From: Anson Huang <Anson.Huang@nxp.com>
To: shawnguo@kernel.org, kernel@pengutronix.de,
fabio.estevam@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com,
mturquette@baylibre.com, sboyd@kernel.org,
michael@amarulasolutions.com, matteo.lisi@engicam.com
Cc: Linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org
Subject: [PATCH V2 1/2] clk: imx6ul: add GPIO clock gates
Date: Sun, 3 Jun 2018 09:44:04 +0800 [thread overview]
Message-ID: <1527990245-13619-1-git-send-email-Anson.Huang@nxp.com> (raw)
i.MX6UL has GPIO clock gates in CCM CCGR,
add them into clock tree for clock management.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
changes since V1:
Move IMX6UL_CLK_GPIOx definition to end of clock table;
Based on Fabio's patch "[v2] dt-bindings: clock: imx6ul: Do not change the clock definition order".
drivers/clk/imx/clk-imx6ul.c | 5 +++++
include/dt-bindings/clock/imx6ul-clock.h | 8 +++++++-
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index ba563ba..3ea2d97 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -360,6 +360,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28);
if (clk_on_imx6ull())
clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x80, 18);
+ clks[IMX6UL_CLK_GPIO2] = imx_clk_gate2("gpio2", "ipg", base + 0x68, 30);
/* CCGR1 */
clks[IMX6UL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0);
@@ -376,6 +377,8 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_GPT1_SERIAL] = imx_clk_gate2("gpt1_serial", "perclk", base + 0x6c, 22);
clks[IMX6UL_CLK_UART4_IPG] = imx_clk_gate2("uart4_ipg", "ipg", base + 0x6c, 24);
clks[IMX6UL_CLK_UART4_SERIAL] = imx_clk_gate2("uart4_serial", "uart_podf", base + 0x6c, 24);
+ clks[IMX6UL_CLK_GPIO1] = imx_clk_gate2("gpio1", "ipg", base + 0x6c, 26);
+ clks[IMX6UL_CLK_GPIO5] = imx_clk_gate2("gpio5", "ipg", base + 0x6c, 30);
/* CCGR2 */
if (clk_on_imx6ull()) {
@@ -389,6 +392,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10);
clks[IMX6UL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12);
clks[IMX6UL_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif_podf", base + 0x70, 14);
+ clks[IMX6UL_CLK_GPIO3] = imx_clk_gate2("gpio3", "ipg", base + 0x70, 26);
clks[IMX6UL_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "axi", base + 0x70, 28);
clks[IMX6UL_CLK_PXP] = imx_clk_gate2("pxp", "axi", base + 0x70, 30);
@@ -405,6 +409,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
clks[IMX6UL_CLK_UART6_IPG] = imx_clk_gate2("uart6_ipg", "ipg", base + 0x74, 6);
clks[IMX6UL_CLK_UART6_SERIAL] = imx_clk_gate2("uart6_serial", "uart_podf", base + 0x74, 6);
clks[IMX6UL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_podf", base + 0x74, 10);
+ clks[IMX6UL_CLK_GPIO4] = imx_clk_gate2("gpio4", "ipg", base + 0x74, 12);
clks[IMX6UL_CLK_QSPI] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14);
clks[IMX6UL_CLK_WDOG1] = imx_clk_gate2("wdog1", "ipg", base + 0x74, 16);
clks[IMX6UL_CLK_MMDC_P0_FAST] = imx_clk_gate("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20);
diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h
index 0aa1d9c..f8e0476 100644
--- a/include/dt-bindings/clock/imx6ul-clock.h
+++ b/include/dt-bindings/clock/imx6ul-clock.h
@@ -254,6 +254,12 @@
#define IMX6UL_CLK_CKO2_PODF 241
#define IMX6UL_CLK_CKO2 242
#define IMX6UL_CLK_CKO 243
-#define IMX6UL_CLK_END 244
+#define IMX6UL_CLK_GPIO1 244
+#define IMX6UL_CLK_GPIO2 245
+#define IMX6UL_CLK_GPIO3 246
+#define IMX6UL_CLK_GPIO4 247
+#define IMX6UL_CLK_GPIO5 248
+
+#define IMX6UL_CLK_END 249
#endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */
--
2.7.4
next reply other threads:[~2018-06-03 1:47 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-03 1:44 Anson Huang [this message]
2018-06-03 1:44 ` [PATCH V2 2/2] ARM: dts: imx6ul: add GPIO clocks Anson Huang
2018-06-03 2:06 ` Fabio Estevam
2018-06-03 20:57 ` Fabio Estevam
2018-06-25 3:14 ` Anson Huang
2018-06-28 0:52 ` Shawn Guo
2018-06-29 18:39 ` Stephen Boyd
2018-07-01 2:19 ` Shawn Guo
2018-07-06 17:15 ` Stephen Boyd
2018-07-11 8:28 ` Shawn Guo
2018-06-03 2:06 ` [PATCH V2 1/2] clk: imx6ul: add GPIO clock gates Fabio Estevam
2018-06-05 21:10 ` Rob Herring
2018-06-29 18:42 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1527990245-13619-1-git-send-email-Anson.Huang@nxp.com \
--to=anson.huang@nxp.com \
--cc=Linux-imx@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matteo.lisi@engicam.com \
--cc=michael@amarulasolutions.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).