* PROBLEM: IRQ balancing with SMP failed with system load
@ 2003-11-01 22:04 dav
0 siblings, 0 replies; only message in thread
From: dav @ 2003-11-01 22:04 UTC (permalink / raw)
To: linux-kernel
hi, i've a trouble with Linux 2.4- kernels on SMP station with XEON processors.
Problem seems to be linked with IRQ generated by network traffic, and occurs
after a variable period (a few days or a few weeks, best now is 21 days with
RedHat(9) kernel.
IRQ are not rightly balanced between each processor on SMP RedHat 9/x86 system,
with too heavy load with high network traffic (and so, a lot of IRQs for NICs).
This occurs with a lot of kernel tested (2.4.20, 2.4.21, 2.4.22, 2.4.22-ac4).
At this time, we are running RedHat kernel :
# cat /proc/version
Linux version 2.4.20-8smp (bhcompile@porky.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 SMP Thu Mar 13 17:45:54 EST 2003
# w | head -1
22:34:33 up 21 days, 8:04, 3 users, load average: 1.17, 1.02, 0.99
# ps axuw
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.0 0.0 1372 472 ? S Oct07 0:20 init
root 2 0.0 0.0 0 0 ? SW Oct07 0:00 [migration/0]
root 3 0.0 0.0 0 0 ? SW Oct07 0:00 [migration/1]
root 4 0.0 0.0 0 0 ? SW Oct07 0:00 [migration/2]
root 5 0.0 0.0 0 0 ? SW Oct07 0:00 [migration/3]
root 6 0.0 0.0 0 0 ? SW Oct07 0:00 [keventd]
root 7 6.0 0.0 0 0 ? RWN Oct07 1862:18 [ksoftirqd_CPU0]
root 8 0.0 0.0 0 0 ? SWN Oct07 0:00 [ksoftirqd_CPU1]
root 9 0.0 0.0 0 0 ? SWN Oct07 0:00 [ksoftirqd_CPU2]
root 10 0.0 0.0 0 0 ? SWN Oct07 0:00 [ksoftirqd_CPU3]
root 15 0.0 0.0 0 0 ? SW Oct07 0:00 [bdflush]
root 11 0.0 0.0 0 0 ? SW Oct07 0:11 [kswapd]
root 12 0.0 0.0 0 0 ? SW Oct07 0:00 [kscand/DMA]
root 13 0.0 0.0 0 0 ? SW Oct07 4:43 [kscand/Normal]
root 14 0.0 0.0 0 0 ? SW Oct07 5:47 [kscand/HighMem]
root 16 0.0 0.0 0 0 ? SW Oct07 0:05 [kupdated]
root 17 0.0 0.0 0 0 ? SW Oct07 0:00 [mdrecoveryd]
root 23 0.0 0.0 0 0 ? SW Oct07 0:00 [aacraid]
root 24 0.0 0.0 0 0 ? SW Oct07 0:00 [scsi_eh_0]
root 27 0.0 0.0 0 0 ? SW Oct07 0:02 [kjournald]
root 84 0.0 0.0 0 0 ? SW Oct07 0:00 [khubd]
root 642 0.0 0.0 0 0 ? SW Oct07 0:00 [kjournald]
root 643 0.0 0.0 0 0 ? SW Oct07 0:13 [kjournald]
root 1210 0.0 0.0 1448 588 ? S Oct07 0:09 syslogd -m 0
root 1214 0.0 0.0 1368 428 ? S Oct07 0:00 klogd -x
root 1266 0.0 0.1 3580 1396 ? S Oct07 0:02 /usr/sbin/sshd
.../...
This system is used only to route packets (asymetric routing, inside our network to outside only),
without iptables rules (due to this trouble but we've planned initialy to set netfilter rules).
When system is loaded (by process ksoftirq_CPU0), some datas are lost (monitorring system reports
each 10 minuts CRITICAL alerts => 50% of warning report for packet lost).
report trafic when this issue occurs is like this :
.../...
eth5|Recv: 2.169G|Sent: 1.591G|Recv Speed: 1.25Kb/s|Sent speed: 1.03Mb/s|
eth5|Recv: 2.169G|Sent: 1.591G|Recv Speed: nanb/s|Sent speed: nanb/s|
eth5|Recv: 2.169G|Sent: 1.594G|Recv Speed: 0b/s|Sent speed: 776.96Kb/s|
eth5|Recv: 2.169G|Sent: 1.596G|Recv Speed: 1.75Kb/s|Sent speed: 958.87Kb/s|
eth5|Recv: 2.169G|Sent: 1.599G|Recv Speed: 939b/s|Sent speed: 978.17Kb/s|
eth5|Recv: 2.169G|Sent: 1.603G|Recv Speed: 640b/s|Sent speed:1009.87Kb/s|
eth5|Recv: 2.169G|Sent: 1.607G|Recv Speed: 85b/s|Sent speed: 1.29Mb/s|
eth5|Recv: 2.169G|Sent: 1.611G|Recv Speed: 853b/s|Sent speed: 1.28Mb/s|
eth5|Recv: 2.169G|Sent: 1.615G|Recv Speed: 0b/s|Sent speed: 1.68Mb/s|
.../...
And we can see :
# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 184391788 0 0 0 IO-APIC-edge timer
1: 953 0 0 0 IO-APIC-edge keyboard
2: 0 0 0 0 XT-PIC cascade
5: 0 0 0 0 IO-APIC-level usb-ohci
8: 1 0 0 0 IO-APIC-edge rtc
14: 2 0 0 0 IO-APIC-edge ide0
16: 6640100 0 0 0 IO-APIC-level eth0
20: 2347915 0 0 0 IO-APIC-level eth2
21: 3242586 0 0 0 IO-APIC-level eth3
28: 1362515262 0 0 0 IO-APIC-level eth4
29: 1127825818 0 0 0 IO-APIC-level eth5
30: 831193 0 0 0 IO-APIC-level aacraid
NMI: 0 0 0 0
LOC: 184394043 184394090 184394090 184394089
ERR: 0
MIS: 0
Datas are transmit like following :
--------------------- OUT NETWORK ---------------------->|<--- OUTSIDE (INTERNET) -----
...applications servers +--------+(eth4) Linux box (eth5)+----------+ router +--- ...
eth4 Link encap:Ethernet HWaddr 00:06:5B:F3:61:5F
inet addr:192.168.20.245 Bcast:192.168.20.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2184189475 errors:0 dropped:0 overruns:0 frame:0
TX packets:2195331 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:717500525 (684.2 Mb) TX bytes:153729558 (146.6 Mb)
Interrupt:28
eth5 Link encap:Ethernet HWaddr 00:06:5B:F3:61:60
inet addr:194.xxx.xxx.248 Bcast:194.xxx.xxx.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:26145681 errors:0 dropped:0 overruns:0 frame:0
TX packets:2205082845 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:2328890724 (2221.0 Mb) TX bytes:1860452584 (1774.2 Mb)
Interrupt:29
Additional informations about system can be found at the end of this message.
Thanks if anyone know how to fix or solve this issue ;-(
At this time, the only answer we found is to switch gateway with H.A
process, and reboot the box with kernel process "broken" ;-(
dav.
--
# cat /proc/modules
tg3 52904 2
e100 62340 3
ipt_LOG 4280 0 (autoclean)
ipt_limit 1688 0 (autoclean)
ipt_REJECT 3928 0 (autoclean)
iptable_mangle 2776 0 (autoclean) (unused)
ipt_state 1080 0 (autoclean)
iptable_nat 22904 0 (autoclean)
ip_conntrack 29696 2 (autoclean) [ipt_state iptable_nat]
iptable_filter 2412 0 (autoclean)
ip_tables 15864 9 [ipt_LOG ipt_limit ipt_REJECT iptable_mangle ipt_state iptable_nat iptable_filter]
keybdev 2976 0 (unused)
mousedev 5656 0 (unused)
hid 22308 0 (unused)
input 6208 0 [keybdev mousedev hid]
usb-ohci 22216 0 (unused)
usbcore 82592 1 [hid usb-ohci]
ext3 73376 3
jbd 56336 3 [ext3]
aacraid 32580 4
sd_mod 13452 8
scsi_mod 110488 2 [aacraid sd_mod]
# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
08b0-08bf : ServerWorks CSB5 IDE Controller
08b0-08b7 : ide0
08b8-08bf : ide1
0cf8-0cff : PCI conf1
9000-9fff : PCI Bus #07
9800-98ff : Adaptec RAID subsystem HBA (#2)
9c00-9cff : Adaptec RAID subsystem HBA
c000-cfff : PCI Bus #03
ccc0-ccdf : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#4)
ccc0-ccdf : e100
cce0-ccff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#3)
cce0-ccff : e100
d000-dfff : PCI Bus #02
dcc0-dcdf : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2)
dcc0-dcdf : e100
dce0-dcff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
dce0-dcff : e100
e800-e8ff : ATI Technologies Inc Rage XL
ec80-ecbf : Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di
ece8-ecef : Dell Computer Corporation Embedded Systems Management Device 4
ecf4-ecf7 : PCI device 1028:000d (Dell Computer Corporation)
ecf8-ecff : Dell Computer Corporation Embedded Systems Management Device 4
# cat /proc/iomem
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000cc5ff : Extension ROM
000f0000-000fffff : System ROM
00100000-3ffeffff : System RAM
00100000-002720eb : Kernel code
002720ec-00383ba3 : Kernel data
3fff0000-3fffebff : ACPI Tables
3fffec00-3fffefff : reserved
f0000000-f7ffffff : Dell Computer Corporation PowerEdge Expandable RAID Controller 3
fc300000-fc4fffff : PCI Bus #07
fc3fe000-fc3fefff : Adaptec RAID subsystem HBA (#2)
fc3ff000-fc3fffff : Adaptec RAID subsystem HBA
fc600000-fc60ffff : Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (#2)
fc600000-fc60ffff : tg3
fc610000-fc61ffff : Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet
fc610000-fc61ffff : tg3
fc700000-fc7fffff : PCI Bus #03
fc7fe000-fc7fefff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#4)
fc7fe000-fc7fefff : e100
fc7ff000-fc7fffff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#3)
fc7ff000-fc7fffff : e100
fc800000-fc8fffff : PCI Bus #02
fc8fe000-fc8fefff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2)
fc8fe000-fc8fefff : e100
fc8ff000-fc8fffff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
fc8ff000-fc8fffff : e100
fca00000-fccfffff : PCI Bus #03
fca00000-fcafffff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#4)
fca00000-fcafffff : e100
fcb00000-fcbfffff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#3)
fcb00000-fcbfffff : e100
fcd00000-fcffffff : PCI Bus #02
fcd00000-fcdfffff : Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2)
fcd00000-fcdfffff : e100
fce00000-fcefffff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
fce00000-fcefffff : e100
fd000000-fdffffff : ATI Technologies Inc Rage XL
fe100000-fe100fff : ServerWorks OSB4/CSB5 OHCI USB Controller
fe100000-fe100fff : usb-ohci
fe101000-fe101fff : ATI Technologies Inc Rage XL
fe102000-fe102fff : Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di
feb00000-feb7ffff : Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di
feb80000-feb80fff : Dell Computer Corporation Embedded Systems Management Device 4
fec00000-fec0ffff : reserved
fee00000-fee0ffff : reserved
fff80000-ffffffff : reserved
00:00.0 Host bridge: ServerWorks CMIC-LE (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.1 Host bridge: ServerWorks CMIC-LE
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:00.2 Host bridge: ServerWorks: Unknown device 0000
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:04.0 Class ff00: Dell Computer Corporation Embedded Systems Management Device 4
Subsystem: Dell Computer Corporation Embedded Systems Management Device 4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Interrupt: pin A routed to IRQ 19
Region 0: Memory at feb80000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at ecf8 [size=8]
Region 2: I/O ports at ece8 [size=8]
Expansion ROM at fe000000 [disabled] [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.1 Class ff00: Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di
Subsystem: Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 23
Region 0: Memory at fe102000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at ec80 [size=64]
Region 2: Memory at feb00000 (32-bit, prefetchable) [size=512K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.2 Class 0c07: Dell Computer Corporation: Unknown device 000d
Subsystem: Dell Computer Corporation: Unknown device 000d
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 27
Region 0: I/O ports at ecf4 [size=4]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
Subsystem: Dell Computer Corporation: Unknown device 0121
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 10
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at e800 [size=256]
Region 2: Memory at fe101000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Host bridge: ServerWorks CSB5 South Bridge (rev 93)
Subsystem: ServerWorks CSB5 South Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) (prog-if 82 [Master PriP])
Subsystem: ServerWorks CSB5 IDE Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at 08b0 [size=16]
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05) (prog-if 10 [OHCI])
Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=4K]
00:0f.3 ISA bridge: ServerWorks GCLE Host Bridge
Subsystem: ServerWorks: Unknown device 0230
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:10.0 Host bridge: ServerWorks: Unknown device 0101 (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: [60] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=4
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
00:10.2 Host bridge: ServerWorks: Unknown device 0101 (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: [60] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=4
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
00:11.0 Host bridge: ServerWorks: Unknown device 0101 (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: [60] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=4
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
00:11.2 Host bridge: ServerWorks: Unknown device 0101 (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Capabilities: [60] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=4
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
01:06.0 PCI bridge: Intel Corp. 21152 PCI-to-PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Bus: primary=01, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fcd00000-fcffffff
Prefetchable memory behind bridge: 00000000fc800000-00000000fc800000
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
01:08.0 PCI bridge: Intel Corp. 21152 PCI-to-PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Bus: primary=01, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fca00000-fccfffff
Prefetchable memory behind bridge: 00000000fc700000-00000000fc700000
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
02:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05)
Subsystem: Intel Corp. EtherExpress PRO/100+ Dual Port Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 10
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc8ff000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at dce0 [size=32]
Region 2: Memory at fce00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:05.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05)
Subsystem: Intel Corp. EtherExpress PRO/100+ Dual Port Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 10
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fc8fe000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at dcc0 [size=32]
Region 2: Memory at fcd00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05)
Subsystem: Intel Corp. EtherExpress PRO/100+ Dual Port Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 10
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fc7ff000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at cce0 [size=32]
Region 2: Memory at fcb00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:05.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05)
Subsystem: Intel Corp. EtherExpress PRO/100+ Dual Port Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 10
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fc7fe000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at ccc0 [size=32]
Region 2: Memory at fca00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
05:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15)
Subsystem: Dell Computer Corporation Broadcom BCM5701 1000Base-T
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), cache line size 10
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fc610000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
Address: 52f48734a4062484 Data: c906
05:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15)
Subsystem: Dell Computer Corporation Broadcom BCM5701 1000Base-T
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), cache line size 10
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fc600000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=0
Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
Address: d616aa75c6ef8af0 Data: 80a0
06:08.0 PCI bridge: Intel Corp.: Unknown device 0309 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Bus: primary=06, secondary=07, subordinate=07, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: fc300000-fc4fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
06:08.1 RAID bus controller: Dell Computer Corporation PowerEdge Expandable RAID Controller 3 (rev 01)
Subsystem: Dell Computer Corporation PowerEdge Expandable RAID Controller 3/Di
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at fc200000 [disabled] [size=64K]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
07:06.0 SCSI storage controller: Adaptec RAID subsystem HBA (rev 01)
Subsystem: Dell Computer Corporation PowerEdge 2550
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), cache line size 10
Interrupt: pin A routed to IRQ 30
BIST result: 00
Region 0: I/O ports at 9c00 [size=256]
Region 1: Memory at fc3ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fc400000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
07:06.1 SCSI storage controller: Adaptec RAID subsystem HBA (rev 01)
Subsystem: Dell Computer Corporation PowerEdge 2550
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), cache line size 10
Interrupt: pin B routed to IRQ 31
BIST result: 00
Region 0: I/O ports at 9800 [size=256]
Region 1: Memory at fc3fe000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fc400000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: DELL Model: PERCRAID RAID10 Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
# cat /proc/net/netstat
TcpExt: SyncookiesSent SyncookiesRecv SyncookiesFailed EmbryonicRsts PruneCalled RcvPruned OfoPruned OutOfWindowIcmps LockDroppedIcmps ArpFilter TW TWRecycled TWKilled PAWSPassive PAWSActive PAWSEstab DelayedACKs DelayedACKLocked DelayedACKLost ListenOverflows ListenDrops TCPPrequeued TCPDirectCopyFromBacklog TCPDirectCopyFromPrequeue TCPPrequeueDropped TCPHPHits TCPHPHitsToUser TCPPureAcks TCPHPAcks TCPRenoRecovery TCPSackRecovery TCPSACKReneging TCPFACKReorder TCPSACKReorder TCPRenoReorder TCPTSReorder TCPFullUndo TCPPartialUndo TCPDSACKUndo TCPLossUndo TCPLoss TCPLostRetransmit TCPRenoFailures TCPSackFailures TCPLossFailures TCPFastRetrans TCPForwardRetrans TCPSlowStartRetrans TCPTimeouts TCPRenoRecoveryFail TCPSackRecoveryFail TCPSchedulerFailed TCPRcvCollapsed TCPDSACKOldSent TCPDSACKOfoSent TCPDSACKRecv TCPDSACKOfoRecv TCPAbortOnSyn TCPAbortOnData TCPAbortOnClose TCPAbortOnMemory TCPAbortOnTimeout TCPAbortOnLinger TCPAbortFailed TCPMemoryPressures
TcpExt: 0 0 0 23 0 0 0 0 0 0 5 0 0 0 0 0 17865 1 12 0 0 8574 0 9 0 197814 0 458166 187419 0 77 0 0 0 0 0 0 0 0 3 41 0 0 38 0 89 0 42 118 0 13 0 0 39 0 3 0 0 4 1 0 0 0 0 0
# sh ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux FW2 2.4.20-8smp #1 SMP Thu Mar 13 17:45:54 EST 2003 i686 i686 i386 GNU/Linux
Gnu C 18:
Gnu make 3.79.1
util-linux 2.11y
mount 2.11y
modutils 2.4.22
e2fsprogs 1.32
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 2.0.11
Net-tools 1.60
Kbd 1.08
Sh-utils 4.5.3
Modules Loaded tg3 e100 ipt_LOG ipt_limit ipt_REJECT iptable_mangle ipt_state iptable_nat ip_conntrack iptable_filter ip_tables keybdev mousedev hid input usb-ohci usbcore ext3 jbd aacraid sd_mod scsi_mod
# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.40GHz
stepping : 7
cpu MHz : 2392.327
cache size : 512 KB
physical id : 0
siblings : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4771.02
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.40GHz
stepping : 7
cpu MHz : 2392.327
cache size : 512 KB
physical id : 0
siblings : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4784.12
processor : 2
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.40GHz
stepping : 7
cpu MHz : 2392.327
cache size : 512 KB
physical id : 3
siblings : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4784.12
processor : 3
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Xeon(TM) CPU 2.40GHz
stepping : 7
cpu MHz : 2392.327
cache size : 512 KB
physical id : 3
siblings : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
bogomips : 4784.12
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-11-01 22:04 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-11-01 22:04 PROBLEM: IRQ balancing with SMP failed with system load dav
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).