* [PATCH v2] clk: qcom: smd: Add support for MSM8998 rpm clocks
@ 2018-12-06 22:11 Jeffrey Hugo
2018-12-07 10:30 ` Marc Gonzalez
2018-12-07 14:23 ` Marc Gonzalez
0 siblings, 2 replies; 7+ messages in thread
From: Jeffrey Hugo @ 2018-12-06 22:11 UTC (permalink / raw)
To: mturquette, sboyd, robh+dt, mark.rutland
Cc: bjorn.andersson, marc.w.gonzalez, linux-clk, devicetree,
linux-arm-msm, linux-kernel, Jeffrey Hugo
Add rpm smd clocks, PMIC and bus clocks which are required on MSM8998
for clients to vote on.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
---
v2
-fix compatible ordering nits per Stephen
.../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
drivers/clk/qcom/clk-smd-rpm.c | 62 ++++++++++++++++++++++
include/dt-bindings/clock/qcom,rpmcc.h | 6 +++
3 files changed, 69 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
index 87b4949..944719b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -16,6 +16,7 @@ Required properties :
"qcom,rpmcc-msm8974", "qcom,rpmcc"
"qcom,rpmcc-apq8064", "qcom,rpmcc"
"qcom,rpmcc-msm8996", "qcom,rpmcc"
+ "qcom,rpmcc-msm8998", "qcom,rpmcc"
"qcom,rpmcc-qcs404", "qcom,rpmcc"
- #clock-cells : shall contain 1
diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index d3aadae..b1f95a9 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -655,10 +655,72 @@ static int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm)
.num_clks = ARRAY_SIZE(qcs404_clks),
};
+/* msm8998 */
+DEFINE_CLK_SMD_RPM(msm8998, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
+DEFINE_CLK_SMD_RPM(msm8998, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2);
+DEFINE_CLK_SMD_RPM(msm8998, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, div_clk1, div_clk1_a, 0xb);
+DEFINE_CLK_SMD_RPM(msm8998, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk1, bb_clk1_a, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk2, bb_clk2_a, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, bb_clk3_pin, bb_clk3_a_pin, 3);
+DEFINE_CLK_SMD_RPM(msm8998, mmssnoc_axi_rpm_clk, mmssnoc_axi_rpm_a_clk,
+ QCOM_SMD_RPM_MMAXI_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8998, aggre1_noc_clk, aggre1_noc_a_clk,
+ QCOM_SMD_RPM_AGGR_CLK, 1);
+DEFINE_CLK_SMD_RPM(msm8998, aggre2_noc_clk, aggre2_noc_a_clk,
+ QCOM_SMD_RPM_AGGR_CLK, 2);
+DEFINE_CLK_SMD_RPM_QDSS(msm8998, qdss_clk, qdss_a_clk,
+ QCOM_SMD_RPM_MISC_CLK, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk1, rf_clk1_a, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk2_pin, rf_clk2_a_pin, 5);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk3, rf_clk3_a, 6);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk3_pin, rf_clk3_a_pin, 6);
+static struct clk_smd_rpm *msm8998_clks[] = {
+ [RPM_SMD_SNOC_CLK] = &msm8998_snoc_clk,
+ [RPM_SMD_SNOC_A_CLK] = &msm8998_snoc_a_clk,
+ [RPM_SMD_CNOC_CLK] = &msm8998_cnoc_clk,
+ [RPM_SMD_CNOC_A_CLK] = &msm8998_cnoc_a_clk,
+ [RPM_SMD_CE1_CLK] = &msm8998_ce1_clk,
+ [RPM_SMD_CE1_A_CLK] = &msm8998_ce1_a_clk,
+ [RPM_SMD_DIV_CLK1] = &msm8998_div_clk1,
+ [RPM_SMD_DIV_A_CLK1] = &msm8998_div_clk1_a,
+ [RPM_SMD_IPA_CLK] = &msm8998_ipa_clk,
+ [RPM_SMD_IPA_A_CLK] = &msm8998_ipa_a_clk,
+ [RPM_SMD_BB_CLK1] = &msm8998_bb_clk1,
+ [RPM_SMD_BB_CLK1_A] = &msm8998_bb_clk1_a,
+ [RPM_SMD_BB_CLK2] = &msm8998_bb_clk2,
+ [RPM_SMD_BB_CLK2_A] = &msm8998_bb_clk2_a,
+ [RPM_SMD_BB_CLK3_PIN] = &msm8998_bb_clk3_pin,
+ [RPM_SMD_BB_CLK3_A_PIN] = &msm8998_bb_clk3_a_pin,
+ [RPM_SMD_MMAXI_CLK] = &msm8998_mmssnoc_axi_rpm_clk,
+ [RPM_SMD_MMAXI_A_CLK] = &msm8998_mmssnoc_axi_rpm_a_clk,
+ [RPM_SMD_AGGR1_NOC_CLK] = &msm8998_aggre1_noc_clk,
+ [RPM_SMD_AGGR1_NOC_A_CLK] = &msm8998_aggre1_noc_a_clk,
+ [RPM_SMD_AGGR2_NOC_CLK] = &msm8998_aggre2_noc_clk,
+ [RPM_SMD_AGGR2_NOC_A_CLK] = &msm8998_aggre2_noc_a_clk,
+ [RPM_SMD_QDSS_CLK] = &msm8998_qdss_clk,
+ [RPM_SMD_QDSS_A_CLK] = &msm8998_qdss_a_clk,
+ [RPM_SMD_RF_CLK1] = &msm8998_rf_clk1,
+ [RPM_SMD_RF_CLK1_A] = &msm8998_rf_clk1_a,
+ [RPM_SMD_RF_CLK2_PIN] = &msm8998_rf_clk2_pin,
+ [RPM_SMD_RF_CLK2_A_PIN] = &msm8998_rf_clk2_a_pin,
+ [RPM_SMD_RF_CLK3] = &msm8998_rf_clk3,
+ [RPM_SMD_RF_CLK3_A] = &msm8998_rf_clk3_a,
+ [RPM_SMD_RF_CLK3_PIN] = &msm8998_rf_clk3_pin,
+ [RPM_SMD_RF_CLK3_A_PIN] = &msm8998_rf_clk3_a_pin,
+};
+
+static const struct rpm_smd_clk_desc rpm_clk_msm8998 = {
+ .clks = msm8998_clks,
+ .num_clks = ARRAY_SIZE(msm8998_clks),
+};
+
static const struct of_device_id rpm_smd_clk_match_table[] = {
{ .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
{ .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 },
{ .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 },
+ { .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 },
{ .compatible = "qcom,rpmcc-qcs404", .data = &rpm_clk_qcs404 },
{ }
};
diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h
index 3658b0c..81dbd1f 100644
--- a/include/dt-bindings/clock/qcom,rpmcc.h
+++ b/include/dt-bindings/clock/qcom,rpmcc.h
@@ -127,5 +127,11 @@
#define RPM_SMD_BIMC_GPU_A_CLK 77
#define RPM_SMD_QPIC_CLK 78
#define RPM_SMD_QPIC_CLK_A 79
+#define RPM_SMD_BB_CLK3_PIN 80
+#define RPM_SMD_BB_CLK3_A_PIN 81
+#define RPM_SMD_RF_CLK3 82
+#define RPM_SMD_RF_CLK3_A 83
+#define RPM_SMD_RF_CLK3_PIN 84
+#define RPM_SMD_RF_CLK3_A_PIN 85
#endif
--
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2] clk: qcom: smd: Add support for MSM8998 rpm clocks
2018-12-06 22:11 [PATCH v2] clk: qcom: smd: Add support for MSM8998 rpm clocks Jeffrey Hugo
@ 2018-12-07 10:30 ` Marc Gonzalez
2018-12-07 15:10 ` Jeffrey Hugo
2018-12-07 14:23 ` Marc Gonzalez
1 sibling, 1 reply; 7+ messages in thread
From: Marc Gonzalez @ 2018-12-07 10:30 UTC (permalink / raw)
To: Jeffrey Hugo, Michael Turquette, Stephen Boyd
Cc: Rob Herring, Mark Rutland, Bjorn Andersson, linux-clk, MSM, LKML
On 06/12/2018 23:11, Jeffrey Hugo wrote:
> Add rpm smd clocks, PMIC and bus clocks which are required on MSM8998
> for clients to vote on.
>
> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
> ---
> v2
> -fix compatible ordering nits per Stephen
>
> .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
> drivers/clk/qcom/clk-smd-rpm.c | 62 ++++++++++++++++++++++
> include/dt-bindings/clock/qcom,rpmcc.h | 6 +++
> 3 files changed, 69 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
> index 87b4949..944719b 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
> +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
> @@ -16,6 +16,7 @@ Required properties :
> "qcom,rpmcc-msm8974", "qcom,rpmcc"
> "qcom,rpmcc-apq8064", "qcom,rpmcc"
> "qcom,rpmcc-msm8996", "qcom,rpmcc"
> + "qcom,rpmcc-msm8998", "qcom,rpmcc"
> "qcom,rpmcc-qcs404", "qcom,rpmcc"
>
> - #clock-cells : shall contain 1
> diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
> index d3aadae..b1f95a9 100644
> --- a/drivers/clk/qcom/clk-smd-rpm.c
> +++ b/drivers/clk/qcom/clk-smd-rpm.c
> @@ -655,10 +655,72 @@ static int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm)
> .num_clks = ARRAY_SIZE(qcs404_clks),
> };
>
> +/* msm8998 */
> +DEFINE_CLK_SMD_RPM(msm8998, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
> +DEFINE_CLK_SMD_RPM(msm8998, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2);
> +DEFINE_CLK_SMD_RPM(msm8998, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0);
> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, div_clk1, div_clk1_a, 0xb);
> +DEFINE_CLK_SMD_RPM(msm8998, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0);
> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk1, bb_clk1_a, 1);
> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk2, bb_clk2_a, 2);
> +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, bb_clk3_pin, bb_clk3_a_pin, 3);
> +DEFINE_CLK_SMD_RPM(msm8998, mmssnoc_axi_rpm_clk, mmssnoc_axi_rpm_a_clk,
> + QCOM_SMD_RPM_MMAXI_CLK, 0);
> +DEFINE_CLK_SMD_RPM(msm8998, aggre1_noc_clk, aggre1_noc_a_clk,
> + QCOM_SMD_RPM_AGGR_CLK, 1);
> +DEFINE_CLK_SMD_RPM(msm8998, aggre2_noc_clk, aggre2_noc_a_clk,
> + QCOM_SMD_RPM_AGGR_CLK, 2);
> +DEFINE_CLK_SMD_RPM_QDSS(msm8998, qdss_clk, qdss_a_clk,
> + QCOM_SMD_RPM_MISC_CLK, 1);
> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk1, rf_clk1_a, 4);
> +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk2_pin, rf_clk2_a_pin, 5);
> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk3, rf_clk3_a, 6);
> +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk3_pin, rf_clk3_a_pin, 6);
> +static struct clk_smd_rpm *msm8998_clks[] = {
> + [RPM_SMD_SNOC_CLK] = &msm8998_snoc_clk,
> + [RPM_SMD_SNOC_A_CLK] = &msm8998_snoc_a_clk,
> + [RPM_SMD_CNOC_CLK] = &msm8998_cnoc_clk,
> + [RPM_SMD_CNOC_A_CLK] = &msm8998_cnoc_a_clk,
> + [RPM_SMD_CE1_CLK] = &msm8998_ce1_clk,
> + [RPM_SMD_CE1_A_CLK] = &msm8998_ce1_a_clk,
> + [RPM_SMD_DIV_CLK1] = &msm8998_div_clk1,
> + [RPM_SMD_DIV_A_CLK1] = &msm8998_div_clk1_a,
> + [RPM_SMD_IPA_CLK] = &msm8998_ipa_clk,
> + [RPM_SMD_IPA_A_CLK] = &msm8998_ipa_a_clk,
> + [RPM_SMD_BB_CLK1] = &msm8998_bb_clk1,
> + [RPM_SMD_BB_CLK1_A] = &msm8998_bb_clk1_a,
> + [RPM_SMD_BB_CLK2] = &msm8998_bb_clk2,
> + [RPM_SMD_BB_CLK2_A] = &msm8998_bb_clk2_a,
> + [RPM_SMD_BB_CLK3_PIN] = &msm8998_bb_clk3_pin,
> + [RPM_SMD_BB_CLK3_A_PIN] = &msm8998_bb_clk3_a_pin,
> + [RPM_SMD_MMAXI_CLK] = &msm8998_mmssnoc_axi_rpm_clk,
> + [RPM_SMD_MMAXI_A_CLK] = &msm8998_mmssnoc_axi_rpm_a_clk,
> + [RPM_SMD_AGGR1_NOC_CLK] = &msm8998_aggre1_noc_clk,
> + [RPM_SMD_AGGR1_NOC_A_CLK] = &msm8998_aggre1_noc_a_clk,
> + [RPM_SMD_AGGR2_NOC_CLK] = &msm8998_aggre2_noc_clk,
> + [RPM_SMD_AGGR2_NOC_A_CLK] = &msm8998_aggre2_noc_a_clk,
> + [RPM_SMD_QDSS_CLK] = &msm8998_qdss_clk,
> + [RPM_SMD_QDSS_A_CLK] = &msm8998_qdss_a_clk,
> + [RPM_SMD_RF_CLK1] = &msm8998_rf_clk1,
> + [RPM_SMD_RF_CLK1_A] = &msm8998_rf_clk1_a,
> + [RPM_SMD_RF_CLK2_PIN] = &msm8998_rf_clk2_pin,
> + [RPM_SMD_RF_CLK2_A_PIN] = &msm8998_rf_clk2_a_pin,
> + [RPM_SMD_RF_CLK3] = &msm8998_rf_clk3,
> + [RPM_SMD_RF_CLK3_A] = &msm8998_rf_clk3_a,
> + [RPM_SMD_RF_CLK3_PIN] = &msm8998_rf_clk3_pin,
> + [RPM_SMD_RF_CLK3_A_PIN] = &msm8998_rf_clk3_a_pin,
> +};
> +
> +static const struct rpm_smd_clk_desc rpm_clk_msm8998 = {
> + .clks = msm8998_clks,
> + .num_clks = ARRAY_SIZE(msm8998_clks),
> +};
> +
> static const struct of_device_id rpm_smd_clk_match_table[] = {
> { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
> { .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 },
> { .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 },
> + { .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 },
> { .compatible = "qcom,rpmcc-qcs404", .data = &rpm_clk_qcs404 },
> { }
> };
> diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h
> index 3658b0c..81dbd1f 100644
> --- a/include/dt-bindings/clock/qcom,rpmcc.h
> +++ b/include/dt-bindings/clock/qcom,rpmcc.h
> @@ -127,5 +127,11 @@
> #define RPM_SMD_BIMC_GPU_A_CLK 77
> #define RPM_SMD_QPIC_CLK 78
> #define RPM_SMD_QPIC_CLK_A 79
> +#define RPM_SMD_BB_CLK3_PIN 80
> +#define RPM_SMD_BB_CLK3_A_PIN 81
> +#define RPM_SMD_RF_CLK3 82
> +#define RPM_SMD_RF_CLK3_A 83
> +#define RPM_SMD_RF_CLK3_PIN 84
> +#define RPM_SMD_RF_CLK3_A_PIN 85
>
> #endif
>
What's the difference between RPM_SMD_LN_BB_CLK and RPM_SMD_BB_CLK1?
$ git grep RPM_SMD_LN_BB_CLK
arch/arm64/boot/dts/qcom/msm8996.dtsi: clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
arch/arm64/boot/dts/qcom/msm8996.dtsi: <&rpmcc RPM_SMD_LN_BB_CLK>,
drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_LN_BB_CLK] = &msm8996_ln_bb_clk,
drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_LN_BB_CLK] = &qcs404_ln_bb_clk,
include/dt-bindings/clock/qcom,rpmcc.h:#define RPM_SMD_LN_BB_CLK 74
$ git grep 'RPM_SMD_BB_CLK1\>'
Documentation/devicetree/bindings/sound/qcom,wcd9335.txt: <&rpmcc RPM_SMD_BB_CLK1>;
drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_BB_CLK1] = &msm8916_bb_clk1,
drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_BB_CLK1] = &msm8996_bb_clk1,
drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_BB_CLK1] = &msm8998_bb_clk1,
include/dt-bindings/clock/qcom,rpmcc.h:#define RPM_SMD_BB_CLK1 10
Because the downstream kernel defines:
DEFINE_CLK_RPM_SMD_XO_BUFFER(ln_bb_clk1, ln_bb_clk1_ao, LN_BB_CLK1_ID);
DEFINE_CLK_RPM_SMD_XO_BUFFER_PINCTRL(ln_bb_clk1_pin, ln_bb_clk1_pin_ao,
LN_BB_CLK1_PIN_ID);
DEFINE_CLK_RPM_SMD_XO_BUFFER(ln_bb_clk2, ln_bb_clk2_ao, LN_BB_CLK2_ID);
DEFINE_CLK_RPM_SMD_XO_BUFFER_PINCTRL(ln_bb_clk2_pin, ln_bb_clk2_pin_ao,
LN_BB_CLK2_PIN_ID);
DEFINE_CLK_RPM_SMD_XO_BUFFER(ln_bb_clk3, ln_bb_clk3_ao, LN_BB_CLK3_ID);
DEFINE_CLK_RPM_SMD_XO_BUFFER_PINCTRL(ln_bb_clk3_pin, ln_bb_clk3_pin_ao,
LN_BB_CLK3_PIN_ID);
CLK_LIST(ln_bb_clk1),
CLK_LIST(ln_bb_clk1_ao),
CLK_LIST(ln_bb_clk1_pin),
CLK_LIST(ln_bb_clk1_pin_ao),
CLK_LIST(ln_bb_clk2),
CLK_LIST(ln_bb_clk2_ao),
CLK_LIST(ln_bb_clk2_pin),
CLK_LIST(ln_bb_clk2_pin_ao),
CLK_LIST(ln_bb_clk3),
CLK_LIST(ln_bb_clk3_ao),
CLK_LIST(ln_bb_clk3_pin),
CLK_LIST(ln_bb_clk3_pin_ao),
While your patch defines
DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk1, bb_clk1_a, 1);
DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk2, bb_clk2_a, 2);
DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, bb_clk3_pin, bb_clk3_a_pin, 3);
[RPM_SMD_BB_CLK1] = &msm8998_bb_clk1,
[RPM_SMD_BB_CLK1_A] = &msm8998_bb_clk1_a,
[RPM_SMD_BB_CLK2] = &msm8998_bb_clk2,
[RPM_SMD_BB_CLK2_A] = &msm8998_bb_clk2_a,
[RPM_SMD_BB_CLK3_PIN] = &msm8998_bb_clk3_pin,
[RPM_SMD_BB_CLK3_A_PIN] = &msm8998_bb_clk3_a_pin,
Regards.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] clk: qcom: smd: Add support for MSM8998 rpm clocks
2018-12-06 22:11 [PATCH v2] clk: qcom: smd: Add support for MSM8998 rpm clocks Jeffrey Hugo
2018-12-07 10:30 ` Marc Gonzalez
@ 2018-12-07 14:23 ` Marc Gonzalez
2018-12-07 15:13 ` Jeffrey Hugo
1 sibling, 1 reply; 7+ messages in thread
From: Marc Gonzalez @ 2018-12-07 14:23 UTC (permalink / raw)
To: Jeffrey Hugo, Michael Turquette, Stephen Boyd
Cc: Bjorn Andersson, linux-clk, MSM, LKML
On 06/12/2018 23:11, Jeffrey Hugo wrote:
> Add rpm smd clocks, PMIC and bus clocks which are required on MSM8998
> for clients to vote on.
>
> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
> ---
> v2
> -fix compatible ordering nits per Stephen
>
> .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
> drivers/clk/qcom/clk-smd-rpm.c | 62 ++++++++++++++++++++++
> include/dt-bindings/clock/qcom,rpmcc.h | 6 +++
> 3 files changed, 69 insertions(+)
Hmmm, my board seems to dislike this patch... it locks up for a while,
then reboots.
[ 6.957289] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11
[ 6.961233] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 2
[ 6.970782] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: query attribute, opcode 6, idn 1, failed with error -11 after 3 retires
[ 6.979576] ufshcd-qcom 1da4000.ufshc: ufshcd_complete_dev_init setting fDeviceInit flag failed with error -11
[ 23.432798] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 23.432884] rcu: 7-...0: (1 GPs behind) idle=6a2/1/0x4000000000000000 softirq=92/93 fqs=2626
[ 23.437927] rcu: (detected by 0, t=5252 jiffies, g=-819, q=112)
[ 23.446425] Task dump for CPU 7:
[ 23.452567] swapper/0 R running task 0 1 0 0x0000002a
[ 23.455806] Call trace:
[ 23.462872] __switch_to+0x94/0xe0
[ 23.465009] _regmap_write+0x58/0xb0
[ 23.468452] _regmap_update_bits+0xf0/0x110
[ 23.472186] regmap_update_bits_base+0x60/0x90
[ 23.476110] clk_disable_regmap+0x34/0x40
[ 23.480614] clk_branch_toggle+0x108/0x1b0
[ 23.484681] clk_branch2_disable+0x18/0x20
[ 23.488692] clk_disable_unused_subtree+0xc4/0xe0
[ 23.492761] clk_disable_unused+0x3c/0x130
[ 23.497535] do_one_initcall+0x5c/0x180
[ 23.501557] kernel_init_freeable+0x198/0x244
[ 23.505276] kernel_init+0x10/0x110
[ 23.509768] ret_from_fork+0x10/0x20
/*** REBOOT ***/
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
I need to check the ufs_reset pin and phy init seq before I can investigate
this issue, but I wanted to send a report ASAP.
Regards.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] clk: qcom: smd: Add support for MSM8998 rpm clocks
2018-12-07 10:30 ` Marc Gonzalez
@ 2018-12-07 15:10 ` Jeffrey Hugo
2018-12-07 16:08 ` Jeffrey Hugo
0 siblings, 1 reply; 7+ messages in thread
From: Jeffrey Hugo @ 2018-12-07 15:10 UTC (permalink / raw)
To: Marc Gonzalez, Michael Turquette, Stephen Boyd
Cc: Rob Herring, Mark Rutland, Bjorn Andersson, linux-clk, MSM, LKML
On 12/7/2018 3:30 AM, Marc Gonzalez wrote:
> On 06/12/2018 23:11, Jeffrey Hugo wrote:
>
>> Add rpm smd clocks, PMIC and bus clocks which are required on MSM8998
>> for clients to vote on.
>>
>> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
>> ---
>> v2
>> -fix compatible ordering nits per Stephen
>>
>> .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
>> drivers/clk/qcom/clk-smd-rpm.c | 62 ++++++++++++++++++++++
>> include/dt-bindings/clock/qcom,rpmcc.h | 6 +++
>> 3 files changed, 69 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
>> index 87b4949..944719b 100644
>> --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
>> +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
>> @@ -16,6 +16,7 @@ Required properties :
>> "qcom,rpmcc-msm8974", "qcom,rpmcc"
>> "qcom,rpmcc-apq8064", "qcom,rpmcc"
>> "qcom,rpmcc-msm8996", "qcom,rpmcc"
>> + "qcom,rpmcc-msm8998", "qcom,rpmcc"
>> "qcom,rpmcc-qcs404", "qcom,rpmcc"
>>
>> - #clock-cells : shall contain 1
>> diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
>> index d3aadae..b1f95a9 100644
>> --- a/drivers/clk/qcom/clk-smd-rpm.c
>> +++ b/drivers/clk/qcom/clk-smd-rpm.c
>> @@ -655,10 +655,72 @@ static int clk_smd_rpm_enable_scaling(struct qcom_smd_rpm *rpm)
>> .num_clks = ARRAY_SIZE(qcs404_clks),
>> };
>>
>> +/* msm8998 */
>> +DEFINE_CLK_SMD_RPM(msm8998, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
>> +DEFINE_CLK_SMD_RPM(msm8998, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2);
>> +DEFINE_CLK_SMD_RPM(msm8998, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0);
>> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, div_clk1, div_clk1_a, 0xb);
>> +DEFINE_CLK_SMD_RPM(msm8998, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0);
>> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk1, bb_clk1_a, 1);
>> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk2, bb_clk2_a, 2);
>> +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, bb_clk3_pin, bb_clk3_a_pin, 3);
>> +DEFINE_CLK_SMD_RPM(msm8998, mmssnoc_axi_rpm_clk, mmssnoc_axi_rpm_a_clk,
>> + QCOM_SMD_RPM_MMAXI_CLK, 0);
>> +DEFINE_CLK_SMD_RPM(msm8998, aggre1_noc_clk, aggre1_noc_a_clk,
>> + QCOM_SMD_RPM_AGGR_CLK, 1);
>> +DEFINE_CLK_SMD_RPM(msm8998, aggre2_noc_clk, aggre2_noc_a_clk,
>> + QCOM_SMD_RPM_AGGR_CLK, 2);
>> +DEFINE_CLK_SMD_RPM_QDSS(msm8998, qdss_clk, qdss_a_clk,
>> + QCOM_SMD_RPM_MISC_CLK, 1);
>> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk1, rf_clk1_a, 4);
>> +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk2_pin, rf_clk2_a_pin, 5);
>> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk3, rf_clk3_a, 6);
>> +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk3_pin, rf_clk3_a_pin, 6);
>> +static struct clk_smd_rpm *msm8998_clks[] = {
>> + [RPM_SMD_SNOC_CLK] = &msm8998_snoc_clk,
>> + [RPM_SMD_SNOC_A_CLK] = &msm8998_snoc_a_clk,
>> + [RPM_SMD_CNOC_CLK] = &msm8998_cnoc_clk,
>> + [RPM_SMD_CNOC_A_CLK] = &msm8998_cnoc_a_clk,
>> + [RPM_SMD_CE1_CLK] = &msm8998_ce1_clk,
>> + [RPM_SMD_CE1_A_CLK] = &msm8998_ce1_a_clk,
>> + [RPM_SMD_DIV_CLK1] = &msm8998_div_clk1,
>> + [RPM_SMD_DIV_A_CLK1] = &msm8998_div_clk1_a,
>> + [RPM_SMD_IPA_CLK] = &msm8998_ipa_clk,
>> + [RPM_SMD_IPA_A_CLK] = &msm8998_ipa_a_clk,
>> + [RPM_SMD_BB_CLK1] = &msm8998_bb_clk1,
>> + [RPM_SMD_BB_CLK1_A] = &msm8998_bb_clk1_a,
>> + [RPM_SMD_BB_CLK2] = &msm8998_bb_clk2,
>> + [RPM_SMD_BB_CLK2_A] = &msm8998_bb_clk2_a,
>> + [RPM_SMD_BB_CLK3_PIN] = &msm8998_bb_clk3_pin,
>> + [RPM_SMD_BB_CLK3_A_PIN] = &msm8998_bb_clk3_a_pin,
>> + [RPM_SMD_MMAXI_CLK] = &msm8998_mmssnoc_axi_rpm_clk,
>> + [RPM_SMD_MMAXI_A_CLK] = &msm8998_mmssnoc_axi_rpm_a_clk,
>> + [RPM_SMD_AGGR1_NOC_CLK] = &msm8998_aggre1_noc_clk,
>> + [RPM_SMD_AGGR1_NOC_A_CLK] = &msm8998_aggre1_noc_a_clk,
>> + [RPM_SMD_AGGR2_NOC_CLK] = &msm8998_aggre2_noc_clk,
>> + [RPM_SMD_AGGR2_NOC_A_CLK] = &msm8998_aggre2_noc_a_clk,
>> + [RPM_SMD_QDSS_CLK] = &msm8998_qdss_clk,
>> + [RPM_SMD_QDSS_A_CLK] = &msm8998_qdss_a_clk,
>> + [RPM_SMD_RF_CLK1] = &msm8998_rf_clk1,
>> + [RPM_SMD_RF_CLK1_A] = &msm8998_rf_clk1_a,
>> + [RPM_SMD_RF_CLK2_PIN] = &msm8998_rf_clk2_pin,
>> + [RPM_SMD_RF_CLK2_A_PIN] = &msm8998_rf_clk2_a_pin,
>> + [RPM_SMD_RF_CLK3] = &msm8998_rf_clk3,
>> + [RPM_SMD_RF_CLK3_A] = &msm8998_rf_clk3_a,
>> + [RPM_SMD_RF_CLK3_PIN] = &msm8998_rf_clk3_pin,
>> + [RPM_SMD_RF_CLK3_A_PIN] = &msm8998_rf_clk3_a_pin,
>> +};
>> +
>> +static const struct rpm_smd_clk_desc rpm_clk_msm8998 = {
>> + .clks = msm8998_clks,
>> + .num_clks = ARRAY_SIZE(msm8998_clks),
>> +};
>> +
>> static const struct of_device_id rpm_smd_clk_match_table[] = {
>> { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
>> { .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 },
>> { .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 },
>> + { .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 },
>> { .compatible = "qcom,rpmcc-qcs404", .data = &rpm_clk_qcs404 },
>> { }
>> };
>> diff --git a/include/dt-bindings/clock/qcom,rpmcc.h b/include/dt-bindings/clock/qcom,rpmcc.h
>> index 3658b0c..81dbd1f 100644
>> --- a/include/dt-bindings/clock/qcom,rpmcc.h
>> +++ b/include/dt-bindings/clock/qcom,rpmcc.h
>> @@ -127,5 +127,11 @@
>> #define RPM_SMD_BIMC_GPU_A_CLK 77
>> #define RPM_SMD_QPIC_CLK 78
>> #define RPM_SMD_QPIC_CLK_A 79
>> +#define RPM_SMD_BB_CLK3_PIN 80
>> +#define RPM_SMD_BB_CLK3_A_PIN 81
>> +#define RPM_SMD_RF_CLK3 82
>> +#define RPM_SMD_RF_CLK3_A 83
>> +#define RPM_SMD_RF_CLK3_PIN 84
>> +#define RPM_SMD_RF_CLK3_A_PIN 85
>>
>> #endif
>>
>
> What's the difference between RPM_SMD_LN_BB_CLK and RPM_SMD_BB_CLK1?
>
> $ git grep RPM_SMD_LN_BB_CLK
> arch/arm64/boot/dts/qcom/msm8996.dtsi: clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
> arch/arm64/boot/dts/qcom/msm8996.dtsi: <&rpmcc RPM_SMD_LN_BB_CLK>,
> drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_LN_BB_CLK] = &msm8996_ln_bb_clk,
> drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_LN_BB_CLK] = &qcs404_ln_bb_clk,
> include/dt-bindings/clock/qcom,rpmcc.h:#define RPM_SMD_LN_BB_CLK 74
>
>
> $ git grep 'RPM_SMD_BB_CLK1\>'
> Documentation/devicetree/bindings/sound/qcom,wcd9335.txt: <&rpmcc RPM_SMD_BB_CLK1>;
> drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_BB_CLK1] = &msm8916_bb_clk1,
> drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_BB_CLK1] = &msm8996_bb_clk1,
> drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_BB_CLK1] = &msm8998_bb_clk1,
> include/dt-bindings/clock/qcom,rpmcc.h:#define RPM_SMD_BB_CLK1 10
>
>
> Because the downstream kernel defines:
>
> DEFINE_CLK_RPM_SMD_XO_BUFFER(ln_bb_clk1, ln_bb_clk1_ao, LN_BB_CLK1_ID);
> DEFINE_CLK_RPM_SMD_XO_BUFFER_PINCTRL(ln_bb_clk1_pin, ln_bb_clk1_pin_ao,
> LN_BB_CLK1_PIN_ID);
> DEFINE_CLK_RPM_SMD_XO_BUFFER(ln_bb_clk2, ln_bb_clk2_ao, LN_BB_CLK2_ID);
> DEFINE_CLK_RPM_SMD_XO_BUFFER_PINCTRL(ln_bb_clk2_pin, ln_bb_clk2_pin_ao,
> LN_BB_CLK2_PIN_ID);
> DEFINE_CLK_RPM_SMD_XO_BUFFER(ln_bb_clk3, ln_bb_clk3_ao, LN_BB_CLK3_ID);
> DEFINE_CLK_RPM_SMD_XO_BUFFER_PINCTRL(ln_bb_clk3_pin, ln_bb_clk3_pin_ao,
> LN_BB_CLK3_PIN_ID);
>
> CLK_LIST(ln_bb_clk1),
> CLK_LIST(ln_bb_clk1_ao),
> CLK_LIST(ln_bb_clk1_pin),
> CLK_LIST(ln_bb_clk1_pin_ao),
> CLK_LIST(ln_bb_clk2),
> CLK_LIST(ln_bb_clk2_ao),
> CLK_LIST(ln_bb_clk2_pin),
> CLK_LIST(ln_bb_clk2_pin_ao),
> CLK_LIST(ln_bb_clk3),
> CLK_LIST(ln_bb_clk3_ao),
> CLK_LIST(ln_bb_clk3_pin),
> CLK_LIST(ln_bb_clk3_pin_ao),
>
>
> While your patch defines
>
> DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk1, bb_clk1_a, 1);
> DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk2, bb_clk2_a, 2);
> DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, bb_clk3_pin, bb_clk3_a_pin, 3);
>
> [RPM_SMD_BB_CLK1] = &msm8998_bb_clk1,
> [RPM_SMD_BB_CLK1_A] = &msm8998_bb_clk1_a,
> [RPM_SMD_BB_CLK2] = &msm8998_bb_clk2,
> [RPM_SMD_BB_CLK2_A] = &msm8998_bb_clk2_a,
> [RPM_SMD_BB_CLK3_PIN] = &msm8998_bb_clk3_pin,
> [RPM_SMD_BB_CLK3_A_PIN] = &msm8998_bb_clk3_a_pin,
>
Good question. I don't know.
The downstream ln_bb IDs correspond to the bb IDs used by upstream 8996,
where as the upstream 8996 ln_bb IDs are different. The IDs seem to be
the important thing, where as the "name" seems to be fairly irrelevant
to the actual handling of the clock.
I haven't yet found documentation other than the downstream code about
these clocks, so I chose to be consistent with 8996.
Also, as a side note, I limited the list of clocks I enumerated to those
which the downstream driver defined, and were used when grepping the
downstream DT.
--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] clk: qcom: smd: Add support for MSM8998 rpm clocks
2018-12-07 14:23 ` Marc Gonzalez
@ 2018-12-07 15:13 ` Jeffrey Hugo
2018-12-10 23:10 ` Jeffrey Hugo
0 siblings, 1 reply; 7+ messages in thread
From: Jeffrey Hugo @ 2018-12-07 15:13 UTC (permalink / raw)
To: Marc Gonzalez, Michael Turquette, Stephen Boyd
Cc: Bjorn Andersson, linux-clk, MSM, LKML
On 12/7/2018 7:23 AM, Marc Gonzalez wrote:
> On 06/12/2018 23:11, Jeffrey Hugo wrote:
>
>> Add rpm smd clocks, PMIC and bus clocks which are required on MSM8998
>> for clients to vote on.
>>
>> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
>> ---
>> v2
>> -fix compatible ordering nits per Stephen
>>
>> .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
>> drivers/clk/qcom/clk-smd-rpm.c | 62 ++++++++++++++++++++++
>> include/dt-bindings/clock/qcom,rpmcc.h | 6 +++
>> 3 files changed, 69 insertions(+)
>
> Hmmm, my board seems to dislike this patch... it locks up for a while,
> then reboots.
>
> [ 6.957289] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending flag query for idn 1 failed, err = -11
> [ 6.961233] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: failed with error -11, retries 2
> [ 6.970782] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry: query attribute, opcode 6, idn 1, failed with error -11 after 3 retires
> [ 6.979576] ufshcd-qcom 1da4000.ufshc: ufshcd_complete_dev_init setting fDeviceInit flag failed with error -11
> [ 23.432798] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
> [ 23.432884] rcu: 7-...0: (1 GPs behind) idle=6a2/1/0x4000000000000000 softirq=92/93 fqs=2626
> [ 23.437927] rcu: (detected by 0, t=5252 jiffies, g=-819, q=112)
> [ 23.446425] Task dump for CPU 7:
> [ 23.452567] swapper/0 R running task 0 1 0 0x0000002a
> [ 23.455806] Call trace:
> [ 23.462872] __switch_to+0x94/0xe0
> [ 23.465009] _regmap_write+0x58/0xb0
> [ 23.468452] _regmap_update_bits+0xf0/0x110
> [ 23.472186] regmap_update_bits_base+0x60/0x90
> [ 23.476110] clk_disable_regmap+0x34/0x40
> [ 23.480614] clk_branch_toggle+0x108/0x1b0
> [ 23.484681] clk_branch2_disable+0x18/0x20
> [ 23.488692] clk_disable_unused_subtree+0xc4/0xe0
> [ 23.492761] clk_disable_unused+0x3c/0x130
> [ 23.497535] do_one_initcall+0x5c/0x180
> [ 23.501557] kernel_init_freeable+0x198/0x244
> [ 23.505276] kernel_init+0x10/0x110
> [ 23.509768] ret_from_fork+0x10/0x20
>
> /*** REBOOT ***/
> Format: Log Type - Time(microsec) - Message - Optional Info
> Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
>
> I need to check the ufs_reset pin and phy init seq before I can investigate
> this issue, but I wanted to send a report ASAP.
>
Hmm. I run with clk_ignore_unused. I'm guessing that something was
defined that should be used eventually, but isn't used now, and so its
getting turned off when it probably shouldn't be.
I'll try to repro on my end.
--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] clk: qcom: smd: Add support for MSM8998 rpm clocks
2018-12-07 15:10 ` Jeffrey Hugo
@ 2018-12-07 16:08 ` Jeffrey Hugo
0 siblings, 0 replies; 7+ messages in thread
From: Jeffrey Hugo @ 2018-12-07 16:08 UTC (permalink / raw)
To: Marc Gonzalez, Michael Turquette, Stephen Boyd
Cc: Rob Herring, Mark Rutland, Bjorn Andersson, linux-clk, MSM, LKML
On 12/7/2018 8:10 AM, Jeffrey Hugo wrote:
> On 12/7/2018 3:30 AM, Marc Gonzalez wrote:
>> On 06/12/2018 23:11, Jeffrey Hugo wrote:
>>
>>> Add rpm smd clocks, PMIC and bus clocks which are required on MSM8998
>>> for clients to vote on.
>>>
>>> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
>>> ---
>>> v2
>>> -fix compatible ordering nits per Stephen
>>>
>>> .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
>>> drivers/clk/qcom/clk-smd-rpm.c | 62
>>> ++++++++++++++++++++++
>>> include/dt-bindings/clock/qcom,rpmcc.h | 6 +++
>>> 3 files changed, 69 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
>>> b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
>>> index 87b4949..944719b 100644
>>> --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
>>> +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
>>> @@ -16,6 +16,7 @@ Required properties :
>>> "qcom,rpmcc-msm8974", "qcom,rpmcc"
>>> "qcom,rpmcc-apq8064", "qcom,rpmcc"
>>> "qcom,rpmcc-msm8996", "qcom,rpmcc"
>>> + "qcom,rpmcc-msm8998", "qcom,rpmcc"
>>> "qcom,rpmcc-qcs404", "qcom,rpmcc"
>>> - #clock-cells : shall contain 1
>>> diff --git a/drivers/clk/qcom/clk-smd-rpm.c
>>> b/drivers/clk/qcom/clk-smd-rpm.c
>>> index d3aadae..b1f95a9 100644
>>> --- a/drivers/clk/qcom/clk-smd-rpm.c
>>> +++ b/drivers/clk/qcom/clk-smd-rpm.c
>>> @@ -655,10 +655,72 @@ static int clk_smd_rpm_enable_scaling(struct
>>> qcom_smd_rpm *rpm)
>>> .num_clks = ARRAY_SIZE(qcs404_clks),
>>> };
>>> +/* msm8998 */
>>> +DEFINE_CLK_SMD_RPM(msm8998, snoc_clk, snoc_a_clk,
>>> QCOM_SMD_RPM_BUS_CLK, 1);
>>> +DEFINE_CLK_SMD_RPM(msm8998, cnoc_clk, cnoc_a_clk,
>>> QCOM_SMD_RPM_BUS_CLK, 2);
>>> +DEFINE_CLK_SMD_RPM(msm8998, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK,
>>> 0);
>>> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, div_clk1, div_clk1_a, 0xb);
>>> +DEFINE_CLK_SMD_RPM(msm8998, ipa_clk, ipa_a_clk,
>>> QCOM_SMD_RPM_IPA_CLK, 0);
>>> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk1, bb_clk1_a, 1);
>>> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk2, bb_clk2_a, 2);
>>> +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, bb_clk3_pin,
>>> bb_clk3_a_pin, 3);
>>> +DEFINE_CLK_SMD_RPM(msm8998, mmssnoc_axi_rpm_clk, mmssnoc_axi_rpm_a_clk,
>>> + QCOM_SMD_RPM_MMAXI_CLK, 0);
>>> +DEFINE_CLK_SMD_RPM(msm8998, aggre1_noc_clk, aggre1_noc_a_clk,
>>> + QCOM_SMD_RPM_AGGR_CLK, 1);
>>> +DEFINE_CLK_SMD_RPM(msm8998, aggre2_noc_clk, aggre2_noc_a_clk,
>>> + QCOM_SMD_RPM_AGGR_CLK, 2);
>>> +DEFINE_CLK_SMD_RPM_QDSS(msm8998, qdss_clk, qdss_a_clk,
>>> + QCOM_SMD_RPM_MISC_CLK, 1);
>>> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk1, rf_clk1_a, 4);
>>> +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk2_pin,
>>> rf_clk2_a_pin, 5);
>>> +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, rf_clk3, rf_clk3_a, 6);
>>> +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, rf_clk3_pin,
>>> rf_clk3_a_pin, 6);
>>> +static struct clk_smd_rpm *msm8998_clks[] = {
>>> + [RPM_SMD_SNOC_CLK] = &msm8998_snoc_clk,
>>> + [RPM_SMD_SNOC_A_CLK] = &msm8998_snoc_a_clk,
>>> + [RPM_SMD_CNOC_CLK] = &msm8998_cnoc_clk,
>>> + [RPM_SMD_CNOC_A_CLK] = &msm8998_cnoc_a_clk,
>>> + [RPM_SMD_CE1_CLK] = &msm8998_ce1_clk,
>>> + [RPM_SMD_CE1_A_CLK] = &msm8998_ce1_a_clk,
>>> + [RPM_SMD_DIV_CLK1] = &msm8998_div_clk1,
>>> + [RPM_SMD_DIV_A_CLK1] = &msm8998_div_clk1_a,
>>> + [RPM_SMD_IPA_CLK] = &msm8998_ipa_clk,
>>> + [RPM_SMD_IPA_A_CLK] = &msm8998_ipa_a_clk,
>>> + [RPM_SMD_BB_CLK1] = &msm8998_bb_clk1,
>>> + [RPM_SMD_BB_CLK1_A] = &msm8998_bb_clk1_a,
>>> + [RPM_SMD_BB_CLK2] = &msm8998_bb_clk2,
>>> + [RPM_SMD_BB_CLK2_A] = &msm8998_bb_clk2_a,
>>> + [RPM_SMD_BB_CLK3_PIN] = &msm8998_bb_clk3_pin,
>>> + [RPM_SMD_BB_CLK3_A_PIN] = &msm8998_bb_clk3_a_pin,
>>> + [RPM_SMD_MMAXI_CLK] = &msm8998_mmssnoc_axi_rpm_clk,
>>> + [RPM_SMD_MMAXI_A_CLK] = &msm8998_mmssnoc_axi_rpm_a_clk,
>>> + [RPM_SMD_AGGR1_NOC_CLK] = &msm8998_aggre1_noc_clk,
>>> + [RPM_SMD_AGGR1_NOC_A_CLK] = &msm8998_aggre1_noc_a_clk,
>>> + [RPM_SMD_AGGR2_NOC_CLK] = &msm8998_aggre2_noc_clk,
>>> + [RPM_SMD_AGGR2_NOC_A_CLK] = &msm8998_aggre2_noc_a_clk,
>>> + [RPM_SMD_QDSS_CLK] = &msm8998_qdss_clk,
>>> + [RPM_SMD_QDSS_A_CLK] = &msm8998_qdss_a_clk,
>>> + [RPM_SMD_RF_CLK1] = &msm8998_rf_clk1,
>>> + [RPM_SMD_RF_CLK1_A] = &msm8998_rf_clk1_a,
>>> + [RPM_SMD_RF_CLK2_PIN] = &msm8998_rf_clk2_pin,
>>> + [RPM_SMD_RF_CLK2_A_PIN] = &msm8998_rf_clk2_a_pin,
>>> + [RPM_SMD_RF_CLK3] = &msm8998_rf_clk3,
>>> + [RPM_SMD_RF_CLK3_A] = &msm8998_rf_clk3_a,
>>> + [RPM_SMD_RF_CLK3_PIN] = &msm8998_rf_clk3_pin,
>>> + [RPM_SMD_RF_CLK3_A_PIN] = &msm8998_rf_clk3_a_pin,
>>> +};
>>> +
>>> +static const struct rpm_smd_clk_desc rpm_clk_msm8998 = {
>>> + .clks = msm8998_clks,
>>> + .num_clks = ARRAY_SIZE(msm8998_clks),
>>> +};
>>> +
>>> static const struct of_device_id rpm_smd_clk_match_table[] = {
>>> { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
>>> { .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 },
>>> { .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 },
>>> + { .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 },
>>> { .compatible = "qcom,rpmcc-qcs404", .data = &rpm_clk_qcs404 },
>>> { }
>>> };
>>> diff --git a/include/dt-bindings/clock/qcom,rpmcc.h
>>> b/include/dt-bindings/clock/qcom,rpmcc.h
>>> index 3658b0c..81dbd1f 100644
>>> --- a/include/dt-bindings/clock/qcom,rpmcc.h
>>> +++ b/include/dt-bindings/clock/qcom,rpmcc.h
>>> @@ -127,5 +127,11 @@
>>> #define RPM_SMD_BIMC_GPU_A_CLK 77
>>> #define RPM_SMD_QPIC_CLK 78
>>> #define RPM_SMD_QPIC_CLK_A 79
>>> +#define RPM_SMD_BB_CLK3_PIN 80
>>> +#define RPM_SMD_BB_CLK3_A_PIN 81
>>> +#define RPM_SMD_RF_CLK3 82
>>> +#define RPM_SMD_RF_CLK3_A 83
>>> +#define RPM_SMD_RF_CLK3_PIN 84
>>> +#define RPM_SMD_RF_CLK3_A_PIN 85
>>> #endif
>>>
>>
>> What's the difference between RPM_SMD_LN_BB_CLK and RPM_SMD_BB_CLK1?
>>
>> $ git grep RPM_SMD_LN_BB_CLK
>> arch/arm64/boot/dts/qcom/msm8996.dtsi: clocks =
>> <&rpmcc RPM_SMD_LN_BB_CLK>,
>> arch/arm64/boot/dts/qcom/msm8996.dtsi:
>> <&rpmcc RPM_SMD_LN_BB_CLK>,
>> drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_LN_BB_CLK] = &msm8996_ln_bb_clk,
>> drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_LN_BB_CLK] = &qcs404_ln_bb_clk,
>> include/dt-bindings/clock/qcom,rpmcc.h:#define
>> RPM_SMD_LN_BB_CLK 74
>>
>>
>> $ git grep 'RPM_SMD_BB_CLK1\>'
>> Documentation/devicetree/bindings/sound/qcom,wcd9335.txt:
>> <&rpmcc RPM_SMD_BB_CLK1>;
>> drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_BB_CLK1] =
>> &msm8916_bb_clk1,
>> drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_BB_CLK1] = &msm8996_bb_clk1,
>> drivers/clk/qcom/clk-smd-rpm.c: [RPM_SMD_BB_CLK1] = &msm8998_bb_clk1,
>> include/dt-bindings/clock/qcom,rpmcc.h:#define
>> RPM_SMD_BB_CLK1 10
>>
>>
>> Because the downstream kernel defines:
>>
>> DEFINE_CLK_RPM_SMD_XO_BUFFER(ln_bb_clk1, ln_bb_clk1_ao, LN_BB_CLK1_ID);
>> DEFINE_CLK_RPM_SMD_XO_BUFFER_PINCTRL(ln_bb_clk1_pin, ln_bb_clk1_pin_ao,
>> LN_BB_CLK1_PIN_ID);
>> DEFINE_CLK_RPM_SMD_XO_BUFFER(ln_bb_clk2, ln_bb_clk2_ao, LN_BB_CLK2_ID);
>> DEFINE_CLK_RPM_SMD_XO_BUFFER_PINCTRL(ln_bb_clk2_pin, ln_bb_clk2_pin_ao,
>> LN_BB_CLK2_PIN_ID);
>> DEFINE_CLK_RPM_SMD_XO_BUFFER(ln_bb_clk3, ln_bb_clk3_ao, LN_BB_CLK3_ID);
>> DEFINE_CLK_RPM_SMD_XO_BUFFER_PINCTRL(ln_bb_clk3_pin, ln_bb_clk3_pin_ao,
>> LN_BB_CLK3_PIN_ID);
>>
>> CLK_LIST(ln_bb_clk1),
>> CLK_LIST(ln_bb_clk1_ao),
>> CLK_LIST(ln_bb_clk1_pin),
>> CLK_LIST(ln_bb_clk1_pin_ao),
>> CLK_LIST(ln_bb_clk2),
>> CLK_LIST(ln_bb_clk2_ao),
>> CLK_LIST(ln_bb_clk2_pin),
>> CLK_LIST(ln_bb_clk2_pin_ao),
>> CLK_LIST(ln_bb_clk3),
>> CLK_LIST(ln_bb_clk3_ao),
>> CLK_LIST(ln_bb_clk3_pin),
>> CLK_LIST(ln_bb_clk3_pin_ao),
>>
>>
>> While your patch defines
>>
>> DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk1, bb_clk1_a, 1);
>> DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8998, bb_clk2, bb_clk2_a, 2);
>> DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8998, bb_clk3_pin,
>> bb_clk3_a_pin, 3);
>>
>> [RPM_SMD_BB_CLK1] = &msm8998_bb_clk1,
>> [RPM_SMD_BB_CLK1_A] = &msm8998_bb_clk1_a,
>> [RPM_SMD_BB_CLK2] = &msm8998_bb_clk2,
>> [RPM_SMD_BB_CLK2_A] = &msm8998_bb_clk2_a,
>> [RPM_SMD_BB_CLK3_PIN] = &msm8998_bb_clk3_pin,
>> [RPM_SMD_BB_CLK3_A_PIN] = &msm8998_bb_clk3_a_pin,
>>
>
> Good question. I don't know.
>
> The downstream ln_bb IDs correspond to the bb IDs used by upstream 8996,
> where as the upstream 8996 ln_bb IDs are different. The IDs seem to be
> the important thing, where as the "name" seems to be fairly irrelevant
> to the actual handling of the clock.
>
> I haven't yet found documentation other than the downstream code about
> these clocks, so I chose to be consistent with 8996.
I found some schematics, and they have "ln_bb", so I'll respin with that
nomenclature after I have a look at your crash.
>
> Also, as a side note, I limited the list of clocks I enumerated to those
> which the downstream driver defined, and were used when grepping the
> downstream DT.
>
--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2] clk: qcom: smd: Add support for MSM8998 rpm clocks
2018-12-07 15:13 ` Jeffrey Hugo
@ 2018-12-10 23:10 ` Jeffrey Hugo
0 siblings, 0 replies; 7+ messages in thread
From: Jeffrey Hugo @ 2018-12-10 23:10 UTC (permalink / raw)
To: Marc Gonzalez, Michael Turquette, Stephen Boyd
Cc: Bjorn Andersson, linux-clk, MSM, LKML
On 12/7/2018 8:13 AM, Jeffrey Hugo wrote:
> On 12/7/2018 7:23 AM, Marc Gonzalez wrote:
>> On 06/12/2018 23:11, Jeffrey Hugo wrote:
>>
>>> Add rpm smd clocks, PMIC and bus clocks which are required on MSM8998
>>> for clients to vote on.
>>>
>>> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
>>> ---
>>> v2
>>> -fix compatible ordering nits per Stephen
>>>
>>> .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
>>> drivers/clk/qcom/clk-smd-rpm.c | 62
>>> ++++++++++++++++++++++
>>> include/dt-bindings/clock/qcom,rpmcc.h | 6 +++
>>> 3 files changed, 69 insertions(+)
>>
>> Hmmm, my board seems to dislike this patch... it locks up for a while,
>> then reboots.
>>
>> [ 6.957289] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag: Sending
>> flag query for idn 1 failed, err = -11
>> [ 6.961233] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry:
>> failed with error -11, retries 2
>> [ 6.970782] ufshcd-qcom 1da4000.ufshc: ufshcd_query_flag_retry:
>> query attribute, opcode 6, idn 1, failed with error -11 after 3 retires
>> [ 6.979576] ufshcd-qcom 1da4000.ufshc: ufshcd_complete_dev_init
>> setting fDeviceInit flag failed with error -11
>> [ 23.432798] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
>> [ 23.432884] rcu: 7-...0: (1 GPs behind)
>> idle=6a2/1/0x4000000000000000 softirq=92/93 fqs=2626
>> [ 23.437927] rcu: (detected by 0, t=5252 jiffies, g=-819, q=112)
>> [ 23.446425] Task dump for CPU 7:
>> [ 23.452567] swapper/0 R running task 0 1 0
>> 0x0000002a
>> [ 23.455806] Call trace:
>> [ 23.462872] __switch_to+0x94/0xe0
>> [ 23.465009] _regmap_write+0x58/0xb0
>> [ 23.468452] _regmap_update_bits+0xf0/0x110
>> [ 23.472186] regmap_update_bits_base+0x60/0x90
>> [ 23.476110] clk_disable_regmap+0x34/0x40
>> [ 23.480614] clk_branch_toggle+0x108/0x1b0
>> [ 23.484681] clk_branch2_disable+0x18/0x20
>> [ 23.488692] clk_disable_unused_subtree+0xc4/0xe0
>> [ 23.492761] clk_disable_unused+0x3c/0x130
>> [ 23.497535] do_one_initcall+0x5c/0x180
>> [ 23.501557] kernel_init_freeable+0x198/0x244
>> [ 23.505276] kernel_init+0x10/0x110
>> [ 23.509768] ret_from_fork+0x10/0x20
>>
>> /*** REBOOT ***/
>> Format: Log Type - Time(microsec) - Message - Optional Info
>> Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
>>
>> I need to check the ufs_reset pin and phy init seq before I can
>> investigate
>> this issue, but I wanted to send a report ASAP.
>>
>
> Hmm. I run with clk_ignore_unused. I'm guessing that something was
> defined that should be used eventually, but isn't used now, and so its
> getting turned off when it probably shouldn't be.
>
> I'll try to repro on my end.
>
I think I figured this out.
The issue appears to be with the mmssnoc_axi_rpm_clk that this patch
defines. Removing that, and I do not observe a crash. This clock will
eventually be needed for the multimedia subsystem (camera and the like).
Marc, it would be good if you could comment out this clock to verify my
observations translate to your setup.
The problem occurs when the rpm driver, during probe, sends the active
settings to the rpm. This causes the rpm to try to access the mmss over
the relevant config noc, and results in an unclocked bus error, which is
a fatal error.
clk_ignore_unused avoids this issue because it leaves on the config noc
clock defined in gcc - gcc_mmss_noc_cfg_ahb_clk
I can see 3 workarounds to this issue -
1. comment out mmssnoc_axi_rpm_clk with an explanation to why, and leave
this problem to whomever needs the clock in the future
2. add the CLK_IGNORE_UNUSED flag to gcc_mmss_noc_cfg_ahb_clk so prevent
it from being disabled (aka a selective version of clk_ignore_unused)
3. add a prepare_enable call to gcc_mmss_noc_cfg_ahb_clk in the gcc
probe, so that there is always one active consumer of the clock (this is
what downstream does)
Stephen, do you have a preference, or an alternative suggestion?
--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-12-10 23:10 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-06 22:11 [PATCH v2] clk: qcom: smd: Add support for MSM8998 rpm clocks Jeffrey Hugo
2018-12-07 10:30 ` Marc Gonzalez
2018-12-07 15:10 ` Jeffrey Hugo
2018-12-07 16:08 ` Jeffrey Hugo
2018-12-07 14:23 ` Marc Gonzalez
2018-12-07 15:13 ` Jeffrey Hugo
2018-12-10 23:10 ` Jeffrey Hugo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).