linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 1/2] video: fbdev: pxafb: loosen the platform data bond
@ 2015-11-16 21:36 Robert Jarzmik
  2015-11-16 21:36 ` [PATCH v4 2/2] video: fbdev: pxafb: initial devicetree conversion Robert Jarzmik
  0 siblings, 1 reply; 3+ messages in thread
From: Robert Jarzmik @ 2015-11-16 21:36 UTC (permalink / raw)
  To: Jean-Christophe Plagniol-Villard, Tomi Valkeinen
  Cc: linux-fbdev, linux-kernel, Robert Jarzmik

In order to prepare the transition to a mixed platform data and
device-tree initialization, remove all the platform data references all
over the driver.

Copy the platform data into the internal structure of the pxafb, and
only use this afterward.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
 drivers/video/fbdev/pxafb.c | 54 ++++++++++++++++++++++++++++-----------------
 drivers/video/fbdev/pxafb.h |  2 ++
 2 files changed, 36 insertions(+), 20 deletions(-)

diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
index 94813af97f09..ed4b1a5dc306 100644
--- a/drivers/video/fbdev/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
@@ -457,7 +457,7 @@ static int pxafb_adjust_timing(struct pxafb_info *fbi,
 static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
 	struct pxafb_info *fbi = container_of(info, struct pxafb_info, fb);
-	struct pxafb_mach_info *inf = dev_get_platdata(fbi->dev);
+	struct pxafb_mach_info *inf = fbi->inf;
 	int err;
 
 	if (inf->fixed_modes) {
@@ -1230,7 +1230,7 @@ static unsigned int __smart_timing(unsigned time_ns, unsigned long lcd_clk)
 static void setup_smart_timing(struct pxafb_info *fbi,
 				struct fb_var_screeninfo *var)
 {
-	struct pxafb_mach_info *inf = dev_get_platdata(fbi->dev);
+	struct pxafb_mach_info *inf = fbi->inf;
 	struct pxafb_mode_info *mode = &inf->modes[0];
 	unsigned long lclk = clk_get_rate(fbi->clk);
 	unsigned t1, t2, t3, t4;
@@ -1258,14 +1258,13 @@ static void setup_smart_timing(struct pxafb_info *fbi,
 static int pxafb_smart_thread(void *arg)
 {
 	struct pxafb_info *fbi = arg;
-	struct pxafb_mach_info *inf = dev_get_platdata(fbi->dev);
+	struct pxafb_mach_info *inf = fbi->inf;
 
 	if (!inf->smart_update) {
 		pr_err("%s: not properly initialized, thread terminated\n",
 				__func__);
 		return -EINVAL;
 	}
-	inf = dev_get_platdata(fbi->dev);
 
 	pr_debug("%s(): task starting\n", __func__);
 
@@ -1788,11 +1787,11 @@ decode_mode:
 		fbi->video_mem_size = video_mem_size;
 }
 
-static struct pxafb_info *pxafb_init_fbinfo(struct device *dev)
+static struct pxafb_info *pxafb_init_fbinfo(struct device *dev,
+					    struct pxafb_mach_info *inf)
 {
 	struct pxafb_info *fbi;
 	void *addr;
-	struct pxafb_mach_info *inf = dev_get_platdata(dev);
 
 	/* Alloc the pxafb_info and pseudo_palette in one step */
 	fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL);
@@ -1801,6 +1800,7 @@ static struct pxafb_info *pxafb_init_fbinfo(struct device *dev)
 
 	memset(fbi, 0, sizeof(struct pxafb_info));
 	fbi->dev = dev;
+	fbi->inf = inf;
 
 	fbi->clk = clk_get(dev, NULL);
 	if (IS_ERR(fbi->clk)) {
@@ -1852,10 +1852,9 @@ static struct pxafb_info *pxafb_init_fbinfo(struct device *dev)
 }
 
 #ifdef CONFIG_FB_PXA_PARAMETERS
-static int parse_opt_mode(struct device *dev, const char *this_opt)
+static int parse_opt_mode(struct device *dev, const char *this_opt,
+			  struct pxafb_mach_info *inf)
 {
-	struct pxafb_mach_info *inf = dev_get_platdata(dev);
-
 	const char *name = this_opt+5;
 	unsigned int namelen = strlen(name);
 	int res_specified = 0, bpp_specified = 0;
@@ -1911,9 +1910,9 @@ done:
 	return 0;
 }
 
-static int parse_opt(struct device *dev, char *this_opt)
+static int parse_opt(struct device *dev, char *this_opt,
+		     struct pxafb_mach_info *inf)
 {
-	struct pxafb_mach_info *inf = dev_get_platdata(dev);
 	struct pxafb_mode_info *mode = &inf->modes[0];
 	char s[64];
 
@@ -1922,7 +1921,7 @@ static int parse_opt(struct device *dev, char *this_opt)
 	if (!strncmp(this_opt, "vmem:", 5)) {
 		video_mem_size = memparse(this_opt + 5, NULL);
 	} else if (!strncmp(this_opt, "mode:", 5)) {
-		return parse_opt_mode(dev, this_opt);
+		return parse_opt_mode(dev, this_opt, inf);
 	} else if (!strncmp(this_opt, "pixclock:", 9)) {
 		mode->pixclock = simple_strtoul(this_opt+9, NULL, 0);
 		sprintf(s, "pixclock: %ld\n", mode->pixclock);
@@ -2011,7 +2010,8 @@ static int parse_opt(struct device *dev, char *this_opt)
 	return 0;
 }
 
-static int pxafb_parse_options(struct device *dev, char *options)
+static int pxafb_parse_options(struct device *dev, char *options,
+			       struct pxafb_mach_info *inf)
 {
 	char *this_opt;
 	int ret;
@@ -2023,7 +2023,7 @@ static int pxafb_parse_options(struct device *dev, char *options)
 
 	/* could be made table driven or similar?... */
 	while ((this_opt = strsep(&options, ",")) != NULL) {
-		ret = parse_opt(dev, this_opt);
+		ret = parse_opt(dev, this_opt, inf);
 		if (ret)
 			return ret;
 	}
@@ -2095,19 +2095,33 @@ static void pxafb_check_options(struct device *dev, struct pxafb_mach_info *inf)
 static int pxafb_probe(struct platform_device *dev)
 {
 	struct pxafb_info *fbi;
-	struct pxafb_mach_info *inf;
+	struct pxafb_mach_info *inf, *pdata;
 	struct resource *r;
-	int irq, ret;
+	int i, irq, ret;
 
 	dev_dbg(&dev->dev, "pxafb_probe\n");
 
-	inf = dev_get_platdata(&dev->dev);
 	ret = -ENOMEM;
-	fbi = NULL;
+	pdata = dev_get_platdata(&dev->dev);
+	inf = devm_kmalloc(&dev->dev, sizeof(*inf), GFP_KERNEL);
 	if (!inf)
 		goto failed;
+	if (pdata) {
+		*inf = *pdata;
+		inf->modes =
+			devm_kmalloc_array(&dev->dev, pdata->num_modes,
+					   sizeof(inf->modes[0]), GFP_KERNEL);
+		if (!inf->modes)
+			goto failed;
+		for (i = 0; i < inf->num_modes; i++)
+			inf->modes[i] = pdata->modes[i];
+	}
+
+	fbi = NULL;
+	if (!pdata)
+		goto failed;
 
-	ret = pxafb_parse_options(&dev->dev, g_options);
+	ret = pxafb_parse_options(&dev->dev, g_options, inf);
 	if (ret < 0)
 		goto failed;
 
@@ -2125,7 +2139,7 @@ static int pxafb_probe(struct platform_device *dev)
 		goto failed;
 	}
 
-	fbi = pxafb_init_fbinfo(&dev->dev);
+	fbi = pxafb_init_fbinfo(&dev->dev, inf);
 	if (!fbi) {
 		/* only reason for pxafb_init_fbinfo to fail is kmalloc */
 		dev_err(&dev->dev, "Failed to initialize framebuffer device\n");
diff --git a/drivers/video/fbdev/pxafb.h b/drivers/video/fbdev/pxafb.h
index 26ba9fa3f737..5dc414e26fc8 100644
--- a/drivers/video/fbdev/pxafb.h
+++ b/drivers/video/fbdev/pxafb.h
@@ -167,6 +167,8 @@ struct pxafb_info {
 
 	void (*lcd_power)(int, struct fb_var_screeninfo *);
 	void (*backlight_power)(int);
+
+	struct pxafb_mach_info	*inf;
 };
 
 #define TO_INF(ptr,member) container_of(ptr,struct pxafb_info,member)
-- 
2.1.4


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH v4 2/2] video: fbdev: pxafb: initial devicetree conversion
  2015-11-16 21:36 [PATCH v4 1/2] video: fbdev: pxafb: loosen the platform data bond Robert Jarzmik
@ 2015-11-16 21:36 ` Robert Jarzmik
  2015-11-17  0:01   ` kbuild test robot
  0 siblings, 1 reply; 3+ messages in thread
From: Robert Jarzmik @ 2015-11-16 21:36 UTC (permalink / raw)
  To: Jean-Christophe Plagniol-Villard, Tomi Valkeinen
  Cc: linux-fbdev, linux-kernel, Robert Jarzmik

This patch brings a first support of pxa framebuffer devices to a
devicetree pxa platform, as was before platform data.

There are restrictions with this port, the biggest one being the lack of
support of smart panels. Moreover the conversion doesn't provide a way
to declare multiple framebuffer configurations with different bits per
pixel, only the LCD hardware bus width is used.

The patch was tested on both pxa25x, pxa27x and pxa3xx platform (namely
lubbock, mainstone and zylonite).

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
Since v1: Philipp's review: of_graph usage
Since v3: of_device_id sentinel, and all compatible ids added
---
 drivers/video/fbdev/Kconfig |   2 +
 drivers/video/fbdev/pxafb.c | 170 +++++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 169 insertions(+), 3 deletions(-)

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 8b1d371b5404..1a24ca5a0624 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1878,6 +1878,8 @@ config FB_PXA
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEOMODE_HELPERS if OF
+	select FB_MODE_HELPERS if OF
 	---help---
 	  Frame buffer driver for the built-in LCD controller in the Intel
 	  PXA2x0 processor.
diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
index ed4b1a5dc306..18ad4773d1f8 100644
--- a/drivers/video/fbdev/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
@@ -55,6 +55,9 @@
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 #include <linux/console.h>
+#include <linux/of_graph.h>
+#include <video/of_display_timing.h>
+#include <video/videomode.h>
 
 #include <mach/hardware.h>
 #include <asm/io.h>
@@ -2092,6 +2095,151 @@ static void pxafb_check_options(struct device *dev, struct pxafb_mach_info *inf)
 #define pxafb_check_options(...)	do {} while (0)
 #endif
 
+#if defined(CONFIG_OF)
+static const char * const lcd_types[] = {
+	"unknown", "mono-stn", "mono-dstn", "color-stn", "color-dstn",
+	"color-tft", "smart-panel", NULL
+};
+
+static int of_get_pxafb_display(struct device *dev, struct device_node *disp,
+				struct pxafb_mach_info *info, u32 bus_width)
+{
+	struct display_timings *timings;
+	struct videomode vm;
+	int i, ret = -EINVAL;
+	const char *s;
+
+	ret = of_property_read_string(disp, "lcd-type", &s);
+	if (ret)
+		s = "color-tft";
+
+	for (i = 0; lcd_types[i]; i++)
+		if (!strcmp(s, lcd_types[i]))
+			break;
+	if (!i || !lcd_types[i]) {
+		dev_err(dev, "lcd-type %s is unknown\n", s);
+		return -EINVAL;
+	}
+	info->lcd_conn |= LCD_CONN_TYPE(i);
+	info->lcd_conn |= LCD_CONN_WIDTH(bus_width);
+
+	timings = of_get_display_timings(disp);
+	if (!timings)
+		goto out;
+
+	ret = -ENOMEM;
+	info->modes = kmalloc_array(timings->num_timings,
+				    sizeof(info->modes[0]), GFP_KERNEL);
+	if (!info->modes)
+		goto out;
+	info->num_modes = timings->num_timings;
+
+	for (i = 0; i < timings->num_timings; i++) {
+		ret = videomode_from_timings(timings, &vm, i);
+		if (ret) {
+			dev_err(dev, "videomode_from_timings %d failed: %d\n",
+				i, ret);
+			goto out;
+		}
+		if (vm.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
+			info->lcd_conn |= LCD_PCLK_EDGE_RISE;
+		if (vm.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+			info->lcd_conn |= LCD_PCLK_EDGE_FALL;
+		if (vm.flags & DISPLAY_FLAGS_DE_HIGH)
+			info->lcd_conn |= LCD_BIAS_ACTIVE_HIGH;
+		if (vm.flags & DISPLAY_FLAGS_DE_LOW)
+			info->lcd_conn |= LCD_BIAS_ACTIVE_LOW;
+		if (vm.flags & DISPLAY_FLAGS_HSYNC_HIGH)
+			info->modes[i].sync |= FB_SYNC_HOR_HIGH_ACT;
+		if (vm.flags & DISPLAY_FLAGS_VSYNC_HIGH)
+			info->modes[i].sync |= FB_SYNC_VERT_HIGH_ACT;
+
+		info->modes[i].pixclock = 1000000000UL / (vm.pixelclock / 1000);
+		info->modes[i].xres = vm.hactive;
+		info->modes[i].yres = vm.vactive;
+		info->modes[i].hsync_len = vm.hsync_len;
+		info->modes[i].left_margin = vm.hback_porch;
+		info->modes[i].right_margin = vm.hfront_porch;
+		info->modes[i].vsync_len = vm.vsync_len;
+		info->modes[i].upper_margin = vm.vback_porch;
+		info->modes[i].lower_margin = vm.vfront_porch;
+	}
+	ret = 0;
+
+out:
+	display_timings_release(timings);
+	return ret;
+}
+
+static int of_get_pxafb_mode_info(struct device *dev,
+				  struct pxafb_mach_info *info)
+{
+	struct device_node *display, *np;
+	u32 bus_width, depth = 0;
+	int ret, i;
+
+	of_property_read_u32(dev->of_node, "depth", &depth);
+	np = of_graph_get_next_endpoint(dev->of_node, NULL);
+	if (!np) {
+		dev_err(dev, "could not find endpoint\n");
+		return -EINVAL;
+	}
+	ret = of_property_read_u32(np, "bus-width", &bus_width);
+	if (ret) {
+		dev_err(dev, "no bus-width specified: %d\n", ret);
+		return ret;
+	}
+
+	display = of_graph_get_remote_port_parent(np);
+	of_node_put(np);
+	if (!display) {
+		dev_err(dev, "no display defined\n");
+		return -EINVAL;
+	}
+
+	ret = of_get_pxafb_display(dev, display, info, bus_width);
+	of_node_put(display);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < info->num_modes; i++) {
+		info->modes[i].depth = depth;
+		info->modes[i].bpp = bus_width;
+	}
+
+	return 0;
+}
+
+static struct pxafb_mach_info *of_pxafb_of_mach_info(struct device *dev)
+{
+	int ret;
+	struct pxafb_mach_info *info;
+
+	if (!dev->of_node)
+		return NULL;
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return ERR_PTR(-ENOMEM);
+	ret = of_get_pxafb_mode_info(dev, info);
+	if (ret) {
+		kfree(info->modes);
+		return ERR_PTR(ret);
+	}
+
+	/*
+	 * On purpose, neither lccrX registers nor video memory size can be
+	 * specified through device-tree, they are considered more a debug hack
+	 * available through command line.
+	 */
+	return info;
+}
+#else
+static struct pxafb_mach_info *of_pxafb_of_mach_info(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
 static int pxafb_probe(struct platform_device *dev)
 {
 	struct pxafb_info *fbi;
@@ -2104,8 +2252,7 @@ static int pxafb_probe(struct platform_device *dev)
 	ret = -ENOMEM;
 	pdata = dev_get_platdata(&dev->dev);
 	inf = devm_kmalloc(&dev->dev, sizeof(*inf), GFP_KERNEL);
-	if (!inf)
-		goto failed;
+
 	if (pdata) {
 		*inf = *pdata;
 		inf->modes =
@@ -2117,8 +2264,9 @@ static int pxafb_probe(struct platform_device *dev)
 			inf->modes[i] = pdata->modes[i];
 	}
 
-	fbi = NULL;
 	if (!pdata)
+		inf = of_pxafb_of_mach_info(&dev->dev);
+	if (IS_ERR_OR_NULL(inf))
 		goto failed;
 
 	ret = pxafb_parse_options(&dev->dev, g_options, inf);
@@ -2313,11 +2461,27 @@ static int pxafb_remove(struct platform_device *dev)
 	return 0;
 }
 
+static const struct of_device_id pxafb_of_dev_id[] = {
+	{
+		.compatible = "marvell,pxa270-lcdc",
+	}, {
+	{
+		.compatible = "marvell,pxa300-lcdc",
+	}, {
+	{
+		.compatible = "marvell,pxa2xx-lcdc",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, pxafb_of_dev_id);
+
 static struct platform_driver pxafb_driver = {
 	.probe		= pxafb_probe,
 	.remove 	= pxafb_remove,
 	.driver		= {
 		.name	= "pxa2xx-fb",
+		.of_match_table = pxafb_of_dev_id,
 #ifdef CONFIG_PM
 		.pm	= &pxafb_pm_ops,
 #endif
-- 
2.1.4


^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH v4 2/2] video: fbdev: pxafb: initial devicetree conversion
  2015-11-16 21:36 ` [PATCH v4 2/2] video: fbdev: pxafb: initial devicetree conversion Robert Jarzmik
@ 2015-11-17  0:01   ` kbuild test robot
  0 siblings, 0 replies; 3+ messages in thread
From: kbuild test robot @ 2015-11-17  0:01 UTC (permalink / raw)
  To: Robert Jarzmik
  Cc: kbuild-all, Jean-Christophe Plagniol-Villard, Tomi Valkeinen,
	linux-fbdev, linux-kernel, Robert Jarzmik

[-- Attachment #1: Type: text/plain, Size: 2933 bytes --]

Hi Robert,

[auto build test ERROR on v4.4-rc1]
[also build test ERROR on next-20151116]

url:    https://github.com/0day-ci/linux/commits/Robert-Jarzmik/video-fbdev-pxafb-loosen-the-platform-data-bond/20151117-053946
config: arm-spitz_defconfig (attached as .config)
reproduce:
        wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All error/warnings (new ones prefixed by >>):

>> drivers/video/fbdev/pxafb.c:2469:3: error: field name not in record or union initializer
      .compatible = "marvell,pxa300-lcdc",
      ^
   drivers/video/fbdev/pxafb.c:2469:3: error: (near initialization for 'pxafb_of_dev_id[1].name')
>> drivers/video/fbdev/pxafb.c:2471:2: warning: braces around scalar initializer
     {
     ^
   drivers/video/fbdev/pxafb.c:2471:2: warning: (near initialization for 'pxafb_of_dev_id[1].type[0]')
   drivers/video/fbdev/pxafb.c:2472:3: error: field name not in record or union initializer
      .compatible = "marvell,pxa2xx-lcdc",
      ^
   drivers/video/fbdev/pxafb.c:2472:3: error: (near initialization for 'pxafb_of_dev_id[1].type[0]')
>> drivers/video/fbdev/pxafb.c:2472:3: warning: initialization makes integer from pointer without a cast
   drivers/video/fbdev/pxafb.c:2472:3: warning: (near initialization for 'pxafb_of_dev_id[1].type[0]')
>> drivers/video/fbdev/pxafb.c:2472:3: error: initializer element is not computable at load time
   drivers/video/fbdev/pxafb.c:2472:3: error: (near initialization for 'pxafb_of_dev_id[1].type[0]')
   drivers/video/fbdev/pxafb.c:2473:2: warning: braces around scalar initializer
     }, {
     ^
   drivers/video/fbdev/pxafb.c:2473:2: warning: (near initialization for 'pxafb_of_dev_id[1].type[1]')
>> drivers/video/fbdev/pxafb.c:2476:2: error: expected '}' before ';' token
    };
     ^
   drivers/video/fbdev/pxafb.c:2243:12: warning: 'pxafb_probe' defined but not used [-Wunused-function]
    static int pxafb_probe(struct platform_device *dev)
               ^
   drivers/video/fbdev/pxafb.c:2425:12: warning: 'pxafb_remove' defined but not used [-Wunused-function]
    static int pxafb_remove(struct platform_device *dev)
               ^

vim +2469 drivers/video/fbdev/pxafb.c

  2463	
  2464	static const struct of_device_id pxafb_of_dev_id[] = {
  2465		{
  2466			.compatible = "marvell,pxa270-lcdc",
  2467		}, {
  2468		{
> 2469			.compatible = "marvell,pxa300-lcdc",
  2470		}, {
> 2471		{
> 2472			.compatible = "marvell,pxa2xx-lcdc",
  2473		}, {
  2474			/* sentinel */
  2475		}
> 2476	};
  2477	MODULE_DEVICE_TABLE(of, pxafb_of_dev_id);
  2478	
  2479	static struct platform_driver pxafb_driver = {

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 18416 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2015-11-17  0:02 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-11-16 21:36 [PATCH v4 1/2] video: fbdev: pxafb: loosen the platform data bond Robert Jarzmik
2015-11-16 21:36 ` [PATCH v4 2/2] video: fbdev: pxafb: initial devicetree conversion Robert Jarzmik
2015-11-17  0:01   ` kbuild test robot

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).