* [PATCH net] dt-bindings: net: add support for Microchip KSZ9131 Ethernet PHY
@ 2018-09-26 18:16 Yuiko Oshino
2018-09-26 18:33 ` Florian Fainelli
0 siblings, 1 reply; 2+ messages in thread
From: Yuiko Oshino @ 2018-09-26 18:16 UTC (permalink / raw)
To: davem, robh+dt, devicetree
Cc: linux-kernel, mark.rutland, m.felsch, Markus.Niebel, andrew,
netdev, UNGLinuxDriver
Add support for Microchip Technology KSZ9131 10/100/1000 Ethernet phy
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
---
.../devicetree/bindings/net/micrel-ksz90x1.txt | 29 +++++++++++++++++++++-
1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
index e22d8cf..d23d14a 100644
--- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
+++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
@@ -1,4 +1,4 @@
-Micrel KSZ9021/KSZ9031 Gigabit Ethernet PHY
+Micrel/Microchip KSZ9021/KSZ9031/KSZ9131 Gigabit Ethernet PHY
Some boards require special tuning values, particularly when it comes
to clock delays. You can specify clock delay values in the PHY OF
@@ -64,6 +64,33 @@ KSZ9031:
Attention: The link partner must be configurable as slave otherwise
no link will be established.
+KSZ9131:
+
+ All skew control options are specified in picoseconds. The minimum
+ value is 0, and the maximum is property-dependent. The increment
+ step is 100ps. The default value is the neutral setting, so setting
+ rxc-skew-ps=<0> actually results in -700 picoseconds adjustment.
+
+ Optional properties:
+
+ Maximum value of 2400, default value 700:
+
+ - rxc-skew-ps : Skew control of RX clock pad
+ - txc-skew-ps : Skew control of TX clock pad
+
+ Maximum value of 1500, default value 700:
+
+ - rxdv-skew-ps : Skew control of RX CTL pad
+ - txen-skew-ps : Skew control of TX CTL pad
+ - rxd0-skew-ps : Skew control of RX data 0 pad
+ - rxd1-skew-ps : Skew control of RX data 1 pad
+ - rxd2-skew-ps : Skew control of RX data 2 pad
+ - rxd3-skew-ps : Skew control of RX data 3 pad
+ - txd0-skew-ps : Skew control of TX data 0 pad
+ - txd1-skew-ps : Skew control of TX data 1 pad
+ - txd2-skew-ps : Skew control of TX data 2 pad
+ - txd3-skew-ps : Skew control of TX data 3 pad
+
Examples:
mdio {
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH net] dt-bindings: net: add support for Microchip KSZ9131 Ethernet PHY
2018-09-26 18:16 [PATCH net] dt-bindings: net: add support for Microchip KSZ9131 Ethernet PHY Yuiko Oshino
@ 2018-09-26 18:33 ` Florian Fainelli
0 siblings, 0 replies; 2+ messages in thread
From: Florian Fainelli @ 2018-09-26 18:33 UTC (permalink / raw)
To: Yuiko Oshino, davem, robh+dt, devicetree
Cc: linux-kernel, mark.rutland, m.felsch, Markus.Niebel, andrew,
netdev, UNGLinuxDriver
On 09/26/2018 11:16 AM, Yuiko Oshino wrote:
> Add support for Microchip Technology KSZ9131 10/100/1000 Ethernet phy
Capitalize PHY here.
Targeting the "net" tree which is for bugfixes is not appropriate here
since this is adding support for a new PHY model.
The binding looks reasonable though:
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
>
> Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
> ---
> .../devicetree/bindings/net/micrel-ksz90x1.txt | 29 +++++++++++++++++++++-
> 1 file changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
> index e22d8cf..d23d14a 100644
> --- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
> +++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
> @@ -1,4 +1,4 @@
> -Micrel KSZ9021/KSZ9031 Gigabit Ethernet PHY
> +Micrel/Microchip KSZ9021/KSZ9031/KSZ9131 Gigabit Ethernet PHY
>
> Some boards require special tuning values, particularly when it comes
> to clock delays. You can specify clock delay values in the PHY OF
> @@ -64,6 +64,33 @@ KSZ9031:
> Attention: The link partner must be configurable as slave otherwise
> no link will be established.
>
> +KSZ9131:
> +
> + All skew control options are specified in picoseconds. The minimum
> + value is 0, and the maximum is property-dependent. The increment
> + step is 100ps. The default value is the neutral setting, so setting
> + rxc-skew-ps=<0> actually results in -700 picoseconds adjustment.
> +
> + Optional properties:
> +
> + Maximum value of 2400, default value 700:
> +
> + - rxc-skew-ps : Skew control of RX clock pad
> + - txc-skew-ps : Skew control of TX clock pad
> +
> + Maximum value of 1500, default value 700:
> +
> + - rxdv-skew-ps : Skew control of RX CTL pad
> + - txen-skew-ps : Skew control of TX CTL pad
> + - rxd0-skew-ps : Skew control of RX data 0 pad
> + - rxd1-skew-ps : Skew control of RX data 1 pad
> + - rxd2-skew-ps : Skew control of RX data 2 pad
> + - rxd3-skew-ps : Skew control of RX data 3 pad
> + - txd0-skew-ps : Skew control of TX data 0 pad
> + - txd1-skew-ps : Skew control of TX data 1 pad
> + - txd2-skew-ps : Skew control of TX data 2 pad
> + - txd3-skew-ps : Skew control of TX data 3 pad
> +
> Examples:
>
> mdio {
>
--
Florian
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-09-26 18:34 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-26 18:16 [PATCH net] dt-bindings: net: add support for Microchip KSZ9131 Ethernet PHY Yuiko Oshino
2018-09-26 18:33 ` Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).