From: Satya Priya <quic_c_skakit@quicinc.com>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, <swboyd@chromium.org>,
<collinsd@codeaurora.org>, <subbaram@codeaurora.org>,
Das Srinagesh <gurus@codeaurora.org>,
<linux-arm-msm@vger.kernel.org>,
"Lee Jones" <lee.jones@linaro.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Satya Priya <quic_c_skakit@quicinc.com>
Subject: [PATCH V4 6/6] arm64: dts: qcom: sc7280: Add pm8008 regulators support for sc7280-idp
Date: Fri, 19 Nov 2021 15:12:33 +0530 [thread overview]
Message-ID: <1637314953-4215-7-git-send-email-quic_c_skakit@quicinc.com> (raw)
In-Reply-To: <1637314953-4215-1-git-send-email-quic_c_skakit@quicinc.com>
Add pm8008 regulators support for sc7280 idp.
Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
---
Changes in V2:
- As per Stephen's comments, replaced '_' with '-' for node names.
Changes in V3:
- Changed the regulator node names as l1, l2 etc
- Changed "pm8008-regulators" to "regulators"
- Changed "qcom,min-dropout-voltage" to "regulator-min-dropout-voltage-microvolt"
Changes in V4:
- Moved all common stuff to pm8008.dtsi and added board specific configurations here.
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 73 ++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index d623d71..f86368d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -309,6 +309,69 @@
};
};
+&i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ #include "pm8008.dtsi"
+};
+
+&pm8008_chip {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pm8008_active>;
+};
+
+&pm8008_regulators {
+ vdd_l1_l2-supply = <&vreg_s8b_1p2>;
+ vdd_l3_l4-supply = <&vreg_s1b_1p8>;
+ vdd_l5-supply = <&vreg_bob>;
+ vdd_l6-supply = <&vreg_bob>;
+ vdd_l7-supply = <&vreg_bob>;
+};
+
+&pm8008_l1 {
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-min-dropout-voltage-microvolt = <96000>;
+};
+
+&pm8008_l2 {
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-min-dropout-voltage-microvolt = <24000>;
+};
+
+&pm8008_l3 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-dropout-voltage-microvolt = <224000>;
+};
+
+&pm8008_l4 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <1600000>;
+ regulator-min-dropout-voltage-microvolt = <0>;
+};
+
+&pm8008_l5 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-dropout-voltage-microvolt = <104000>;
+};
+
+&pm8008_l6 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-dropout-voltage-microvolt = <112000>;
+};
+
+&pm8008_l7 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-min-dropout-voltage-microvolt = <96000>;
+};
+
&qfprom {
vcc-supply = <&vreg_l1c_1p8>;
};
@@ -437,6 +500,16 @@
};
};
+&pm8350c_gpios {
+ pm8008_active: pm8008_active {
+ pins = "gpio4";
+ function = "normal";
+ bias-disable;
+ output-high;
+ power-source = <0>;
+ };
+};
+
&qspi_cs0 {
bias-disable;
};
--
2.7.4
prev parent reply other threads:[~2021-11-19 9:43 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-19 9:42 [PATCH V4 0/6] Add Qualcomm Technologies, Inc. PM8008 regulator driver Satya Priya
2021-11-19 9:42 ` [PATCH V4 1/6] dt-bindings: regulator: Add "regulator-min-dropout-voltage-microvolt" Satya Priya
2021-11-25 15:17 ` Mark Brown
2021-12-06 13:03 ` Satya Priya Kakitapalli (Temp)
2021-12-06 18:25 ` Mark Brown
2021-12-07 15:06 ` Satya Priya Kakitapalli (Temp)
2021-12-07 15:19 ` Mark Brown
2021-12-09 0:56 ` David Collins
2021-12-10 21:11 ` Mark Brown
2022-01-03 14:35 ` Satya Priya Kakitapalli (Temp)
2022-01-04 14:54 ` Mark Brown
2021-11-19 9:42 ` [PATCH V4 2/6] dt-bindings: regulator: Add pm8008 regulator bindings Satya Priya
2021-11-25 15:24 ` Mark Brown
2021-12-06 13:43 ` Satya Priya Kakitapalli (Temp)
2021-12-06 13:47 ` Mark Brown
2021-12-20 12:44 ` Satya Priya Kakitapalli (Temp)
[not found] ` <07dc5ba4-790b-0cb2-bc3e-2ce8d7e3e09d@quicinc.com>
2022-01-10 14:21 ` Mark Brown
2022-01-11 12:15 ` Satya Priya Kakitapalli (Temp)
2022-01-11 13:59 ` Mark Brown
2021-11-19 9:42 ` [PATCH V4 3/6] dt-bindings: mfd: pm8008: Add pm8008 regulator node Satya Priya
2021-11-19 9:42 ` [PATCH V4 4/6] regulator: Add a regulator driver for the PM8008 PMIC Satya Priya
2021-11-25 15:45 ` Mark Brown
2021-12-06 14:43 ` Satya Priya Kakitapalli (Temp)
2021-12-06 15:09 ` Mark Brown
2021-12-20 10:44 ` Satya Priya Kakitapalli (Temp)
2021-11-19 9:42 ` [PATCH V4 5/6] arm64: dts: qcom: pm8008: Add base dts file Satya Priya
2021-11-19 9:42 ` Satya Priya [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1637314953-4215-7-git-send-email-quic_c_skakit@quicinc.com \
--to=quic_c_skakit@quicinc.com \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=collinsd@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=gurus@codeaurora.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=subbaram@codeaurora.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).