* [BUG 2.6.2-rc2-mm1] Maybe in new sisfb driver.
@ 2004-02-05 3:02 Meszaros Andras
0 siblings, 0 replies; only message in thread
From: Meszaros Andras @ 2004-02-05 3:02 UTC (permalink / raw)
To: akpm, linux-kernel, thomas
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 19052 bytes --]
To: linux-kernel@vger.kernel.org,thomas@winischhofer.net,akpm@osdl.org
Subject: [BUG 2.6.2-rc2-mm1] Maybe in new sisfb driver.
Hi!
Feb 5 06:34:04 opata kernel: ------------[ cut here ]------------
Feb 5 06:34:04 opata kernel: kernel BUG at include/linux/list.h:148!
Feb 5 06:34:04 opata kernel: invalid operand: 0000 [#1]
Feb 5 06:34:04 opata kernel: PREEMPT
Feb 5 06:34:04 opata kernel: CPU: 0
Feb 5 06:34:04 opata kernel: EIP: 0060:[generic_forget_inode+369/382] Not tainted VLI
Feb 5 06:34:04 opata kernel: EFLAGS: 00010213
Feb 5 06:34:04 opata kernel: EIP is at generic_forget_inode+0x171/0x17e
Feb 5 06:34:04 opata kernel: eax: c137360c ebx: c151240c ecx: c0006914 edx: c1512414
Feb 5 06:34:04 opata kernel: esi: c151240c edi: c1390400 ebp: 00000068 esp: c13e3e4c
Feb 5 06:34:04 opata kernel: ds: 007b es: 007b ss: 0068
Feb 5 06:34:04 opata kernel: Process kswapd0 (pid: 7, threadinfo=c13e2000 task=c13e7310)
Feb 5 06:34:04 opata kernel: Stack: c016dfbb cf06a38c c1519a80 c151240c c151240c c13e2000 c016f003 c151240c
Feb 5 06:34:04 opata kernel: c039d740 c1513980 c016c4fe c151240c c13e3e78 00000080 c13e2000 00000246
Feb 5 06:34:04 opata kernel: cf7eeb20 c016c9ff 00000080 c0144e0a 00000080 000000d0 000088da 0204b270
Feb 5 06:34:04 opata kernel: Call Trace:
Feb 5 06:34:04 opata kernel: [dispose_list+90/199] dispose_list+0x5a/0xc7
Feb 5 06:34:04 opata kernel: [iput+98/124] iput+0x62/0x7c
Feb 5 06:34:04 opata kernel: [prune_dcache+369/489] prune_dcache+0x171/0x1e9
Feb 5 06:34:04 opata kernel: [shrink_dcache_memory+35/37] shrink_dcache_memory+0x23/0x25
Feb 5 06:34:04 opata kernel: [shrink_slab+283/350] shrink_slab+0x11b/0x15e
Feb 5 06:34:04 opata kernel: [balance_pgdat+510/542] balance_pgdat+0x1fe/0x21e
Feb 5 06:34:04 opata kernel: [kswapd+274/290] kswapd+0x112/0x122
Feb 5 06:34:04 opata kernel: [autoremove_wake_function+0/79] autoremove_wake_function+0x0/0x4f
Feb 5 06:34:04 opata kernel: [ret_from_fork+6/20] ret_from_fork+0x6/0x14
Feb 5 06:34:04 opata kernel: [autoremove_wake_function+0/79] autoremove_wake_function+0x0/0x4f
Feb 5 06:34:04 opata kernel: [kswapd+0/290] kswapd+0x0/0x122
Feb 5 06:34:04 opata kernel: [kernel_thread_helper+5/11] kernel_thread_helper+0x5/0xb
Feb 5 06:34:04 opata kernel:
Feb 5 06:34:04 opata kernel: Code: 00 00 00 89 04 24 e8 ea 56 fd ff eb c9 e8 1b fa fa ff eb b8 e8 14 fa fa ff e9 1b ff ff ff 0f 0b 95 00 dd 93 2b c0 e9 cd fe ff ff <0f> 0b 94 00 dd 93 2b c0 e9 b4 fe ff ff 8b 44 24 04 8b 50 2c 85
Feb 5 06:34:04 opata kernel: <6>note: kswapd0[7] exited with preempt_count 1
Feb 5 06:34:18 opata init: Id "1" respawning too fast: disabled for 5 minutes
Feb 5 06:34:52 opata kernel: SysRq : Emergency Sync
Feb 5 06:34:52 opata kernel: Emergency Sync complete
Feb 5 06:35:02 opata kernel: SysRq : Emergency Sync
Feb 5 06:35:02 opata kernel: Emergency Sync complete
Feb 5 06:35:05 opata init: Id "5" respawning too fast: disabled for 5 minutes
Feb 5 06:35:11 opata kernel: SysRq : HELP : loglevel0-8 reBoot tErm kIll saK showMem powerOff showPc unRaw Sync showTasks Unmount
Feb 5 06:35:12 opata kernel: SysRq : Emergency Sync
Feb 5 06:35:12 opata kernel: Emergency Sync complete
Feb 5 06:35:14 opata kernel: SysRq : Emergency Remount R/O
Feb 5 06:35:14 opata kernel: ------------[ cut here ]------------
Feb 5 06:35:14 opata kernel: kernel BUG at include/linux/list.h:149!
Feb 5 06:35:14 opata kernel: invalid operand: 0000 [#2]
Feb 5 06:35:14 opata kernel: PREEMPT
Feb 5 06:35:14 opata kernel: CPU: 0
Feb 5 06:35:14 opata kernel: EIP: 0060:[shrink_dcache_sb+550/570] Not tainted VLI
Feb 5 06:35:14 opata kernel: EFLAGS: 00010217
Feb 5 06:35:14 opata kernel: EIP is at shrink_dcache_sb+0x226/0x23a
Feb 5 06:35:14 opata kernel: eax: c0049b8c ebx: c0049b8c ecx: c7ff708c edx: c2fe7a8c
Feb 5 06:35:14 opata kernel: esi: c1390400 edi: c13e8000 ebp: ffffe000 esp: c13e9f58
Feb 5 06:35:14 opata kernel: ds: 007b es: 007b ss: 0068
Feb 5 06:35:14 opata kernel: Process pdflush (pid: 5, threadinfo=c13e8000 task=c127a080)
Feb 5 06:35:14 opata kernel: Stack: c127a0a0 c127df48 c1390400 c1390400 c1390400 c13e8000 ffffe000 c015c82c
Feb 5 06:35:14 opata kernel: c1390400 c127ace0 d6090fc0 c1390400 c13e8000 c015c96c c1390400 00000001
Feb 5 06:35:14 opata kernel: 00000000 00000001 c13e8000 c13e9fdc c13e8000 c13e9fd0 c0140ecc 00000000
Feb 5 06:35:14 opata kernel: Call Trace:
Feb 5 06:35:14 opata kernel: [do_remount_sb+53/216] do_remount_sb+0x35/0xd8
Feb 5 06:35:14 opata kernel: [do_emergency_remount+157/291] do_emergency_remount+0x9d/0x123
Feb 5 06:35:14 opata kernel: [__pdflush+252/477] __pdflush+0xfc/0x1dd
Feb 5 06:35:14 opata kernel: [pdflush+0/19] pdflush+0x0/0x13
Feb 5 06:35:14 opata kernel: [pdflush+15/19] pdflush+0xf/0x13
Feb 5 06:35:14 opata kernel: [do_emergency_remount+0/291] do_emergency_remount+0x0/0x123
Feb 5 06:35:14 opata kernel: [kernel_thread_helper+0/11] kernel_thread_helper+0x0/0xb
Feb 5 06:35:14 opata kernel: [kernel_thread_helper+5/11] kernel_thread_helper+0x5/0xb
Feb 5 06:35:14 opata kernel:
Feb 5 06:35:14 opata kernel: Code: 48 04 75 27 89 02 89 50 04 c7 01 00 01 10 00 a1 b0 ce 2e c0 89 48 04 89 01 c7 41 04 b0 ce 2e c0 89 0d b0 ce 2e c0 e9 13 fe ff ff <0f> 0b 95 00 dd 93 2b c0 eb cf 0f 0b 94 00 dd 93 2b c0 eb be 57
Feb 5 06:35:14 opata kernel: <6>note: pdflush[5] exited with preempt_count 2
Feb 5 06:35:17 opata kernel: SysRq : Emergency Sync
Feb 5 06:35:17 opata kernel: Emergency Sync complete
Feb 5 06:35:19 opata kernel: SysRq : Emergency Remount R/O
Feb 5 06:35:19 opata kernel: ------------[ cut here ]------------
Feb 5 06:35:19 opata kernel: kernel BUG at include/linux/list.h:149!
Feb 5 06:35:19 opata kernel: invalid operand: 0000 [#3]
Feb 5 06:35:19 opata kernel: PREEMPT
Feb 5 06:35:19 opata kernel: CPU: 0
Feb 5 06:35:19 opata kernel: EIP: 0060:[shrink_dcache_sb+550/570] Not tainted VLI
Feb 5 06:35:19 opata kernel: EFLAGS: 00010217
Feb 5 06:35:19 opata kernel: EIP is at shrink_dcache_sb+0x226/0x23a
Feb 5 06:35:19 opata kernel: eax: c0049b8c ebx: c0049b8c ecx: c7ff708c edx: c2fe7a8c
Feb 5 06:35:19 opata kernel: esi: c1390400 edi: c13e4000 ebp: ffffe000 esp: c13e5f58
Feb 5 06:35:19 opata kernel: ds: 007b es: 007b ss: 0068
Feb 5 06:35:19 opata kernel: Process pdflush (pid: 6, threadinfo=c13e4000 task=c13e7940)
Feb 5 06:35:19 opata kernel: Stack: c13e7960 c127df48 c1390400 c1390400 c1390400 c13e4000 ffffe000 c015c82c
Feb 5 06:35:19 opata kernel: c1390400 c127ace0 fdc34e17 c1390400 c13e4000 c015c96c c1390400 00000001
Feb 5 06:35:19 opata kernel: 00000000 00000001 c13e4000 c13e5fdc c13e4000 c13e5fd0 c0140ecc 00000000
Feb 5 06:35:19 opata kernel: Call Trace:
Feb 5 06:35:19 opata kernel: [do_remount_sb+53/216] do_remount_sb+0x35/0xd8
Feb 5 06:35:19 opata kernel: [do_emergency_remount+157/291] do_emergency_remount+0x9d/0x123
Feb 5 06:35:19 opata kernel: [__pdflush+252/477] __pdflush+0xfc/0x1dd
Feb 5 06:35:19 opata kernel: [pdflush+0/19] pdflush+0x0/0x13
Feb 5 06:35:19 opata kernel: [pdflush+15/19] pdflush+0xf/0x13
Feb 5 06:35:19 opata kernel: [do_emergency_remount+0/291] do_emergency_remount+0x0/0x123
Feb 5 06:35:19 opata kernel: [kernel_thread_helper+0/11] kernel_thread_helper+0x0/0xb
Feb 5 06:35:19 opata kernel: [kernel_thread_helper+5/11] kernel_thread_helper+0x5/0xb
Feb 5 06:35:19 opata kernel:
Feb 5 06:35:19 opata kernel: Code: 48 04 75 27 89 02 89 50 04 c7 01 00 01 10 00 a1 b0 ce 2e c0 89 48 04 89 01 c7 41 04 b0 ce 2e c0 89 0d b0 ce 2e c0 e9 13 fe ff ff <0f> 0b 95 00 dd 93 2b c0 eb cf 0f 0b 94 00 dd 93 2b c0 eb be 57
Feb 5 06:35:19 opata kernel: <6>note: pdflush[6] exited with preempt_count 2
Feb 5 06:35:20 opata kernel: SysRq : Emergency Remount R/O
Before this:
1. I play some avi in console whith this:
mplayer -vo fbdev2 beach.avi
http://www.mplayerhq.hu
andrej@opata:sis$ mplayer -v
MPlayer 1.0pre3-3.3.1 (C) 2000-2003 MPlayer Team
CPU: Intel Pentium 4/Xeon/Celeron Northwood 2006 MHz (Family: 8, Stepping: 9)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2
2. and see some pictures(jpg), whith fbi
andrej@opata:sis$ fbi --version
fbi version 1.26 (c) 1999-2001 Gerd Knorr; compiled on Feb 7 2003.
3. _After_ 1-2 second has a crash. Only SysRq working.
In my laptop have debian/sarge. Installed 2003.09.22 and not upgraded. All program officinal debian version, except the kernel, and mplayer.
andrej@opata:sis$ uname -a
Linux opata 2.6.2-rc2-mm1 #37 Thu Jan 29 18:33:52 CIT 2004 i686 GNU/Linux
opata:~# grep -A1 2.6.2-rc2-mm1 /etc/lilo.conf
image=/boot/vmlinuz-2.6.2-rc2-mm1
append="devfs=mount max_scsi_luns=2 video=sisfb:1024x768x32-60"
label=2.6.2-rc2-mm1
andrej@opata:bali$ grep "ACPI\|SIS" /boot/config-2.6.2-rc2-mm1
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_RELAXED_AML=y
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_SIS900=m
# CONFIG_SIS190 is not set
CONFIG_SERIAL_8250_ACPI=y
CONFIG_AGP_SIS=m
CONFIG_DRM_SIS=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
All acpi modul "insmod"-ed.
andrej@opata:bali$ lspci -vvv
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 650 Host (rev 11)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: cfc00000-dfcfffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 0c00 [size=32]
00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller (prog-if 10 [OHCI])
Subsystem: Uniwill Computer Corp: Unknown device 5300
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 3000ns max)
Interrupt: pin B routed to IRQ 5
Region 0: Memory at dfffb000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at dffc0000 [disabled] [size=128K]
Capabilities: [64] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
Subsystem: Uniwill Computer Corp: Unknown device 5513
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Region 4: I/O ports at ff00 [size=16]
00:02.6 Modem: Silicon Integrated Systems [SiS] Intel 537 [56k Winmodem] (rev a0) (prog-if 00 [Generic])
Subsystem: Uniwill Computer Corp: Unknown device 4003
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at d400 [size=256]
Region 1: I/O ports at d000 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
Subsystem: Uniwill Computer Corp: Unknown device 5101
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at d800 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:03.0 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Uniwill Computer Corp: Unknown device 7001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dfff7000 (32-bit, non-prefetchable) [size=4K]
00:03.1 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Uniwill Computer Corp: Unknown device 7001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), cache line size 08
Interrupt: pin B routed to IRQ 10
Region 0: Memory at dfff8000 (32-bit, non-prefetchable) [size=4K]
00:03.2 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Uniwill Computer Corp: Unknown device 7001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), cache line size 08
Interrupt: pin C routed to IRQ 10
Region 0: Memory at dfff9000 (32-bit, non-prefetchable) [size=4K]
00:03.3 USB Controller: Silicon Integrated Systems [SiS] SiS7002 USB 2.0 (prog-if 20 [EHCI])
Subsystem: Uniwill Computer Corp: Unknown device 5300
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), cache line size 08
Interrupt: pin D routed to IRQ 5
Region 0: Memory at dfffa000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 91)
Subsystem: Uniwill Computer Corp: Unknown device 5100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at cc00 [size=256]
Region 1: Memory at dfff6000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at dffa0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller
Subsystem: Uniwill Computer Corp: Unknown device 3000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 00000000-00000000 (prefetchable)
Memory window 1: 00000000-00000000 (prefetchable)
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite-
16-bit legacy interface ports at 0001
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS650/651/M650/740 PCI/AGP VGA Display Adapter (prog-if 00 [VGA])
Subsystem: Uniwill Computer Corp: Unknown device 5100
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
BIST result: 00
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at dfee0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at ac00 [size=128]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Thx Andrej
ps: I am offlist, private mail please
ps2: I am in holiday. I check my emails only every 2 days. Sorry.
<P>
bye<br/>
Andrej
</P><P ALIGN="CENTER">
Emlékezz!! <a href=http://draconis.elte.hu/~andrej/writings/guillotine.html>Guillotine!</a><br/>
This work is licensed under a <a href=http://creativecommons.org/licenses/by-nc-sa/1.0>Creative Commons License.</a>
</P>
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-02-05 3:03 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-02-05 3:02 [BUG 2.6.2-rc2-mm1] Maybe in new sisfb driver Meszaros Andras
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).