* Add Ingenic X1000 serial support. @ 2019-01-28 9:19 Zhou Yanjie 2019-01-28 9:19 ` [PATCH 1/2] Serial: Ingenic: Add support for the X1000 Zhou Yanjie ` (3 more replies) 0 siblings, 4 replies; 17+ messages in thread From: Zhou Yanjie @ 2019-01-28 9:19 UTC (permalink / raw) To: linux-mips Cc: linux-kernel, linux-serial, devicetree, robh+dt, paul.burton, gregkh, jslaby, mark.rutland, syq, jiaxun.yang, 772753199 Add Ingenic X1000 serial support. ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 1/2] Serial: Ingenic: Add support for the X1000. 2019-01-28 9:19 Add Ingenic X1000 serial support Zhou Yanjie @ 2019-01-28 9:19 ` Zhou Yanjie 2019-01-28 9:30 ` Greg KH 2019-01-28 10:53 ` Geert Uytterhoeven 2019-01-28 9:19 ` [PATCH 2/2] " Zhou Yanjie ` (2 subsequent siblings) 3 siblings, 2 replies; 17+ messages in thread From: Zhou Yanjie @ 2019-01-28 9:19 UTC (permalink / raw) To: linux-mips Cc: linux-kernel, linux-serial, devicetree, robh+dt, paul.burton, gregkh, jslaby, mark.rutland, syq, jiaxun.yang, 772753199 Add support for probing the 8250_ingenic driver on the X1000 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> --- drivers/tty/serial/8250/8250_ingenic.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index 15a8c8d..1999e3b 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -145,6 +145,10 @@ EARLYCON_DECLARE(jz4780_uart, ingenic_early_console_setup); OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart", ingenic_early_console_setup); +EARLYCON_DECLARE(x1000_uart, ingenic_early_console_setup); +OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart", + ingenic_early_console_setup); + static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) { int ier; @@ -328,12 +332,18 @@ static const struct ingenic_uart_config jz4780_uart_config = { .fifosize = 64, }; +static const struct ingenic_uart_config x1000_uart_config = { + .tx_loadsz = 32, + .fifosize = 64, +}; + static const struct of_device_id of_match[] = { { .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config }, { .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config }, { .compatible = "ingenic,jz4770-uart", .data = &jz4760_uart_config }, { .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config }, { .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config }, + { .compatible = "ingenic,x1000-uart", .data = &x1000_uart_config }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, of_match); -- 2.7.4 ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] Serial: Ingenic: Add support for the X1000. 2019-01-28 9:19 ` [PATCH 1/2] Serial: Ingenic: Add support for the X1000 Zhou Yanjie @ 2019-01-28 9:30 ` Greg KH 2019-01-28 12:44 ` Zhou Yanjie 2019-01-28 10:53 ` Geert Uytterhoeven 1 sibling, 1 reply; 17+ messages in thread From: Greg KH @ 2019-01-28 9:30 UTC (permalink / raw) To: Zhou Yanjie Cc: linux-mips, linux-kernel, linux-serial, devicetree, robh+dt, paul.burton, jslaby, mark.rutland, syq, jiaxun.yang, 772753199 On Mon, Jan 28, 2019 at 05:19:35PM +0800, Zhou Yanjie wrote: > Add support for probing the 8250_ingenic driver on the > X1000 Soc from Ingenic. > > Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> > --- > drivers/tty/serial/8250/8250_ingenic.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) You sent two different patches with the same subject: line, yet they did totally different things. Please fix this up and resend with a better set of subject lines. thanks, greg k-h ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] Serial: Ingenic: Add support for the X1000. 2019-01-28 9:30 ` Greg KH @ 2019-01-28 12:44 ` Zhou Yanjie 0 siblings, 0 replies; 17+ messages in thread From: Zhou Yanjie @ 2019-01-28 12:44 UTC (permalink / raw) To: Greg KH Cc: linux-mips, linux-kernel, linux-serial, devicetree, robh+dt, paul.burton, jslaby, mark.rutland, syq, jiaxun.yang, 772753199 My fault, I will fix these in v2. On 2019年01月28日 17:30, Greg KH wrote: > On Mon, Jan 28, 2019 at 05:19:35PM +0800, Zhou Yanjie wrote: >> Add support for probing the 8250_ingenic driver on the >> X1000 Soc from Ingenic. >> >> Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> >> --- >> drivers/tty/serial/8250/8250_ingenic.c | 10 ++++++++++ >> 1 file changed, 10 insertions(+) > You sent two different patches with the same subject: line, yet they did > totally different things. > > Please fix this up and resend with a better set of subject lines. > > thanks, > > greg k-h ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] Serial: Ingenic: Add support for the X1000. 2019-01-28 9:19 ` [PATCH 1/2] Serial: Ingenic: Add support for the X1000 Zhou Yanjie 2019-01-28 9:30 ` Greg KH @ 2019-01-28 10:53 ` Geert Uytterhoeven 1 sibling, 0 replies; 17+ messages in thread From: Geert Uytterhoeven @ 2019-01-28 10:53 UTC (permalink / raw) To: Zhou Yanjie Cc: linux-mips, Linux Kernel Mailing List, open list:SERIAL DRIVERS, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Rob Herring, Paul Burton, Greg KH, Jiri Slaby, Mark Rutland, syq, jiaxun.yang, 772753199 Hi Zhou, On Mon, Jan 28, 2019 at 10:23 AM Zhou Yanjie <zhouyanjie@zoho.com> wrote: > Add support for probing the 8250_ingenic driver on the > X1000 Soc from Ingenic. > > Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Thanks for your patch! > --- a/drivers/tty/serial/8250/8250_ingenic.c > +++ b/drivers/tty/serial/8250/8250_ingenic.c > @@ -145,6 +145,10 @@ EARLYCON_DECLARE(jz4780_uart, ingenic_early_console_setup); > OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart", > ingenic_early_console_setup); > > +EARLYCON_DECLARE(x1000_uart, ingenic_early_console_setup); > +OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart", > + ingenic_early_console_setup); As of commit 2eaa790989e03900 ("earlycon: Use common framework for earlycon declarations") it is no longer needer to specify both EARLYCON_DECLARE() and OF_EARLYCON_DECLARE(). Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 2/2] Serial: Ingenic: Add support for the X1000. 2019-01-28 9:19 Add Ingenic X1000 serial support Zhou Yanjie 2019-01-28 9:19 ` [PATCH 1/2] Serial: Ingenic: Add support for the X1000 Zhou Yanjie @ 2019-01-28 9:19 ` Zhou Yanjie 2019-01-28 13:56 ` Serial: Ingenic: Add X1000 suppor for the UART driver Zhou Yanjie 2019-01-28 17:03 ` Add Ingenic X1000 serial support Zhou Yanjie 3 siblings, 0 replies; 17+ messages in thread From: Zhou Yanjie @ 2019-01-28 9:19 UTC (permalink / raw) To: linux-mips Cc: linux-kernel, linux-serial, devicetree, robh+dt, paul.burton, gregkh, jslaby, mark.rutland, syq, jiaxun.yang, 772753199 Add support for probing the 8250_ingenic driver on the X1000 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> --- Documentation/devicetree/bindings/serial/ingenic,uart.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt index c3c6406..24ed876 100644 --- a/Documentation/devicetree/bindings/serial/ingenic,uart.txt +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.txt @@ -6,7 +6,8 @@ Required properties: - "ingenic,jz4760-uart", - "ingenic,jz4770-uart", - "ingenic,jz4775-uart", - - "ingenic,jz4780-uart". + - "ingenic,jz4780-uart", + - "ingenic,x1000-uart". - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. - clocks : phandles to the module & baud clocks. -- 2.7.4 ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Serial: Ingenic: Add X1000 suppor for the UART driver. 2019-01-28 9:19 Add Ingenic X1000 serial support Zhou Yanjie 2019-01-28 9:19 ` [PATCH 1/2] Serial: Ingenic: Add support for the X1000 Zhou Yanjie 2019-01-28 9:19 ` [PATCH 2/2] " Zhou Yanjie @ 2019-01-28 13:56 ` Zhou Yanjie 2019-01-28 13:57 ` [PATCH v2 1/2] " Zhou Yanjie 2019-01-28 13:57 ` [PATCH v2 2/2] " Zhou Yanjie 2019-01-28 17:03 ` Add Ingenic X1000 serial support Zhou Yanjie 3 siblings, 2 replies; 17+ messages in thread From: Zhou Yanjie @ 2019-01-28 13:56 UTC (permalink / raw) To: linux-mips Cc: linux-kernel, linux-serial, devicetree, robh+dt, paul.burton, gregkh, jslaby, mark.rutland, syq, jiaxun.yang, 772753199 v1->v2: Remove unnecessary "EARLYCON_DECLARE". ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v2 1/2] Serial: Ingenic: Add X1000 suppor for the UART driver. 2019-01-28 13:56 ` Serial: Ingenic: Add X1000 suppor for the UART driver Zhou Yanjie @ 2019-01-28 13:57 ` Zhou Yanjie 2019-01-28 16:22 ` Greg KH 2019-01-28 13:57 ` [PATCH v2 2/2] " Zhou Yanjie 1 sibling, 1 reply; 17+ messages in thread From: Zhou Yanjie @ 2019-01-28 13:57 UTC (permalink / raw) To: linux-mips Cc: linux-kernel, linux-serial, devicetree, robh+dt, paul.burton, gregkh, jslaby, mark.rutland, syq, jiaxun.yang, 772753199 Add support for probing the 8250_ingenic driver on the X1000 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> --- drivers/tty/serial/8250/8250_ingenic.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index 15a8c8d..424c07c 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -129,22 +129,21 @@ static int __init ingenic_early_console_setup(struct earlycon_device *dev, return 0; } -EARLYCON_DECLARE(jz4740_uart, ingenic_early_console_setup); OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart", ingenic_early_console_setup); -EARLYCON_DECLARE(jz4770_uart, ingenic_early_console_setup); OF_EARLYCON_DECLARE(jz4770_uart, "ingenic,jz4770-uart", ingenic_early_console_setup); -EARLYCON_DECLARE(jz4775_uart, ingenic_early_console_setup); OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart", ingenic_early_console_setup); -EARLYCON_DECLARE(jz4780_uart, ingenic_early_console_setup); OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart", ingenic_early_console_setup); +OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart", + ingenic_early_console_setup); + static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) { int ier; @@ -328,12 +327,18 @@ static const struct ingenic_uart_config jz4780_uart_config = { .fifosize = 64, }; +static const struct ingenic_uart_config x1000_uart_config = { + .tx_loadsz = 32, + .fifosize = 64, +}; + static const struct of_device_id of_match[] = { { .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config }, { .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config }, { .compatible = "ingenic,jz4770-uart", .data = &jz4760_uart_config }, { .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config }, { .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config }, + { .compatible = "ingenic,x1000-uart", .data = &x1000_uart_config }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, of_match); -- 2.7.4 ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v2 1/2] Serial: Ingenic: Add X1000 suppor for the UART driver. 2019-01-28 13:57 ` [PATCH v2 1/2] " Zhou Yanjie @ 2019-01-28 16:22 ` Greg KH 2019-01-28 16:45 ` Zhou Yanjie 0 siblings, 1 reply; 17+ messages in thread From: Greg KH @ 2019-01-28 16:22 UTC (permalink / raw) To: Zhou Yanjie Cc: linux-mips, linux-kernel, linux-serial, devicetree, robh+dt, paul.burton, jslaby, mark.rutland, syq, jiaxun.yang, 772753199 On Mon, Jan 28, 2019 at 09:57:00PM +0800, Zhou Yanjie wrote: > Add support for probing the 8250_ingenic driver on the > X1000 Soc from Ingenic. > > Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> > --- > drivers/tty/serial/8250/8250_ingenic.c | 13 +++++++++---- > 1 file changed, 9 insertions(+), 4 deletions(-) Your subject lines are still identical for both patches :( ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 1/2] Serial: Ingenic: Add X1000 suppor for the UART driver. 2019-01-28 16:22 ` Greg KH @ 2019-01-28 16:45 ` Zhou Yanjie 0 siblings, 0 replies; 17+ messages in thread From: Zhou Yanjie @ 2019-01-28 16:45 UTC (permalink / raw) To: Greg KH Cc: linux-mips, linux-kernel, linux-serial, devicetree, robh+dt, paul.burton, jslaby, mark.rutland, syq, jiaxun.yang, 772753199 I am very sorry, I understood wrong before. On 2019年01月29日 00:22, Greg KH wrote: > On Mon, Jan 28, 2019 at 09:57:00PM +0800, Zhou Yanjie wrote: >> Add support for probing the 8250_ingenic driver on the >> X1000 Soc from Ingenic. >> >> Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> >> --- >> drivers/tty/serial/8250/8250_ingenic.c | 13 +++++++++---- >> 1 file changed, 9 insertions(+), 4 deletions(-) > Your subject lines are still identical for both patches :( ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v2 2/2] Serial: Ingenic: Add X1000 suppor for the UART driver. 2019-01-28 13:56 ` Serial: Ingenic: Add X1000 suppor for the UART driver Zhou Yanjie 2019-01-28 13:57 ` [PATCH v2 1/2] " Zhou Yanjie @ 2019-01-28 13:57 ` Zhou Yanjie 1 sibling, 0 replies; 17+ messages in thread From: Zhou Yanjie @ 2019-01-28 13:57 UTC (permalink / raw) To: linux-mips Cc: linux-kernel, linux-serial, devicetree, robh+dt, paul.burton, gregkh, jslaby, mark.rutland, syq, jiaxun.yang, 772753199 Add support for probing the 8250_ingenic driver on the X1000 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> --- Documentation/devicetree/bindings/serial/ingenic,uart.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt index c3c6406..24ed876 100644 --- a/Documentation/devicetree/bindings/serial/ingenic,uart.txt +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.txt @@ -6,7 +6,8 @@ Required properties: - "ingenic,jz4760-uart", - "ingenic,jz4770-uart", - "ingenic,jz4775-uart", - - "ingenic,jz4780-uart". + - "ingenic,jz4780-uart", + - "ingenic,x1000-uart". - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. - clocks : phandles to the module & baud clocks. -- 2.7.4 ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Add Ingenic X1000 serial support 2019-01-28 9:19 Add Ingenic X1000 serial support Zhou Yanjie ` (2 preceding siblings ...) 2019-01-28 13:56 ` Serial: Ingenic: Add X1000 suppor for the UART driver Zhou Yanjie @ 2019-01-28 17:03 ` Zhou Yanjie 2019-01-28 17:03 ` [PATCH v3 1/2] Serial: Ingenic: Add support for the X1000 Zhou Yanjie 2019-01-28 17:03 ` [PATCH v3 2/2] Dt-bindings: Serial: Add X1000 serial bindings Zhou Yanjie 3 siblings, 2 replies; 17+ messages in thread From: Zhou Yanjie @ 2019-01-28 17:03 UTC (permalink / raw) To: linux-mips Cc: linux-kernel, linux-serial, devicetree, robh+dt, paul.burton, gregkh, jslaby, mark.rutland, syq, jiaxun.yang, 772753199 v1->v2: Remove unnecessary "EARLYCON_DECLARE". v2->v3: Use different subject line for each patch. ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v3 1/2] Serial: Ingenic: Add support for the X1000. 2019-01-28 17:03 ` Add Ingenic X1000 serial support Zhou Yanjie @ 2019-01-28 17:03 ` Zhou Yanjie 2019-10-12 7:35 ` Greg KH 2019-01-28 17:03 ` [PATCH v3 2/2] Dt-bindings: Serial: Add X1000 serial bindings Zhou Yanjie 1 sibling, 1 reply; 17+ messages in thread From: Zhou Yanjie @ 2019-01-28 17:03 UTC (permalink / raw) To: linux-mips Cc: linux-kernel, linux-serial, devicetree, robh+dt, paul.burton, gregkh, jslaby, mark.rutland, syq, jiaxun.yang, 772753199 Add support for probing the 8250_ingenic driver on the X1000 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> --- drivers/tty/serial/8250/8250_ingenic.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index 15a8c8d..424c07c 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -129,22 +129,21 @@ static int __init ingenic_early_console_setup(struct earlycon_device *dev, return 0; } -EARLYCON_DECLARE(jz4740_uart, ingenic_early_console_setup); OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart", ingenic_early_console_setup); -EARLYCON_DECLARE(jz4770_uart, ingenic_early_console_setup); OF_EARLYCON_DECLARE(jz4770_uart, "ingenic,jz4770-uart", ingenic_early_console_setup); -EARLYCON_DECLARE(jz4775_uart, ingenic_early_console_setup); OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart", ingenic_early_console_setup); -EARLYCON_DECLARE(jz4780_uart, ingenic_early_console_setup); OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart", ingenic_early_console_setup); +OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart", + ingenic_early_console_setup); + static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) { int ier; @@ -328,12 +327,18 @@ static const struct ingenic_uart_config jz4780_uart_config = { .fifosize = 64, }; +static const struct ingenic_uart_config x1000_uart_config = { + .tx_loadsz = 32, + .fifosize = 64, +}; + static const struct of_device_id of_match[] = { { .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config }, { .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config }, { .compatible = "ingenic,jz4770-uart", .data = &jz4760_uart_config }, { .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config }, { .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config }, + { .compatible = "ingenic,x1000-uart", .data = &x1000_uart_config }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, of_match); -- 2.7.4 ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v3 1/2] Serial: Ingenic: Add support for the X1000. 2019-01-28 17:03 ` [PATCH v3 1/2] Serial: Ingenic: Add support for the X1000 Zhou Yanjie @ 2019-10-12 7:35 ` Greg KH 2019-10-14 3:28 ` Zhou Yanjie 0 siblings, 1 reply; 17+ messages in thread From: Greg KH @ 2019-10-12 7:35 UTC (permalink / raw) To: Zhou Yanjie Cc: linux-mips, linux-kernel, linux-mmc, devicetree, robh+dt, paul.burton, mark.rutland, syq, ulf.hansson, linus.walleij, armijn, tglx, yuehaibing, malat, ezequiel, paul, linux-serial, jslaby, jiaxun.yang, 772753199 On Sat, Oct 12, 2019 at 01:13:23PM +0800, Zhou Yanjie wrote: > Add support for probing the 8250_ingenic driver on the > X1000 Soc from Ingenic. > > Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> > --- > drivers/tty/serial/8250/8250_ingenic.c | 13 +++++++++---- > 1 file changed, 9 insertions(+), 4 deletions(-) <snip> you seem to have two patches merged into one here, please fix up and resend. thanks, greg k-h ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v3 1/2] Serial: Ingenic: Add support for the X1000. 2019-10-12 7:35 ` Greg KH @ 2019-10-14 3:28 ` Zhou Yanjie 0 siblings, 0 replies; 17+ messages in thread From: Zhou Yanjie @ 2019-10-14 3:28 UTC (permalink / raw) To: Greg KH Cc: linux-mips, linux-kernel, linux-mmc, devicetree, robh+dt, paul.burton, mark.rutland, syq, ulf.hansson, linus.walleij, armijn, tglx, yuehaibing, malat, ezequiel, paul, linux-serial, jslaby, jiaxun.yang, 772753199 Hi Greg, I'm sorry, maybe it was a problem when I git send-email, causing the wrong patch to be sent to you. Just ignore the email about the serial patch please. Best regards! On 2019年10月12日 15:35, Greg KH wrote: > On Sat, Oct 12, 2019 at 01:13:23PM +0800, Zhou Yanjie wrote: >> Add support for probing the 8250_ingenic driver on the >> X1000 Soc from Ingenic. >> >> Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> >> --- >> drivers/tty/serial/8250/8250_ingenic.c | 13 +++++++++---- >> 1 file changed, 9 insertions(+), 4 deletions(-) > <snip> > > you seem to have two patches merged into one here, please fix up and > resend. > > thanks, > > greg k-h ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v3 2/2] Dt-bindings: Serial: Add X1000 serial bindings. 2019-01-28 17:03 ` Add Ingenic X1000 serial support Zhou Yanjie 2019-01-28 17:03 ` [PATCH v3 1/2] Serial: Ingenic: Add support for the X1000 Zhou Yanjie @ 2019-01-28 17:03 ` Zhou Yanjie 2019-01-30 18:46 ` Rob Herring 1 sibling, 1 reply; 17+ messages in thread From: Zhou Yanjie @ 2019-01-28 17:03 UTC (permalink / raw) To: linux-mips Cc: linux-kernel, linux-serial, devicetree, robh+dt, paul.burton, gregkh, jslaby, mark.rutland, syq, jiaxun.yang, 772753199 Add the serial bindings for the X1000 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> --- Documentation/devicetree/bindings/serial/ingenic,uart.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt index c3c6406..24ed876 100644 --- a/Documentation/devicetree/bindings/serial/ingenic,uart.txt +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.txt @@ -6,7 +6,8 @@ Required properties: - "ingenic,jz4760-uart", - "ingenic,jz4770-uart", - "ingenic,jz4775-uart", - - "ingenic,jz4780-uart". + - "ingenic,jz4780-uart", + - "ingenic,x1000-uart". - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. - clocks : phandles to the module & baud clocks. -- 2.7.4 ^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v3 2/2] Dt-bindings: Serial: Add X1000 serial bindings. 2019-01-28 17:03 ` [PATCH v3 2/2] Dt-bindings: Serial: Add X1000 serial bindings Zhou Yanjie @ 2019-01-30 18:46 ` Rob Herring 0 siblings, 0 replies; 17+ messages in thread From: Rob Herring @ 2019-01-30 18:46 UTC (permalink / raw) To: Zhou Yanjie Cc: linux-mips, linux-kernel, linux-serial, devicetree, robh+dt, paul.burton, gregkh, jslaby, mark.rutland, syq, jiaxun.yang, 772753199 On Tue, 29 Jan 2019 01:03:49 +0800, Zhou Yanjie wrote: > Add the serial bindings for the X1000 Soc from Ingenic. > > Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> > --- > Documentation/devicetree/bindings/serial/ingenic,uart.txt | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2019-10-14 3:29 UTC | newest] Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-01-28 9:19 Add Ingenic X1000 serial support Zhou Yanjie 2019-01-28 9:19 ` [PATCH 1/2] Serial: Ingenic: Add support for the X1000 Zhou Yanjie 2019-01-28 9:30 ` Greg KH 2019-01-28 12:44 ` Zhou Yanjie 2019-01-28 10:53 ` Geert Uytterhoeven 2019-01-28 9:19 ` [PATCH 2/2] " Zhou Yanjie 2019-01-28 13:56 ` Serial: Ingenic: Add X1000 suppor for the UART driver Zhou Yanjie 2019-01-28 13:57 ` [PATCH v2 1/2] " Zhou Yanjie 2019-01-28 16:22 ` Greg KH 2019-01-28 16:45 ` Zhou Yanjie 2019-01-28 13:57 ` [PATCH v2 2/2] " Zhou Yanjie 2019-01-28 17:03 ` Add Ingenic X1000 serial support Zhou Yanjie 2019-01-28 17:03 ` [PATCH v3 1/2] Serial: Ingenic: Add support for the X1000 Zhou Yanjie 2019-10-12 7:35 ` Greg KH 2019-10-14 3:28 ` Zhou Yanjie 2019-01-28 17:03 ` [PATCH v3 2/2] Dt-bindings: Serial: Add X1000 serial bindings Zhou Yanjie 2019-01-30 18:46 ` Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).