From: Sharat Masetty <smasetty@codeaurora.org>
To: freedreno@lists.freedesktop.org, devicetree@vger.kernel.org
Cc: dri-devel@freedesktop.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, jcrouse@codeaurora.org,
mka@chromium.org, sibis@codeaurora.org, saravanak@google.com,
viresh.kumar@linaro.org, Sharat Masetty <smasetty@codeaurora.org>
Subject: [PATCH 2/5] arm64: dts: qcom: sc7180: Add GPU DDR BW opp table
Date: Tue, 31 Mar 2020 13:25:50 +0530 [thread overview]
Message-ID: <1585641353-23229-3-git-send-email-smasetty@codeaurora.org> (raw)
In-Reply-To: <1585641353-23229-1-git-send-email-smasetty@codeaurora.org>
This patch adds a new opp table listing the GPU DDR bandwidth opps. Also
adds a required_opp binding to the GPUs main OPP table which holds a
phandle to a bandwidth opp in the new table. This enables linking the
GPU power level opp to the DDR bandwidth opp and helps with scaling
DDR along with GPU frequency.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 50 +++++++++++++++++++++++++++++++++++-
1 file changed, 49 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 51630dd..74b023b 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1715,7 +1715,8 @@
reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc";
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&adreno_smmu 0>;
- operating-points-v2 = <&gpu_opp_table>;
+ operating-points-v2 = <&gpu_opp_table>,
+ <&gpu_ddr_bw_opp_table>;
qcom,gmu = <&gmu>;
interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>;
@@ -1726,40 +1727,87 @@
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ required-opps = <&gpu_ddr_bw_opp9>;
};
opp-650000000 {
opp-hz = /bits/ 64 <650000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ required-opps = <&gpu_ddr_bw_opp8>;
};
opp-565000000 {
opp-hz = /bits/ 64 <565000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ required-opps = <&gpu_ddr_bw_opp6>;
};
opp-430000000 {
opp-hz = /bits/ 64 <430000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ required-opps = <&gpu_ddr_bw_opp6>;
};
opp-355000000 {
opp-hz = /bits/ 64 <355000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ required-opps = <&gpu_ddr_bw_opp4>;
};
opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ required-opps = <&gpu_ddr_bw_opp4>;
};
opp-180000000 {
opp-hz = /bits/ 64 <180000000>;
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ required-opps = <&gpu_ddr_bw_opp2>;
};
};
};
+ gpu_ddr_bw_opp_table: gpu-ddr-bw-opp-table {
+ compatible = "operating-points-v2";
+
+ gpu_ddr_bw_opp1: opp-300000000 {
+ opp-peak-kBps =/bits/ 32 <1200000>;
+ };
+
+ gpu_ddr_bw_opp2: opp-451000000 {
+ opp-peak-kBps =/bits/ 32 <1804000>;
+ };
+
+ gpu_ddr_bw_opp3: opp-547000000 {
+ opp-peak-kBps =/bits/ 32 <2188000>;
+ };
+
+ gpu_ddr_bw_opp4: opp-768000000 {
+ opp-peak-kBps =/bits/ 32 <3072000>;
+ };
+
+ gpu_ddr_bw_opp5: opp-1017000000 {
+ opp-peak-kBps =/bits/ 32 <4068000>;
+ };
+
+ gpu_ddr_bw_opp6: opp-1353000000 {
+ opp-peak-kBps =/bits/ 32 <5412000>;
+ };
+
+ gpu_ddr_bw_opp7: opp-1555000000 {
+ opp-peak-kBps =/bits/ 32 <6220000>;
+ };
+
+ gpu_ddr_bw_opp8: opp-1804000000 {
+ opp-peak-kBps =/bits/ 32 <7216000>;
+ };
+
+ gpu_ddr_bw_opp9: opp-2133000000 {
+ opp-peak-kBps =/bits/ 32 <8532000>;
+ };
+ };
+
adreno_smmu: iommu@5040000 {
compatible = "qcom,sc7180-smmu-v2", "qcom,smmu-v2";
reg = <0 0x05040000 0 0x10000>;
--
2.7.4
next prev parent reply other threads:[~2020-03-31 7:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-31 7:55 [PATCH 0/5] Add support for GPU DDR BW scaling Sharat Masetty
2020-03-31 7:55 ` [PATCH 1/5] arm64: dts: qcom: sc7180: Add interconnect bindings for GPU Sharat Masetty
2020-03-31 7:55 ` Sharat Masetty [this message]
2020-03-31 7:55 ` [PATCH 3/5] drm: msm: scale DDR BW along with GPU frequency Sharat Masetty
2020-03-31 17:26 ` Jordan Crouse
2020-04-01 12:30 ` Sharat Masetty
2020-03-31 7:55 ` [PATCH 4/5] drm: msm: a6xx: Fix off by one error when setting GPU freq Sharat Masetty
2020-03-31 16:43 ` Jordan Crouse
2020-03-31 7:55 ` [PATCH 5/5] dt-bindings: drm/msm/gpu: Document OPP phandle list for the GPU Sharat Masetty
2020-04-10 17:48 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1585641353-23229-3-git-send-email-smasetty@codeaurora.org \
--to=smasetty@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jcrouse@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mka@chromium.org \
--cc=saravanak@google.com \
--cc=sibis@codeaurora.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).