org]
>> >Sent: Friday, October 27, 2017 4:08 PM
>> >To: Du, Fan <fan.du@intel.com>
>> >Cc: Hansen, Dave <dave.hansen@intel.com>; akpm@linux-foundation.org;
>> >hch@lst.de; Williams, Dan J <dan.j.williams@intel.com>;
>> >linux-kernel@vger.kernel.org
>> >Subject: Re: [PATCH v4] Add /proc/PID/smaps support for DAX
>> >
>> >On Fri 27-10-17 02:47:43, Du, Fan wrote:
>> >>
>> >>
>> >> >-----Original Message-----
>> >> >From: Hansen, Dave
>> >> >Sent: Thursday, October 26, 2017 10:03 PM
>> >> >To: Du, Fan <fan.du@intel.com>; akpm@linux-foundation.org;
>hch@lst.de;
>> >> >Williams, Dan J <dan.j.williams@intel.com>; mhocko@kernel.org
>> >> >Cc: linux-kernel@vger.kernel.org
>> >> >Subject: Re: [PATCH v4] Add /proc/PID/smaps support for DAX
>> >> >
>> >> >I'm honestly not understanding what problem this solves.  Could you,
>> >> >perhaps, do a before and after of smaps with and without this patch?
>> >>
>> >> The motivation here is described in the commit message.
>> >> ------------------------------------------------------------------------------------------
>> >> Memory behind device DAX is not attached into normal memory
>> >> management system, when user mmap /dev/dax, smaps part is
>> >> currently missing, so no idea for user to check how much
>> >> device DAX memory are actually used in practice.
>> >
>> >This might be motivation but you are still not explaining _why_ that is
>> >a problem. _Who_ is going to use that information and for _what_
>> >purpose. This is really essential!
>>
>> If user created device DAX, how did one know how much memory being
>used?
>> by "used" I mean, page table mapping created, fact is no way to find out
>here.
>>
>> why does this master? The answer is same as I bought 512G SSD disk, why
>> do I want to check disk usage with `df`?! if application use only 128G, it
>makes
>> no sense at all for me to buy more redundant persistent memory if Cloud
>provider
>> has more other option to choose.
>
>I am not deeply familiar with DAX but I would expect that most users
>will use a FS on top of it where we have standard tools. If the use is
>direct then I can see how this make things more complicated but smaps is
>not the right answer IMHO. Why? Well, just consider that you map the
>same portions of the device multiple times for whatever reason and you
>are screwed because you have no means to distinguish those. So you will
>get bogus numbers. Or am I misunderstanding something?

Persistent memory has two user interfaces.
One is filesystem DAX, sitting on pmem block device, mounted with dax option to
by pass page cache, `df` could meets my customer needs.
The other is device DAX, where user could only mmap it to its address space,
No file system concept. That's why we need something equivalent with `df`.

Share mappings increase page mapcount, that's what PSS field for.
It will proportionate the total size, for example the library(2MB) used by two
processes, RSS will report 2MB plus each process own memory size,
where PSS report the proportionally one, 2MB/2(two processes
share the library, the page mapcount is 2) plus its own memory size.

Btw, smaps is the best place to be compatible with existing online monitoring tools
customer use now a days.

>If you need a DAX device statistics then make them device specific. This
>is the only reliable way to get valid data.

That's my first thought though, create another sys node for this,
Where smaps fields has ZERO readings as following without this patch.
22 lines of meaningless metrics here w.r.t device DAX.

7f6c00000000-7f6d80000000 rw-s 00000000 00:06 19810                      /dev/dax12.0
Size:            6291456 kB
KernelPageSize:        4 kB
MMUPageSize:           4 kB
Rss:                   0 kB
Pss:                   0 kB
Shared_Clean:          0 kB
Shared_Dirty:          0 kB
Private_Clean:         0 kB
Private_Dirty:         0 kB
Referenced:            0 kB
Anonymous:             0 kB
LazyFree:              0 kB
AnonHugePages:         0 kB
ShmemPmdMapped:        0 kB
Shared_Hugetlb:        0 kB
Private_Hugetlb:       0 kB
Swap:                  0 kB
SwapPss:               0 kB
Locked:                0 kB
ProtectionKey:         0
VmFlags: rd wr sh mr mw me ms mm hg

Last but not least, this fix does not populate smaps structure, it only shows
useful data for /dev/dax at RSS/PSS, and does not impact statistics other than
device DAX at all.

I have used all my English words I know to convince you, so be it.

>--
>Michal Hocko
>SUSE Labs

Re: [PATCH v4] Add /proc/PID/smaps support for DAX

[Michal Hocko]

On Fri 27-10-17 09:03:12, Du, Fan wrote:
[...]
> >I am not deeply familiar with DAX but I would expect that most users
> >will use a FS on top of it where we have standard tools. If the use is
> >direct then I can see how this make things more complicated but smaps is
> >not the right answer IMHO. Why? Well, just consider that you map the
> >same portions of the device multiple times for whatever reason and you
> >are screwed because you have no means to distinguish those. So you will
> >get bogus numbers. Or am I misunderstanding something?
> 
> Persistent memory has two user interfaces.
> One is filesystem DAX, sitting on pmem block device, mounted with dax option to
> by pass page cache, `df` could meets my customer needs.
> The other is device DAX, where user could only mmap it to its address space,
> No file system concept. That's why we need something equivalent with `df`.
> 
> Share mappings increase page mapcount, that's what PSS field for.
> It will proportionate the total size, for example the library(2MB) used by two
> processes, RSS will report 2MB plus each process own memory size,
> where PSS report the proportionally one, 2MB/2(two processes
> share the library, the page mapcount is 2) plus its own memory size.
> 
> Btw, smaps is the best place to be compatible with existing online monitoring tools
> customer use now a days.

But you cannot touch rss and pss because you are going to break existing
users as Dave already pointed out. So you need something special.
Accounting page tables sounds like an interesting approach but you will
have no idea about sharing and so you are back to square one.

-- 
Michal Hocko
SUSE Labs

RE: [PATCH v4] Add /proc/PID/smaps support for DAX

[Du, Fan]

>-----Original Message-----
>From: Michal Hocko [mailto:mhocko@kernel.org]
>Sent: Friday, October 27, 2017 5:09 PM
>To: Du, Fan <fan.du@intel.com>
>Cc: Hansen, Dave <dave.hansen@intel.com>; akpm@linux-foundation.org;
>hch@lst.de; Williams, Dan J <dan.j.williams@intel.com>;
>linux-kernel@vger.kernel.org
>Subject: Re: [PATCH v4] Add /proc/PID/smaps support for DAX
>
>On Fri 27-10-17 09:03:12, Du, Fan wrote:
>[...]
>> >I am not deeply familiar with DAX but I would expect that most users
>> >will use a FS on top of it where we have standard tools. If the use is
>> >direct then I can see how this make things more complicated but smaps is
>> >not the right answer IMHO. Why? Well, just consider that you map the
>> >same portions of the device multiple times for whatever reason and you
>> >are screwed because you have no means to distinguish those. So you will
>> >get bogus numbers. Or am I misunderstanding something?
>>
>> Persistent memory has two user interfaces.
>> One is filesystem DAX, sitting on pmem block device, mounted with dax
>option to
>> by pass page cache, `df` could meets my customer needs.
>> The other is device DAX, where user could only mmap it to its address space,
>> No file system concept. That's why we need something equivalent with `df`.
>>
>> Share mappings increase page mapcount, that's what PSS field for.
>> It will proportionate the total size, for example the library(2MB) used by two
>> processes, RSS will report 2MB plus each process own memory size,
>> where PSS report the proportionally one, 2MB/2(two processes
>> share the library, the page mapcount is 2) plus its own memory size.
>>
>> Btw, smaps is the best place to be compatible with existing online monitoring
>tools
>> customer use now a days.
>
>But you cannot touch rss and pss because you are going to break existing
>users as Dave already pointed out. 

Why it will break something? Do you mind to elaborate?
The vma part of each smaps portion has associated file if does exist,
The user spaces monitoring tools will definitely check this field.

>So you need something special.
>Accounting page tables sounds like an interesting approach but you will
>have no idea about sharing and so you are back to square one.
>
>--
>Michal Hocko
>SUSE Labs

Re: [PATCH v4] Add /proc/PID/smaps support for DAX

[Michal Hocko]

On Fri 27-10-17 09:17:07, Du, Fan wrote:
[...]
> >But you cannot touch rss and pss because you are going to break existing
> >users as Dave already pointed out. 
> 
> Why it will break something? Do you mind to elaborate?
> The vma part of each smaps portion has associated file if does exist,
> The user spaces monitoring tools will definitely check this field.

Because there are tools which evaluate rss and pss as the real _memory_
consumption. If you put non-ram based memory there you would confuse
them and they would do wrong decisions. In fact we do not even include
all the RAM based memory there. For example hugetlb pages are not
involved and have their separate counter because there are tools which
would misjudge processes with large hugetlb mapping - e.g. kill them as
excessive consumers without any memory returned back to the system.

While all this is really far from ideal, this is how the userspace work
and we are not breaking existing usecases.

-- 
Michal Hocko
SUSE Labs

RE: [PATCH v4] Add /proc/PID/smaps support for DAX

[Du, Fan]

>-----Original Message-----
>From: Michal Hocko [mailto:mhocko@kernel.org]
>Sent: Friday, October 27, 2017 4:43 PM
>To: Du, Fan <fan.du@intel.com>
>Cc: Hansen, Dave <dave.hansen@intel.com>; akpm@linux-foundation.org;
>hch@lst.de; Williams, Dan J <dan.j.williams@intel.com>;
>linux-kernel@vger.kernel.org
>Subject: Re: [PATCH v4] Add /proc/PID/smaps support for DAX
>
>On Fri 27-10-17 08:24:07, Du, Fan wrote:
>>
>>
>> >-----Original Message-----
>> >From: Michal Hocko [mailto:mhocko@kernel.org]
>> >Sent: Friday, October 27, 2017 4:08 PM
>> >To: Du, Fan <fan.du@intel.com>
>> >Cc: Hansen, Dave <dave.hansen@intel.com>; akpm@linux-foundation.org;
>> >hch@lst.de; Williams, Dan J <dan.j.williams@intel.com>;
>> >linux-kernel@vger.kernel.org
>> >Subject: Re: [PATCH v4] Add /proc/PID/smaps support for DAX
>> >
>> >On Fri 27-10-17 02:47:43, Du, Fan wrote:
>> >>
>> >>
>> >> >-----Original Message-----
>> >> >From: Hansen, Dave
>> >> >Sent: Thursday, October 26, 2017 10:03 PM
>> >> >To: Du, Fan <fan.du@intel.com>; akpm@linux-foundation.org;
>hch@lst.de;
>> >> >Williams, Dan J <dan.j.williams@intel.com>; mhocko@kernel.org
>> >> >Cc: linux-kernel@vger.kernel.org
>> >> >Subject: Re: [PATCH v4] Add /proc/PID/smaps support for DAX
>> >> >
>> >> >I'm honestly not understanding what problem this solves.  Could you,
>> >> >perhaps, do a before and after of smaps with and without this patch?
>> >>
>> >> The motivation here is described in the commit message.
>> >> ------------------------------------------------------------------------------------------
>> >> Memory behind device DAX is not attached into normal memory
>> >> management system, when user mmap /dev/dax, smaps part is
>> >> currently missing, so no idea for user to check how much
>> >> device DAX memory are actually used in practice.
>> >
>> >This might be motivation but you are still not explaining _why_ that is
>> >a problem. _Who_ is going to use that information and for _what_
>> >purpose. This is really essential!
>>
>> If user created device DAX, how did one know how much memory being
>used?
>> by "used" I mean, page table mapping created, fact is no way to find out
>here.
>>
>> why does this master? The answer is same as I bought 512G SSD disk, why
>> do I want to check disk usage with `df`?! if application use only 128G, it
>makes
>> no sense at all for me to buy more redundant persistent memory if Cloud
>provider
>> has more other option to choose.
>
>I am not deeply familiar with DAX but I would expect that most users
>will use a FS on top of it where we have standard tools. If the use is
>direct then I can see how this make things more complicated but smaps is
>not the right answer IMHO. Why? Well, just consider that you map the
>same portions of the device multiple times for whatever reason and you
>are screwed because you have no means to distinguish those. So you will
>get bogus numbers. Or am I misunderstanding something?
>
>If you need a DAX device statistics then make them device specific. This
>is the only reliable way to get valid data.

Thanks for your comments, I will try to discuss with Dan about this.
Have a nice day!

>--
>Michal Hocko
>SUSE Labs

Re: [PATCH 2/2] Add /proc/PID/{smaps, numa_maps} support for DAX

[Dan Williams]

On Thu, Oct 26, 2017 at 9:00 PM, Du, Fan <fan.du@intel.com> wrote:
>
>
>>-----Original Message-----
>>From: linux-kernel-owner@vger.kernel.org
>>[mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Dave Hansen
>>Sent: Thursday, October 26, 2017 10:51 PM
>>To: Michal Hocko <mhocko@kernel.org>
>>Cc: Du, Fan <fan.du@intel.com>; akpm@linux-foundation.org; hch@lst.de;
>>Williams, Dan J <dan.j.williams@intel.com>; linux-kernel@vger.kernel.org;
>>linux-api@vger.kernel.org
>>Subject: Re: [PATCH 2/2] Add /proc/PID/{smaps, numa_maps} support for DAX
>>
>>On 10/26/2017 07:31 AM, Michal Hocko wrote:
>>> On Thu 26-10-17 07:24:14, Dave Hansen wrote:
>>>> Actually, I don't remember whether it was tooling or just confused
>>>> humans.  I *think* Dan was trying to write test cases for huge page DAX
>>>> support and couldn't figure out whether or not it was using large pages.
>>>
>>> That sounds like a very weak justification to adding new stuff to smaps
>>> to be honest.
>>
>>Yep, agreed.  It can't go in _just_ for DAX, and Fan and the other DAX
>>folks need to elaborate on their needs here.
>
> If user creates device DAX /dev/dax with some capacity like 512G, mmap it and
> Use it will, or touched 128G. To my best knowledge at this part, there is no
> statistics reported how much memory behind DAX actually used.
>
> This is the problem our customer is facing right now.

I'm not sure I understand, DAX is statically allocated. There's no
private memory taken from the page allocator to back device-dax
mappings. Unless you are trying to determine memory usage of page
tables?

Re: [PATCH 2/2] Add /proc/PID/{smaps, numa_maps} support for DAX

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 3533 bytes --]

Hi Fan,

Thank you for the patch! Yet we hit a small issue.
[auto build test WARNING on linus/master]
[also build test WARNING on v4.14-rc6 next-20171018]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Fan-Du/proc-mm-export-PTE-sizes-directly-in-smaps/20171027-233355
config: i386-randconfig-b0-10280854 (attached as .config)
compiler: gcc-5 (Debian 5.4.1-2) 5.4.1 20160904
reproduce:
        # save the attached .config to linux build tree
        make ARCH=i386 

Note: it may well be a FALSE warning. FWIW you are at least aware of it now.
http://gcc.gnu.org/wiki/Better_Uninitialized_Warnings

All warnings (new ones prefixed by >>):

   In file included from arch/x86/include/asm/processor.h:31:0,
                    from arch/x86/include/asm/cpufeature.h:4,
                    from arch/x86/include/asm/thread_info.h:52,
                    from include/linux/thread_info.h:37,
                    from arch/x86/include/asm/preempt.h:6,
                    from include/linux/preempt.h:80,
                    from include/linux/spinlock.h:50,
                    from include/linux/mmzone.h:7,
                    from include/linux/gfp.h:5,
                    from include/linux/mm.h:9,
                    from fs/proc/task_mmu.c:1:
   fs/proc/task_mmu.c: In function 'smaps_pte_range':
>> include/linux/err.h:40:24: warning: 'page' may be used uninitialized in this function [-Wmaybe-uninitialized]
     return unlikely(!ptr) || IS_ERR_VALUE((unsigned long)ptr);
                           ^
   fs/proc/task_mmu.c:586:15: note: 'page' was declared here
     struct page *page;
                  ^
--
   In file included from arch/x86/include/asm/processor.h:31:0,
                    from arch/x86/include/asm/cpufeature.h:4,
                    from arch/x86/include/asm/thread_info.h:52,
                    from include/linux/thread_info.h:37,
                    from arch/x86/include/asm/preempt.h:6,
                    from include/linux/preempt.h:80,
                    from include/linux/spinlock.h:50,
                    from include/linux/mmzone.h:7,
                    from include/linux/gfp.h:5,
                    from include/linux/mm.h:9,
                    from fs//proc/task_mmu.c:1:
   fs//proc/task_mmu.c: In function 'smaps_pte_range':
>> include/linux/err.h:40:24: warning: 'page' may be used uninitialized in this function [-Wmaybe-uninitialized]
     return unlikely(!ptr) || IS_ERR_VALUE((unsigned long)ptr);
                           ^
   fs//proc/task_mmu.c:586:15: note: 'page' was declared here
     struct page *page;
                  ^

vim +/page +40 include/linux/err.h

^1da177e Linus Torvalds 2005-04-16  37  
a5ed3cee Joe Perches    2014-04-03  38  static inline bool __must_check IS_ERR_OR_NULL(__force const void *ptr)
603c4ba9 Phil Carmody   2009-12-14  39  {
dfffa587 Viresh Kumar   2016-01-15 @40  	return unlikely(!ptr) || IS_ERR_VALUE((unsigned long)ptr);
603c4ba9 Phil Carmody   2009-12-14  41  }
603c4ba9 Phil Carmody   2009-12-14  42  

:::::: The code at line 40 was first introduced by commit
:::::: dfffa587a6bcd84f2087f88e11600b0e8b0aa1ee err.h: add (missing) unlikely() to IS_ERR_OR_NULL()

:::::: TO: Viresh Kumar <viresh.kumar@linaro.org>
:::::: CC: Linus Torvalds <torvalds@linux-foundation.org>

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 31695 bytes --]

[lkp-robot] [proc] eb948c71f7: WARNING:at_mm/hugetlb.c:#hugetlb_add_hstate

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2972 bytes --]


FYI, we noticed the following commit (built with gcc-5):

commit: eb948c71f790f4fd27440895ca19180a78fd3016 ("proc: mm: export PTE sizes directly in smaps")
url: https://github.com/0day-ci/linux/commits/Fan-Du/proc-mm-export-PTE-sizes-directly-in-smaps/20171027-233355


in testcase: trinity
with following parameters:

	runtime: 300s

test-description: Trinity is a linux system call fuzz tester.
test-url: http://codemonkey.org.uk/projects/trinity/


on test machine: qemu-system-i386 -enable-kvm -m 320M

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+---------------------------------------------+------------+------------+
|                                             | f34157878d | eb948c71f7 |
+---------------------------------------------+------------+------------+
| boot_successes                              | 8          | 0          |
| boot_failures                               | 0          | 8          |
| WARNING:at_mm/hugetlb.c:#hugetlb_add_hstate | 0          | 8          |
| EIP:hugetlb_add_hstate                      | 0          | 8          |
+---------------------------------------------+------------+------------+



[    0.499097] WARNING: CPU: 0 PID: 1 at mm/hugetlb.c:2849 hugetlb_add_hstate+0x146/0x161
[    0.501039] Modules linked in:
[    0.502228] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc6-00022-geb948c7 #1
[    0.503064] task: b0138000 task.stack: b012a000
[    0.504067] EIP: hugetlb_add_hstate+0x146/0x161
[    0.505063] EFLAGS: 00210212 CPU: 0
[    0.506064] EAX: 00000000 EBX: 00000001 ECX: 00000000 EDX: 00000001
[    0.507064] ESI: ffc00000 EDI: 00000000 EBP: b012bee4 ESP: b012bed4
[    0.508065]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    0.509065] CR0: 80050033 CR2: 00000000 CR3: 01cbe000 CR4: 00000690
[    0.510071] Call Trace:
[    0.511104]  hugetlb_init+0x58/0x4e1
[    0.512129]  ? up_write+0x1b/0x37
[    0.513096]  ? blocking_notifier_chain_register+0x56/0x60
[    0.514069]  ? mm_compute_batch_notifier+0x19/0x19
[    0.515070]  ? hugetlb_init+0x4e1/0x4e1
[    0.516095]  hugetlb_init+0x16/0x1d
[    0.517070]  do_one_initcall+0x80/0x14c
[    0.518130]  ? do_early_param+0x78/0x78
[    0.520096]  ? kernel_init_freeable+0xe7/0x17a
[    0.521191]  ? up_write+0x1b/0x37
[    0.522070]  ? kernel_init_freeable+0xe7/0x17a
[    0.523099]  kernel_init_freeable+0x107/0x17a
[    0.525064]  ? rest_init+0x115/0x115
[    0.526096]  kernel_init+0xd/0xd5
[    0.527094]  ret_from_fork+0x19/0x24
[    0.528165] Code: b3 b1 83 c4 10 31 db 81 7d f0 ff ff 3f 00 6a 00 b8 b8 58 a8 b1 0f 97 c3 31 c9 89 da e8 55 ee 5e ff 81 7d f0 ff ff 3f 00 58 76 02 <0f> ff 6a 00 31 c9 89 da b8 a0 58 a8 b1 e8 39 ee 5e ff 58 8d 65
[    0.532071] ---[ end trace 22f52a911eb8bbac ]---


To reproduce:

        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> job-script  # job-script is attached in this email



Thanks,
Xiaolong

[-- Attachment #2: config-4.14.0-rc6-00022-geb948c7 --]
[-- Type: text/plain, Size: 118222 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 4.14.0-rc6 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_SMP=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_FHANDLE=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not set
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_BPF is not set
CONFIG_CGROUP_DEBUG=y
# CONFIG_SOCK_CGROUP_DATA is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_POSIX_TIMERS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_ADVISE_SYSCALLS is not set
# CONFIG_USERFAULTFD is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_MEMBARRIER is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SLUB_CPU_PARTIAL is not set
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_THIN_ARCHIVES=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
# CONFIG_HAVE_ARCH_HASH is not set
CONFIG_ISA_BUS_API=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
# CONFIG_HAVE_ARCH_VMAP_STACK is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
# CONFIG_REFCOUNT_FULL is not set

#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_GCOV_PROFILE_ALL is not set
CONFIG_GCOV_FORMAT_AUTODETECT=y
# CONFIG_GCOV_FORMAT_3_4 is not set
# CONFIG_GCOV_FORMAT_4_7 is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
# CONFIG_BLOCK is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_FAST_FEATURE_TESTS is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_GOLDFISH is not set
CONFIG_INTEL_RDT=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=m
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_32_IRIS=m
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
# CONFIG_CPU_SUP_CYRIX_32 is not set
# CONFIG_CPU_SUP_AMD is not set
# CONFIG_CPU_SUP_CENTAUR is not set
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_SCHED_MC_PRIO is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set

#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_INTEL_UNCORE is not set
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_X86_LEGACY_VM86 is not set
# CONFIG_VM86 is not set
CONFIG_TOSHIBA=y
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
CONFIG_VMSPLIT_3G_OPT=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xB0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_GENERIC_GUP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
# CONFIG_ARCH_WANTS_THP_SWAP is not set
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_AREAS=7
CONFIG_ZPOOL=y
# CONFIG_ZBUD is not set
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=m
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_HIGHPTE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not set
# CONFIG_ARCH_RANDOM is not set
# CONFIG_X86_SMAP is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM is not set
CONFIG_PM_OPP=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
# CONFIG_PCIEASPM_DEFAULT is not set
# CONFIG_PCIEASPM_POWERSAVE is not set
CONFIG_PCIEASPM_POWER_SUPERSAVE=y
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_DPC is not set
CONFIG_PCIE_PTM=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT is not set

#
# PCI host controller drivers
#

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=m
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
# CONFIG_EISA_NAMES is not set
CONFIG_SCx200=m
# CONFIG_SCx200HR_TIMER is not set
# CONFIG_OLPC is not set
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
# CONFIG_PCCARD is not set
CONFIG_RAPIDIO=m
CONFIG_RAPIDIO_TSI721=m
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_ENUM_BASIC=m
# CONFIG_RAPIDIO_CHMAN is not set
CONFIG_RAPIDIO_MPORT_CDEV=m

#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_TSI57X=m
# CONFIG_RAPIDIO_CPS_XX is not set
CONFIG_RAPIDIO_TSI568=m
# CONFIG_RAPIDIO_CPS_GEN2 is not set
CONFIG_RAPIDIO_RXS_GEN3=m
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_COMPAT_32=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_DNS_RESOLVER is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_STREAM_PARSER is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_STREAM_PARSER is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
# CONFIG_DST_CACHE is not set
# CONFIG_GRO_CELLS is not set
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_ADDRESS_PCI=y
CONFIG_OF_IRQ=y
CONFIG_OF_PCI=y
CONFIG_OF_PCI_IRQ=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
CONFIG_IBM_ASM=y
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=m
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_TI_DAC7512=m
CONFIG_PCH_PHUB=y
# CONFIG_USB_SWITCH_FSA9480 is not set
CONFIG_LATTICE_ECP3_CONFIG=m
CONFIG_SRAM=y
CONFIG_PCI_ENDPOINT_TEST=m
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_EEPROM_IDT_89HPESX=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=y

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
# CONFIG_INTEL_MEI_ME is not set
CONFIG_INTEL_MEI_TXE=y
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
CONFIG_ECHO=y
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
# CONFIG_CXL_LIB is not set
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_NOSY=m
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=y
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=y
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
CONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_GPIO is not set
CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_KEYBOARD_TCA6416=y
# CONFIG_KEYBOARD_TCA8418 is not set
CONFIG_KEYBOARD_MATRIX=m
CONFIG_KEYBOARD_LM8323=y
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
CONFIG_KEYBOARD_MPR121=m
CONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_OMAP4=y
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_TM2_TOUCHKEY=m
CONFIG_KEYBOARD_TWL4030=y
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_KEYBOARD_CROS_EC=m
CONFIG_KEYBOARD_CAP11XX=m
CONFIG_KEYBOARD_BCM=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not set
CONFIG_MOUSE_PS2_BYD=y
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
# CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS is not set
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_PS2_FOCALTECH is not set
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_INPORT=m
# CONFIG_MOUSE_ATIXL is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
CONFIG_TABLET_USB_AIPTEK=y
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_PEGASUS=y
CONFIG_TABLET_SERIAL_WACOM4=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
CONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_TOUCHSCREEN_AD7877 is not set
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
CONFIG_TOUCHSCREEN_AR1021_I2C=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
CONFIG_TOUCHSCREEN_ATMEL_MXT_T37=y
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=m
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
CONFIG_TOUCHSCREEN_DA9034=y
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_EGALAX=y
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
CONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_GOODIX is not set
CONFIG_TOUCHSCREEN_ILI210X=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
CONFIG_TOUCHSCREEN_ELAN=y
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_MAX11801=m
CONFIG_TOUCHSCREEN_MCS5000=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_MELFAS_MIP4=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_HTCPEN=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_PIXCIR=m
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
# CONFIG_TOUCHSCREEN_WM831X is not set
CONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not set
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
# CONFIG_TOUCHSCREEN_MC13783 is not set
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
# CONFIG_TOUCHSCREEN_USB_3M is not set
CONFIG_TOUCHSCREEN_USB_ITM=y
# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
CONFIG_TOUCHSCREEN_USB_GOTOP=y
# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
# CONFIG_TOUCHSCREEN_USB_ELO is not set
# CONFIG_TOUCHSCREEN_USB_E2I is not set
# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
CONFIG_TOUCHSCREEN_USB_NEXIO=y
# CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not set
CONFIG_TOUCHSCREEN_TOUCHIT213=y
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_TOUCHSCREEN_TSC2007_IIO=y
# CONFIG_TOUCHSCREEN_PCAP is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
CONFIG_TOUCHSCREEN_SILEAD=m
CONFIG_TOUCHSCREEN_SIS_I2C=m
# CONFIG_TOUCHSCREEN_ST1232 is not set
CONFIG_TOUCHSCREEN_STMFTS=y
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
CONFIG_TOUCHSCREEN_SX8654=m
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_TOUCHSCREEN_ZET6223=m
CONFIG_TOUCHSCREEN_ZFORCE=m
CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
CONFIG_TOUCHSCREEN_ROHM_BU21023=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM80X_ONKEY=y
CONFIG_INPUT_AD714X=y
# CONFIG_INPUT_AD714X_I2C is not set
# CONFIG_INPUT_AD714X_SPI is not set
CONFIG_INPUT_ARIZONA_HAPTICS=m
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
CONFIG_INPUT_E3X0_BUTTON=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MC13783_PWRBUTTON is not set
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_GP2A=y
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_TILT_POLLED=y
# CONFIG_INPUT_GPIO_DECODER is not set
CONFIG_INPUT_CPCAP_PWRBUTTON=m
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
CONFIG_INPUT_ATI_REMOTE2=m
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_REGULATOR_HAPTIC=y
CONFIG_INPUT_TPS65218_PWRBUTTON=m
CONFIG_INPUT_TWL4030_PWRBUTTON=m
CONFIG_INPUT_TWL4030_VIBRA=m
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_PCF8574=y
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA9063_ONKEY is not set
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_PCAP=y
CONFIG_INPUT_ADXL34X=m
CONFIG_INPUT_ADXL34X_I2C=m
CONFIG_INPUT_ADXL34X_SPI=m
CONFIG_INPUT_IMS_PCU=y
CONFIG_INPUT_CMA3000=m
# CONFIG_INPUT_CMA3000_I2C is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
CONFIG_INPUT_DRV2665_HAPTICS=y
CONFIG_INPUT_DRV2667_HAPTICS=y
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
# CONFIG_RMI4_SPI is not set
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
CONFIG_USERIO=m
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=m
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
CONFIG_MOXA_INTELLIO=m
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=y
CONFIG_NOZOMI=y
CONFIG_ISI=y
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_ROUTER is not set
CONFIG_TRACE_SINK=y
CONFIG_DEVMEM=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_ASPEED_VUART=y
# CONFIG_SERIAL_8250_FSL is not set
CONFIG_SERIAL_8250_DW=m
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
# CONFIG_SERIAL_8250_MOXA is not set
CONFIG_SERIAL_OF_PLATFORM=m

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=y
# CONFIG_SERIAL_MAX310X is not set
CONFIG_SERIAL_UARTLITE=y
# CONFIG_SERIAL_UARTLITE_CONSOLE is not set
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=m
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_IFX6X60=m
CONFIG_SERIAL_PCH_UART=y
CONFIG_SERIAL_PCH_UART_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=m
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_CONEXANT_DIGICOLOR=m
CONFIG_SERIAL_DEV_BUS=m
CONFIG_TTY_PRINTK=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_TPM=m
CONFIG_NVRAM=y
# CONFIG_DTLK is not set
CONFIG_R3964=y
CONFIG_APPLICOM=y
# CONFIG_SONYPI is not set
CONFIG_MWAVE=y
CONFIG_SCx200_GPIO=m
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=m
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_CORE=m
CONFIG_TCG_TIS=m
CONFIG_TCG_TIS_SPI=m
CONFIG_TCG_TIS_I2C_ATMEL=m
# CONFIG_TCG_TIS_I2C_INFINEON is not set
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_CRB is not set
CONFIG_TCG_VTPM_PROXY=m
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=m
CONFIG_TCG_TIS_ST33ZP24_SPI=y
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_MUX_GPMUX is not set
CONFIG_I2C_MUX_LTC4306=m
CONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_REG=m
CONFIG_I2C_MUX_MLXCPLD=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_ISMT=y
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=m
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PCI=y
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
CONFIG_I2C_EG20T=m
# CONFIG_I2C_EMEV2 is not set
CONFIG_I2C_GPIO=y
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_PXA=m
CONFIG_I2C_PXA_PCI=y
CONFIG_I2C_RK3X=y
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_DLN2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=y
# CONFIG_I2C_CROS_EC_TUNNEL is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=m
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_CADENCE=y
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_PCI=y
# CONFIG_SPI_DW_MID_DMA is not set
# CONFIG_SPI_DW_MMIO is not set
CONFIG_SPI_DLN2=m
CONFIG_SPI_GPIO=m
# CONFIG_SPI_FSL_SPI is not set
CONFIG_SPI_OC_TINY=y
CONFIG_SPI_PXA2XX=m
CONFIG_SPI_PXA2XX_PCI=m
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_SC18IS602=m
CONFIG_SPI_TOPCLIFF_PCH=y
CONFIG_SPI_XCOMM=y
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_LOOPBACK_TEST is not set
CONFIG_SPI_TLE62X0=m
# CONFIG_SPI_SLAVE is not set
CONFIG_SPMI=m
CONFIG_HSI=m
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=m
# CONFIG_PPS is not set

#
# PTP clock support
#

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_GPIOLIB=y
CONFIG_OF_GPIO=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=m

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_74XX_MMIO is not set
CONFIG_GPIO_ALTERA=y
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
CONFIG_GPIO_EXAR=m
CONFIG_GPIO_FTGPIO010=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_GRGPIO=y
CONFIG_GPIO_ICH=y
# CONFIG_GPIO_LYNXPOINT is not set
CONFIG_GPIO_MOCKUP=y
CONFIG_GPIO_SYSCON=m
CONFIG_GPIO_VX855=m
CONFIG_GPIO_XILINX=m

#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_104_DIO_48E=y
CONFIG_GPIO_104_IDIO_16=m
CONFIG_GPIO_104_IDI_48=y
CONFIG_GPIO_F7188X=m
# CONFIG_GPIO_GPIO_MM is not set
CONFIG_GPIO_IT87=y
CONFIG_GPIO_SCH=y
CONFIG_GPIO_SCH311X=m
CONFIG_GPIO_WS16C48=m

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=m
CONFIG_GPIO_ADNP=m
CONFIG_GPIO_MAX7300=m
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TPIC2810=y

#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ARIZONA=m
# CONFIG_GPIO_BD9571MWV is not set
CONFIG_GPIO_CS5535=y
# CONFIG_GPIO_DLN2 is not set
CONFIG_GPIO_JANZ_TTL=m
CONFIG_GPIO_LP3943=m
CONFIG_GPIO_LP873X=m
# CONFIG_GPIO_LP87565 is not set
CONFIG_GPIO_MAX77620=m
# CONFIG_GPIO_RC5T583 is not set
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TIMBERDALE=y
# CONFIG_GPIO_TPS65218 is not set
# CONFIG_GPIO_TPS6586X is not set
# CONFIG_GPIO_TPS65912 is not set
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_UCB1400=m
CONFIG_GPIO_WM831X=m
# CONFIG_GPIO_WM8994 is not set

#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_PCH=m
CONFIG_GPIO_PCI_IDIO_16=y
CONFIG_GPIO_RDC321X=m
# CONFIG_GPIO_SODAVILLE is not set

#
# SPI GPIO expanders
#
CONFIG_GPIO_74X164=m
# CONFIG_GPIO_MAX7301 is not set
CONFIG_GPIO_MC33880=y
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set

#
# USB GPIO expanders
#
CONFIG_W1=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_DS1WM=m
CONFIG_W1_MASTER_GPIO=y

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
# CONFIG_W1_SLAVE_DS2408_READBACK is not set
CONFIG_W1_SLAVE_DS2413=y
# CONFIG_W1_SLAVE_DS2406 is not set
CONFIG_W1_SLAVE_DS2423=m
CONFIG_W1_SLAVE_DS2805=y
CONFIG_W1_SLAVE_DS2431=m
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2438=m
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_POWER_AVS=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_POWER_RESET_LTC2952 is not set
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_RESET_SYSCON_POWEROFF=y
# CONFIG_SYSCON_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
CONFIG_GENERIC_ADC_BATTERY=m
CONFIG_WM831X_BACKUP=m
# CONFIG_WM831X_POWER is not set
CONFIG_TEST_POWER=y
CONFIG_BATTERY_ACT8945A=m
CONFIG_BATTERY_CPCAP=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_LEGO_EV3 is not set
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=m
CONFIG_BATTERY_BQ27XXX_HDQ=y
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
# CONFIG_BATTERY_DA9030 is not set
# CONFIG_CHARGER_DA9150 is not set
CONFIG_BATTERY_DA9150=m
CONFIG_BATTERY_MAX17040=y
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_BATTERY_MAX1721X=y
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_LP8788=m
CONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_MANAGER is not set
# CONFIG_CHARGER_LTC3651 is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77693 is not set
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24257=y
# CONFIG_CHARGER_BQ24735 is not set
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_SMB347=y
# CONFIG_CHARGER_TPS65090 is not set
CONFIG_CHARGER_TPS65217=m
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_RT5033=m
CONFIG_CHARGER_RT9455=y
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_AD7314=m
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ASPEED=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_MC13783_ADC=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_HIH6130=m
# CONFIG_SENSORS_IIO_HWMON is not set
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_POWR1220=m
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC2990=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=m
CONFIG_SENSORS_MAX31722=m
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_TC654 is not set
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=m
CONFIG_SENSORS_NCT7802=m
CONFIG_SENSORS_NCT7904=m
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
CONFIG_SENSORS_IBM_CFFPS=m
CONFIG_SENSORS_IR35221=m
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC2978_REGULATOR is not set
CONFIG_SENSORS_LTC3815=m
# CONFIG_SENSORS_MAX16064 is not set
CONFIG_SENSORS_MAX20751=m
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_TPS40422=m
CONFIG_SENSORS_TPS53679=m
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_ZL6100 is not set
CONFIG_SENSORS_SHT15=m
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SHT3x=m
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_STTS751=m
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=m

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_OF is not set
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_STEP_WISE is not set
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
# CONFIG_CLOCK_THERMAL is not set
CONFIG_DEVFREQ_THERMAL=y
# CONFIG_THERMAL_EMULATION is not set
CONFIG_MAX77620_THERMAL=m
CONFIG_INTEL_POWERCLAMP=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
CONFIG_INTEL_SOC_DTS_THERMAL=m

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
CONFIG_INTEL_PCH_THERMAL=m
CONFIG_QCOM_SPMI_TEMP_ALARM=m
CONFIG_GENERIC_ADC_THERMAL=m
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
CONFIG_MFD_ACT8945A=m
CONFIG_MFD_AS3711=y
# CONFIG_MFD_AS3722 is not set
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_MFD_ATMEL_FLEXCOM=m
CONFIG_MFD_ATMEL_HLCDC=m
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_BD9571MWV=y
# CONFIG_MFD_AXP20X_I2C is not set
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=m
# CONFIG_MFD_CROS_EC_SPI is not set
CONFIG_PMIC_DA903X=y
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
CONFIG_MFD_DA9063=m
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_HI6421_PMIC is not set
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=m
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
CONFIG_MFD_INTEL_LPSS=y
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
CONFIG_MFD_INTEL_LPSS_PCI=y
CONFIG_MFD_JANZ_CMODIO=y
# CONFIG_MFD_KEMPLD is not set
CONFIG_MFD_88PM800=y
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77620=y
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=m
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
CONFIG_MFD_MT6397=y
# CONFIG_MFD_MENF21BMC is not set
CONFIG_EZX_PCAP=y
CONFIG_MFD_CPCAP=y
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
CONFIG_UCB1400_CORE=m
CONFIG_MFD_RDC321X=m
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RT5033=m
# CONFIG_MFD_RTSX_USB is not set
CONFIG_MFD_RC5T583=y
# CONFIG_MFD_RK808 is not set
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not set
# CONFIG_MFD_STMPE is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=m
CONFIG_MFD_LP3943=m
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=m
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
# CONFIG_MFD_TPS65086 is not set
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=m
# CONFIG_MFD_TPS68470 is not set
CONFIG_MFD_TI_LP873X=m
CONFIG_MFD_TI_LP87565=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
# CONFIG_MFD_TPS80031 is not set
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_LM3533=y
CONFIG_MFD_TIMBERDALE=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
# CONFIG_MFD_ARIZONA_SPI is not set
CONFIG_MFD_CS47L24=y
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
CONFIG_MFD_WM8997=y
# CONFIG_MFD_WM8998 is not set
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=m
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_ACT8945A=m
CONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_ANATOP is not set
# CONFIG_REGULATOR_ARIZONA_LDO1 is not set
CONFIG_REGULATOR_ARIZONA_MICSUPP=m
# CONFIG_REGULATOR_AS3711 is not set
CONFIG_REGULATOR_BCM590XX=m
# CONFIG_REGULATOR_BD9571MWV is not set
CONFIG_REGULATOR_CPCAP=m
# CONFIG_REGULATOR_DA903X is not set
CONFIG_REGULATOR_DA9063=m
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_GPIO=m
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LM363X is not set
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=m
CONFIG_REGULATOR_LP872X=m
# CONFIG_REGULATOR_LP873X is not set
CONFIG_REGULATOR_LP8755=m
CONFIG_REGULATOR_LP87565=y
CONFIG_REGULATOR_LP8788=y
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_MAX8649=m
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX77693=m
# CONFIG_REGULATOR_MC13783 is not set
# CONFIG_REGULATOR_MC13892 is not set
CONFIG_REGULATOR_MT6311=y
# CONFIG_REGULATOR_MT6323 is not set
CONFIG_REGULATOR_MT6397=m
CONFIG_REGULATOR_PCAP=y
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_PV88060=m
CONFIG_REGULATOR_PV88080=y
CONFIG_REGULATOR_PV88090=y
CONFIG_REGULATOR_QCOM_SPMI=m
CONFIG_REGULATOR_RC5T583=y
# CONFIG_REGULATOR_RN5T618 is not set
CONFIG_REGULATOR_RT5033=m
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=m
# CONFIG_REGULATOR_TPS51632 is not set
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65090=m
CONFIG_REGULATOR_TPS65132=y
# CONFIG_REGULATOR_TPS65217 is not set
# CONFIG_REGULATOR_TPS65218 is not set
CONFIG_REGULATOR_TPS6524X=m
# CONFIG_REGULATOR_TPS6586X is not set
CONFIG_REGULATOR_TPS65912=m
CONFIG_REGULATOR_TWL4030=m
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_WM831X=m
CONFIG_REGULATOR_WM8994=m
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
CONFIG_LIRC=y
CONFIG_IR_LIRC_CODEC=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
# CONFIG_IR_JVC_DECODER is not set
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=y
# CONFIG_IR_MCE_KBD_DECODER is not set
# CONFIG_IR_XMP_DECODER is not set
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
# CONFIG_IR_ENE is not set
CONFIG_IR_HIX5HD2=m
# CONFIG_IR_IMON is not set
CONFIG_IR_MCEUSB=y
# CONFIG_IR_ITE_CIR is not set
# CONFIG_IR_FINTEK is not set
# CONFIG_IR_NUVOTON is not set
CONFIG_IR_REDRAT3=m
CONFIG_IR_SPI=y
CONFIG_IR_STREAMZAP=y
# CONFIG_IR_WINBOND_CIR is not set
CONFIG_IR_IGORPLUGUSB=y
# CONFIG_IR_IGUANA is not set
CONFIG_IR_TTUSBIR=m
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_GPIO_CIR=y
CONFIG_IR_GPIO_TX=m
CONFIG_IR_SERIAL=m
# CONFIG_IR_SERIAL_TRANSMITTER is not set
# CONFIG_IR_SIR is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
# CONFIG_VIDEO_PCI_SKELETON is not set
CONFIG_VIDEO_TUNER=y
CONFIG_V4L2_MEM2MEM_DEV=m
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=y
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_CORE=y
# CONFIG_TTPCI_EEPROM is not set
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set

#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
CONFIG_VIDEO_SOLO6X10=m
# CONFIG_VIDEO_TW5864 is not set
CONFIG_VIDEO_TW68=y
CONFIG_VIDEO_TW686X=m
CONFIG_VIDEO_ZORAN=m
# CONFIG_VIDEO_ZORAN_DC30 is not set
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
# CONFIG_VIDEO_ZORAN_LML33 is not set
CONFIG_VIDEO_ZORAN_LML33R10=m
# CONFIG_VIDEO_ZORAN_AVS6EYES is not set

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=y
# CONFIG_VIDEO_CX18_ALSA is not set
CONFIG_VIDEO_CX23885=m
# CONFIG_MEDIA_ALTERA_CI is not set
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
# CONFIG_VIDEO_CX88_BLACKBIRD is not set
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=y
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
# CONFIG_VIDEO_SAA7134_DVB is not set
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set
# CONFIG_DVB_B2C2_FLEXCOP_PCI is not set
# CONFIG_DVB_PLUTO2 is not set
CONFIG_DVB_DM1105=y
CONFIG_DVB_PT1=y
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
# CONFIG_DVB_NGENE is not set
CONFIG_DVB_DDBRIDGE=y
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
CONFIG_DVB_SMIPCIE=y
# CONFIG_DVB_NETUP_UNIDVB is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m
CONFIG_VIDEO_SH_VEU=m
# CONFIG_V4L_TEST_DRIVERS is not set
CONFIG_DVB_PLATFORM_DRIVERS=y

#
# Supported MMC/SDIO adapters
#
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=y
# CONFIG_RADIO_SI470X is not set
CONFIG_RADIO_SI4713=y
CONFIG_USB_SI4713=y
CONFIG_PLATFORM_SI4713=y
CONFIG_I2C_SI4713=y
CONFIG_USB_MR800=y
CONFIG_USB_DSBR=m
CONFIG_RADIO_MAXIRADIO=y
CONFIG_RADIO_SHARK=m
CONFIG_RADIO_SHARK2=y
# CONFIG_USB_KEENE is not set
CONFIG_USB_RAREMONO=m
# CONFIG_USB_MA901 is not set
CONFIG_RADIO_TEA5764=m
CONFIG_RADIO_SAA7706H=y
CONFIG_RADIO_TEF6862=y
CONFIG_RADIO_TIMBERDALE=y
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_V4L_RADIO_ISA_DRIVERS=y
CONFIG_RADIO_ISA=y
CONFIG_RADIO_CADET=y
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=y
CONFIG_RADIO_RTRACK2_PORT=30c
CONFIG_RADIO_AZTECH=m
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_MIROPCM20 is not set
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=y
CONFIG_RADIO_TERRATEC=m
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_CYPRESS_FIRMWARE=y

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=y

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_WM8775=m

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y

#
# Video decoders
#
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m

#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y

#
# SDR tuner chips
#

#
# Miscellaneous helper chips
#

#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_M88RS6000T=y
CONFIG_MEDIA_TUNER_SI2157=y

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV0910=y
CONFIG_DVB_STV6110x=y
CONFIG_DVB_STV6111=y
CONFIG_DVB_MXL5XX=y
CONFIG_DVB_M88DS3103=y

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
CONFIG_DVB_TDA18271C2DD=y
CONFIG_DVB_SI2165=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_STV0288=y
CONFIG_DVB_STB6000=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_CX24116=y
CONFIG_DVB_CX24117=m
CONFIG_DVB_SI21XX=y
CONFIG_DVB_TS2020=y
CONFIG_DVB_DS3000=y
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_STV0367=y
CONFIG_DVB_CXD2841ER=y
CONFIG_DVB_SI2168=y
# CONFIG_DVB_AS102_FE is not set
# CONFIG_DVB_GP8PSK_FE is not set

#
# DVB-C (cable) frontends
#
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_S5H1409=y
CONFIG_DVB_S5H1411=y

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
CONFIG_DVB_TUNER_DIB0070=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBH25=y
CONFIG_DVB_LNBP21=y
CONFIG_DVB_ISL6421=m
CONFIG_DVB_A8293=m
CONFIG_DVB_TDA665x=m

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
CONFIG_DRM_DEBUG_MM_SELFTEST=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_FBDEV_EMULATION is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=m
CONFIG_DRM_GEM_CMA_HELPER=y
CONFIG_DRM_KMS_CMA_HELPER=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_I2C_NXP_TDA998X=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_USERPTR is not set
CONFIG_DRM_AMDGPU=m
CONFIG_DRM_AMDGPU_SI=y
CONFIG_DRM_AMDGPU_CIK=y
# CONFIG_DRM_AMDGPU_USERPTR is not set
CONFIG_DRM_AMDGPU_GART_DEBUGFS=y

#
# ACP (Audio CoProcessor) Configuration
#
CONFIG_DRM_AMD_ACP=y
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I915 is not set
CONFIG_DRM_VGEM=m
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_GMA500=m
# CONFIG_DRM_GMA600 is not set
# CONFIG_DRM_GMA3600 is not set
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_RCAR_DW_HDMI is not set
CONFIG_DRM_QXL=m
CONFIG_DRM_BOCHS=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_PANEL_LVDS=m
# CONFIG_DRM_PANEL_SIMPLE is not set
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=m
CONFIG_DRM_PANEL_JDI_LT070ME05000=m
# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
CONFIG_DRM_PANEL_LG_LG4573=m
CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00=m
# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=m
CONFIG_DRM_PANEL_SITRONIX_ST7789V=m
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
CONFIG_DRM_ANALOGIX_ANX78XX=m
# CONFIG_DRM_DUMB_VGA_DAC is not set
CONFIG_DRM_LVDS_ENCODER=m
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
CONFIG_DRM_NXP_PTN3460=m
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_SIL_SII8620 is not set
CONFIG_DRM_SII902X=m
# CONFIG_DRM_TOSHIBA_TC358767 is not set
CONFIG_DRM_TI_TFP410=m
# CONFIG_DRM_I2C_ADV7511 is not set
CONFIG_DRM_ARCPGU=m
# CONFIG_DRM_HISI_HIBMC is not set
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=m
CONFIG_DRM_TINYDRM=m
CONFIG_TINYDRM_MIPI_DBI=m
CONFIG_TINYDRM_MI0283QT=m
# CONFIG_TINYDRM_REPAPER is not set
CONFIG_TINYDRM_ST7586=m
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_LIB_RANDOM=y

#
# Frame buffer Devices
#
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DDC=m
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=m
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=m
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
CONFIG_FB_OPENCORES=m
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_I740=m
CONFIG_FB_LE80578=m
# CONFIG_FB_CARILLO_RANCH is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
# CONFIG_FB_ATY_BACKLIGHT is not set
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=m
# CONFIG_FB_SIS_300 is not set
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=m
CONFIG_FB_VIA_DIRECT_PROCFS=y
# CONFIG_FB_VIA_X_COMPATIBILITY is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_3DFX_I2C is not set
CONFIG_FB_VOODOO1=m
# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
# CONFIG_FB_GEODE_GX is not set
CONFIG_FB_GEODE_GX1=m
# CONFIG_FB_SM501 is not set
CONFIG_FB_SMSCUFX=m
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
CONFIG_FB_VIRTUAL=m
CONFIG_FB_METRONOME=m
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
CONFIG_FB_BROADSHEET=m
CONFIG_FB_AUO_K190X=m
CONFIG_FB_AUO_K1900=m
# CONFIG_FB_AUO_K1901 is not set
# CONFIG_FB_SSD1307 is not set
CONFIG_FB_SM712=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI922X=m
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=m
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_LCD_S6E63M0=m
CONFIG_LCD_LD9040=m
CONFIG_LCD_AMS369FG06=m
CONFIG_LCD_LMS501KF03=m
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_LM3533=m
# CONFIG_BACKLIGHT_CARILLO_RANCH is not set
CONFIG_BACKLIGHT_DA903X=m
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_PM8941_WLED=m
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP5520=m
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=m
CONFIG_BACKLIGHT_LM3639=m
CONFIG_BACKLIGHT_PANDORA=m
# CONFIG_BACKLIGHT_TPS65217 is not set
CONFIG_BACKLIGHT_AS3711=m
CONFIG_BACKLIGHT_GPIO=m
CONFIG_BACKLIGHT_LV5207LP=m
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_BACKLIGHT_ARCXCNN=m
CONFIG_VGASTATE=m
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_PCM_OSS_PLUGINS is not set
# CONFIG_SND_PCM_TIMER is not set
CONFIG_SND_HRTIMER=m
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_SEQUENCER_OSS=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_MIDI_EMUL=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m
# CONFIG_SND_ISA is not set
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ASIHPI=m
# CONFIG_SND_ATIIXP is not set
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_BT87X=m
CONFIG_SND_BT87X_OVERCLOCK=y
# CONFIG_SND_CA0106 is not set
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_CTXFI=m
# CONFIG_SND_DARLA20 is not set
CONFIG_SND_GINA20=m
# CONFIG_SND_LAYLA20 is not set
CONFIG_SND_DARLA24=m
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X_BOOL is not set
CONFIG_SND_HDSP=m
# CONFIG_SND_HDSPM is not set
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_KORG1212=m
# CONFIG_SND_LOLA is not set
CONFIG_SND_LX6464ES=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
# CONFIG_SND_PCXHR is not set
CONFIG_SND_RIPTIDE=m
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
CONFIG_SND_RME9652=m
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not set
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
# CONFIG_SND_HDA_CODEC_CA0132_DSP is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_SPI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
# CONFIG_SND_FIREWIRE is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_AMD_ACP=m
# CONFIG_SND_ATMEL_SOC is not set
CONFIG_SND_DESIGNWARE_I2S=m
# CONFIG_SND_DESIGNWARE_PCM is not set

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=m
CONFIG_SND_SOC_FSL_SAI=m
CONFIG_SND_SOC_FSL_SSI=m
CONFIG_SND_SOC_FSL_SPDIF=m
CONFIG_SND_SOC_FSL_ESAI=m
# CONFIG_SND_SOC_IMX_AUDMUX is not set
# CONFIG_SND_I2S_HI6210_I2S is not set
CONFIG_SND_SOC_IMG=y
CONFIG_SND_SOC_IMG_I2S_IN=m
# CONFIG_SND_SOC_IMG_I2S_OUT is not set
CONFIG_SND_SOC_IMG_PARALLEL_OUT=m
# CONFIG_SND_SOC_IMG_SPDIF_IN is not set
CONFIG_SND_SOC_IMG_SPDIF_OUT=m
# CONFIG_SND_SOC_IMG_PISTACHIO_INTERNAL_DAC is not set
# CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH is not set
# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
# CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH is not set
# CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH is not set
# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set

#
# STMicroelectronics STM32 SOC audio support
#
CONFIG_SND_SOC_XTFPGA_I2S=m
CONFIG_ZX_TDM=m
CONFIG_SND_SOC_I2C_AND_SPI=m

#
# CODEC drivers
#
CONFIG_SND_SOC_AC97_CODEC=m
CONFIG_SND_SOC_ADAU_UTILS=m
CONFIG_SND_SOC_ADAU1701=m
CONFIG_SND_SOC_ADAU17X1=m
CONFIG_SND_SOC_ADAU1761=m
CONFIG_SND_SOC_ADAU1761_I2C=m
# CONFIG_SND_SOC_ADAU1761_SPI is not set
CONFIG_SND_SOC_ADAU7002=m
CONFIG_SND_SOC_AK4104=m
CONFIG_SND_SOC_AK4554=m
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SOC_AK4642=m
# CONFIG_SND_SOC_AK5386 is not set
CONFIG_SND_SOC_ALC5623=m
CONFIG_SND_SOC_BT_SCO=m
# CONFIG_SND_SOC_CS35L32 is not set
CONFIG_SND_SOC_CS35L33=m
# CONFIG_SND_SOC_CS35L34 is not set
CONFIG_SND_SOC_CS35L35=m
CONFIG_SND_SOC_CS42L42=m
# CONFIG_SND_SOC_CS42L51_I2C is not set
CONFIG_SND_SOC_CS42L52=m
# CONFIG_SND_SOC_CS42L56 is not set
CONFIG_SND_SOC_CS42L73=m
CONFIG_SND_SOC_CS4265=m
# CONFIG_SND_SOC_CS4270 is not set
CONFIG_SND_SOC_CS4271=m
CONFIG_SND_SOC_CS4271_I2C=m
CONFIG_SND_SOC_CS4271_SPI=m
CONFIG_SND_SOC_CS42XX8=m
CONFIG_SND_SOC_CS42XX8_I2C=m
# CONFIG_SND_SOC_CS43130 is not set
CONFIG_SND_SOC_CS4349=m
# CONFIG_SND_SOC_CS53L30 is not set
CONFIG_SND_SOC_DIO2125=m
CONFIG_SND_SOC_HDMI_CODEC=m
# CONFIG_SND_SOC_ES7134 is not set
CONFIG_SND_SOC_ES8316=m
CONFIG_SND_SOC_ES8328=m
# CONFIG_SND_SOC_ES8328_I2C is not set
CONFIG_SND_SOC_ES8328_SPI=m
CONFIG_SND_SOC_GTM601=m
CONFIG_SND_SOC_INNO_RK3036=m
CONFIG_SND_SOC_MAX98504=m
# CONFIG_SND_SOC_MAX98927 is not set
# CONFIG_SND_SOC_MAX9860 is not set
CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
CONFIG_SND_SOC_PCM1681=m
CONFIG_SND_SOC_PCM179X=m
CONFIG_SND_SOC_PCM179X_I2C=m
# CONFIG_SND_SOC_PCM179X_SPI is not set
CONFIG_SND_SOC_PCM3168A=m
CONFIG_SND_SOC_PCM3168A_I2C=m
CONFIG_SND_SOC_PCM3168A_SPI=m
CONFIG_SND_SOC_PCM512x=m
CONFIG_SND_SOC_PCM512x_I2C=m
CONFIG_SND_SOC_PCM512x_SPI=m
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RT5616=m
# CONFIG_SND_SOC_RT5631 is not set
# CONFIG_SND_SOC_RT5677_SPI is not set
CONFIG_SND_SOC_SGTL5000=m
CONFIG_SND_SOC_SIGMADSP=m
CONFIG_SND_SOC_SIGMADSP_I2C=m
CONFIG_SND_SOC_SIGMADSP_REGMAP=m
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
# CONFIG_SND_SOC_SPDIF is not set
CONFIG_SND_SOC_SSM2602=m
# CONFIG_SND_SOC_SSM2602_SPI is not set
CONFIG_SND_SOC_SSM2602_I2C=m
CONFIG_SND_SOC_SSM4567=m
CONFIG_SND_SOC_STA32X=m
CONFIG_SND_SOC_STA350=m
CONFIG_SND_SOC_STI_SAS=m
CONFIG_SND_SOC_TAS2552=m
CONFIG_SND_SOC_TAS5086=m
# CONFIG_SND_SOC_TAS571X is not set
# CONFIG_SND_SOC_TAS5720 is not set
CONFIG_SND_SOC_TFA9879=m
# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
CONFIG_SND_SOC_TLV320AIC31XX=m
# CONFIG_SND_SOC_TLV320AIC3X is not set
CONFIG_SND_SOC_TS3A227E=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8523=m
# CONFIG_SND_SOC_WM8524 is not set
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8711=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
# CONFIG_SND_SOC_WM8737 is not set
CONFIG_SND_SOC_WM8741=m
CONFIG_SND_SOC_WM8750=m
# CONFIG_SND_SOC_WM8753 is not set
CONFIG_SND_SOC_WM8770=m
CONFIG_SND_SOC_WM8776=m
CONFIG_SND_SOC_WM8804=m
CONFIG_SND_SOC_WM8804_I2C=m
# CONFIG_SND_SOC_WM8804_SPI is not set
# CONFIG_SND_SOC_WM8903 is not set
CONFIG_SND_SOC_WM8960=m
CONFIG_SND_SOC_WM8962=m
CONFIG_SND_SOC_WM8974=m
# CONFIG_SND_SOC_WM8978 is not set
CONFIG_SND_SOC_WM8985=m
CONFIG_SND_SOC_ZX_AUD96P22=m
CONFIG_SND_SOC_NAU8540=m
CONFIG_SND_SOC_NAU8810=m
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_TPA6130A2=m
CONFIG_SND_SIMPLE_CARD_UTILS=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SND_SIMPLE_SCU_CARD=m
# CONFIG_SND_AUDIO_GRAPH_CARD is not set
CONFIG_SND_AUDIO_GRAPH_SCU_CARD=m
CONFIG_SND_X86=y
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=m
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=m
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=m
CONFIG_HID_CORSAIR=m
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CMEDIA=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_WALTOP=m
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_NTI=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
# CONFIG_HID_PICOLCD_FB is not set
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEELSERIES=m
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=m
# CONFIG_HID_THINGM is not set
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_UDRAW_PS3=m
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_HID_SENSOR_HUB=m
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
# CONFIG_USB_HID is not set
# CONFIG_HID_PID is not set

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=y
# CONFIG_USB_MOUSE is not set

#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_PCI is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_FOTG210_HCD=m
CONFIG_USB_MAX3421_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_HWA_HCD=y
CONFIG_USB_HCD_SSB=m
CONFIG_USB_HCD_TEST_MODE=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=y
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_OF=y
# CONFIG_USB_CHIPIDEA_UDC is not set
# CONFIG_USB_CHIPIDEA_HOST is not set
CONFIG_USB_ISP1760=m
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
CONFIG_USB_ISP1760_GADGET_ROLE=y
# CONFIG_USB_ISP1760_DUAL_ROLE is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=y
# CONFIG_USB_TEST is not set
CONFIG_USB_EHSET_TEST_FIXTURE=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HUB_USB251XB=y
# CONFIG_USB_HSIC_USB3503 is not set
CONFIG_USB_HSIC_USB4604=m
CONFIG_USB_LINK_LAYER_TEST=m
CONFIG_USB_CHAOSKEY=m

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
CONFIG_USB_GPIO_VBUS=y
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_VERBOSE=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_U_SERIAL_CONSOLE=y

#
# USB Peripheral Controller
#
CONFIG_USB_FUSB300=m
CONFIG_USB_FOTG210_UDC=m
CONFIG_USB_GR_UDC=y
CONFIG_USB_R8A66597=y
# CONFIG_USB_PXA27X is not set
CONFIG_USB_MV_UDC=y
CONFIG_USB_MV_U3D=y
CONFIG_USB_SNP_CORE=m
CONFIG_USB_SNP_UDC_PLAT=m
CONFIG_USB_M66592=m
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_NET2272 is not set
CONFIG_USB_GADGET_XILINX=y
CONFIG_USB_DUMMY_HCD=m
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_F_ACM=y
CONFIG_USB_F_SS_LB=y
CONFIG_USB_U_SERIAL=y
CONFIG_USB_U_AUDIO=m
CONFIG_USB_F_OBEX=y
CONFIG_USB_F_FS=y
CONFIG_USB_F_UAC1_LEGACY=m
CONFIG_USB_F_UAC2=m
CONFIG_USB_F_MIDI=m
CONFIG_USB_F_HID=y
CONFIG_USB_CONFIGFS=y
# CONFIG_USB_CONFIGFS_SERIAL is not set
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
# CONFIG_USB_CONFIGFS_NCM is not set
# CONFIG_USB_CONFIGFS_ECM is not set
# CONFIG_USB_CONFIGFS_ECM_SUBSET is not set
# CONFIG_USB_CONFIGFS_RNDIS is not set
# CONFIG_USB_CONFIGFS_EEM is not set
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
# CONFIG_USB_CONFIGFS_F_UAC1 is not set
CONFIG_USB_CONFIGFS_F_UAC1_LEGACY=y
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
# CONFIG_USB_CONFIGFS_F_UVC is not set
# CONFIG_USB_CONFIGFS_F_PRINTER is not set

#
# USB Power Delivery and Type-C drivers
#
CONFIG_TYPEC=y
CONFIG_TYPEC_UCSI=m
# CONFIG_UCSI_ACPI is not set
CONFIG_USB_LED_TRIG=y
CONFIG_USB_ULPI_BUS=m
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=m
# CONFIG_UWB_I1480U is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
# CONFIG_MEMSTICK_JMICRON_38X is not set
CONFIG_MEMSTICK_R592=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
CONFIG_LEDS_AS3645A=y
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=m
# CONFIG_LEDS_CPCAP is not set
CONFIG_LEDS_LM3530=m
CONFIG_LEDS_LM3533=m
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_MT6323=m
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_WRAP=m
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=m
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8788=y
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_WM831X_STATUS=m
CONFIG_LEDS_DA903X=m
CONFIG_LEDS_DAC124S085=m
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_ADP5520 is not set
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=m
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_MAX77693 is not set
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=y
# CONFIG_LEDS_KTD2692 is not set
# CONFIG_LEDS_IS31FL319X is not set
CONFIG_LEDS_IS31FL32XX=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_ACCESSIBILITY=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_AMD76X=m
# CONFIG_EDAC_E7XXX is not set
CONFIG_EDAC_E752X=y
# CONFIG_EDAC_I82875P is not set
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=y
# CONFIG_EDAC_I3200 is not set
CONFIG_EDAC_IE31200=y
CONFIG_EDAC_X38=y
CONFIG_EDAC_I5400=m
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_I5000=m
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=m
CONFIG_DMA_ACPI=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
# CONFIG_FSL_EDMA is not set
CONFIG_INTEL_IDMA64=m
# CONFIG_PCH_DMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_DW_DMAC_PCI=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
CONFIG_UIO_PRUSS=m
CONFIG_UIO_MF624=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_INPUT is not set
CONFIG_VIRTIO_MMIO=m
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_HYPERV_TSCPAGE is not set
CONFIG_STAGING=y
# CONFIG_IRDA is not set
CONFIG_COMEDI=m
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
# CONFIG_COMEDI_MISC_DRIVERS is not set
# CONFIG_COMEDI_ISA_DRIVERS is not set
CONFIG_COMEDI_PCI_DRIVERS=m
CONFIG_COMEDI_8255_PCI=m
CONFIG_COMEDI_ADDI_WATCHDOG=m
# CONFIG_COMEDI_ADDI_APCI_1032 is not set
CONFIG_COMEDI_ADDI_APCI_1500=m
# CONFIG_COMEDI_ADDI_APCI_1516 is not set
CONFIG_COMEDI_ADDI_APCI_1564=m
CONFIG_COMEDI_ADDI_APCI_16XX=m
CONFIG_COMEDI_ADDI_APCI_2032=m
CONFIG_COMEDI_ADDI_APCI_2200=m
CONFIG_COMEDI_ADDI_APCI_3120=m
# CONFIG_COMEDI_ADDI_APCI_3501 is not set
CONFIG_COMEDI_ADDI_APCI_3XXX=m
# CONFIG_COMEDI_ADL_PCI6208 is not set
CONFIG_COMEDI_ADL_PCI7X3X=m
# CONFIG_COMEDI_ADL_PCI8164 is not set
CONFIG_COMEDI_ADL_PCI9111=m
CONFIG_COMEDI_ADL_PCI9118=m
CONFIG_COMEDI_ADV_PCI1710=m
CONFIG_COMEDI_ADV_PCI1720=m
CONFIG_COMEDI_ADV_PCI1723=m
CONFIG_COMEDI_ADV_PCI1724=m
CONFIG_COMEDI_ADV_PCI1760=m
# CONFIG_COMEDI_ADV_PCI_DIO is not set
CONFIG_COMEDI_AMPLC_DIO200_PCI=m
CONFIG_COMEDI_AMPLC_PC236_PCI=m
# CONFIG_COMEDI_AMPLC_PC263_PCI is not set
CONFIG_COMEDI_AMPLC_PCI224=m
CONFIG_COMEDI_AMPLC_PCI230=m
CONFIG_COMEDI_CONTEC_PCI_DIO=m
CONFIG_COMEDI_DAS08_PCI=m
CONFIG_COMEDI_DT3000=m
CONFIG_COMEDI_DYNA_PCI10XX=m
CONFIG_COMEDI_GSC_HPDI=m
CONFIG_COMEDI_MF6X4=m
CONFIG_COMEDI_ICP_MULTI=m
CONFIG_COMEDI_DAQBOARD2000=m
CONFIG_COMEDI_JR3_PCI=m
CONFIG_COMEDI_KE_COUNTER=m
CONFIG_COMEDI_CB_PCIDAS64=m
CONFIG_COMEDI_CB_PCIDAS=m
CONFIG_COMEDI_CB_PCIDDA=m
CONFIG_COMEDI_CB_PCIMDAS=m
# CONFIG_COMEDI_CB_PCIMDDA is not set
CONFIG_COMEDI_ME4000=m
CONFIG_COMEDI_ME_DAQ=m
CONFIG_COMEDI_NI_6527=m
CONFIG_COMEDI_NI_65XX=m
# CONFIG_COMEDI_NI_660X is not set
CONFIG_COMEDI_NI_670X=m
CONFIG_COMEDI_NI_LABPC_PCI=m
# CONFIG_COMEDI_NI_PCIDIO is not set
CONFIG_COMEDI_NI_PCIMIO=m
CONFIG_COMEDI_RTD520=m
CONFIG_COMEDI_S626=m
CONFIG_COMEDI_MITE=m
CONFIG_COMEDI_NI_TIOCMD=m
CONFIG_COMEDI_USB_DRIVERS=m
CONFIG_COMEDI_DT9812=m
# CONFIG_COMEDI_NI_USB6501 is not set
CONFIG_COMEDI_USBDUX=m
# CONFIG_COMEDI_USBDUXFAST is not set
CONFIG_COMEDI_USBDUXSIGMA=m
CONFIG_COMEDI_VMK80XX=m
CONFIG_COMEDI_8254=m
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_8255_SA=m
# CONFIG_COMEDI_KCOMEDILIB is not set
CONFIG_COMEDI_AMPLC_DIO200=m
CONFIG_COMEDI_AMPLC_PC236=m
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_NI_TIO=m

#
# IIO staging drivers
#

#
# Accelerometers
#
CONFIG_ADIS16201=y
CONFIG_ADIS16203=m
CONFIG_ADIS16209=y
CONFIG_ADIS16240=y

#
# Analog to digital converters
#
# CONFIG_AD7606 is not set
# CONFIG_AD7780 is not set
# CONFIG_AD7816 is not set
# CONFIG_AD7192 is not set
CONFIG_AD7280=y

#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=m
CONFIG_ADT7316_SPI=m
CONFIG_ADT7316_I2C=m

#
# Capacitance to digital converters
#
CONFIG_AD7150=y
CONFIG_AD7152=y
# CONFIG_AD7746 is not set

#
# Direct Digital Synthesis
#
# CONFIG_AD9832 is not set
# CONFIG_AD9834 is not set

#
# Digital gyroscope sensors
#
CONFIG_ADIS16060=y

#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=m

#
# Light sensors
#
# CONFIG_TSL2x7x is not set

#
# Active energy metering IC
#
CONFIG_ADE7753=y
CONFIG_ADE7754=m
CONFIG_ADE7758=m
# CONFIG_ADE7759 is not set
CONFIG_ADE7854=m
CONFIG_ADE7854_I2C=m
# CONFIG_ADE7854_SPI is not set

#
# Resolver to digital converters
#
CONFIG_AD2S90=y
# CONFIG_AD2S1200 is not set
# CONFIG_AD2S1210 is not set

#
# Triggers - standalone
#
# CONFIG_FB_SM750 is not set
CONFIG_FB_XGI=m

#
# Speakup console speech
#
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
CONFIG_ASHMEM=y
CONFIG_ION=y
# CONFIG_ION_SYSTEM_HEAP is not set
# CONFIG_ION_CARVEOUT_HEAP is not set
# CONFIG_ION_CHUNK_HEAP is not set
# CONFIG_ION_CMA_HEAP is not set
# CONFIG_STAGING_BOARD is not set
# CONFIG_LTE_GDM724X is not set
# CONFIG_FIREWIRE_SERIAL is not set
CONFIG_DGNC=y
CONFIG_GS_FPGABOOT=y
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
CONFIG_FB_TFT=m
# CONFIG_FB_TFT_AGM1264K_FL is not set
# CONFIG_FB_TFT_BD663474 is not set
CONFIG_FB_TFT_HX8340BN=m
CONFIG_FB_TFT_HX8347D=m
CONFIG_FB_TFT_HX8353D=m
# CONFIG_FB_TFT_HX8357D is not set
# CONFIG_FB_TFT_ILI9163 is not set
# CONFIG_FB_TFT_ILI9320 is not set
CONFIG_FB_TFT_ILI9325=m
# CONFIG_FB_TFT_ILI9340 is not set
CONFIG_FB_TFT_ILI9341=m
# CONFIG_FB_TFT_ILI9481 is not set
# CONFIG_FB_TFT_ILI9486 is not set
CONFIG_FB_TFT_PCD8544=m
CONFIG_FB_TFT_RA8875=m
# CONFIG_FB_TFT_S6D02A1 is not set
CONFIG_FB_TFT_S6D1121=m
CONFIG_FB_TFT_SH1106=m
CONFIG_FB_TFT_SSD1289=m
# CONFIG_FB_TFT_SSD1305 is not set
CONFIG_FB_TFT_SSD1306=m
CONFIG_FB_TFT_SSD1325=m
# CONFIG_FB_TFT_SSD1331 is not set
# CONFIG_FB_TFT_SSD1351 is not set
CONFIG_FB_TFT_ST7735R=m
CONFIG_FB_TFT_ST7789V=m
CONFIG_FB_TFT_TINYLCD=m
CONFIG_FB_TFT_TLS8204=m
CONFIG_FB_TFT_UC1611=m
CONFIG_FB_TFT_UC1701=m
CONFIG_FB_TFT_UPD161704=m
# CONFIG_FB_TFT_WATTEROTT is not set
CONFIG_FB_FLEX=m
CONFIG_FB_TFT_FBTFT_DEVICE=m
CONFIG_MOST=y
CONFIG_MOSTCORE=y
CONFIG_AIM_CDEV=m
# CONFIG_AIM_NETWORK is not set
CONFIG_AIM_SOUND=m
CONFIG_AIM_V4L2=m
# CONFIG_HDM_DIM2 is not set
# CONFIG_HDM_I2C is not set
# CONFIG_HDM_USB is not set
# CONFIG_GREYBUS is not set

#
# USB Power Delivery and Type-C drivers
#
CONFIG_TYPEC_TCPM=y
CONFIG_TYPEC_TCPCI=m
CONFIG_TYPEC_FUSB302=y
CONFIG_DRM_VBOXVIDEO=m
# CONFIG_PI433 is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
CONFIG_PMC_ATOM=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_PSTORE=m
CONFIG_CROS_EC_CHARDEV=y
# CONFIG_CROS_EC_LPC is not set
CONFIG_CROS_EC_PROTO=y
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
CONFIG_COMMON_CLK_WM831X=m
# CONFIG_CLK_HSDK is not set
CONFIG_COMMON_CLK_MAX77686=m
# CONFIG_COMMON_CLK_SI5351 is not set
CONFIG_COMMON_CLK_SI514=y
CONFIG_COMMON_CLK_SI570=m
CONFIG_COMMON_CLK_CDCE706=m
# CONFIG_COMMON_CLK_CDCE925 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
CONFIG_COMMON_CLK_S2MPS11=y
# CONFIG_COMMON_CLK_NXP is not set
# CONFIG_COMMON_CLK_PXA is not set
# CONFIG_COMMON_CLK_PIC32 is not set
CONFIG_COMMON_CLK_VC5=m
CONFIG_HWSPINLOCK=m

#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#

#
# Broadcom SoC drivers
#

#
# i.MX SoC drivers
#

#
# Qualcomm SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
CONFIG_SOC_TI=y
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
CONFIG_DEVFREQ_GOV_POWERSAVE=m
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_ARIZONA=m
CONFIG_EXTCON_GPIO=y
# CONFIG_EXTCON_INTEL_INT3496 is not set
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77693=m
# CONFIG_EXTCON_RT8973A is not set
CONFIG_EXTCON_SM5502=m
CONFIG_EXTCON_USB_GPIO=m
CONFIG_EXTCON_USBC_CROS_EC=y
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
CONFIG_IIO_TRIGGERED_EVENT=m

#
# Accelerometers
#
# CONFIG_BMA180 is not set
CONFIG_BMA220=y
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
CONFIG_BMC150_ACCEL_SPI=m
CONFIG_DA280=m
CONFIG_DA311=m
CONFIG_DMARD06=y
# CONFIG_DMARD09 is not set
# CONFIG_DMARD10 is not set
CONFIG_HID_SENSOR_ACCEL_3D=m
# CONFIG_KXSD9 is not set
CONFIG_KXCJK1013=y
CONFIG_MC3230=m
CONFIG_MMA7455=m
CONFIG_MMA7455_I2C=m
CONFIG_MMA7455_SPI=m
# CONFIG_MMA7660 is not set
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=m
# CONFIG_MMA9551 is not set
CONFIG_MMA9553=m
CONFIG_MXC4005=y
# CONFIG_MXC6255 is not set
CONFIG_SCA3000=y
CONFIG_STK8312=m
CONFIG_STK8BA50=m

#
# Analog to digital converters
#
# CONFIG_AD7266 is not set
# CONFIG_AD7291 is not set
CONFIG_AD7298=m
CONFIG_AD7476=y
# CONFIG_AD7766 is not set
# CONFIG_AD7791 is not set
# CONFIG_AD7793 is not set
CONFIG_AD7887=m
CONFIG_AD7923=y
CONFIG_AD799X=y
# CONFIG_CC10001_ADC is not set
CONFIG_CPCAP_ADC=m
CONFIG_DA9150_GPADC=m
# CONFIG_DLN2_ADC is not set
# CONFIG_ENVELOPE_DETECTOR is not set
CONFIG_HI8435=m
# CONFIG_HX711 is not set
CONFIG_INA2XX_ADC=m
CONFIG_LP8788_ADC=y
# CONFIG_LTC2471 is not set
CONFIG_LTC2485=y
CONFIG_LTC2497=m
CONFIG_MAX1027=m
CONFIG_MAX11100=y
# CONFIG_MAX1118 is not set
# CONFIG_MAX1363 is not set
# CONFIG_MAX9611 is not set
# CONFIG_MCP320X is not set
CONFIG_MCP3422=y
CONFIG_NAU7802=y
CONFIG_QCOM_VADC_COMMON=m
CONFIG_QCOM_SPMI_IADC=m
CONFIG_QCOM_SPMI_VADC=m
# CONFIG_STX104 is not set
CONFIG_TI_ADC081C=m
# CONFIG_TI_ADC0832 is not set
# CONFIG_TI_ADC084S021 is not set
# CONFIG_TI_ADC12138 is not set
CONFIG_TI_ADC108S102=m
CONFIG_TI_ADC128S052=y
CONFIG_TI_ADC161S626=y
# CONFIG_TI_ADS1015 is not set
# CONFIG_TI_ADS7950 is not set
CONFIG_TI_ADS8688=m
# CONFIG_TI_AM335X_ADC is not set
CONFIG_TI_TLC4541=m
# CONFIG_TWL4030_MADC is not set
# CONFIG_TWL6030_GPADC is not set
CONFIG_VF610_ADC=y

#
# Amplifiers
#
# CONFIG_AD8366 is not set

#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
CONFIG_CCS811=m
CONFIG_IAQCORE=m
CONFIG_VZ89X=m
# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
CONFIG_IIO_MS_SENSORS_I2C=y

#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=m
CONFIG_IIO_SSP_SENSORHUB=y
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Counters
#
CONFIG_104_QUAD_8=y

#
# Digital to analog converters
#
CONFIG_AD5064=m
CONFIG_AD5360=y
CONFIG_AD5380=m
# CONFIG_AD5421 is not set
CONFIG_AD5446=m
# CONFIG_AD5449 is not set
CONFIG_AD5592R_BASE=y
CONFIG_AD5592R=m
CONFIG_AD5593R=y
CONFIG_AD5504=m
# CONFIG_AD5624R_SPI is not set
CONFIG_LTC2632=y
CONFIG_AD5686=m
CONFIG_AD5755=m
CONFIG_AD5761=y
CONFIG_AD5764=m
CONFIG_AD5791=m
CONFIG_AD7303=m
# CONFIG_CIO_DAC is not set
CONFIG_AD8801=m
CONFIG_DPOT_DAC=y
CONFIG_M62332=m
# CONFIG_MAX517 is not set
CONFIG_MAX5821=m
# CONFIG_MCP4725 is not set
CONFIG_MCP4922=m
CONFIG_VF610_DAC=y

#
# IIO dummy driver
#
CONFIG_IIO_SIMPLE_DUMMY=m
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
CONFIG_AD9523=m

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=m

#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=m
CONFIG_ADIS16130=m
# CONFIG_ADIS16136 is not set
CONFIG_ADIS16260=m
# CONFIG_ADXRS450 is not set
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_BMG160_SPI=m
CONFIG_HID_SENSOR_GYRO_3D=m
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
# CONFIG_ITG3200 is not set

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4403=y
# CONFIG_AFE4404 is not set
# CONFIG_MAX30100 is not set
CONFIG_MAX30102=y

#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
CONFIG_HDC100X=y
CONFIG_HID_SENSOR_HUMIDITY=m
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTS221_SPI=y
# CONFIG_HTU21 is not set
# CONFIG_SI7005 is not set
CONFIG_SI7020=y

#
# Inertial measurement units
#
CONFIG_ADIS16400=m
CONFIG_ADIS16480=m
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
# CONFIG_BMI160_SPI is not set
CONFIG_KMX61=y
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
CONFIG_INV_MPU6050_SPI=m
CONFIG_IIO_ST_LSM6DSX=y
CONFIG_IIO_ST_LSM6DSX_I2C=y
CONFIG_IIO_ST_LSM6DSX_SPI=y
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y

#
# Light sensors
#
# CONFIG_ACPI_ALS is not set
CONFIG_ADJD_S311=y
CONFIG_AL3320A=y
CONFIG_APDS9300=m
# CONFIG_APDS9960 is not set
CONFIG_BH1750=y
CONFIG_BH1780=m
# CONFIG_CM32181 is not set
# CONFIG_CM3232 is not set
CONFIG_CM3323=y
CONFIG_CM3605=y
CONFIG_CM36651=m
CONFIG_GP2AP020A00F=m
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=m
CONFIG_ISL29125=y
# CONFIG_HID_SENSOR_ALS is not set
CONFIG_HID_SENSOR_PROX=m
# CONFIG_JSA1212 is not set
CONFIG_RPR0521=m
# CONFIG_SENSORS_LM3533 is not set
CONFIG_LTR501=m
# CONFIG_MAX44000 is not set
# CONFIG_OPT3001 is not set
CONFIG_PA12203001=y
CONFIG_SI1145=y
CONFIG_STK3310=m
CONFIG_TCS3414=y
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=m
CONFIG_TSL4531=y
CONFIG_US5182D=y
# CONFIG_VCNL4000 is not set
CONFIG_VEML6070=y
CONFIG_VL6180=y

#
# Magnetometer sensors
#
CONFIG_AK8974=y
CONFIG_AK8975=m
# CONFIG_AK09911 is not set
CONFIG_BMC150_MAGN=m
CONFIG_BMC150_MAGN_I2C=m
# CONFIG_BMC150_MAGN_SPI is not set
CONFIG_MAG3110=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
# CONFIG_MMC35240 is not set
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
CONFIG_SENSORS_HMC5843_SPI=m

#
# Multiplexers
#
CONFIG_IIO_MUX=m

#
# Inclinometer sensors
#
# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
CONFIG_HID_SENSOR_DEVICE_ROTATION=m

#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=m
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
# CONFIG_IIO_SYSFS_TRIGGER is not set

#
# Digital potentiometers
#
# CONFIG_DS1803 is not set
# CONFIG_MAX5481 is not set
# CONFIG_MAX5487 is not set
CONFIG_MCP4131=y
CONFIG_MCP4531=m
# CONFIG_TPL0102 is not set

#
# Digital potentiostats
#
CONFIG_LMP91000=y

#
# Pressure sensors
#
CONFIG_ABP060MG=m
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_BMP280_SPI=y
# CONFIG_HID_SENSOR_PRESS is not set
# CONFIG_HP03 is not set
CONFIG_MPL115=y
CONFIG_MPL115_I2C=m
CONFIG_MPL115_SPI=y
CONFIG_MPL3115=m
# CONFIG_MS5611 is not set
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_IIO_ST_PRESS_SPI=y
CONFIG_T5403=y
CONFIG_HP206C=m
CONFIG_ZPA2326=m
CONFIG_ZPA2326_I2C=m
CONFIG_ZPA2326_SPI=m

#
# Lightning sensors
#
CONFIG_AS3935=m

#
# Proximity and distance sensors
#
# CONFIG_LIDAR_LITE_V2 is not set
CONFIG_SRF04=m
CONFIG_SX9500=m
# CONFIG_SRF08 is not set

#
# Temperature sensors
#
# CONFIG_MAXIM_THERMOCOUPLE is not set
CONFIG_HID_SENSOR_TEMP=m
# CONFIG_MLX90614 is not set
CONFIG_TMP006=y
CONFIG_TMP007=y
CONFIG_TSYS01=y
# CONFIG_TSYS02D is not set
CONFIG_NTB=y
# CONFIG_NTB_IDT is not set
CONFIG_NTB_PINGPONG=m
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=y
# CONFIG_VME_TSI148 is not set
# CONFIG_VME_FAKE is not set

#
# VME Board Drivers
#
# CONFIG_VMIVME_7805 is not set

#
# VME Device Drivers
#
CONFIG_VME_USER=m
CONFIG_VME_PIO2=m
# CONFIG_PWM is not set
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_LANTIQ is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STM32 is not set
# CONFIG_RESET_SUNXI is not set
CONFIG_RESET_TI_SYSCON=y
# CONFIG_RESET_ZYNQ is not set
# CONFIG_RESET_TEGRA_BPMP is not set
CONFIG_FMC=m
CONFIG_FMC_FAKEDEV=m
# CONFIG_FMC_TRIVIAL is not set
CONFIG_FMC_WRITE_EEPROM=m
# CONFIG_FMC_CHARDEV is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_BCM_KONA_USB2_PHY=m
CONFIG_PHY_PXA_28NM_HSIC=y
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_CPCAP_USB is not set
CONFIG_PHY_QCOM_USB_HS=m
CONFIG_PHY_QCOM_USB_HSIC=m
CONFIG_PHY_TUSB1210=m
CONFIG_POWERCAP=y
# CONFIG_INTEL_RAPL is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
CONFIG_THUNDERBOLT=y

#
# Android
#
CONFIG_ANDROID=y
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
# CONFIG_ANDROID_BINDER_IPC_32BIT is not set
# CONFIG_ANDROID_BINDER_IPC_SELFTEST is not set
CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_NVMEM=y
# CONFIG_STM is not set
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
# CONFIG_INTEL_TH_GTH is not set
CONFIG_INTEL_TH_MSU=m
# CONFIG_INTEL_TH_PTI is not set
# CONFIG_INTEL_TH_DEBUG is not set
CONFIG_FPGA=m
# CONFIG_FPGA_MGR_ICE40_SPI is not set
# CONFIG_FPGA_MGR_ALTERA_CVP is not set
CONFIG_FPGA_MGR_ALTERA_PS_SPI=m
# CONFIG_FPGA_MGR_XILINX_SPI is not set
# CONFIG_FPGA_BRIDGE is not set
CONFIG_ALTERA_PR_IP_CORE=m
CONFIG_ALTERA_PR_IP_CORE_PLAT=m

#
# FSI support
#
# CONFIG_FSI is not set
CONFIG_MULTIPLEXER=m

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=m
CONFIG_MUX_GPIO=m
# CONFIG_MUX_MMIO is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
CONFIG_GOOGLE_FIRMWARE=y
CONFIG_GOOGLE_COREBOOT_TABLE=m
# CONFIG_GOOGLE_COREBOOT_TABLE_ACPI is not set
CONFIG_GOOGLE_COREBOOT_TABLE_OF=m
CONFIG_GOOGLE_MEMCONSOLE=m
CONFIG_GOOGLE_MEMCONSOLE_COREBOOT=m
CONFIG_GOOGLE_VPD=m
# CONFIG_EFI_DEV_PATH_PARSER is not set

#
# Tegra firmware driver
#

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
# CONFIG_OVERLAY_FS_INDEX is not set

#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=m
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=m
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
CONFIG_NLS_MAC_TURKISH=m
# CONFIG_NLS_UTF8 is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_PAGE_POISONING=y
CONFIG_PAGE_POISONING_NO_SANITY=y
# CONFIG_PAGE_POISONING_ZERO is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
CONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_DEBUG_HIGHMEM=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHED_INFO is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
CONFIG_TORTURE_TEST=m
CONFIG_RCU_PERF_TEST=m
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
CONFIG_RCU_EQS_DEBUG=y
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAIL_FUTEX is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
CONFIG_PROFILE_ANNOTATED_BRANCHES=y
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BRANCH_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KPROBE_EVENTS is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_HIST_TRIGGERS is not set
CONFIG_TRACEPOINT_BENCHMARK=y
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set

#
# Runtime Testing
#
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=m
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_TEST_HEXDUMP=m
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=m
CONFIG_TEST_PRINTF=y
CONFIG_TEST_BITMAP=m
CONFIG_TEST_UUID=y
# CONFIG_TEST_RHASHTABLE is not set
CONFIG_TEST_HASH=m
CONFIG_TEST_LKM=m
CONFIG_TEST_USER_COPY=m
# CONFIG_TEST_BPF is not set
CONFIG_TEST_FIRMWARE=m
# CONFIG_TEST_SYSCTL is not set
CONFIG_TEST_UDELAY=m
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_DEBUG_VIRTUAL is not set
# CONFIG_MEMTEST is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_WX=y
# CONFIG_DOUBLEFAULT is not set
CONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_ENTRY is not set
CONFIG_DEBUG_NMI_SELFTEST=y
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_FRAME_POINTER_UNWINDER=y
# CONFIG_GUESS_UNWINDER is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=m
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
# CONFIG_SECURITY_WRITABLE_HOOKS is not set
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_PATH=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_MCRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_CRC32C_INTEL=m
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_586 is not set
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set

#
# Certificates for signature checking
#
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=m
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_BIT=y
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
# CONFIG_LIBCRC32C is not set
CONFIG_CRC8=m
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not set
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
# CONFIG_DMA_NOOP_OPS is not set
# CONFIG_DMA_VIRT_OPS is not set
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
# CONFIG_IRQ_POLL is not set
CONFIG_FONT_SUPPORT=m
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
# CONFIG_SG_SPLIT is not set
# CONFIG_SG_POOL is not set
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_PRIME_NUMBERS=m
# CONFIG_STRING_SELFTEST is not set

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 3852 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='trinity'
	export testcase='trinity'
	export runtime=300
	export job_origin='/lkp/lkp/src/allot/rand/vm-lkp-wsx03-openwrt-i386/trinity.yaml'
	export testbox='vm-lkp-wsx03-openwrt-i386-31'
	export tbox_group='vm-lkp-wsx03-openwrt-i386'
	export kconfig='i386-randconfig-b0-10280741'
	export compiler='gcc-5'
	export queue='bisect'
	export branch='linux-devel/devel-spot-201710280538'
	export commit='eb948c71f790f4fd27440895ca19180a78fd3016'
	export submit_id='59f402650b9a93d6bd28d069'
	export job_file='/lkp/scheduled/vm-lkp-wsx03-openwrt-i386-31/trinity-300s-openwrt-i386-2016-03-16.cgz-eb948c71f790f4fd27440895ca19180a78fd3016-20171028-54973-fdsy20-0.yaml'
	export id='93513807ff060ca4b2eceacc6495556212f444dc'
	export model='qemu-system-i386 -enable-kvm'
	export nr_vm=32
	export nr_cpu=1
	export memory='320M'
	export rootfs='openwrt-i386-2016-03-16.cgz'
	export hdd_partitions='/dev/vda'
	export swap_partitions='/dev/vdb'
	export need_kconfig='CONFIG_KVM_GUEST=y'
	export enqueue_time='2017-10-28 12:07:02 +0800'
	export _id='59f402650b9a93d6bd28d069'
	export _rt='/result/trinity/300s/vm-lkp-wsx03-openwrt-i386/openwrt-i386-2016-03-16.cgz/i386-randconfig-b0-10280741/gcc-5/eb948c71f790f4fd27440895ca19180a78fd3016'
	export user='lkp'
	export result_root='/result/trinity/300s/vm-lkp-wsx03-openwrt-i386/openwrt-i386-2016-03-16.cgz/i386-randconfig-b0-10280741/gcc-5/eb948c71f790f4fd27440895ca19180a78fd3016/0'
	export LKP_SERVER='inn'
	export max_uptime=1500
	export initrd='/osimage/openwrt/openwrt-i386-2016-03-16.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/scheduled/vm-lkp-wsx03-openwrt-i386-31/trinity-300s-openwrt-i386-2016-03-16.cgz-eb948c71f790f4fd27440895ca19180a78fd3016-20171028-54973-fdsy20-0.yaml
ARCH=i386
kconfig=i386-randconfig-b0-10280741
branch=linux-devel/devel-spot-201710280538
commit=eb948c71f790f4fd27440895ca19180a78fd3016
BOOT_IMAGE=/pkg/linux/i386-randconfig-b0-10280741/gcc-5/eb948c71f790f4fd27440895ca19180a78fd3016/vmlinuz-4.14.0-rc6-00022-geb948c7
max_uptime=1500
RESULT_ROOT=/result/trinity/300s/vm-lkp-wsx03-openwrt-i386/openwrt-i386-2016-03-16.cgz/i386-randconfig-b0-10280741/gcc-5/eb948c71f790f4fd27440895ca19180a78fd3016/0
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
	export lkp_initrd='/lkp/lkp/lkp-i386.cgz'
	export modules_initrd='/pkg/linux/i386-randconfig-b0-10280741/gcc-5/eb948c71f790f4fd27440895ca19180a78fd3016/modules.cgz'
	export bm_initrd='/osimage/pkg/static/trinity-i386.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export kernel='/pkg/linux/i386-randconfig-b0-10280741/gcc-5/eb948c71f790f4fd27440895ca19180a78fd3016/vmlinuz-4.14.0-rc6-00022-geb948c7'
	export dequeue_time='2017-10-28 12:18:43 +0800'
	export job_initrd='/lkp/scheduled/vm-lkp-wsx03-openwrt-i386-31/trinity-300s-openwrt-i386-2016-03-16.cgz-eb948c71f790f4fd27440895ca19180a78fd3016-20171028-54973-fdsy20-0.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog

	run_test $LKP_SRC/tests/wrapper trinity
}

extract_stats()
{
	$LKP_SRC/stats/wrapper kmsg

	$LKP_SRC/stats/wrapper time trinity.time
	$LKP_SRC/stats/wrapper time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper last_state
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/x-xz, Size: 11700 bytes --]