[PATCH 1/2] drm/bridge/sii8620: remove HSIC initialization

[PATCH 1/2] drm/bridge/sii8620: remove HSIC initialization

[Maciej Purski]

HSIC initialization was taken from the vendor code. HSIC in MHL circuit
is not connected, so it is not possible to test it. Tests prove that
without HSIC the device works well. Therefore it can be removed.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
---
 drivers/gpu/drm/bridge/sil-sii8620.c | 38 ------------------------------------
 1 file changed, 38 deletions(-)

diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c
index e81c96a..35ccc90 100644
--- a/drivers/gpu/drm/bridge/sil-sii8620.c
+++ b/drivers/gpu/drm/bridge/sil-sii8620.c
@@ -502,50 +502,12 @@ static void sii8620_sink_detected(struct sii8620 *ctx, int ret)
 		 sink_str[ctx->sink_type], sink_name);
 }
 
-static void sii8620_hsic_init(struct sii8620 *ctx)
-{
-	if (!sii8620_is_mhl3(ctx))
-		return;
-
-	sii8620_write(ctx, REG_FCGC,
-		BIT_FCGC_HSIC_HOSTMODE | BIT_FCGC_HSIC_ENABLE);
-	sii8620_setbits(ctx, REG_HRXCTRL3,
-		BIT_HRXCTRL3_HRX_STAY_RESET | BIT_HRXCTRL3_STATUS_EN, ~0);
-	sii8620_setbits(ctx, REG_TTXNUMB, MSK_TTXNUMB_TTX_NUMBPS, 4);
-	sii8620_setbits(ctx, REG_TRXCTRL, BIT_TRXCTRL_TRX_FROM_SE_COC, ~0);
-	sii8620_setbits(ctx, REG_HTXCTRL, BIT_HTXCTRL_HTX_DRVCONN1, 0);
-	sii8620_setbits(ctx, REG_KEEPER, MSK_KEEPER_MODE, VAL_KEEPER_MODE_HOST);
-	sii8620_write_seq_static(ctx,
-		REG_TDMLLCTL, 0,
-		REG_UTSRST, BIT_UTSRST_HRX_SRST | BIT_UTSRST_HTX_SRST |
-			BIT_UTSRST_KEEPER_SRST | BIT_UTSRST_FC_SRST,
-		REG_UTSRST, BIT_UTSRST_HRX_SRST | BIT_UTSRST_HTX_SRST,
-		REG_HRXINTL, 0xff,
-		REG_HRXINTH, 0xff,
-		REG_TTXINTL, 0xff,
-		REG_TTXINTH, 0xff,
-		REG_TRXINTL, 0xff,
-		REG_TRXINTH, 0xff,
-		REG_HTXINTL, 0xff,
-		REG_HTXINTH, 0xff,
-		REG_FCINTR0, 0xff,
-		REG_FCINTR1, 0xff,
-		REG_FCINTR2, 0xff,
-		REG_FCINTR3, 0xff,
-		REG_FCINTR4, 0xff,
-		REG_FCINTR5, 0xff,
-		REG_FCINTR6, 0xff,
-		REG_FCINTR7, 0xff
-	);
-}
-
 static void sii8620_edid_read(struct sii8620 *ctx, int ret)
 {
 	if (ret < 0)
 		return;
 
 	sii8620_set_upstream_edid(ctx);
-	sii8620_hsic_init(ctx);
 	sii8620_enable_hpd(ctx);
 }
 
-- 
2.7.4

[PATCH 2/2] drm/bridge/sii8620: fix HDMI cable connection to dongle

[Maciej Purski]

MHL bridge is usually connected to TV via MHL dongle. Currently plugging
HDMI cable to dongle is handled improperly. This patch fixes it.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
---
 drivers/gpu/drm/bridge/sil-sii8620.c | 49 ++++++++++++++++++++----------------
 1 file changed, 27 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c
index 35ccc90..857d2cb5 100644
--- a/drivers/gpu/drm/bridge/sil-sii8620.c
+++ b/drivers/gpu/drm/bridge/sil-sii8620.c
@@ -78,6 +78,7 @@ struct sii8620 {
 	u8 devcap[MHL_DCAP_SIZE];
 	u8 xdevcap[MHL_XDC_SIZE];
 	u8 avif[HDMI_INFOFRAME_SIZE(AVI)];
+	bool feature_complete;
 	struct edid *edid;
 	unsigned int gen2_write_burst:1;
 	enum sii8620_mt_state mt_state;
@@ -470,7 +471,7 @@ static void sii8620_update_array(u8 *dst, u8 *src, int count)
 	}
 }
 
-static void sii8620_sink_detected(struct sii8620 *ctx, int ret)
+static void sii8620_hpd_plugged(struct sii8620 *ctx)
 {
 	static const char * const sink_str[] = {
 		[SINK_NONE] = "NONE",
@@ -481,15 +482,13 @@ static void sii8620_sink_detected(struct sii8620 *ctx, int ret)
 	char sink_name[20];
 	struct device *dev = ctx->dev;
 
-	if (ret < 0)
-		return;
-
 	sii8620_fetch_edid(ctx);
 	if (!ctx->edid) {
 		dev_err(ctx->dev, "Cannot fetch EDID\n");
 		sii8620_mhl_disconnected(ctx);
 		return;
 	}
+	sii8620_set_upstream_edid(ctx);
 
 	if (drm_detect_hdmi_monitor(ctx->edid))
 		ctx->sink_type = SINK_HDMI;
@@ -502,15 +501,6 @@ static void sii8620_sink_detected(struct sii8620 *ctx, int ret)
 		 sink_str[ctx->sink_type], sink_name);
 }
 
-static void sii8620_edid_read(struct sii8620 *ctx, int ret)
-{
-	if (ret < 0)
-		return;
-
-	sii8620_set_upstream_edid(ctx);
-	sii8620_enable_hpd(ctx);
-}
-
 static void sii8620_mr_devcap(struct sii8620 *ctx)
 {
 	u8 dcap[MHL_DCAP_SIZE];
@@ -1490,6 +1480,15 @@ static void sii8620_set_mode(struct sii8620 *ctx, enum sii8620_mode mode)
 	);
 }
 
+static void sii8620_hpd_unplugged(struct sii8620 *ctx)
+{
+	sii8620_disable_hpd(ctx);
+	ctx->sink_type = SINK_NONE;
+	ctx->feature_complete = false;
+	kfree(ctx->edid);
+	ctx->edid = NULL;
+}
+
 static void sii8620_disconnect(struct sii8620 *ctx)
 {
 	sii8620_disable_gen2_write_burst(ctx);
@@ -1517,7 +1516,7 @@ static void sii8620_disconnect(struct sii8620 *ctx)
 		REG_MHL_DP_CTL6, 0x2A,
 		REG_MHL_DP_CTL7, 0x03
 	);
-	sii8620_disable_hpd(ctx);
+	sii8620_hpd_unplugged(ctx);
 	sii8620_write_seq_static(ctx,
 		REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE,
 		REG_MHL_COC_CTL1, 0x07,
@@ -1566,9 +1565,6 @@ static void sii8620_disconnect(struct sii8620 *ctx)
 	memset(ctx->devcap, 0, sizeof(ctx->devcap));
 	memset(ctx->xdevcap, 0, sizeof(ctx->xdevcap));
 	ctx->cbus_status = 0;
-	ctx->sink_type = SINK_NONE;
-	kfree(ctx->edid);
-	ctx->edid = NULL;
 	sii8620_mt_cleanup(ctx);
 }
 
@@ -1661,7 +1657,6 @@ static void sii8620_status_changed_path(struct sii8620 *ctx)
 				      | MHL_DST_LM_PATH_ENABLED);
 		if (!sii8620_is_mhl3(ctx))
 			sii8620_mt_read_devcap(ctx, false);
-		sii8620_mt_set_cont(ctx, sii8620_sink_detected);
 	} else {
 		sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE),
 				      MHL_DST_LM_CLK_MODE_NORMAL);
@@ -1764,8 +1759,11 @@ static void sii8620_msc_mr_set_int(struct sii8620 *ctx)
 	}
 	if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_FEAT_REQ)
 		sii8620_send_features(ctx);
-	if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_FEAT_COMPLETE)
-		sii8620_edid_read(ctx, 0);
+	if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_FEAT_COMPLETE) {
+		ctx->feature_complete = true;
+		if (ctx->edid)
+			sii8620_enable_hpd(ctx);
+	}
 }
 
 static struct sii8620_mt_msg *sii8620_msc_msg_first(struct sii8620 *ctx)
@@ -1840,6 +1838,13 @@ static void sii8620_irq_msc(struct sii8620 *ctx)
 	if (stat & BIT_CBUS_MSC_MR_WRITE_STAT)
 		sii8620_msc_mr_write_stat(ctx);
 
+	if (stat & BIT_CBUS_HPD_CHG) {
+		if (ctx->cbus_status & BIT_CBUS_STATUS_CBUS_HPD)
+			sii8620_hpd_plugged(ctx);
+		else
+			sii8620_hpd_unplugged(ctx);
+	}
+
 	if (stat & BIT_CBUS_MSC_MR_SET_INT)
 		sii8620_msc_mr_set_int(ctx);
 
@@ -1951,11 +1956,11 @@ static void sii8620_irq_ddc(struct sii8620 *ctx)
 
 	if (stat & BIT_DDC_CMD_DONE) {
 		sii8620_write(ctx, REG_INTR3_MASK, 0);
-		if (sii8620_is_mhl3(ctx))
+		if (sii8620_is_mhl3(ctx) && !ctx->feature_complete)
 			sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE),
 					   MHL_INT_RC_FEAT_REQ);
 		else
-			sii8620_edid_read(ctx, 0);
+			sii8620_enable_hpd(ctx);
 	}
 	sii8620_write(ctx, REG_INTR3, stat);
 }
-- 
2.7.4