* [PATCH 1/2] ARM: dts: uniphier: add STDMAC clock to EHCI nodes
@ 2017-10-20 5:16 Masahiro Yamada
2017-10-20 5:16 ` [PATCH 2/2] arm64: " Masahiro Yamada
0 siblings, 1 reply; 2+ messages in thread
From: Masahiro Yamada @ 2017-10-20 5:16 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Masahiro Yamada, devicetree, linux-kernel, Rob Herring,
Mark Rutland, Russell King
Without the STDMAC clock enabled, the USB 2.0 hosts do not work.
This clock must be explicitly listed in the "clocks" property because
it is independent from the other clocks.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
arch/arm/boot/dts/uniphier-ld4.dtsi | 9 ++++++---
arch/arm/boot/dts/uniphier-pro4.dtsi | 6 ++++--
arch/arm/boot/dts/uniphier-sld8.dtsi | 9 ++++++---
3 files changed, 16 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index 18f7e73..ecab5f3 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -258,7 +258,8 @@
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
- clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+ <&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
@@ -270,7 +271,8 @@
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
- clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+ <&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
@@ -282,7 +284,8 @@
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
- clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
+ <&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
};
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 6bbca27..688e356 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -308,7 +308,8 @@
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
- clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+ <&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
@@ -320,7 +321,8 @@
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb3>;
- clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+ <&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index 39cc0e0..782ca99 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -262,7 +262,8 @@
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
- clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+ <&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
@@ -274,7 +275,8 @@
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
- clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+ <&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
@@ -286,7 +288,8 @@
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
- clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
+ <&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
};
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 2/2] arm64: dts: uniphier: add STDMAC clock to EHCI nodes
2017-10-20 5:16 [PATCH 1/2] ARM: dts: uniphier: add STDMAC clock to EHCI nodes Masahiro Yamada
@ 2017-10-20 5:16 ` Masahiro Yamada
0 siblings, 0 replies; 2+ messages in thread
From: Masahiro Yamada @ 2017-10-20 5:16 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Masahiro Yamada, devicetree, linux-kernel, Rob Herring,
Will Deacon, Mark Rutland, Catalin Marinas
Without the STDMAC clock enabled, the USB 2.0 hosts do not work.
This clock must be explicitly listed in the "clocks" property because
it is independent from the other clocks.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index 99f14cc..2c03d96 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -324,7 +324,8 @@
interrupts = <0 243 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
- clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+ <&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
@@ -336,7 +337,8 @@
interrupts = <0 244 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
- clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+ <&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
@@ -348,7 +350,8 @@
interrupts = <0 245 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
- clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
+ <&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
};
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-10-20 5:17 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-10-20 5:16 [PATCH 1/2] ARM: dts: uniphier: add STDMAC clock to EHCI nodes Masahiro Yamada
2017-10-20 5:16 ` [PATCH 2/2] arm64: " Masahiro Yamada
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).