From: Kai Huang <kai.huang@intel.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: seanjc@google.com, pbonzini@redhat.com, dave.hansen@intel.com,
len.brown@intel.com, tony.luck@intel.com,
rafael.j.wysocki@intel.com, reinette.chatre@intel.com,
dan.j.williams@intel.com, peterz@infradead.org,
ak@linux.intel.com, kirill.shutemov@linux.intel.com,
sathyanarayanan.kuppuswamy@linux.intel.com,
isaku.yamahata@intel.com, kai.huang@intel.com
Subject: [PATCH v3 03/21] x86/virt/tdx: Implement the SEAMCALL base function
Date: Wed, 6 Apr 2022 16:49:15 +1200 [thread overview]
Message-ID: <1c3f555934c73301a9cbf10232500f3d15efe3cc.1649219184.git.kai.huang@intel.com> (raw)
In-Reply-To: <cover.1649219184.git.kai.huang@intel.com>
Secure Arbitration Mode (SEAM) is an extension of VMX architecture. It
defines a new VMX root operation (SEAM VMX root) and a new VMX non-root
operation (SEAM VMX non-root) which are isolated from legacy VMX root
and VMX non-root mode.
A CPU-attested software module (called the 'TDX module') runs in SEAM
VMX root to manage the crypto-protected VMs running in SEAM VMX non-root.
SEAM VMX root is also used to host another CPU-attested software module
(called the 'P-SEAMLDR') to load and update the TDX module.
Host kernel transits to either the P-SEAMLDR or the TDX module via the
new SEAMCALL instruction. SEAMCALL leaf functions are host-side
interface functions defined by the P-SEAMLDR and the TDX module around
the new SEAMCALL instruction. They are similar to a hypercall, except
they are made by host kernel to the SEAM software.
SEAMCALL leaf functions use an ABI different from the x86-64 system-v
ABI. Instead, they share the same ABI with the TDCALL leaf functions.
%rax is used to carry both the SEAMCALL leaf function number (input) and
the completion status code (output). Additional GPRs (%rcx, %rdx,
%r8->%r11) may be further used as both input and output operands in
individual leaf functions.
Implement a C function __seamcall() to do SEAMCALL leaf functions using
the assembly macro used by __tdx_module_call() (the implementation of
TDCALL leaf functions). The only exception not covered here is TDENTER
leaf function which takes all GPRs and XMM0-XMM15 as both input and
output. The caller of TDENTER should implement its own logic to call
TDENTER directly instead of using this function.
SEAMCALL instruction is essentially a VMExit from VMX root to SEAM VMX
root, and it can fail with VMfailInvalid, for instance, when the SEAM
software module is not loaded. The C function __seamcall() returns
TDX_SEAMCALL_VMFAILINVALID, which doesn't conflict with any actual error
code of SEAMCALLs, to uniquely represent this case.
Signed-off-by: Kai Huang <kai.huang@intel.com>
---
arch/x86/virt/vmx/tdx/Makefile | 2 +-
arch/x86/virt/vmx/tdx/seamcall.S | 52 ++++++++++++++++++++++++++++++++
arch/x86/virt/vmx/tdx/tdx.h | 11 +++++++
3 files changed, 64 insertions(+), 1 deletion(-)
create mode 100644 arch/x86/virt/vmx/tdx/seamcall.S
create mode 100644 arch/x86/virt/vmx/tdx/tdx.h
diff --git a/arch/x86/virt/vmx/tdx/Makefile b/arch/x86/virt/vmx/tdx/Makefile
index 1bd688684716..fd577619620e 100644
--- a/arch/x86/virt/vmx/tdx/Makefile
+++ b/arch/x86/virt/vmx/tdx/Makefile
@@ -1,2 +1,2 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_INTEL_TDX_HOST) += tdx.o
+obj-$(CONFIG_INTEL_TDX_HOST) += tdx.o seamcall.o
diff --git a/arch/x86/virt/vmx/tdx/seamcall.S b/arch/x86/virt/vmx/tdx/seamcall.S
new file mode 100644
index 000000000000..327961b2dd5a
--- /dev/null
+++ b/arch/x86/virt/vmx/tdx/seamcall.S
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+#include <asm/frame.h>
+
+#include "tdxcall.S"
+
+/*
+ * __seamcall() - Host-side interface functions to SEAM software module
+ * (the P-SEAMLDR or the TDX module)
+ *
+ * Transform function call register arguments into the SEAMCALL register
+ * ABI. Return TDX_SEAMCALL_VMFAILINVALID, or the completion status of
+ * the SEAMCALL. Additional output operands are saved in @out (if it is
+ * provided by caller).
+ *
+ *-------------------------------------------------------------------------
+ * SEAMCALL ABI:
+ *-------------------------------------------------------------------------
+ * Input Registers:
+ *
+ * RAX - SEAMCALL Leaf number.
+ * RCX,RDX,R8-R9 - SEAMCALL Leaf specific input registers.
+ *
+ * Output Registers:
+ *
+ * RAX - SEAMCALL completion status code.
+ * RCX,RDX,R8-R11 - SEAMCALL Leaf specific output registers.
+ *
+ *-------------------------------------------------------------------------
+ *
+ * __seamcall() function ABI:
+ *
+ * @fn (RDI) - SEAMCALL Leaf number, moved to RAX
+ * @rcx (RSI) - Input parameter 1, moved to RCX
+ * @rdx (RDX) - Input parameter 2, moved to RDX
+ * @r8 (RCX) - Input parameter 3, moved to R8
+ * @r9 (R8) - Input parameter 4, moved to R9
+ *
+ * @out (R9) - struct tdx_module_output pointer
+ * stored temporarily in R12 (not
+ * used by the P-SEAMLDR or the TDX
+ * module). It can be NULL.
+ *
+ * Return (via RAX) the completion status of the SEAMCALL, or
+ * TDX_SEAMCALL_VMFAILINVALID.
+ */
+SYM_FUNC_START(__seamcall)
+ FRAME_BEGIN
+ TDX_MODULE_CALL host=1
+ FRAME_END
+ ret
+SYM_FUNC_END(__seamcall)
diff --git a/arch/x86/virt/vmx/tdx/tdx.h b/arch/x86/virt/vmx/tdx/tdx.h
new file mode 100644
index 000000000000..9d5b6f554c20
--- /dev/null
+++ b/arch/x86/virt/vmx/tdx/tdx.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _X86_VIRT_TDX_H
+#define _X86_VIRT_TDX_H
+
+#include <linux/types.h>
+
+struct tdx_module_output;
+u64 __seamcall(u64 fn, u64 rcx, u64 rdx, u64 r8, u64 r9,
+ struct tdx_module_output *out);
+
+#endif
--
2.35.1
next prev parent reply other threads:[~2022-04-06 16:06 UTC|newest]
Thread overview: 156+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-06 4:49 [PATCH v3 00/21] TDX host kernel support Kai Huang
2022-04-06 4:49 ` [PATCH v3 01/21] x86/virt/tdx: Detect SEAM Kai Huang
2022-04-18 22:29 ` Sathyanarayanan Kuppuswamy
2022-04-18 22:50 ` Sean Christopherson
2022-04-19 3:38 ` Kai Huang
2022-04-26 20:21 ` Dave Hansen
2022-04-26 23:12 ` Kai Huang
2022-04-26 23:28 ` Dave Hansen
2022-04-26 23:49 ` Kai Huang
2022-04-27 0:22 ` Sean Christopherson
2022-04-27 0:44 ` Kai Huang
2022-04-27 14:22 ` Dave Hansen
2022-04-27 22:39 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 02/21] x86/virt/tdx: Detect TDX private KeyIDs Kai Huang
2022-04-19 5:39 ` Sathyanarayanan Kuppuswamy
2022-04-19 9:41 ` Kai Huang
2022-04-19 5:42 ` Sathyanarayanan Kuppuswamy
2022-04-19 10:07 ` Kai Huang
2022-04-06 4:49 ` Kai Huang [this message]
2022-04-19 14:07 ` [PATCH v3 03/21] x86/virt/tdx: Implement the SEAMCALL base function Sathyanarayanan Kuppuswamy
2022-04-20 4:16 ` Kai Huang
2022-04-20 7:29 ` Sathyanarayanan Kuppuswamy
2022-04-20 10:39 ` Kai Huang
2022-04-26 20:37 ` Dave Hansen
2022-04-26 23:29 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 04/21] x86/virt/tdx: Add skeleton for detecting and initializing TDX on demand Kai Huang
2022-04-19 14:53 ` Sathyanarayanan Kuppuswamy
2022-04-20 4:37 ` Kai Huang
2022-04-20 5:21 ` Dave Hansen
2022-04-20 14:30 ` Sathyanarayanan Kuppuswamy
2022-04-20 22:35 ` Kai Huang
2022-04-26 20:53 ` Dave Hansen
2022-04-27 0:43 ` Kai Huang
2022-04-27 14:49 ` Dave Hansen
2022-04-28 0:00 ` Kai Huang
2022-04-28 14:27 ` Dave Hansen
2022-04-28 23:44 ` Kai Huang
2022-04-28 23:53 ` Dave Hansen
2022-04-29 0:11 ` Kai Huang
2022-04-29 0:26 ` Dave Hansen
2022-04-29 0:59 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 05/21] x86/virt/tdx: Detect P-SEAMLDR and TDX module Kai Huang
2022-04-26 20:56 ` Dave Hansen
2022-04-27 0:01 ` Kai Huang
2022-04-27 14:24 ` Dave Hansen
2022-04-27 21:30 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 06/21] x86/virt/tdx: Shut down TDX module in case of error Kai Huang
2022-04-23 15:39 ` Sathyanarayanan Kuppuswamy
2022-04-25 23:41 ` Kai Huang
2022-04-26 1:48 ` Sathyanarayanan Kuppuswamy
2022-04-26 2:12 ` Kai Huang
2022-04-26 20:59 ` Dave Hansen
2022-04-27 0:06 ` Kai Huang
2022-05-18 16:19 ` Sagi Shahar
2022-05-18 23:51 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 07/21] x86/virt/tdx: Do TDX module global initialization Kai Huang
2022-04-20 22:27 ` Sathyanarayanan Kuppuswamy
2022-04-20 22:37 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 08/21] x86/virt/tdx: Do logical-cpu scope TDX module initialization Kai Huang
2022-04-24 1:27 ` Sathyanarayanan Kuppuswamy
2022-04-25 23:55 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 09/21] x86/virt/tdx: Get information about TDX module and convertible memory Kai Huang
2022-04-25 2:58 ` Sathyanarayanan Kuppuswamy
2022-04-26 0:05 ` Kai Huang
2022-04-27 22:15 ` Dave Hansen
2022-04-28 0:15 ` Kai Huang
2022-04-28 14:06 ` Dave Hansen
2022-04-28 23:14 ` Kai Huang
2022-04-29 17:47 ` Dave Hansen
2022-05-02 5:04 ` Kai Huang
2022-05-25 4:47 ` Kai Huang
2022-05-25 4:57 ` Kai Huang
2022-05-25 16:00 ` Kai Huang
2022-05-18 22:30 ` Sagi Shahar
2022-05-18 23:56 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 10/21] x86/virt/tdx: Add placeholder to coveret all system RAM as TDX memory Kai Huang
2022-04-20 20:48 ` Isaku Yamahata
2022-04-20 22:38 ` Kai Huang
2022-04-27 22:24 ` Dave Hansen
2022-04-28 0:53 ` Kai Huang
2022-04-28 1:07 ` Dave Hansen
2022-04-28 1:35 ` Kai Huang
2022-04-28 3:40 ` Dave Hansen
2022-04-28 3:55 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 11/21] x86/virt/tdx: Choose to use " Kai Huang
2022-04-20 20:55 ` Isaku Yamahata
2022-04-20 22:39 ` Kai Huang
2022-04-28 15:54 ` Dave Hansen
2022-04-29 7:32 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 12/21] x86/virt/tdx: Create TDMRs to cover all system RAM Kai Huang
2022-04-28 16:22 ` Dave Hansen
2022-04-29 7:24 ` Kai Huang
2022-04-29 13:52 ` Dave Hansen
2022-04-06 4:49 ` [PATCH v3 13/21] x86/virt/tdx: Allocate and set up PAMTs for TDMRs Kai Huang
2022-04-28 17:12 ` Dave Hansen
2022-04-29 7:46 ` Kai Huang
2022-04-29 14:20 ` Dave Hansen
2022-04-29 14:30 ` Sean Christopherson
2022-04-29 17:46 ` Dave Hansen
2022-04-29 18:19 ` Sean Christopherson
2022-04-29 18:32 ` Dave Hansen
2022-05-02 5:59 ` Kai Huang
2022-05-02 14:17 ` Dave Hansen
2022-05-02 21:55 ` Kai Huang
2022-04-06 4:49 ` [PATCH v3 14/21] x86/virt/tdx: Set up reserved areas for all TDMRs Kai Huang
2022-04-06 4:49 ` [PATCH v3 15/21] x86/virt/tdx: Reserve TDX module global KeyID Kai Huang
2022-04-06 4:49 ` [PATCH v3 16/21] x86/virt/tdx: Configure TDX module with TDMRs and " Kai Huang
2022-04-06 4:49 ` [PATCH v3 17/21] x86/virt/tdx: Configure global KeyID on all packages Kai Huang
2022-04-06 4:49 ` [PATCH v3 18/21] x86/virt/tdx: Initialize all TDMRs Kai Huang
2022-04-06 4:49 ` [PATCH v3 19/21] x86: Flush cache of TDX private memory during kexec() Kai Huang
2022-04-06 4:49 ` [PATCH v3 20/21] x86/virt/tdx: Add kernel command line to opt-in TDX host support Kai Huang
2022-04-28 17:25 ` Dave Hansen
2022-04-06 4:49 ` [PATCH v3 21/21] Documentation/x86: Add documentation for " Kai Huang
2022-04-14 10:19 ` [PATCH v3 00/21] TDX host kernel support Kai Huang
2022-04-26 20:13 ` Dave Hansen
2022-04-27 1:15 ` Kai Huang
2022-04-27 21:59 ` Dave Hansen
2022-04-28 0:37 ` Kai Huang
2022-04-28 0:50 ` Dave Hansen
2022-04-28 0:58 ` Kai Huang
2022-04-29 1:40 ` Kai Huang
2022-04-29 3:04 ` Dan Williams
2022-04-29 5:35 ` Kai Huang
2022-05-03 23:59 ` Kai Huang
2022-05-04 0:25 ` Dave Hansen
2022-05-04 1:15 ` Kai Huang
2022-05-05 9:54 ` Kai Huang
2022-05-05 13:51 ` Dan Williams
2022-05-05 22:14 ` Kai Huang
2022-05-06 0:22 ` Dan Williams
2022-05-06 0:45 ` Kai Huang
2022-05-06 1:15 ` Dan Williams
2022-05-06 1:46 ` Kai Huang
2022-05-06 15:57 ` Dan Williams
2022-05-09 2:46 ` Kai Huang
2022-05-10 10:25 ` Kai Huang
2022-05-07 0:09 ` Mike Rapoport
2022-05-08 10:00 ` Kai Huang
2022-05-09 10:33 ` Mike Rapoport
2022-05-09 23:27 ` Kai Huang
2022-05-04 14:31 ` Dan Williams
2022-05-04 22:50 ` Kai Huang
2022-04-28 1:01 ` Dan Williams
2022-04-28 1:21 ` Kai Huang
2022-04-29 2:58 ` Dan Williams
2022-04-29 5:43 ` Kai Huang
2022-04-29 14:39 ` Dave Hansen
2022-04-29 15:18 ` Dan Williams
2022-04-29 17:18 ` Dave Hansen
2022-04-29 17:48 ` Dan Williams
2022-04-29 18:34 ` Dave Hansen
2022-04-29 18:47 ` Dan Williams
2022-04-29 19:20 ` Dave Hansen
2022-04-29 21:20 ` Dan Williams
2022-04-29 21:27 ` Dave Hansen
2022-05-02 10:18 ` Kai Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1c3f555934c73301a9cbf10232500f3d15efe3cc.1649219184.git.kai.huang@intel.com \
--to=kai.huang@intel.com \
--cc=ak@linux.intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@intel.com \
--cc=isaku.yamahata@intel.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=kvm@vger.kernel.org \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=peterz@infradead.org \
--cc=rafael.j.wysocki@intel.com \
--cc=reinette.chatre@intel.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=seanjc@google.com \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).