* Re: 2.5.70-mm3
[not found] <Pine.LNX.4.50L0.0306010036140.3349-100000@limbo.dnsalias.org>
@ 2003-05-31 21:45 ` zipa24
2003-05-31 22:13 ` 2.5.70-mm3 Adrian Bunk
2003-06-01 19:42 ` 2.5.70-mm3 Felipe Alfaro Solana
0 siblings, 2 replies; 13+ messages in thread
From: zipa24 @ 2003-05-31 21:45 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="US-ASCII", Size: 25789 bytes --]
>On Sat, 31 May 2003, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-mm3/
I get following OOPS when I try to load snd-ymfpci ALSA module:
---cut
Unable to handle kernel paging request at virtual address 00004205
printing eip:
f0c02106
*pde = 00000000
Oops: 0002 [#1]
PREEMPT
CPU: 0
EIP: 0060:[<f0c02106>] Not tainted VLI
EFLAGS: 00010286
EIP is at +0x106/0x7a0 [snd_ymfpci]
eax: ee832b60 ebx: 000041ed ecx: 00000388 edx: c0348380
esi: 00000800 edi: 00000000 ebp: efed6400 esp: ea2dde84
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 3250, threadinfo=ea2dc000 task=ed9ab330)
Stack: c0348380 00000388 00000004 f0c42da6 c0167c7d effe7ba0 000000d0 effd8300
f0c42e40 ea2d0e00 eb7e0200 000041ed 00000000 03881adf f0c45540 ffffffed
efed6400 00000000 c01e6452 efed6400 f0c0358c efed6400 f0c45540 f0c45540
Call Trace:
[<f0c42da6>] +0x7/0x2a1 [snd_ymfpci]
[<c0167c7d>] alloc_inode+0x14d/0x160
[<f0c42e40>] +0xa1/0x2a1 [snd_ymfpci]
[<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
[<c01e6452>] pci_device_probe_static+0x52/0x70
[<f0c0358c>] +0x8c/0xe0 [snd_ymfpci]
[<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
[<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
[<c01e65bc>] __pci_device_probe+0x3c/0x50
[<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
[<c01e6623>] pci_device_probe+0x53/0x60
[<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
[<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
[<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
[<c0226815>] bus_match+0x45/0x80
[<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
[<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
[<c022693c>] driver_attach+0x5c/0x60
[<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
[<c0226bd3>] bus_add_driver+0x93/0xb0
[<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
[<f0c42e47>] +0xa8/0x2a1 [snd_ymfpci]
[<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
[<f0c455d8>] driver+0x98/0xa0 [snd_ymfpci]
[<c022703f>] driver_register+0x2f/0x40
[<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
[<c01e6870>] pci_register_driver+0x70/0xa0
[<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
[<f0c4b900>] +0x0/0x140 [snd_ymfpci]
[<f0c027b7>] alsa_card_ymfpci_init+0x17/0x60 [snd_ymfpci]
[<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
[<f0c4b900>] +0x0/0x140 [snd_ymfpci]
[<c013163c>] sys_init_module+0x12c/0x240
[<f0c4b900>] +0x0/0x140 [snd_ymfpci]
[<c01091cb>] syscall_call+0x7/0xb
Code: f0 85 c0 78 35 8b 5c 24 2c c7 44 24 0c a6 2d c4 f0 c7 44 24 08 04 00
00 00 89 44 24 04 c7 04 24 80 83 34 c0 e8 cc e5 51 cf 85 c0 <89> 43 18 0f
85 6e 04 00 00 8b 15 40 bd c4 f0 8b 04 95 20 55 c4
---cut
If the driver is build-in I get similar OOPS before init is started.
I also got something similar on some earlier -mm kernels, but 2.5.69-mm7
works fine.
My .config:
---cut
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_EMBEDDED is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_025GB is not set
# CONFIG_05GB is not set
CONFIG_1GB=y
# CONFIG_2GB is not set
# CONFIG_3GB is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_HT_ONLY is not set
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG is not set
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
# CONFIG_ISAPNP is not set
CONFIG_PNPBIOS=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_PCI_WIP=y
CONFIG_IDEDMA_NEW_DRIVE_LISTINGS=y
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_IDEDMA_IVB=y
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
# CONFIG_IP_NF_MATCH_MAC is not set
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
# CONFIG_IP_NF_MATCH_MARK is not set
CONFIG_IP_NF_MATCH_MULTIPORT=y
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
# CONFIG_IP_NF_MATCH_UNCLEAN is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_TARGET_MIRROR is not set
# CONFIG_IP_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_NF_TARGET_LOG=y
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_CSZ is not set
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFQ=m
# CONFIG_NET_SCH_TEQL is not set
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_INGRESS is not set
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=m
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_RCPCI is not set
CONFIG_SHAPER=m
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDDLER is not set
# CONFIG_INPUT_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_UINPUT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ELV=m
# CONFIG_I2C_VELLEMAN is not set
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ELEKTOR=m
CONFIG_I2C_CHARDEV=m
#
# I2C Hardware Sensors Mainboard support
#
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIAPRO=m
#
# I2C Hardware Sensors Chip support
#
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_I2C_SENSOR=m
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD_8151 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_VIDEO_BTCX is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_YMFPCI=m
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# SCSI support is needed for USB Storage
#
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_SPINLINE is not set
CONFIG_KALLSYMS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_KGDB is not set
CONFIG_DEBUG_INFO=y
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_CRC32=m
CONFIG_X86_BIOS_REBOOT=y
---cut
Please tell me if you need any other information.
// /
_____________________________________________________________
Kuukausimaksuton nettiyhteys: http://www.suomi24.fi/liittyma/
Yli 12000 logoa ja soittoääntä: http://sms.suomi24.fi/
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 2.5.70-mm3
2003-05-31 21:45 ` 2.5.70-mm3 zipa24
@ 2003-05-31 22:13 ` Adrian Bunk
2003-06-01 19:42 ` 2.5.70-mm3 Felipe Alfaro Solana
1 sibling, 0 replies; 13+ messages in thread
From: Adrian Bunk @ 2003-05-31 22:13 UTC (permalink / raw)
To: zipa24, perex, alsa-devel; +Cc: Andrew Morton, linux-kernel
On Sun, Jun 01, 2003 at 12:45:02AM +0300, zipa24@suomi24.fi wrote:
> >On Sat, 31 May 2003, Andrew Morton wrote:
>
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-mm3/
>
> I get following OOPS when I try to load snd-ymfpci ALSA module:
>...
Debian bug #193077 [1] lists a similar problem with current ALSA and
kernel 2.4 ...
cu
Adrian
[1] http://bugs.debian.org/193077
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 2.5.70-mm3
2003-05-31 21:45 ` 2.5.70-mm3 zipa24
2003-05-31 22:13 ` 2.5.70-mm3 Adrian Bunk
@ 2003-06-01 19:42 ` Felipe Alfaro Solana
2003-06-02 11:59 ` 2.5.70-mm3 zipa24
1 sibling, 1 reply; 13+ messages in thread
From: Felipe Alfaro Solana @ 2003-06-01 19:42 UTC (permalink / raw)
To: zipa24; +Cc: Andrew Morton, LKML
On Sat, 2003-05-31 at 23:45, zipa24@suomi24.fi wrote:
> >On Sat, 31 May 2003, Andrew Morton wrote:
>
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-mm3/
>
> I get following OOPS when I try to load snd-ymfpci ALSA module:
>
> ---cut
> Unable to handle kernel paging request at virtual address 00004205
> printing eip:
> f0c02106
> *pde = 00000000
> Oops: 0002 [#1]
> PREEMPT
> CPU: 0
> EIP: 0060:[<f0c02106>] Not tainted VLI
> EFLAGS: 00010286
> EIP is at +0x106/0x7a0 [snd_ymfpci]
> eax: ee832b60 ebx: 000041ed ecx: 00000388 edx: c0348380
> esi: 00000800 edi: 00000000 ebp: efed6400 esp: ea2dde84
> ds: 007b es: 007b ss: 0068
> Process modprobe (pid: 3250, threadinfo=ea2dc000 task=ed9ab330)
> Stack: c0348380 00000388 00000004 f0c42da6 c0167c7d effe7ba0 000000d0 effd8300
>
> f0c42e40 ea2d0e00 eb7e0200 000041ed 00000000 03881adf f0c45540 ffffffed
>
> efed6400 00000000 c01e6452 efed6400 f0c0358c efed6400 f0c45540 f0c45540
>
> Call Trace:
> [<f0c42da6>] +0x7/0x2a1 [snd_ymfpci]
> [<c0167c7d>] alloc_inode+0x14d/0x160
> [<f0c42e40>] +0xa1/0x2a1 [snd_ymfpci]
> [<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
> [<c01e6452>] pci_device_probe_static+0x52/0x70
> [<f0c0358c>] +0x8c/0xe0 [snd_ymfpci]
> [<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
> [<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
> [<c01e65bc>] __pci_device_probe+0x3c/0x50
> [<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
> [<c01e6623>] pci_device_probe+0x53/0x60
> [<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
> [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
> [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
> [<c0226815>] bus_match+0x45/0x80
> [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
> [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
> [<c022693c>] driver_attach+0x5c/0x60
> [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
> [<c0226bd3>] bus_add_driver+0x93/0xb0
> [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
> [<f0c42e47>] +0xa8/0x2a1 [snd_ymfpci]
> [<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
> [<f0c455d8>] driver+0x98/0xa0 [snd_ymfpci]
> [<c022703f>] driver_register+0x2f/0x40
> [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
> [<c01e6870>] pci_register_driver+0x70/0xa0
> [<f0c45568>] driver+0x28/0xa0 [snd_ymfpci]
> [<f0c4b900>] +0x0/0x140 [snd_ymfpci]
> [<f0c027b7>] alsa_card_ymfpci_init+0x17/0x60 [snd_ymfpci]
> [<f0c45540>] driver+0x0/0xa0 [snd_ymfpci]
> [<f0c4b900>] +0x0/0x140 [snd_ymfpci]
> [<c013163c>] sys_init_module+0x12c/0x240
> [<f0c4b900>] +0x0/0x140 [snd_ymfpci]
> [<c01091cb>] syscall_call+0x7/0xb
>
> Code: f0 85 c0 78 35 8b 5c 24 2c c7 44 24 0c a6 2d c4 f0 c7 44 24 08 04 00
> 00 00 89 44 24 04 c7 04 24 80 83 34 c0 e8 cc e5 51 cf 85 c0 <89> 43 18 0f
> 85 6e 04 00 00 8b 15 40 bd c4 f0 8b 04 95 20 55 c4
> ---cut
>
> If the driver is build-in I get similar OOPS before init is started.
> I also got something similar on some earlier -mm kernels, but 2.5.69-mm7
> works fine.
>
> My .config:
> ---cut
> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_UID16=y
> CONFIG_GENERIC_ISA_DMA=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
>
> #
> # General setup
> #
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_BSD_PROCESS_ACCT=y
> CONFIG_SYSCTL=y
> CONFIG_LOG_BUF_SHIFT=16
> # CONFIG_EMBEDDED is not set
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> CONFIG_OBSOLETE_MODPARM=y
> # CONFIG_MODVERSIONS is not set
> CONFIG_KMOD=y
>
> #
> # Processor type and features
> #
> CONFIG_X86_PC=y
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_NUMAQ is not set
> # CONFIG_X86_SUMMIT is not set
> # CONFIG_X86_BIGSMP is not set
> # CONFIG_X86_VISWS is not set
> # CONFIG_X86_GENERICARCH is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> CONFIG_MK7=y
> # CONFIG_MK8 is not set
> # CONFIG_MELAN is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_X86_GENERIC is not set
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_USE_3DNOW=y
> # CONFIG_HUGETLB_PAGE is not set
> # CONFIG_SMP is not set
> CONFIG_PREEMPT=y
> CONFIG_X86_UP_APIC=y
> CONFIG_X86_UP_IOAPIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_TSC=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_NONFATAL=y
> # CONFIG_X86_MCE_P4THERMAL is not set
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> # CONFIG_MICROCODE is not set
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> # CONFIG_EDD is not set
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> # CONFIG_025GB is not set
> # CONFIG_05GB is not set
> CONFIG_1GB=y
> # CONFIG_2GB is not set
> # CONFIG_3GB is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> CONFIG_HAVE_DEC_LOCK=y
>
> #
> # Power management options (ACPI, APM)
> #
> CONFIG_PM=y
> # CONFIG_SOFTWARE_SUSPEND is not set
>
> #
> # ACPI Support
> #
> CONFIG_ACPI=y
> # CONFIG_ACPI_HT_ONLY is not set
> CONFIG_ACPI_BOOT=y
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_THERMAL=y
> # CONFIG_ACPI_TOSHIBA is not set
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_BUS=y
> CONFIG_ACPI_INTERPRETER=y
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_PCI=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_APM=m
> # CONFIG_APM_IGNORE_USER_SUSPEND is not set
> # CONFIG_APM_DO_ENABLE is not set
> CONFIG_APM_CPU_IDLE=y
> CONFIG_APM_DISPLAY_BLANK=y
> # CONFIG_APM_RTC_IS_GMT is not set
> # CONFIG_APM_ALLOW_INTS is not set
> # CONFIG_APM_REAL_MODE_POWER_OFF is not set
>
> #
> # CPU Frequency scaling
> #
> # CONFIG_CPU_FREQ is not set
>
> #
> # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_LEGACY_PROC=y
> CONFIG_PCI_NAMES=y
> # CONFIG_ISA is not set
> # CONFIG_MCA is not set
> # CONFIG_SCx200 is not set
> # CONFIG_HOTPLUG is not set
>
> #
> # Executable file formats
> #
> CONFIG_KCORE_ELF=y
> # CONFIG_KCORE_AOUT is not set
> CONFIG_BINFMT_AOUT=m
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=m
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
>
> #
> # Plug and Play support
> #
> CONFIG_PNP=y
> CONFIG_PNP_NAMES=y
> # CONFIG_PNP_DEBUG is not set
>
> #
> # Protocols
> #
> # CONFIG_ISAPNP is not set
> CONFIG_PNPBIOS=y
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_RAM is not set
> # CONFIG_BLK_DEV_INITRD is not set
> # CONFIG_LBD is not set
>
> #
> # ATA/ATAPI/MFM/RLL device support
> #
> CONFIG_IDE=y
>
> #
> # IDE, ATA and ATAPI Block devices
> #
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_IDEDISK_STROKE is not set
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_IDE_TASK_IOCTL is not set
>
> #
> # IDE chipset support/bugfixes
> #
> # CONFIG_BLK_DEV_CMD640 is not set
> # CONFIG_BLK_DEV_IDEPNP is not set
> CONFIG_BLK_DEV_IDEPCI=y
> # CONFIG_BLK_DEV_GENERIC is not set
> CONFIG_IDEPCI_SHARE_IRQ=y
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDE_TCQ is not set
> # CONFIG_BLK_DEV_OFFBOARD is not set
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> CONFIG_BLK_DEV_IDEDMA=y
> CONFIG_IDEDMA_PCI_WIP=y
> CONFIG_IDEDMA_NEW_DRIVE_LISTINGS=y
> CONFIG_BLK_DEV_ADMA=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> # CONFIG_BLK_DEV_PIIX is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> CONFIG_BLK_DEV_VIA82CXXX=y
> CONFIG_IDEDMA_AUTO=y
> CONFIG_IDEDMA_IVB=y
> CONFIG_BLK_DEV_IDE_MODES=y
>
> #
> # SCSI device support
> #
> # CONFIG_SCSI is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
>
> #
> # Fusion MPT device support
> #
>
> #
> # IEEE 1394 (FireWire) support (EXPERIMENTAL)
> #
> # CONFIG_IEEE1394 is not set
>
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
>
> #
> # Networking support
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> # CONFIG_NETLINK_DEV is not set
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> CONFIG_UNIX=y
> CONFIG_NET_KEY=y
> CONFIG_INET=y
> # CONFIG_IP_MULTICAST is not set
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_ARPD is not set
> CONFIG_INET_ECN=y
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_IP_NF_CONNTRACK=y
> CONFIG_IP_NF_FTP=y
> CONFIG_IP_NF_IRC=m
> # CONFIG_IP_NF_TFTP is not set
> # CONFIG_IP_NF_AMANDA is not set
> # CONFIG_IP_NF_QUEUE is not set
> CONFIG_IP_NF_IPTABLES=y
> CONFIG_IP_NF_MATCH_LIMIT=y
> # CONFIG_IP_NF_MATCH_MAC is not set
> # CONFIG_IP_NF_MATCH_PKTTYPE is not set
> # CONFIG_IP_NF_MATCH_MARK is not set
> CONFIG_IP_NF_MATCH_MULTIPORT=y
> # CONFIG_IP_NF_MATCH_TOS is not set
> # CONFIG_IP_NF_MATCH_ECN is not set
> # CONFIG_IP_NF_MATCH_DSCP is not set
> # CONFIG_IP_NF_MATCH_AH_ESP is not set
> # CONFIG_IP_NF_MATCH_LENGTH is not set
> # CONFIG_IP_NF_MATCH_TTL is not set
> # CONFIG_IP_NF_MATCH_TCPMSS is not set
> # CONFIG_IP_NF_MATCH_HELPER is not set
> CONFIG_IP_NF_MATCH_STATE=y
> CONFIG_IP_NF_MATCH_CONNTRACK=y
> # CONFIG_IP_NF_MATCH_UNCLEAN is not set
> # CONFIG_IP_NF_MATCH_OWNER is not set
> CONFIG_IP_NF_FILTER=y
> CONFIG_IP_NF_TARGET_REJECT=y
> # CONFIG_IP_NF_TARGET_MIRROR is not set
> # CONFIG_IP_NF_NAT is not set
> # CONFIG_IP_NF_MANGLE is not set
> CONFIG_IP_NF_TARGET_LOG=y
> # CONFIG_IP_NF_TARGET_ULOG is not set
> # CONFIG_IP_NF_TARGET_TCPMSS is not set
> CONFIG_IP_NF_ARPTABLES=m
> CONFIG_IP_NF_ARPFILTER=m
> # CONFIG_IPV6 is not set
> # CONFIG_XFRM_USER is not set
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> CONFIG_IPV6_SCTP__=y
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_LLC is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
>
> #
> # QoS and/or fair queueing
> #
> CONFIG_NET_SCHED=y
> CONFIG_NET_SCH_CBQ=m
> CONFIG_NET_SCH_HTB=m
> # CONFIG_NET_SCH_CSZ is not set
> CONFIG_NET_SCH_PRIO=m
> # CONFIG_NET_SCH_RED is not set
> CONFIG_NET_SCH_SFQ=m
> # CONFIG_NET_SCH_TEQL is not set
> CONFIG_NET_SCH_TBF=m
> # CONFIG_NET_SCH_GRED is not set
> # CONFIG_NET_SCH_DSMARK is not set
> # CONFIG_NET_SCH_INGRESS is not set
> CONFIG_NET_QOS=y
> CONFIG_NET_ESTIMATOR=y
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_TCINDEX=m
> # CONFIG_NET_CLS_ROUTE4 is not set
> # CONFIG_NET_CLS_FW is not set
> CONFIG_NET_CLS_U32=m
> # CONFIG_NET_CLS_RSVP is not set
> # CONFIG_NET_CLS_RSVP6 is not set
> CONFIG_NET_CLS_POLICE=y
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> CONFIG_NETDEVICES=y
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_ETHERTAP is not set
> # CONFIG_NET_SB1000 is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=m
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_NET_VENDOR_3COM is not set
>
> #
> # Tulip family network device support
> #
> # CONFIG_NET_TULIP is not set
> # CONFIG_HP100 is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_B44 is not set
> # CONFIG_DGRS is not set
> # CONFIG_EEPRO100 is not set
> # CONFIG_E100 is not set
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> CONFIG_VIA_RHINE=y
> CONFIG_VIA_RHINE_MMIO=y
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
>
> #
> # Ethernet (10000 Mbit)
> #
> # CONFIG_IXGB is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Token Ring devices (depends on LLC=y)
> #
> # CONFIG_RCPCI is not set
> CONFIG_SHAPER=m
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
>
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
>
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN_BOOL is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_INPUT_JOYDEV=m
> # CONFIG_INPUT_TSDEV is not set
> CONFIG_INPUT_EVDEV=m
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input I/O drivers
> #
> # CONFIG_GAMEPORT is not set
> CONFIG_SOUND_GAMEPORT=y
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> # CONFIG_MOUSE_SERIAL is not set
> CONFIG_INPUT_JOYSTICK=y
> # CONFIG_JOYSTICK_IFORCE is not set
> # CONFIG_JOYSTICK_WARRIOR is not set
> # CONFIG_JOYSTICK_MAGELLAN is not set
> # CONFIG_JOYSTICK_SPACEORB is not set
> # CONFIG_JOYSTICK_SPACEBALL is not set
> # CONFIG_JOYSTICK_STINGER is not set
> # CONFIG_JOYSTICK_TWIDDLER is not set
> # CONFIG_INPUT_JOYDUMP is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> CONFIG_INPUT_MISC=y
> CONFIG_INPUT_PCSPKR=y
> # CONFIG_INPUT_UINPUT is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
>
> #
> # Serial drivers
> #
> # CONFIG_SERIAL_8250 is not set
>
> #
> # Non-8250 serial port support
> #
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
>
> #
> # I2C support
> #
> CONFIG_I2C=m
> CONFIG_I2C_ALGOBIT=m
> CONFIG_I2C_ELV=m
> # CONFIG_I2C_VELLEMAN is not set
> # CONFIG_SCx200_ACB is not set
> CONFIG_I2C_ALGOPCF=m
> CONFIG_I2C_ELEKTOR=m
> CONFIG_I2C_CHARDEV=m
>
> #
> # I2C Hardware Sensors Mainboard support
> #
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> # CONFIG_I2C_I801 is not set
> # CONFIG_I2C_PIIX4 is not set
> # CONFIG_I2C_SIS96X is not set
> CONFIG_I2C_VIAPRO=m
>
> #
> # I2C Hardware Sensors Chip support
> #
> # CONFIG_SENSORS_ADM1021 is not set
> CONFIG_SENSORS_IT87=m
> CONFIG_SENSORS_LM75=m
> CONFIG_SENSORS_VIA686A=m
> CONFIG_SENSORS_W83781D=m
> CONFIG_I2C_SENSOR=m
>
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> # CONFIG_QIC02_TAPE is not set
>
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_HW_RANDOM is not set
> # CONFIG_NVRAM is not set
> CONFIG_RTC=y
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=m
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_AMD_8151 is not set
> # CONFIG_AGP_INTEL is not set
> # CONFIG_AGP_NVIDIA is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_SWORKS is not set
> CONFIG_AGP_VIA=m
> CONFIG_DRM=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_GAMMA is not set
> # CONFIG_DRM_R128 is not set
> CONFIG_DRM_RADEON=m
> # CONFIG_DRM_MGA is not set
> # CONFIG_MWAVE is not set
> CONFIG_RAW_DRIVER=y
> # CONFIG_HANGCHECK_TIMER is not set
>
> #
> # Multimedia devices
> #
> CONFIG_VIDEO_DEV=m
>
> #
> # Video For Linux
> #
> CONFIG_VIDEO_PROC_FS=y
>
> #
> # Video Adapters
> #
> # CONFIG_VIDEO_BT848 is not set
> # CONFIG_VIDEO_PMS is not set
> # CONFIG_VIDEO_CPIA is not set
> # CONFIG_VIDEO_SAA5249 is not set
> # CONFIG_TUNER_3036 is not set
> # CONFIG_VIDEO_STRADIS is not set
> # CONFIG_VIDEO_ZORAN is not set
> # CONFIG_VIDEO_ZR36120 is not set
> # CONFIG_VIDEO_SAA7134 is not set
> # CONFIG_VIDEO_MXB is not set
> # CONFIG_VIDEO_DPC is not set
>
> #
> # Radio Adapters
> #
> # CONFIG_RADIO_GEMTEK_PCI is not set
> # CONFIG_RADIO_MAXIRADIO is not set
> # CONFIG_RADIO_MAESTRO is not set
>
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
> # CONFIG_VIDEO_BTCX is not set
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=m
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> # CONFIG_EXT2_FS_SECURITY is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> # CONFIG_EXT3_FS_SECURITY is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> CONFIG_REISERFS_FS=y
> # CONFIG_REISERFS_CHECK is not set
> CONFIG_REISERFS_PROC_INFO=y
> CONFIG_JFS_FS=m
> # CONFIG_JFS_POSIX_ACL is not set
> # CONFIG_JFS_DEBUG is not set
> CONFIG_JFS_STATISTICS=y
> CONFIG_FS_POSIX_ACL=y
> # CONFIG_XFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=y
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> # CONFIG_ZISOFS is not set
> # CONFIG_UDF_FS is not set
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> # CONFIG_MSDOS_FS is not set
> CONFIG_VFAT_FS=y
> # CONFIG_NTFS_FS is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_DEVFS_FS=y
> CONFIG_DEVFS_MOUNT=y
> # CONFIG_DEVFS_DEBUG is not set
> CONFIG_DEVPTS_FS=y
> # CONFIG_DEVPTS_FS_XATTR is not set
> CONFIG_TMPFS=y
> CONFIG_RAMFS=y
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Network File Systems
> #
> # CONFIG_NFS_FS is not set
> # CONFIG_NFSD is not set
> # CONFIG_EXPORTFS is not set
> # CONFIG_SMB_FS is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_INTERMEZZO_FS is not set
> # CONFIG_AFS_FS is not set
>
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_NLS=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> CONFIG_NLS_CODEPAGE_850=m
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> CONFIG_NLS_CODEPAGE_932=m
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> CONFIG_NLS_ISO8859_15=m
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=m
>
> #
> # Graphics support
> #
> CONFIG_FB=y
> # CONFIG_FB_CIRRUS is not set
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_IMSTT is not set
> # CONFIG_FB_VGA16 is not set
> # CONFIG_FB_VESA is not set
> CONFIG_VIDEO_SELECT=y
> # CONFIG_FB_HGA is not set
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_MATROX is not set
> CONFIG_FB_RADEON=m
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_PM3 is not set
> # CONFIG_FB_VIRTUAL is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_MDA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> CONFIG_PCI_CONSOLE=y
> CONFIG_FONTS=y
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> # CONFIG_FONT_6x11 is not set
> # CONFIG_FONT_PEARL_8x8 is not set
> # CONFIG_FONT_ACORN_8x8 is not set
> # CONFIG_FONT_MINI_4x6 is not set
> CONFIG_FONT_SUN8x16=y
> CONFIG_FONT_SUN12x22=y
>
> #
> # Logo configuration
> #
> CONFIG_LOGO=y
> CONFIG_LOGO_LINUX_MONO=y
> CONFIG_LOGO_LINUX_VGA16=y
> CONFIG_LOGO_LINUX_CLUT224=y
>
> #
> # Sound
> #
> CONFIG_SOUND=y
>
> #
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=y
> CONFIG_SND_SEQUENCER=m
> # CONFIG_SND_SEQ_DUMMY is not set
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=y
> CONFIG_SND_PCM_OSS=y
> CONFIG_SND_SEQUENCER_OSS=y
> CONFIG_SND_RTCTIMER=y
> CONFIG_SND_VERBOSE_PRINTK=y
> # CONFIG_SND_DEBUG is not set
>
> #
> # Generic devices
> #
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
>
> #
> # PCI devices
> #
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_TRIDENT is not set
> CONFIG_SND_YMFPCI=m
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_FM801 is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> # CONFIG_SND_INTEL8X0 is not set
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_VIA82XX is not set
>
> #
> # ALSA USB devices
> #
> # CONFIG_SND_USB_AUDIO is not set
>
> #
> # Open Sound System
> #
> # CONFIG_SOUND_PRIME is not set
>
> #
> # USB support
> #
> CONFIG_USB=m
> # CONFIG_USB_DEBUG is not set
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_BANDWIDTH is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
>
> #
> # USB Host Controller Drivers
> #
> CONFIG_USB_EHCI_HCD=m
> CONFIG_USB_OHCI_HCD=m
> CONFIG_USB_UHCI_HCD=m
>
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_AUDIO is not set
> # CONFIG_USB_BLUETOOTH_TTY is not set
> # CONFIG_USB_MIDI is not set
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
>
> #
> # SCSI support is needed for USB Storage
> #
>
> #
> # USB Human Interface Devices (HID)
> #
> CONFIG_USB_HID=m
> CONFIG_USB_HIDINPUT=y
> # CONFIG_HID_FF is not set
> CONFIG_USB_HIDDEV=y
>
> #
> # USB HID Boot Protocol drivers
> #
> # CONFIG_USB_KBD is not set
> # CONFIG_USB_MOUSE is not set
> # CONFIG_USB_AIPTEK is not set
> # CONFIG_USB_WACOM is not set
> # CONFIG_USB_KBTAB is not set
> # CONFIG_USB_POWERMATE is not set
> # CONFIG_USB_XPAD is not set
>
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_SCANNER is not set
>
> #
> # USB Multimedia devices
> #
> # CONFIG_USB_DABUSB is not set
> # CONFIG_USB_VICAM is not set
> # CONFIG_USB_DSBR is not set
> # CONFIG_USB_IBMCAM is not set
> # CONFIG_USB_KONICAWC is not set
> # CONFIG_USB_OV511 is not set
> # CONFIG_USB_PWC is not set
> # CONFIG_USB_SE401 is not set
> # CONFIG_USB_STV680 is not set
>
> #
> # USB Network adaptors
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
>
> #
> # USB port drivers
> #
>
> #
> # USB Serial Converter support
> #
> # CONFIG_USB_SERIAL is not set
>
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_TIGL is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_BRLVGER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_TEST is not set
> # CONFIG_USB_GADGET is not set
>
> #
> # Bluetooth support
> #
> # CONFIG_BT is not set
>
> #
> # Profiling support
> #
> # CONFIG_PROFILING is not set
>
> #
> # Kernel hacking
> #
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_DEBUG_STACKOVERFLOW is not set
> # CONFIG_DEBUG_SLAB is not set
> # CONFIG_DEBUG_IOVIRT is not set
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_SPINLINE is not set
> CONFIG_KALLSYMS=y
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_KGDB is not set
> CONFIG_DEBUG_INFO=y
> # CONFIG_FRAME_POINTER is not set
> CONFIG_X86_EXTRA_IRQS=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
>
> #
> # Security options
> #
> # CONFIG_SECURITY is not set
>
> #
> # Cryptographic options
> #
> # CONFIG_CRYPTO is not set
>
> #
> # Library routines
> #
> CONFIG_CRC32=m
> CONFIG_X86_BIOS_REBOOT=y
> ---cut
>
> Please tell me if you need any other information.
Did you compile the kernel with gcc 3.2 or later?
I had a very, very similar oops on my laptop with the snd-ymfpci driver
if I compiled the kernel with gcc 3.2.3. Reverting back to gcc 2.96
solved the problem.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 2.5.70-mm3
2003-06-01 19:42 ` 2.5.70-mm3 Felipe Alfaro Solana
@ 2003-06-02 11:59 ` zipa24
0 siblings, 0 replies; 13+ messages in thread
From: zipa24 @ 2003-06-02 11:59 UTC (permalink / raw)
To: Felipe Alfaro Solana; +Cc: LKML
>Did you compile the kernel with gcc 3.2 or later?
>I had a very, very similar oops on my laptop with the snd-ymfpci driver
>if I compiled the kernel with gcc 3.2.3. Reverting back to gcc 2.96
>solved the problem.
After you suggestion I tried gcc 3.3 and gcc 2.95.3 but I got the same OOPS
as with the original (gcc 3.2.2) version.
There is a new ALSA patch available, but it didn't apply cleanly to -mm3.
If I have time later today I'll see if I can apply only ymfpci-related changes
and if they help.
// /
_____________________________________________________________
Kuukausimaksuton nettiyhteys: http://www.suomi24.fi/liittyma/
Yli 12000 logoa ja soittoääntä: http://sms.suomi24.fi/
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 2.5.70-mm3
2003-06-03 16:51 ` 2.5.70-mm3 Mingming Cao
@ 2003-06-03 17:39 ` Andrew Morton
0 siblings, 0 replies; 13+ messages in thread
From: Andrew Morton @ 2003-06-03 17:39 UTC (permalink / raw)
To: Mingming Cao; +Cc: linux-kernel, linux-mm
Mingming Cao <cmm@us.ibm.com> wrote:
>
> Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-mm3/
> >
> Re run 50 fsx tests overnight again on mm3. The tests are all
> unresponsetive after running a while. There are lots of disk errors and
> one call back trace:
>
> Any idea?
>
>
> SCSI disk error : <2 0 4 0> return code = 0x6000000
> end_request: I/O error, dev sdf, sector 14030152
> SCSI disk error : <2 0 0 0> return code = 0x6000000
> end_request: I/O error, dev sdb, sector 10526936
> SCSI disk error : <2 0 0 0> return code = 0x6000000
> end_request: I/O error, dev sdb, sector 10533048
> SCSI disk error : <2 0 0 0> return code = 0x6000000
> end_request: I/O error, dev sdb, sector 10536376
Sick disk, or sick SCSI driver. Please swap some disks out and if it still
happens, send a report to linux-scsi@vger.kernel.org
> buffer layer error at fs/buffer.c:2835
> Call Trace:
> [<c015a760>] drop_buffers+0xc0/0xd0
> [<c015a7bb>] try_to_free_buffers+0x4b/0xb0
> [<c01a22ef>] journal_invalidatepage+0xdf/0x130
> [<c0193123>] ext3_invalidatepage+0x43/0x50
> [<c0141bb7>] do_invalidatepage+0x27/0x30
> [<c0141c4e>] truncate_complete_page+0x8e/0x90
That's expected - block_prepare_write() marked the page not uptodate when
it saw the I/O error. Although that is a fairly bogus thing to be doing.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 2.5.70-mm3
2003-05-31 8:37 2.5.70-mm3 Andrew Morton
2003-05-31 22:02 ` 2.5.70-mm3 Jordan Breeding
2003-06-02 9:17 ` 2.5.70-mm3 Alistair J Strachan
@ 2003-06-03 16:51 ` Mingming Cao
2003-06-03 17:39 ` 2.5.70-mm3 Andrew Morton
2 siblings, 1 reply; 13+ messages in thread
From: Mingming Cao @ 2003-06-03 16:51 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, linux-mm
Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-mm3/
>
Re run 50 fsx tests overnight again on mm3. The tests are all
unresponsetive after running a while. There are lots of disk errors and
one call back trace:
Any idea?
SCSI disk error : <2 0 4 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 14030152
SCSI disk error : <2 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdb, sector 10526936
SCSI disk error : <2 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdb, sector 10533048
SCSI disk error : <2 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdb, sector 10536376
SCSI disk error : <2 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdb, sector 10538544
SCSI disk error : <2 0 0 0> return code = 0x6000000
end_request: I/O error, dev sdb, sector 10538688
SCSI disk error : <2 0 5 0> return code = 0x6000000
end_request: I/O error, dev sdg, sector 10533024
SCSI disk error : <2 0 5 0> return code = 0x6000000
end_request: I/O error, dev sdg, sector 10533088
SCSI disk error : <2 0 2 0> return code = 0x6000000
end_request: I/O error, dev sdd, sector 10540928
SCSI disk error : <2 0 4 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 10526936
SCSI disk error : <2 0 1 0> return code = 0x6000000
end_request: I/O error, dev sdc, sector 88488
SCSI disk error : <2 0 1 0> return code = 0x6000000
end_request: I/O error, dev sdc, sector 89176
SCSI disk error : <2 0 5 0> return code = 0x6000000
end_request: I/O error, dev sdg, sector 10533776
SCSI disk error : <2 0 6 0> return code = 0x6000000
end_request: I/O error, dev sdh, sector 3566984
SCSI disk error : <2 0 5 0> return code = 0x6000000
end_request: I/O error, dev sdg, sector 10533808
SCSI disk error : <2 0 5 0> return code = 0x6000000
end_request: I/O error, dev sdg, sector 10533936
SCSI disk error : <2 0 5 0> return code = 0x6000000
end_request: I/O error, dev sdg, sector 14005320
SCSI disk error : <2 0 5 0> return code = 0x6000000
end_request: I/O error, dev sdg, sector 14022904
SCSI disk error : <2 0 4 0> return code = 0x6000000
end_request: I/O error, dev sdf, sector 10537240
SCSI disk error : <2 0 5 0> return code = 0x6000000
end_request: I/O error, dev sdg, sector 14023128
SCSI disk error : <2 0 4 0> return code = 0x6000000
buffer layer error at fs/buffer.c:2835
Call Trace:
[<c015a760>] drop_buffers+0xc0/0xd0
[<c015a7bb>] try_to_free_buffers+0x4b/0xb0
[<c01a22ef>] journal_invalidatepage+0xdf/0x130
[<c0193123>] ext3_invalidatepage+0x43/0x50
[<c0141bb7>] do_invalidatepage+0x27/0x30
[<c0141c4e>] truncate_complete_page+0x8e/0x90
[<c0141dd4>] truncate_inode_pages+0xd4/0x2f0
[<c01468fb>] vmtruncate+0x6b/0x100
[<c01712f4>] inode_setattr+0x134/0x150
[<c0194d5a>] ext3_setattr+0x7a/0x1a0
[<c01603be>] cp_new_stat64+0xfe/0x110
[<c01714e0>] notify_change+0x160/0x19d
[<c015339a>] do_truncate+0x6a/0x90
[<c0160487>] sys_fstat64+0x37/0x40
[<c0153688>] sys_ftruncate+0x118/0x1b0
[<c0154d50>] generic_file_llseek+0x0/0xf0
[<c0155089>] sys_lseek+0x69/0xb0
[<c010943f>] syscall_call+0x7/0xb
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 2.5.70-mm3
[not found] <Pine.LNX.4.50L0.0306022121240.3303-100000@limbo.dnsalias.org>
@ 2003-06-02 18:32 ` zipa24
0 siblings, 0 replies; 13+ messages in thread
From: zipa24 @ 2003-06-02 18:32 UTC (permalink / raw)
To: LKML
On Mon, 2 Jun 2003 zipa24@suomi24.fi wrote:
> There is a new ALSA patch available, but it didn't apply cleanly to -mm3.
> If I have time later today I'll see if I can apply only ymfpci-related
> changes and if they help.
The newest ALSA patch touched two ymfpci files, and when I applied them everything
works fine, so I'd expect next -mm work, too.
// /
_____________________________________________________________
Kuukausimaksuton nettiyhteys: http://www.suomi24.fi/liittyma/
Yli 12000 logoa ja soittoääntä: http://sms.suomi24.fi/
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 2.5.70-mm3
[not found] ` <fa.h65tbmk.i5io9k@ifi.uio.no>
@ 2003-06-02 11:50 ` Ed Tomlinson
0 siblings, 0 replies; 13+ messages in thread
From: Ed Tomlinson @ 2003-06-02 11:50 UTC (permalink / raw)
To: Andrew Morton, linux-kernel
Andrew,
This from -mm2 on UP (k6-III 400, 512M):
May 31 09:31:24 oscar kernel: Bad page state at free_hot_cold_page
May 31 09:31:24 oscar kernel: flags:0x01000208 mapping:00000000 mapped:0 count:0
May 31 09:31:24 oscar kernel: Backtrace:
May 31 09:31:24 oscar kernel: Call Trace:
May 31 09:31:24 oscar kernel: [bad_page+70/108] bad_page+0x46/0x6c
May 31 09:31:24 oscar kernel: [free_hot_cold_page+87/212] free_hot_cold_page+0x57/0xd4
May 31 09:31:24 oscar kernel: [__pagevec_free+31/40] __pagevec_free+0x1f/0x28
May 31 09:31:24 oscar kernel: [__pagevec_release_nonlru+117/132] __pagevec_release_nonlru+0x75/0x84
May 31 09:31:24 oscar kernel: [shrink_list+1016/1212] shrink_list+0x3f8/0x4bc
May 31 09:31:24 oscar kernel: [shrink_cache+383/684] shrink_cache+0x17f/0x2ac
May 31 09:31:24 oscar kernel: [shrink_zone+98/108] shrink_zone+0x62/0x6c
May 31 09:31:24 oscar kernel: [balance_pgdat+214/352] balance_pgdat+0xd6/0x160
May 31 09:31:24 oscar kernel: [kswapd+261/268] kswapd+0x105/0x10c
May 31 09:31:24 oscar kernel: [kswapd+0/268] kswapd+0x0/0x10c
May 31 09:31:24 oscar kernel: [autoremove_wake_function+0/56] autoremove_wake_function+0x0/0x38
May 31 09:31:24 oscar kernel: [autoremove_wake_function+0/56] autoremove_wake_function+0x0/0x38
May 31 09:31:24 oscar kernel: [kernel_thread_helper+5/12] kernel_thread_helper+0x5/0xc
May 31 09:31:24 oscar kernel:
May 31 09:31:24 oscar kernel: Trying to fix it up, but a reboot is needed
So far I've not seen this with mm3, but it looks like Alistair has :-( In my case,
this triggered when doing "apt-get -u upgrade". It was a large upgrade as
kde was updated.
Ed
PS. I have more examples if they will help.
Andrew Morton wrote:
> Alistair J Strachan <alistair@devzero.co.uk> wrote:
>>
>> Bad page state at free_hot_cold_page
>> flags:0x01010000 mapping:00000000 mapped:1 count:0
>> Backtrace:
>> Call Trace:
>> [bad_page+93/144] bad_page+0x5d/0x90
>> [free_hot_cold_page+112/256] free_hot_cold_page+0x70/0x100
>> [zap_pte_range+385/448] zap_pte_range+0x181/0x1c0
>> [do_wp_page+437/848] do_wp_page+0x1b5/0x350
>> [zap_pmd_range+75/112] zap_pmd_range+0x4b/0x70
>> [unmap_page_range+75/128] unmap_page_range+0x4b/0x80
>> [unmap_vmas+254/544] unmap_vmas+0xfe/0x220
>> [exit_mmap+109/384] exit_mmap+0x6d/0x180
>> [mmput+65/176] mmput+0x41/0xb0
>> [do_exit+243/832] do_exit+0xf3/0x340
>
> eww, that's a PageDirect page. Never seen that before - it's
> bad.
>
> Is the box SMP?
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 2.5.70-mm3
2003-06-02 9:29 ` 2.5.70-mm3 Andrew Morton
@ 2003-06-02 10:06 ` Alistair J Strachan
0 siblings, 0 replies; 13+ messages in thread
From: Alistair J Strachan @ 2003-06-02 10:06 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1048 bytes --]
On Monday 02 June 2003 10:29, you wrote:
> Alistair J Strachan <alistair@devzero.co.uk> wrote:
> > Bad page state at free_hot_cold_page
> > flags:0x01010000 mapping:00000000 mapped:1 count:0
> > Backtrace:
> > Call Trace:
> > [bad_page+93/144] bad_page+0x5d/0x90
> > [free_hot_cold_page+112/256] free_hot_cold_page+0x70/0x100
> > [zap_pte_range+385/448] zap_pte_range+0x181/0x1c0
> > [do_wp_page+437/848] do_wp_page+0x1b5/0x350
> > [zap_pmd_range+75/112] zap_pmd_range+0x4b/0x70
> > [unmap_page_range+75/128] unmap_page_range+0x4b/0x80
> > [unmap_vmas+254/544] unmap_vmas+0xfe/0x220
> > [exit_mmap+109/384] exit_mmap+0x6d/0x180
> > [mmput+65/176] mmput+0x41/0xb0
> > [do_exit+243/832] do_exit+0xf3/0x340
>
> eww, that's a PageDirect page. Never seen that before - it's
> bad.
>
> Is the box SMP?
Nope, UP, with a UP kernel. I've attached the config I used to compile it, and
a dump of dmesg. Since I rebooted, the machine doesn't seem to have any
problems, so maybe it was a one-off.
Hope this helps.
Cheers,
Alistair.
[-- Attachment #2: dump --]
[-- Type: text/plain, Size: 9928 bytes --]
Linux version 2.5.70-mm3 (root@uberputer.devzero.co.uk) (gcc version 3.3) #3 Sun Jun 1 20:25:53 BST 2003
Video mode to be used for restore is ffff
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=2.5.70-mm3 ro root=302 quiet parport=0x378,7,3
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 751.704 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1486.84 BogoMIPS
Memory: 515216k/524224k available (1902k kernel code, 8264k reserved, 632k data, 176k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000040
CPU: Intel Pentium III (Coppermine) stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v2.0 (20020519)
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfb160, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Enabling SEP on CPU 0
Journalled Block Device driver loaded
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Limiting direct PCI/PCI transfers.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.11
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
tts/0 at I/O 0x3f8 (irq = 4) is a 16550A
tts/1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
anticipatory scheduling elevator
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
NET3 PLIP version 2.4-parport gniibe@mri.co.jp
plip0: Parallel port at 0x378, using IRQ 7.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Linux video capture interface: v1.00
bttv: driver version 0.9.4 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Host bridge is PCI device 8086:7190
bttv: Host bridge needs ETBF enabled.
bttv: Bt8xx card found (0).
PCI: Found IRQ 11 for device 00:0e.0
PCI: Sharing IRQ 11 with 00:0e.1
bttv0: Bt878 (rev 17) at 00:0e.0, irq: 11, latency: 64, mmio: 0xee000000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected]
bttv0: enabling ETBF (430FX/VP3 compatibilty)
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
bttv0: Hauppauge eeprom: model=61344, tuner=Philips FM1216 (5), radio=yes
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
msp34xx: init: chip=MSP3415D-B3 +nicam +simple
msp3410: daemon started
registering 0-0040
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
SAA5249 driver (SAA5249 interface) for VideoText version 1.7
tuner: chip found @ 0xc2
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
registering 0-0061
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: FUJITSU MPE3273AH, ATA DISK drive
hdb: IOMEGA ZIP 250 ATAPI Floppy, ATAPI FLOPPY drive
anticipatory scheduling elevator
anticipatory scheduling elevator
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: Pioneer DVD-ROM ATAPIModel DVD-115 0133, ATAPI CD/DVD-ROM drive
hdd: SONY CD-RW CRX175A1, ATAPI CD/DVD-ROM drive
anticipatory scheduling elevator
anticipatory scheduling elevator
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 53359376 sectors (27320 MB) w/2048KiB Cache, CHS=52935/16/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
end_request: I/O error, dev hdd, sector 0
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
PCI: Found IRQ 10 for device 00:07.2
uhci-hcd 00:07.2: PCI device 8086:7112
uhci-hcd 00:07.2: irq 10, io base 0000e000
Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated.
uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
drivers/usb/core/usb.c: registered new driver usbscanner
drivers/usb/image/scanner.c: 0.4.13:USB Scanner Driver
mice: PS/2 mouse device common for all mice
drivers/input/joystick/sidewinder.c: Init 0: Opened pci00:10.1/gameport0, io 0xe800, speed 1242
sidewinder.c: Read 0 triplets. []
drivers/input/joystick/sidewinder.c: Init 1: Mode 1. Length 0.
sidewinder.c: Read 0 triplets. []
drivers/input/joystick/sidewinder.c: Init 1b: Length 0.
gameport: PCI device 1102:7002 at pci00:10.1 speed 1242 kHz
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
i2c /dev entries driver module version 2.7.0 (20021208)
Creative EMU10K1 PCI Audio Driver, version 0.20, 17:42:05 Jun 1 2003
PCI: Found IRQ 12 for device 00:10.0
emu10k1: EMU10K1 rev 7 model 0x8026 found, IO at 0xe400-0xe41f, IRQ 12
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
IPv4 over IPv4 tunneling driver
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 1, assigned address 2
kjournald starting. Commit interval 5 seconds
hub 1-1:0: USB hub found
hub 1-1:0: 4 ports detected
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 176k freed
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301
hub 1-0:0: new USB device on port 2, assigned address 3
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-00:07.2-2
hub 1-1:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 1, assigned address 4
drivers/usb/image/scanner.c: USB scanner device (0x04b8/0x0110) now attached to usb/scanner0
hub 1-1:0: debounce: port 2: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 2, assigned address 5
hub 1-1:0: debounce: port 3: delay 100ms stable 4 status 0x301
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hub 1-1:0: new USB device on port 3, assigned address 6
input: USB HID v1.00 Joystick [Microsoft Microsoft SideWinder Precision Pro (USB)] on usb-00:07.2-1.3
hub 1-1:0: debounce: port 4: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 4, assigned address 7
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0001
Adding 262136k swap on /var/cache/swap. Priority:5 extents:1058
[-- Attachment #3: kernelops-2.5 --]
[-- Type: text/plain, Size: 20670 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_EMBEDDED is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_KMOD is not set
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_025GB is not set
# CONFIG_05GB is not set
CONFIG_1GB=y
# CONFIG_2GB is not set
# CONFIG_3GB is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI Support
#
# CONFIG_ACPI is not set
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG is not set
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_GENERIC is not set
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_TOS is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
CONFIG_IP_NF_IRC=y
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_UNCLEAN=y
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_MIRROR=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=y
CONFIG_IP_NF_NAT_IRC=y
CONFIG_IP_NF_NAT_FTP=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=y
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
CONFIG_GAMEPORT=y
CONFIG_SOUND_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDDLER is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_INPUT_JOYDUMP is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=64
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_PHILIPSPAR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_VELLEMAN is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_CHARDEV=y
#
# I2C Hardware Sensors Mainboard support
#
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C Hardware Sensors Chip support
#
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD_8151 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
#
# Video Adapters
#
CONFIG_VIDEO_BT848=y
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
CONFIG_VIDEO_SAA5249=y
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_VIDEOBUF=y
CONFIG_VIDEO_TUNER=y
CONFIG_VIDEO_BUF=y
CONFIG_VIDEO_BTCX=y
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
CONFIG_SOUND_EMU10K1=y
CONFIG_MIDI_EMU10K1=y
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
#
# SCSI support is needed for USB Storage
#
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_SCANNER=y
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_SPINLINE is not set
CONFIG_KALLSYMS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_KGDB is not set
CONFIG_DEBUG_INFO=y
# CONFIG_FRAME_POINTER is not set
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_X86_BIOS_REBOOT=y
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 2.5.70-mm3
2003-06-02 9:17 ` 2.5.70-mm3 Alistair J Strachan
@ 2003-06-02 9:29 ` Andrew Morton
2003-06-02 10:06 ` 2.5.70-mm3 Alistair J Strachan
0 siblings, 1 reply; 13+ messages in thread
From: Andrew Morton @ 2003-06-02 9:29 UTC (permalink / raw)
To: Alistair J Strachan; +Cc: linux-kernel
Alistair J Strachan <alistair@devzero.co.uk> wrote:
>
> Bad page state at free_hot_cold_page
> flags:0x01010000 mapping:00000000 mapped:1 count:0
> Backtrace:
> Call Trace:
> [bad_page+93/144] bad_page+0x5d/0x90
> [free_hot_cold_page+112/256] free_hot_cold_page+0x70/0x100
> [zap_pte_range+385/448] zap_pte_range+0x181/0x1c0
> [do_wp_page+437/848] do_wp_page+0x1b5/0x350
> [zap_pmd_range+75/112] zap_pmd_range+0x4b/0x70
> [unmap_page_range+75/128] unmap_page_range+0x4b/0x80
> [unmap_vmas+254/544] unmap_vmas+0xfe/0x220
> [exit_mmap+109/384] exit_mmap+0x6d/0x180
> [mmput+65/176] mmput+0x41/0xb0
> [do_exit+243/832] do_exit+0xf3/0x340
eww, that's a PageDirect page. Never seen that before - it's
bad.
Is the box SMP?
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 2.5.70-mm3
2003-05-31 8:37 2.5.70-mm3 Andrew Morton
2003-05-31 22:02 ` 2.5.70-mm3 Jordan Breeding
@ 2003-06-02 9:17 ` Alistair J Strachan
2003-06-02 9:29 ` 2.5.70-mm3 Andrew Morton
2003-06-03 16:51 ` 2.5.70-mm3 Mingming Cao
2 siblings, 1 reply; 13+ messages in thread
From: Alistair J Strachan @ 2003-06-02 9:17 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Saturday 31 May 2003 09:37, Andrew Morton wrote:
>
> . More ext3 fixes. It seems fully recovered now.
>
> . Some cleanups and enhancements to the O_SYNC rework.
>
> . A couple of fairly significant reiserfs enhancements. See the changelogs
> in the individual patches for details.
>
Not sure if this is related to the -mm patches or the bk snapshot, but I left
2.5.70-mm3 compiling KDE all last night, and when I got up this morning I
found the machine had oopsed and was in an unusable state. Though I wasn't
able to note down the final oops, I did get two warnings that were dumped to
kern.log moments before the machine died.
Bad page state at free_hot_cold_page
flags:0x01010000 mapping:00000000 mapped:1 count:0
Backtrace:
Call Trace:
[bad_page+93/144] bad_page+0x5d/0x90
[free_hot_cold_page+112/256] free_hot_cold_page+0x70/0x100
[zap_pte_range+385/448] zap_pte_range+0x181/0x1c0
[do_wp_page+437/848] do_wp_page+0x1b5/0x350
[zap_pmd_range+75/112] zap_pmd_range+0x4b/0x70
[unmap_page_range+75/128] unmap_page_range+0x4b/0x80
[unmap_vmas+254/544] unmap_vmas+0xfe/0x220
[exit_mmap+109/384] exit_mmap+0x6d/0x180
[mmput+65/176] mmput+0x41/0xb0
[do_exit+243/832] do_exit+0xf3/0x340
[do_group_exit+52/128] do_group_exit+0x34/0x80
[sysenter_past_esp+82/113] sysenter_past_esp+0x52/0x71
Trying to fix it up, but a reboot is needed
Bad page state at prep_new_page
flags:0x01010000 mapping:00000000 mapped:1 count:0
Backtrace:
Call Trace:
[bad_page+93/144] bad_page+0x5d/0x90
[prep_new_page+64/96] prep_new_page+0x40/0x60
[buffered_rmqueue+167/320] buffered_rmqueue+0xa7/0x140
[ext3_readpages+0/48] ext3_readpages+0x0/0x30
[__alloc_pages+144/848] __alloc_pages+0x90/0x350
[__get_free_pages+26/80] __get_free_pages+0x1a/0x50
[cache_grow+161/544] cache_grow+0xa1/0x220
[cache_alloc_refill+324/512] cache_alloc_refill+0x144/0x200
[kmem_cache_alloc+62/64] kmem_cache_alloc+0x3e/0x40
[__kfree_skb+68/272] alloc_skb+0x24/0xe0
[sock_no_connect+7/16] sock_alloc_send_pskb+0xc7/0x1d0
[sock_no_sendpage+111/192] sock_alloc_send_skb+0x2f/0x40
[sense_data_texts+692/1008] unix_dgram_sendmsg+0x134/0x4d0
[__generic_file_aio_read+468/528] __generic_file_aio_read+0x1d4/0x210
[ide_build_dmatable+128/416] ide_build_sglist+0x40/0xb0
[vlan_ioctl_set+19/48] sock_aio_write+0xc3/0xf0
[do_sync_write+182/240] do_sync_write+0xb6/0xf0
[update_wall_time+22/64] update_wall_time+0x16/0x40
[do_IRQ+197/240] do_IRQ+0xc5/0xf0
[autoremove_wake_function+0/80] autoremove_wake_function+0x0/0x50
[schedule+432/896] schedule+0x1b0/0x380
[default_wake_function+0/48] default_wake_function+0x0/0x30
[update_wall_time+22/64] update_wall_time+0x16/0x40
[do_timer+224/240] do_timer+0xe0/0xf0
[vfs_write+255/304] vfs_write+0xff/0x130
[sys_write+66/112] sys_write+0x42/0x70
[sysenter_past_esp+82/113] sysenter_past_esp+0x52/0x71
Trying to fix it up, but a reboot is needed
As the machine was doing compilation, nothing extraneous was loaded (like X),
but it could easily have been under stress at the time of oops. I guess I'm
just making sure it's got nothing to do with your ext3 changes.
Cheers,
Alistair.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: 2.5.70-mm3
2003-05-31 8:37 2.5.70-mm3 Andrew Morton
@ 2003-05-31 22:02 ` Jordan Breeding
2003-06-02 9:17 ` 2.5.70-mm3 Alistair J Strachan
2003-06-03 16:51 ` 2.5.70-mm3 Mingming Cao
2 siblings, 0 replies; 13+ messages in thread
From: Jordan Breeding @ 2003-05-31 22:02 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, linux-mm
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello,
I have some good new and some bad news about 2.5.70-mm3.
The good news:
The reiserfs changes seem to be stable, I have been running this
kernel on an all reiserfs box since this morning and everything seems
completely fine with it.
The bad news:
Somewhere in the changes brought in from Linus BK (I assume since
there were USB changes there, but none that I noticed in your changes),
all my USB keyboard LEDs stopped working. Numlock and capslock still
seem to function correctly but the LEDs on the keyboard no longer work,
with 2.5.70-mm2 they worked on VTs and in X, with 2.5.70-mm3 they don't
work on either.
Jordan
Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-mm3/
>
> . More ext3 fixes. It seems fully recovered now.
>
> . Some cleanups and enhancements to the O_SYNC rework.
>
> . A couple of fairly significant reiserfs enhancements. See the changelogs
> in the individual patches for detail
> <snipped>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQE+2SZ9SigNyqq/SRwRAuNRAJ41zmOyRsBSAhfZgEnvtdEEvCM3lgCgnGuZ
awd9bdIuzRipIrQBM+sAvH8=
=rDoY
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 13+ messages in thread
* 2.5.70-mm3
@ 2003-05-31 8:37 Andrew Morton
2003-05-31 22:02 ` 2.5.70-mm3 Jordan Breeding
` (2 more replies)
0 siblings, 3 replies; 13+ messages in thread
From: Andrew Morton @ 2003-05-31 8:37 UTC (permalink / raw)
To: linux-kernel, linux-mm
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.5/2.5.70/2.5.70-mm3/
. More ext3 fixes. It seems fully recovered now.
. Some cleanups and enhancements to the O_SYNC rework.
. A couple of fairly significant reiserfs enhancements. See the changelogs
in the individual patches for details.
Changes since 2.5.70-mm2:
-coda-typo-fix.patch
-sysenter-nmi-fix-2.patch
-pccardd-suspend-fix.patch
-resume-oops-fix.patch
-export-mmu_cr4_features.patch
-visws-irq-update.patch
-zoran_procfs-copy-user-fix.patch
-irq_balance-fix-2.patch
-i2o-leak-comment.patch
-write_one_page-cleanup.patch
-unlink-speedup-speedup.patch
-remove-fcntl-check.patch
-unregister_netdev-cleanup.patch
-64-bit-pci_alloc_consistent.patch
-svcsock-use-after-free-fix.patch
-writev-retval-fix.patch
-isdn-typo-fix.patch
Merged
-slabinfo-rework.patch
Dropped for now, so slab-magazine-layer.patch gets standalone testing.
+reiserfs-parser-fix-remount.patch
Reiserfs mount option parsing enhancements
+reiserfs-small-blocksize.patch
Support smaler blocksizes in reiserfs
+raid-fixes.patch
+neilb-raid1-double-free-fix.patch
Might fix raid crashes
+mtd-build-fix.patch
Compile fix
+hugetlbfs-mount-options.patch
Allow hugetlbfs to be mouted with different uid/gid/umask
-jbd-560-transaction-leak-fix.patch
Folded into other things
+jbd-580-log_start_commit-race-fix.patch
Tighten locking
+ext3-035-journal_try_to_free_buffers-race-fix.patch
+ext3-040-recursive-ext3_write_inode-check.patch
+ext3-050-ioctl-transaction-leak.patch
+ext3-070-xattr-clone-leak-fix.patch
ext3 fixes
-O_SYNC-speedup.patch
+O_SYNC-speedup-2.patch
Reworked quite a bit. Now the IO submit happens outside i_sem as well as
the waiting.
+sysv-sem-16-bit-pif-fix.patch
sysv sem fix for >32k pids
+remove-LINUX_2_2.patch
Cleanup
All 144 patches:
linus.patch
mm.patch
add -mmN to EXTRAVERSION
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kmalloc_percpu-interface-change.patch
kmalloc_percpu: interface change.
kmalloc_percpu-interface-change-warning-fix.patch
nail a warning
DEFINE_PERCPU-in-modules.patch
per-cpu support inside modules (minimal)
slab-magazine-layer.patch
magazine layer for slab
aio-random-cleanups.patch
config_spinline.patch
uninline spinlocks for profiling accuracy.
ppc64-ioctl-pci-update.patch
From: Anton Blanchard <anton@samba.org>
Subject: ppc64 stuff
ppc64-reloc_hide.patch
sym-do-160.patch
make the SYM driver do 160 MB/sec
irqreturn-snd-via-fix.patch
via sound irqreturn fix
irq_cpustat-cleanup.patch
irq_cpustat cleanup
config-PAGE_OFFSET.patch
Configurable kenrel/user memory split
irq-check-rate-limit.patch
IRQs: handle bad return values from handlers
irq_desc-others.patch
Fix up irq_desc initialisation for non-ia32
common-ioctl32.patch
From: Pavel Machek <pavel@suse.cz>
Subject: Re: must-fix list, v5
ioctl32-cleanup-sparc64.patch
ioctl32 cleanup: sparc64
ioctl32-cleanup-x86_64.patch
ioctl32 cleanup: sparc64
lru_cache_add-check.patch
lru_cache_add debug check
fb-image-depth-fix.patch
fbdev image depth fix
reiserfs-parser-fix-remount.patch
reiserfs option parser fix and ability to pass options to remount
reiserfs-small-blocksize.patch
reiserfs support for blocksizes other than 4096 bytes
raid-fixes.patch
gix RAID things
neilb-raid1-double-free-fix.patch
raid1 double-free fix
mtd-build-fix.patch
MTD build fix
buffer-debug.patch
buffer.c debugging
hugetlbfs-mount-options.patch
hugetlbfs: mount options and permissions
VM_RESERVED-check.patch
VM_RESERVED check
rcu-stats.patch
RCU statistics reporting
ide_setting_sem-fix.patch
reslabify-pgds-and-pmds.patch
re-slabify i386 pgd's and pmd's
raid5-use-right-dev-fix.patch
raid5 fix
linux-isp.patch
isp-update-1.patch
list_del-debug.patch
list_del debug check
airo-schedule-fix.patch
airo.c: don't sleep in atomic regions
synaptics-mouse-support.patch
Add Synaptics touchpad tweaking to psmouse driver
deadline-hash-removal-fix.patch
DEADLINE: hash removal fix
resurrect-batch_requests.patch
bring back the batch_requests function
kblockd.patch
Create `kblockd' workqueue
cfq-infrastructure.patch
elevator-completion-api.patch
elevator completion API
as-iosched.patch
anticipatory I/O scheduler
as-proc-read-write.patch
AS: pgbench improvement
as-discrete-read-fifo-batches.patch
AS: discrete read fifo batches
as-sync-async.patch
AS sync/async batches
as-hash-removal-fix.patch
AS: hash removal fix
as-jumbo-patch-for-scsi.patch
AS jumbo patch (for SCSI and TCQ)
unplug-use-kblockd.patch
Use kblockd for running request queues
cfq-2.patch
CFQ scheduler, #2
CFQ: update to rq-dyn API
cfq-hash-removal-fix.patch
CFQ: hash removal fix
per-queue-nr_requests.patch
per queue nr_requests
blk-invert-watermarks.patch
blk_congestion_wait threshold cleanup
unmap-page-debugging.patch
unmap unused pages for debugging
CONFIG_DEBUG_PAGEALLOC-extras.patch
From: Manfred Spraul <manfred@colorfullife.com>
Subject: DEBUG_PAGEALLOC
print-build-options-on-oops.patch
print a few config options on oops
fremap-all-mappings.patch
Make all executable mappings be nonlinear
sound-irq-hack.patch
show_task-free-stack-fix.patch
show_task() fix and cleanup
put_task_struct-debug.patch
ia32-mknod64.patch
mknod64 for ia32
ext2-64-bit-special-inodes.patch
ext2: support for 64-bit device nodes
ext3-64-bit-special-inodes.patch
ext3: support for 64-bit device nodes
64-bit-dev_t-kdev_t.patch
64-bit dev_t and kdev_t
oops-dump-preceding-code.patch
i386 oops output: dump preceding code
lockmeter.patch
time-interpolation-infrastructure.patch
improved core support for time-interpolation
thread-info-in-task_struct.patch
allow thread_info to be allocated as part of task_struct
reinstate-task-freeing-hack-for-ia64.patch
reinstate lame task_struct (non)-refcounting hack/fix
ext3-no-bkl.patch
journal_get_write_access-speedup.patch
ext3-concurrent-block-inode-allocation.patch
Subject: [PATCH] concurrent block/inode allocation for EXT3
ext3-orlov-approx-counter-fix.patch
Fix orlov allocator boundary case
ext3-concurrent-block-allocation-fix-1.patch
ext3-concurrent-block-allocation-hashed.patch
Subject: Re: [PATCH] concurrent block/inode allocation for EXT3
ext3-concurrent-block-inode-allocation-fix.patch
fix ext3 inode allocator race
jbd-010-b_committed_data-race-fix.patch
Subject: Re: [Ext2-devel] [RFC] probably bug in current ext3/jbd
jbd-020-locking-schema.patch
plan JBD locking schema
jbd-030-remove-splice_lock.patch
remove jh_splice_lock
jbd-040-journal_add_journal_head-locking.patch
fine-grain journal_add_journal_head locking
jbd-045-rename-journal_unlock_journal_head.patch
rename journal_unlock_journal_head to journal_put_journal_head
jbd-050-b_frozen_data-locking.patch
Finish protection of journal_head.b_frozen_data
jbd-060-b_committed_data-locking.patch
jbd-070-b_transaction-locking.patch
implement b_transaction locking rules
jbd-080-b_next_transaction-locking.patch
Implement b_next_transaction locking rules
jbd-090-b_tnext-locking.patch
b_tnext locking
jbd-100-remove-journal_datalist_lock.patch
remove journal_datalist_lock
jbd-110-t_nr_buffers-locking.patch
t_nr_buffers locking
jbd-120-t_updates-locking.patch
t_updates locking
jbd-130-t_outstanding_credits-locking.patch
implement t_outstanding_credits locking
jbd-140-t_jcb-locking.patch
implement t_jcb locking
jbd-150-j_barrier_count-locking.patch
implement j_barrier_count locking
jbd-160-j_running_transaction-locking.patch
implement j_running_transaction locking
jbd-170-j_committing_transaction-locking.patch
implement j_committing_transaction locking
jbd-180-j_checkpoint_transactions.patch
implement j_checkpoint_transactions locking
jbd-190-j_head-locking.patch
implement journal->j_head locking
jbd-200-j_tail-locking.patch
implement journal->j_tail locking
jbd-210-j_free-locking.patch
implement journal->j_free locking
jbd-220-j_commit_sequence-locking.patch
implement journal->j_commit_sequence locking
jbd-230-j_commit_request-locking.patch
implement j_commit_request locking
jbd-240-dual-revoke-tables.patch
implement dual revoke tables.
jbd-250-remove-sleep_on.patch
remove remaining sleep_on()s
jbd-300-remove-lock_kernel-journal_c.patch
remove lock_kernel() calls from journal.c
jbd-310-remove-lock_kernel-transaction_c.patch
remove lock_kernel calls from transaction.c
jbd-400-remove-lock_journal-checkpoint_c.patch
remove lock_journal calls from checkpoint.c
jbd-410-remove-lock_journal-commit_c.patch
remove lock_journal() from commit.c
jbd-420-remove-lock_journal-journal_c.patch
remove lock_journal() calls from journal.c
jbd-430-remove-lock_journal-transaction_c.patch
remove lock_journal() calls from transaction.c
transaction leak and race fix
jbd-440-remove-lock_journal.patch
remove lock_journal()
jbd-510-h_credits-fix.patch
journal_release_buffer: handle credits fix
jbd-520-journal_unmap_buffer-race.patch
journal_unmap_buffer race fix
jbd-530-walk_page_buffers-race-fix.patch
ext3_writepage race fix
jbd-540-journal_try_to_free_buffers-race-fix.patch
buffer freeing non-race comment
jbd-550-locking-checks.patch
add some locking assertions
jbd-570-transaction-state-locking.patch
additional transaction shutdown locking
jbd-580-log_start_commit-race-fix.patch
fix log_start_commit race
ext3-010-fix-journalled-data.patch
Remove incorrect assertion from ext3
ext3-020-journal_dirty_metadata-speedup.patch
ext3-035-journal_try_to_free_buffers-race-fix.patch
ext3-040-recursive-ext3_write_inode-check.patch
ext3: add a dump_stack()
ext3-050-ioctl-transaction-leak.patch
ext3: fix error-path handle leak
ext3-070-xattr-clone-leak-fix.patch
Fix leak in ext3_acl_chmod()
invalidate_mmap_range.patch
Interface to invalidate regions of mmaps
aio-01-retry.patch
AIO: Core retry infrastructure
aio-02-lockpage_wq.patch
AIO: Async page wait
aio-03-fs_read.patch
AIO: Filesystem aio read
aio-04-buffer_wq.patch
AIO: Async buffer wait
aio-05-fs_write.patch
AIO: Filesystem aio write
aio-05-fs_write-fix.patch
aio-06-bread_wq.patch
AIO: Async block read
aio-06-bread_wq-fix.patch
aio-07-ext2getblk_wq.patch
AIO: Async get block for ext2
aio-poll.patch
aio_poll
aio-poll: don't put extern decls in .c!
vfsmount_lock.patch
From: Maneesh Soni <maneesh@in.ibm.com>
Subject: [patch 1/2] vfsmount_lock
proc-kcore-rework.patch
/proc/kcore fixes
syncppp-locking-fix.patch
syncppp locking fix
s390-dirty-bit-cleaning.patch
dirty bit clearing on s390.
min_free_kbytes.patch
/proc/sys/vm/min_free_kbytes
sched-hot-balancing-fix.patch
fix for CPU scheduler load distribution
O_SYNC-speedup-2.patch
speed up O_SYNC writes
sysv-sem-16-bit-pif-fix.patch
remove 16-bit pid assumption from ipc/sem.c
remove-LINUX_2_2.patch
Remove LINUX_2_2
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2003-06-03 17:29 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <Pine.LNX.4.50L0.0306010036140.3349-100000@limbo.dnsalias.org>
2003-05-31 21:45 ` 2.5.70-mm3 zipa24
2003-05-31 22:13 ` 2.5.70-mm3 Adrian Bunk
2003-06-01 19:42 ` 2.5.70-mm3 Felipe Alfaro Solana
2003-06-02 11:59 ` 2.5.70-mm3 zipa24
[not found] <Pine.LNX.4.50L0.0306022121240.3303-100000@limbo.dnsalias.org>
2003-06-02 18:32 ` 2.5.70-mm3 zipa24
[not found] <fa.j88qmt3.1s0mkrl@ifi.uio.no>
[not found] ` <fa.h65tbmk.i5io9k@ifi.uio.no>
2003-06-02 11:50 ` 2.5.70-mm3 Ed Tomlinson
2003-05-31 8:37 2.5.70-mm3 Andrew Morton
2003-05-31 22:02 ` 2.5.70-mm3 Jordan Breeding
2003-06-02 9:17 ` 2.5.70-mm3 Alistair J Strachan
2003-06-02 9:29 ` 2.5.70-mm3 Andrew Morton
2003-06-02 10:06 ` 2.5.70-mm3 Alistair J Strachan
2003-06-03 16:51 ` 2.5.70-mm3 Mingming Cao
2003-06-03 17:39 ` 2.5.70-mm3 Andrew Morton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).