[PATCH 8/9] extcon: max8997: Set default UART/USB path on probe

[PATCH 8/9] extcon: max8997: Set default UART/USB path on probe

[Chanwoo Choi]

This patch set default H/W line path according to platfomr data.
The MAX8997 MUIC device can possibly set UART/USB or UART_AUX
/USB_AUX to internal H/W line path of MUIC device. Namely, only
one H/W line is used for two operation.

For example,
if H/W line path of MAX8997 device set UART/USB, micro usb cable
is connected to AP(Application Processor) and if H/W line path
set UART_AUX/USB_AUX, micro usb cable is connected to CP(Coprocessor).

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
---
 drivers/extcon/extcon-max8997.c | 28 ++++++++++++++++++++++++++--
 include/linux/mfd/max8997.h     |  7 +++++++
 2 files changed, 33 insertions(+), 2 deletions(-)

diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 35338a0..349f65f 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -127,6 +127,13 @@ struct max8997_muic_info {
 
 	struct max8997_muic_platform_data *muic_pdata;
 	enum max8997_muic_charger_type pre_charger_type;
+
+	/*
+	 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+	 * h/w path of COMP2/COMN1 on CONTROL1 register.
+	 */
+	int path_usb;
+	int path_uart;
 };
 
 enum {
@@ -322,7 +329,7 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info,
 	int ret = 0;
 
 	if (usb_type == MAX8997_USB_HOST) {
-		ret = max8997_muic_set_path(info, CONTROL1_SW_USB, attached);
+		ret = max8997_muic_set_path(info, info->path_usb, attached);
 		if (ret < 0) {
 			dev_err(info->dev, "failed to update muic register\n");
 			return ret;
@@ -378,7 +385,7 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
 	int ret = 0;
 
 	/* switch to UART */
-	ret = max8997_muic_set_path(info, CONTROL1_SW_UART, attached);
+	ret = max8997_muic_set_path(info, info->path_uart, attached);
 	if (ret) {
 		dev_err(info->dev, "failed to update muic register\n");
 		return -EINVAL;
@@ -694,6 +701,23 @@ static int max8997_muic_probe(struct platform_device *pdev)
 		}
 	}
 
+	/*
+	 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+	 * h/w path of COMP2/COMN1 on CONTROL1 register.
+	 */
+	if (pdata->muic_pdata->path_uart)
+		info->path_uart = pdata->muic_pdata->path_uart;
+	else
+		info->path_uart = CONTROL1_SW_UART;
+
+	if (pdata->muic_pdata->path_usb)
+		info->path_usb = pdata->muic_pdata->path_usb;
+	else
+		info->path_usb = CONTROL1_SW_USB;
+
+	/* Set initial path for UART */
+	 max8997_muic_set_path(info, info->path_uart, true);
+
 	/* Set ADC debounce time */
 	max8997_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS);
 
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index 65f8d6a..2d2d67b 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -92,6 +92,13 @@ struct max8997_muic_reg_data {
 struct max8997_muic_platform_data {
 	struct max8997_muic_reg_data *init_data;
 	int num_init_data;
+
+	/*
+	 * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB
+	 * h/w path of COMP2/COMN1 on CONTROL1 register.
+	 */
+	int path_usb;
+	int path_uart;
 };
 
 enum max8997_haptic_motor_type {
-- 
1.8.0