* Fwd: Re: System hanged for a kernel NULL pointer dereference in SLES8-UL1
@ 2003-12-11 10:20 Carlo
0 siblings, 0 replies; only message in thread
From: Carlo @ 2003-12-11 10:20 UTC (permalink / raw)
To: linux-kernel; +Cc: ivan.sassi
I had the same problem with RedHat 7.3 and kernel 2.4.22 with raiserFS. The
system reply to ping bunt isn't accessible from SSH and http neither from
respond to keyboard keypressing.
The dmesg command return:
Dec 4 04:26:02 webeye kernel: Unable to handle kernel NULL pointer
dereference at virtual address 00000004
Dec 4 04:26:02 webeye kernel: printing eip:
Dec 4 04:26:02 webeye kernel: c0127d55
Dec 4 04:26:02 webeye kernel: *pde = 00000000
Dec 4 04:26:02 webeye kernel: Oops: 0002
Dec 4 04:26:02 webeye kernel: CPU: 0
Dec 4 04:26:02 webeye kernel: EIP: 0010:[<c0127d55>] Tainted: P
Dec 4 04:26:02 webeye kernel: EFLAGS: 00010202
Dec 4 04:26:02 webeye kernel: eax: 00000000 ebx: ca4df864 ecx: c0190f30
edx: 00000000
Dec 4 04:26:02 webeye kernel: esi: ca4df834 edi: 00000000 ebp: ca4df844
esp: cff2bf78
Dec 4 04:26:02 webeye kernel: ds: 0018 es: 0018 ss: 0018
Dec 4 04:26:02 webeye kernel: Process kupdated (pid: 6, stackpage=cff2b000)
Dec 4 04:26:02 webeye kernel: Stack: ca4df780 ca4df780 ca4df780 cfe3085c
c0147667 ca4df834 cfe30800 cff2bf9c
Dec 4 04:26:02 webeye kernel: cff2bf9c 00000000 00000000 0066286a
cff2a000 c01159a0 c03b4d60 cff2a000
Dec 4 04:26:02 webeye kernel: cff2a560 cff2a560 cff2a000 c01392d5
c013957c c0385e90 c12ddf98 c0105000
Dec 4 04:26:02 webeye kernel: Call Trace: [<c0147667>] [<c01159a0>]
[<c01392d5>]
[<c013957c>] [<c0105000>]
Dec 4 04:26:02 webeye kernel: [<c0105000>] [<c0107116>] [<c01394a0>]
Dec 4 04:26:02 webeye kernel:
Dec 4 04:26:02 webeye kernel: Code: 89 50 04 89 02 c7 03 00 00 00 00 c7 43
04 00 00
00 00 8b 06
Alle 15:11, venerdì 28 novembre 2003, Ivan Sassi ha scritto:
> System hanged for a kernel NULL pointer dereference in SLES8-UL1
>
> The system (an IBM xSeries 440 4way xeon 2.4 MHz RAM 4 Gb) hanged whit
> the previus error. The machine continued to reply at ping requestes but
> no shell at all was accessible (the SSL connection also don't worked)...
> I restarted the machine (hard power reset) and the system seems to have
> no problem at all... but the server works as TSM server and runs the
> backup of VERY iportant data, so the maximun stability is absolutly
> necesary...
>
> Result of ps -ef:
>
> UID PID PPID C STIME TTY TIME CMD
> root 1 0 0 Nov27 ? 00:00:24 init
> root 2 1 0 Nov27 ? 00:00:00 [migration_CPU0]
> root 3 1 0 Nov27 ? 00:00:00 [migration_CPU1]
> root 4 1 0 Nov27 ? 00:00:00 [migration_CPU2]
> root 5 1 0 Nov27 ? 00:00:00 [migration_CPU3]
> root 6 1 0 Nov27 ? 00:00:08 [keventd]
> root 7 1 0 Nov27 ? 00:01:21 [ksoftirqd_CPU0]
> root 8 1 0 Nov27 ? 00:01:20 [ksoftirqd_CPU1]
> root 9 1 0 Nov27 ? 00:00:46 [ksoftirqd_CPU2]
> root 10 1 0 Nov27 ? 00:00:43 [ksoftirqd_CPU3]
> root 11 1 0 Nov27 ? 00:14:52 [kswapd]
> root 12 1 0 Nov27 ? 00:00:01 [bdflush]
> root 13 1 0 Nov27 ? 00:00:09 [kupdated]
> root 14 1 0 Nov27 ? 00:00:00 [kinoded]
> root 16 1 0 Nov27 ? 00:00:00 [mdrecoveryd]
> root 19 1 0 Nov27 ? 00:00:00 [qla2300_dpc0]
> root 20 1 0 Nov27 ? 00:00:00 [scsi_eh_0]
> root 22 1 0 Nov27 ? 00:00:00 [ahc_dv_0]
> root 23 1 0 Nov27 ? 00:00:00 [ahc_dv_1]
> root 24 1 0 Nov27 ? 00:00:00 [ahc_dv_2]
> root 25 1 0 Nov27 ? 00:00:00 [ahc_dv_3]
> root 26 1 0 Nov27 ? 00:00:00 [scsi_eh_1]
> root 27 1 0 Nov27 ? 00:00:00 [scsi_eh_2]
> root 28 1 0 Nov27 ? 00:00:00 [scsi_eh_3]
> root 29 1 0 Nov27 ? 00:00:00 [scsi_eh_4]
> root 33 1 0 Nov27 ? 00:00:11 [kjournald]
> root 92 1 0 Nov27 ? 00:00:00 [lvm-mpd]
> root 133 1 0 Nov27 ? 00:00:00 [kjournald]
> root 134 1 0 Nov27 ? 00:03:07 [kjournald]
> root 135 1 0 Nov27 ? 00:01:16 [kjournald]
> root 136 1 0 Nov27 ? 00:02:14 [kjournald]
> root 461 1 0 Nov27 ? 00:00:00 /sbin/syslogd
> root 464 1 0 Nov27 ? 00:00:00 /sbin/klogd -c 1 -2
> root 500 1 0 Nov27 ? 00:00:00 [khubd]
> bin 627 1 0 Nov27 ? 00:00:00 /sbin/portmap
> root 670 1 0 Nov27 ? 00:00:00 /usr/sbin/sshd
> root 931 1 0 Nov27 ? 00:00:03 /usr/lib/postfix/master
> at 954 1 0 Nov27 ? 00:00:00 /usr/sbin/atd
> postfix 964 931 0 Nov27 ? 00:00:01 qmgr -l -t fifo -u
> root 971 1 0 Nov27 ? 00:00:02 /usr/sbin/cron
> root 1064 1 0 Nov27 ? 00:00:01 /usr/sbin/nscd
> root 1065 1064 0 Nov27 ? 00:00:00 /usr/sbin/nscd
> root 1066 1065 0 Nov27 ? 00:00:01 /usr/sbin/nscd
> root 1067 1065 0 Nov27 ? 00:00:00 /usr/sbin/nscd
> root 1068 1065 0 Nov27 ? 00:00:00 /usr/sbin/nscd
> root 1069 1065 0 Nov27 ? 00:00:00 /usr/sbin/nscd
> root 1070 1065 0 Nov27 ? 00:00:00 /usr/sbin/nscd
> root 1081 1 0 Nov27 ? 00:00:00 /usr/sbin/inetd
> root 1098 1 0 Nov27 ? 00:00:00
> /opt/IBM_FAStT/jre/bin/i386/native_threads/java -classpath
> /opt/IBM_FAStT/clie
> root 1107 1 0 Nov27 tty3 00:00:00 /sbin/mingetty tty3
> root 1109 1 0 Nov27 tty4 00:00:00 /sbin/mingetty tty4
> root 1111 1 0 Nov27 tty5 00:00:00 /sbin/mingetty tty5
> root 1112 1 0 Nov27 tty6 00:00:00 /sbin/mingetty tty6
> root 1126 1 0 Nov27 ? 00:00:42 /usr/bin/IBMtaped
> root 1141 1098 0 Nov27 ? 00:00:00
> /opt/IBM_FAStT/jre/bin/i386/native_threads/java -classpath
> /opt/IBM_FAStT/clie
> root 1142 1141 0 Nov27 ? 00:00:00
> /opt/IBM_FAStT/jre/bin/i386/native_threads/java -classpath
> /opt/IBM_FAStT/clie
> root 1143 1141 0 Nov27 ? 00:00:00
> /opt/IBM_FAStT/jre/bin/i386/native_threads/java -classpath
> /opt/IBM_FAStT/clie
> root 1144 1141 0 Nov27 ? 00:00:00
> /opt/IBM_FAStT/jre/bin/i386/native_threads/java -classpath
> /opt/IBM_FAStT/clie
> root 1145 1141 0 Nov27 ? 00:00:20
> /opt/IBM_FAStT/jre/bin/i386/native_threads/java -classpath
> /opt/IBM_FAStT/clie
> root 1146 1141 0 Nov27 ? 00:00:00
> /opt/IBM_FAStT/jre/bin/i386/native_threads/java -classpath
> /opt/IBM_FAStT/clie
> root 1147 1141 0 Nov27 ? 00:00:00
> /opt/IBM_FAStT/jre/bin/i386/native_threads/java -classpath
> /opt/IBM_FAStT/clie
> root 1148 1141 0 Nov27 ? 00:00:00
> /opt/IBM_FAStT/jre/bin/i386/native_threads/java -classpath
> /opt/IBM_FAStT/clie
> root 1149 1141 0 Nov27 ? 00:00:00
> /opt/IBM_FAStT/jre/bin/i386/native_threads/java -classpath
> /opt/IBM_FAStT/clie
> root 1150 1141 0 Nov27 ? 00:00:00
> /opt/IBM_FAStT/jre/bin/i386/native_threads/java -classpath
> /opt/IBM_FAStT/clie
> root 1151 1141 0 Nov27 ? 00:00:00
> /opt/IBM_FAStT/jre/bin/i386/native_threads/java -classpath
> /opt/IBM_FAStT/clie
> root 1152 1141 0 Nov27 ? 00:00:00
> /opt/IBM_FAStT/jre/bin/i386/native_threads/java -classpath
> /opt/IBM_FAStT/clie
> root 1365 1 0 Nov27 ? 00:00:06 ./dsmserv
> root 1366 1365 0 Nov27 ? 00:00:01 ./dsmserv
> root 1368 1366 0 Nov27 ? 00:01:37 ./dsmserv
> root 1369 1366 0 Nov27 ? 00:01:15 ./dsmserv
> root 1370 1366 0 Nov27 ? 00:01:40 ./dsmserv
> root 1371 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1372 1366 0 Nov27 ? 00:01:57 ./dsmserv
> root 1373 1366 0 Nov27 ? 00:00:06 ./dsmserv
> root 1374 1366 0 Nov27 ? 00:00:06 ./dsmserv
> root 1375 1366 0 Nov27 ? 00:00:31 ./dsmserv
> root 1376 1366 0 Nov27 ? 00:00:01 ./dsmserv
> root 1377 1366 0 Nov27 ? 00:00:02 ./dsmserv
> root 1387 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1388 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1390 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1391 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1392 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1394 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1397 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1398 1366 0 Nov27 ? 00:02:22 ./dsmserv
> root 1401 1366 0 Nov27 ? 00:09:33 ./dsmserv
> root 1404 1366 0 Nov27 ? 00:09:13 ./dsmserv
> root 1406 1366 0 Nov27 ? 00:02:35 ./dsmserv
> root 1409 1366 0 Nov27 ? 00:02:21 ./dsmserv
> root 1410 1366 0 Nov27 ? 00:02:22 ./dsmserv
> root 1413 1366 0 Nov27 ? 00:02:15 ./dsmserv
> root 1415 1366 0 Nov27 ? 00:04:25 ./dsmserv
> root 1417 1366 0 Nov27 ? 00:02:34 ./dsmserv
> root 1420 1366 0 Nov27 ? 00:14:07 ./dsmserv
> root 1423 1366 0 Nov27 ? 00:04:47 ./dsmserv
> root 1425 1366 0 Nov27 ? 00:05:07 ./dsmserv
> root 1427 1366 0 Nov27 ? 00:03:20 ./dsmserv
> root 1429 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1430 1366 0 Nov27 ? 00:05:06 ./dsmserv
> root 1431 1366 0 Nov27 ? 00:06:34 ./dsmserv
> root 1432 1366 0 Nov27 ? 00:05:04 ./dsmserv
> root 1433 1366 0 Nov27 ? 00:00:46 ./dsmserv
> root 1434 1366 0 Nov27 ? 00:03:01 ./dsmserv
> root 1435 1366 0 Nov27 ? 00:02:06 ./dsmserv
> root 1436 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1437 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1438 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1439 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1442 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1443 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1444 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1445 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1446 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1447 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1449 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1451 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1452 1366 0 Nov27 ? 00:00:00 ./dsmserv
> root 1488 1 0 Nov27 tty2 00:00:00 /sbin/mingetty tty2
> root 1512 1 0 Nov27 tty1 00:00:00 /sbin/mingetty --noclear
> tty1
> root 3522 1366 0 Nov27 ? 00:00:00 ./dsmserv
> postfix 8159 931 0 13:45 ? 00:00:00 pickup -l -t fifo -u
> root 8248 670 0 14:28 ? 00:00:00 /usr/sbin/sshd
> root 8250 8248 0 14:28 pts/0 00:00:00 -bash
> root 8400 8250 0 14:54 pts/0 00:00:00 ps -ef
>
> Result of cat /proc/version:
>
> Linux version 2.4.19-64GB-SMP (root@SMP_X86.suse.de) (gcc version 3.2.2)
> #1 SMP Mon Aug 4 23:48:22 UTC 2003
>
> Output of Oops.. message:
>
> Nov 26 22:31:55 SSILXTSM kernel: Unable to handle kernel NULL pointer
> dereference at virtual address 00000004
> Nov 26 22:31:55 SSILXTSM kernel: printing eip:
> Nov 26 22:31:55 SSILXTSM kernel: c015633b
> Nov 26 22:31:55 SSILXTSM kernel: *pde = 0b61a001
> Nov 26 22:31:55 SSILXTSM kernel: Oops: 0002 2.4.19-64GB-SMP #1 SMP Mon
> Aug 4 23:48:22 UTC 2003
> Nov 26 22:31:55 SSILXTSM kernel: CPU: 1
> Nov 26 22:31:55 SSILXTSM kernel: EIP: 0010:[sys_close+27/128] Not
> tainted
> Nov 26 22:31:55 SSILXTSM kernel: EIP: 0010:[<c015633b>] Not tainted
> Nov 26 22:31:55 SSILXTSM kernel: EFLAGS: 00010286
> Nov 26 22:31:55 SSILXTSM kernel: eax: 00000004 ebx: d75fe000 ecx:
> 00000023 edx: 00000000
> Nov 26 22:31:55 SSILXTSM kernel: esi: 0000005c edi: 00000000 ebp:
> b79fb454 esp: d75fffb4
> Nov 26 22:31:55 SSILXTSM kernel: ds: 0018 es: 0018 ss: 0018
> Nov 26 22:31:55 SSILXTSM kernel: Process dsmserv (pid: 6653,
> stackpage=d75ff000)
> Nov 26 22:31:55 SSILXTSM kernel: Stack: b79ffc00 00000000 d75fe000
> c01095ef 00000023 00000000 4006fac0 0000005c
> Nov 26 22:31:55 SSILXTSM kernel: 00000000 b79fb454 00000006
> 0000002b 0000002b 00000006 40132a4d 00000023
> Nov 26 22:31:55 SSILXTSM kernel: 00000246 b79fb438 0000002b
> Nov 26 22:31:55 SSILXTSM kernel: Call Trace: [system_call+51/56]
> Nov 26 22:31:55 SSILXTSM kernel: Call Trace: [<c01095ef>]
> Nov 26 22:31:55 SSILXTSM kernel: Code: f0 81 28 00 00 00 01 0f 85 04 07
> 00 00 3b 4a 08 73 43 8b 42
>
> The are no apparent trigger to the error status...
>
> The distro is a SLES8 powered by UnitedLinux 1.0... the only upgrade was
> to the kernel k_smp-2.4.19-340...
>
> Result of sh /usr/src/linux/scripts/ver_linux:
>
> Linux SSILXTSM 2.4.19-64GB-SMP #1 SMP Mon Aug 4 23:48:22 UTC 2003 i686
> unknown
>
> Gnu C gcc (GCC) 3.2 Copyright (C) 2002 Free Software
> Foundation, Inc. This is free software; see the source for copying
> conditions. There is NO warranty; not even for MERCHANTABILITY or
> FITNESS FOR A PARTICULAR PURPOSE.
> Gnu make 3.79.1
> util-linux 2.11u
> mount 2.11u
> modutils 2.4.19
> e2fsprogs 1.28
> PPP 2.4.1
> isdn4k-utils 3.2p1
> Linux C Library x 1 root root 1312470 Oct 22 2002
> /lib/libc.so.6
> Dynamic linker (ldd) 2.2.5
> Linux C++ Library 5.0.0
> Procps 2.0.7
> Net-tools 1.60
> Kbd 1.06
> Sh-utils 2.0
> Modules Loaded ide-cd isa-pnp ipv6 st sr_mod cdrom sg joydev
> evdev input usb-uhci usbcore bcm5700 lvm-mod ext3 jbd IBMtape aic7xxx
> qla2300
>
> Result of cat /proc/cpuinfo:
>
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Intel(R) Xeon(TM) CPU 2.40GHz
> stepping : 7
> cpu MHz : 2395.205
> cache size : 512 KB
> physical id : 0
> siblings : 1
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
> bogomips : 198.65
>
> processor : 1
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Intel(R) Xeon(TM) CPU 2.40GHz
> stepping : 7
> cpu MHz : 2395.205
> cache size : 512 KB
> physical id : 0
> siblings : 1
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
> bogomips : 199.47
>
> processor : 2
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Intel(R) Xeon(TM) CPU 2.40GHz
> stepping : 7
> cpu MHz : 2395.205
> cache size : 512 KB
> physical id : 0
> siblings : 1
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
> bogomips : 199.47
>
> processor : 3
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Intel(R) Xeon(TM) CPU 2.40GHz
> stepping : 7
> cpu MHz : 2395.205
> cache size : 512 KB
> physical id : 0
> siblings : 1
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
> bogomips : 199.47
>
> Result of cat /proc/modules:
>
> ide-cd 30564 0 (autoclean)
> isa-pnp 32512 0 (unused)
> ipv6 268124 -1 (autoclean)
> st 29324 0 (autoclean)
> sr_mod 14520 0 (autoclean) (unused)
> cdrom 29056 0 (autoclean) [ide-cd sr_mod]
> sg 30368 0 (autoclean)
> joydev 6112 0 (unused)
> evdev 4800 0 (unused)
> input 3488 0 [joydev evdev]
> usb-uhci 24460 0 (unused)
> usbcore 64960 1 [usb-uhci]
> bcm5700 86280 2
> lvm-mod 68256 0 (autoclean)
> ext3 89160 5
> jbd 54020 5 [ext3]
> IBMtape 167141 1
> aic7xxx 179108 0
> qla2300 236096 6
>
> Result of cat /proc/ioports:
>
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-007f : rtc
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 01f0-01f7 : ide0
> 03c0-03df : vesafb
> 03f6-03f6 : ide0
> 0440-044f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> 0700-070f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
> 0700-0707 : ide0
> 0708-070f : ide1
> 0cf8-0cff : PCI conf1
> 1800-187f : PCI device 1014:010f (IBM)
> 1880-189f : VIA Technologies, Inc. USB
> 1880-189f : usb-uhci
> 18a0-18bf : VIA Technologies, Inc. USB (#2)
> 18a0-18bf : usb-uhci
> 3000-30ff : QLogic Corp. QLA2312 Fibre Channel Adapter
> 3000-30fe : qla2300
> 3800-38ff : Adaptec AHA-3960D / AIC-7899A U160/m
> 3800-38ff : aic7xxx
> 3900-39ff : Adaptec AHA-3960D / AIC-7899A U160/m (#2)
> 3900-39ff : aic7xxx
> 3a00-3aff : Adaptec AHA-3960D / AIC-7899A U160/m (#3)
> 3a00-3aff : aic7xxx
> 3b00-3bff : Adaptec AHA-3960D / AIC-7899A U160/m (#4)
> 3b00-3bff : aic7xxx
>
> Result of cat /proc/iomem:
>
> 00000000-0009d7ff : System RAM
> 0009d800-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000c8000-000c97ff : Extension ROM
> 000c9800-000cafff : Extension ROM
> 000cb000-000cd9ff : Extension ROM
> 000f0000-000fffff : System ROM
> 00100000-dffb6fbf : System RAM
> 00100000-002e3f65 : Kernel code
> 002e3f66-0037d39f : Kernel data
> dffb6fc0-dffbf7ff : ACPI Tables
> dffbf800-dfffffff : reserved
> e0000000-e7ffffff : S3 Inc. Savage 4
> e0000000-e07fffff : vesafb
> f0410000-f041ffff : PCI device 14e4:1648 (Broadcom Corporation)
> f0410000-f041ffff : bcm5700
> f0420000-f042ffff : PCI device 14e4:1648 (Broadcom Corporation)
> f0420000-f042ffff : bcm5700
> f0430000-f043ffff : PCI device 14e4:1648 (Broadcom Corporation)
> f0430000-f043ffff : bcm5700
> f0440000-f044ffff : PCI device 14e4:1648 (Broadcom Corporation)
> f0440000-f044ffff : bcm5700
> f0800000-f09fffff : PCI device 1014:010f (IBM)
> f0a00000-f0a7ffff : S3 Inc. Savage 4
> f0e00000-f0e0ffff : Broadcom Corporation NetXtreme BCM5700 Gigabit Ethernet
> f0e00000-f0e0ffff : bcm5700
> fb620000-fb620fff : QLogic Corp. QLA2312 Fibre Channel Adapter
> fb720000-fb720fff : Adaptec AHA-3960D / AIC-7899A U160/m
> fb720000-fb720fff : aic7xxx
> fb721000-fb721fff : Adaptec AHA-3960D / AIC-7899A U160/m (#2)
> fb721000-fb721fff : aic7xxx
> fb722000-fb722fff : Adaptec AHA-3960D / AIC-7899A U160/m (#3)
> fb722000-fb722fff : aic7xxx
> fb723000-fb723fff : Adaptec AHA-3960D / AIC-7899A U160/m (#4)
> fb723000-fb723fff : aic7xxx
> fec00000-ffffffff : reserved
>
> Result of lspci -vvv:
>
> 00:00.0 Host bridge: IBM: Unknown device 0302 (rev 03)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 240
> Capabilities: [60] PCI-X non-bridge device.
> Command: DPERE- ERO- RBC=0 OST=1
> Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
> DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
> 00:03.0 VGA compatible controller: S3 Inc. Savage 4 (rev 06) (prog-if 00
> [VGA])
> Subsystem: IBM: Unknown device 01c5
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Latency: 248 (1000ns min, 63750ns max), cache line size 10
> Interrupt: pin A routed to IRQ 39
> Region 0: Memory at f0a00000 (32-bit, non-prefetchable)
> [size=512K] Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
> Expansion ROM at <unassigned> [disabled] [size=64K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:04.0 Bridge: IBM: Unknown device 010f
> Subsystem: IBM: Unknown device 0113
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Latency: 247 (1000ns min, 2000ns max), cache line size 10
> Interrupt: pin A routed to IRQ 16
> BIST result: 00
> Region 0: Memory at f0800000 (64-bit, non-prefetchable) [size=2M]
> Region 2: I/O ports at 1800 [size=128]
> Expansion ROM at <unassigned> [disabled] [size=2M]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:05.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
> (rev 40)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Latency: 0
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:05.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master
> IDE (rev 06) (prog-if 8a [Master SecP PriP])
> Subsystem: VIA Technologies, Inc. (Wrong ID): Unknown device 1234
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Latency: 240
> Region 4: I/O ports at 0700 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:05.2 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00
> [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Latency: 240, cache line size 10
> Interrupt: pin D routed to IRQ 18
> Region 4: I/O ports at 1880 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:05.3 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00
> [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Latency: 240, cache line size 10
> Interrupt: pin D routed to IRQ 18
> Region 4: I/O ports at 18a0 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:05.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
> Subsystem: VIA Technologies, Inc. (Wrong ID): Unknown device 1234
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Capabilities: [68] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 01:00.0 Host bridge: IBM: Unknown device 0302 (rev 03)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 240
> Capabilities: [60] PCI-X non-bridge device.
> Command: DPERE- ERO- RBC=0 OST=1
> Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
> DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
> 01:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5700
> Gigabit Ethernet (rev 12)
> Subsystem: IBM Broadcom Vigil B5700 1000BaseTX
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Latency: 240 (16000ns min), cache line size 10
> Interrupt: pin A routed to IRQ 42
> Region 0: Memory at f0e00000 (64-bit, non-prefetchable) [size=64K]
> Capabilities: [40] PCI-X non-bridge device.
> Command: DPERE- ERO+ RBC=3 OST=6
> Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
> DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabilities: [48]
> Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data
> Capabilities: [58] Message Signalled Interrupts: 64bit+
> Queue=0/3 Enable-
> Address: 94aad0631e01a210 Data: 3a3b
>
> 02:00.0 Host bridge: IBM: Unknown device 0302 (rev 03)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 240
> Capabilities: [60] PCI-X non-bridge device.
> Command: DPERE- ERO- RBC=0 OST=1
> Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
> DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
> 02:02.0 Ethernet controller: Broadcom Corporation: Unknown device 1648
> (rev 03)
> Subsystem: Broadcom Corporation: Unknown device 1648
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Latency: 240 (16000ns min), cache line size 10
> Interrupt: pin A routed to IRQ 55
> Region 0: Memory at f0410000 (64-bit, non-prefetchable) [size=64K]
> Region 2: Memory at f0420000 (64-bit, non-prefetchable) [size=64K]
> Expansion ROM at <unassigned> [disabled] [size=64K]
> Capabilities: [40] PCI-X non-bridge device.
> Command: DPERE- ERO- RBC=2 OST=0
> Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
> DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabilities: [48]
> Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data
> Capabilities: [58] Message Signalled Interrupts: 64bit+
> Queue=0/3 Enable-
> Address: 2804801110811200 Data: 2260
>
> 02:02.1 Ethernet controller: Broadcom Corporation: Unknown device 1648
> (rev 03)
> Subsystem: Broadcom Corporation: Unknown device 1648
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Latency: 240 (16000ns min), cache line size 10
> Interrupt: pin B routed to IRQ 56
> Region 0: Memory at f0430000 (64-bit, non-prefetchable) [size=64K]
> Region 2: Memory at f0440000 (64-bit, non-prefetchable) [size=64K]
> Capabilities: [40] PCI-X non-bridge device.
> Command: DPERE- ERO- RBC=2 OST=0
> Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
> DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabilities: [48]
> Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data
> Capabilities: [58] Message Signalled Interrupts: 64bit+
> Queue=0/3 Enable-
> Address: 0004205020500000 Data: 0c02
>
> 05:00.0 Host bridge: IBM: Unknown device 0302 (rev 03)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 240
> Capabilities: [60] PCI-X non-bridge device.
> Command: DPERE- ERO- RBC=0 OST=1
> Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
> DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
> 05:04.0 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 02)
> Subsystem: QLogic Corp.: Unknown device 0100
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Latency: 240 (16000ns min), cache line size 10
> Interrupt: pin A routed to IRQ 71
> Region 0: I/O ports at 3000 [size=256]
> Region 1: Memory at fb620000 (64-bit, non-prefetchable) [size=4K]
> Expansion ROM at <unassigned> [disabled] [size=128K]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [4c] PCI-X non-bridge device.
> Command: DPERE- ERO+ RBC=3 OST=6
> Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
> DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM- Capabilities: [54]
> Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [64] #06 [0080]
>
> 07:00.0 Host bridge: IBM: Unknown device 0302 (rev 03)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 240
> Capabilities: [60] PCI-X non-bridge device.
> Command: DPERE- ERO- RBC=0 OST=1
> Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
> DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
> 09:00.0 Host bridge: IBM: Unknown device 0302 (rev 03)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr+ Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 240
> Capabilities: [60] PCI-X non-bridge device.
> Command: DPERE- ERO- RBC=0 OST=1
> Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-,
> DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
> 09:01.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m
> (rev 01)
> Subsystem: Adaptec AHA-3960D U160/m
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Latency: 240 (10000ns min, 6250ns max), cache line size 10
> Interrupt: pin A routed to IRQ 59
> BIST result: 00
> Region 0: I/O ports at 3800 [disabled] [size=256]
> Region 1: Memory at fb720000 (64-bit, non-prefetchable) [size=4K]
> Expansion ROM at <unassigned> [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 09:01.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m
> (rev 01)
> Subsystem: Adaptec AHA-3960D U160/m
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Latency: 240 (10000ns min, 6250ns max), cache line size 10
> Interrupt: pin B routed to IRQ 60
> BIST result: 00
> Region 0: I/O ports at 3900 [disabled] [size=256]
> Region 1: Memory at fb721000 (64-bit, non-prefetchable) [size=4K]
> Expansion ROM at <unassigned> [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 09:02.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m
> (rev 01)
> Subsystem: Adaptec AHA-3960D U160/m
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Latency: 240 (10000ns min, 6250ns max), cache line size 10
> Interrupt: pin A routed to IRQ 63
> BIST result: 00
> Region 0: I/O ports at 3a00 [disabled] [size=256]
> Region 1: Memory at fb722000 (64-bit, non-prefetchable) [size=4K]
> Expansion ROM at <unassigned> [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 09:02.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m
> (rev 01)
> Subsystem: Adaptec AHA-3960D U160/m
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
> Latency: 240 (10000ns min, 6250ns max), cache line size 10
> Interrupt: pin B routed to IRQ 64
> BIST result: 00
> Region 0: I/O ports at 3b00 [disabled] [size=256]
> Region 1: Memory at fb723000 (64-bit, non-prefetchable) [size=4K]
> Expansion ROM at <unassigned> [disabled] [size=128K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> Result of cat /proc/scsi/scsi:
>
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: IBM Model: 1742 Rev: 0520
> Type: Direct-Access ANSI SCSI revision: 03
> Host: scsi0 Channel: 00 Id: 00 Lun: 01
> Vendor: IBM Model: 1742 Rev: 0520
> Type: Direct-Access ANSI SCSI revision: 03
> Host: scsi0 Channel: 00 Id: 00 Lun: 02
> Vendor: IBM Model: 1742 Rev: 0520
> Type: Direct-Access ANSI SCSI revision: 03
> Host: scsi0 Channel: 00 Id: 00 Lun: 03
> Vendor: IBM Model: 1742 Rev: 0520
> Type: Direct-Access ANSI SCSI revision: 03
> Host: scsi1 Channel: 00 Id: 05 Lun: 00
> Vendor: IBM Model: ULT3580-TD2 Rev: 3A30
> Type: Sequential-Access ANSI SCSI revision: 03
> Host: scsi2 Channel: 00 Id: 03 Lun: 00
> Vendor: IBM Model: ULT3580-TD2 Rev: 3A30
> Type: Sequential-Access ANSI SCSI revision: 03
> Host: scsi2 Channel: 00 Id: 04 Lun: 00
> Vendor: IBM Model: ULT3580-TD2 Rev: 3A30
> Type: Sequential-Access ANSI SCSI revision: 03
> Host: scsi3 Channel: 00 Id: 00 Lun: 00
> Vendor: IBM Model: ULT3580-TD2 Rev: 3A30
> Type: Sequential-Access ANSI SCSI revision: 03
> Host: scsi3 Channel: 00 Id: 00 Lun: 01
> Vendor: IBM Model: 03584L32 Rev: 3480
> Type: Medium Changer ANSI SCSI revision: 03
> Host: scsi3 Channel: 00 Id: 01 Lun: 00
> Vendor: IBM Model: ULT3580-TD2 Rev: 3A30
> Type: Sequential-Access ANSI SCSI revision: 03
> Host: scsi4 Channel: 00 Id: 02 Lun: 00
> Vendor: IBM Model: ULT3580-TD2 Rev: 3A30
> Type: Sequential-Access ANSI SCSI revision: 03
-------------------------------------------------------
-------------------------------------------------------
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-12-11 10:21 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-12-11 10:20 Fwd: Re: System hanged for a kernel NULL pointer dereference in SLES8-UL1 Carlo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).