* [PATCH] SDHCI: Change AMD SDHCI quirk application scope
@ 2015-06-04 14:33 Wan ZongShun
2015-06-04 15:32 ` Borislav Petkov
0 siblings, 1 reply; 6+ messages in thread
From: Wan ZongShun @ 2015-06-04 14:33 UTC (permalink / raw)
To: ulf.hansson, linux-mmc
Cc: linux-kernel, Vincent Wan, Wan ZongShun, Wan ZongShun
From: Vincent Wan <vincent.wan@amd.com>
Change this quirk to apply to AMD Carrizo platform.
Signed-off-by: Vincent Wan <vincent.wan@amd.com>
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Wan ZongShun <linux@mcuos.com>
Tested-by: Nath, Arindam <Arindam.Nath@amd.com>
Tested-by: Ramesh, Ramya <Ramya.Ramesh@amd.com>
---
drivers/mmc/host/sdhci-pci.c | 25 ++++++++++++++++++++++++-
include/linux/pci_ids.h | 1 +
2 files changed, 25 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index f208f20..94f54d2 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -724,14 +724,37 @@ static const struct sdhci_pci_fixes sdhci_rtsx = {
.probe_slot = rtsx_probe_slot,
};
+/*AMD chipset generation*/
+enum amd_chipset_gen {
+ AMD_CHIPSET_BEFORE_ML,
+ AMD_CHIPSET_CZ,
+ AMD_CHIPSET_NL,
+ AMD_CHIPSET_UNKNOWN,
+};
+
static int amd_probe(struct sdhci_pci_chip *chip)
{
struct pci_dev *smbus_dev;
+ enum amd_chipset_gen gen;
smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
+ if (smbus_dev) {
+ gen = AMD_CHIPSET_BEFORE_ML;
+ } else {
+ smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+ PCI_DEVICE_ID_AMD_KERNCZ_SMBUS, NULL);
+ if (smbus_dev) {
+ if (smbus_dev->revision < 0x51)
+ gen = AMD_CHIPSET_CZ;
+ else
+ gen = AMD_CHIPSET_NL;
+ } else {
+ gen = AMD_CHIPSET_UNKNOWN;
+ }
+ }
- if (smbus_dev && (smbus_dev->revision < 0x51)) {
+ if ((gen == AMD_CHIPSET_BEFORE_ML) || (gen == AMD_CHIPSET_CZ)) {
chip->quirks2 |= SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD;
chip->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
}
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 2f7b9a4..cb63a7b 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -579,6 +579,7 @@
#define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 0x7800
#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b
#define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c
+#define PCI_DEVICE_ID_AMD_KERNCZ_SMBUS 0x790b
#define PCI_VENDOR_ID_TRIDENT 0x1023
#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] SDHCI: Change AMD SDHCI quirk application scope
2015-06-04 14:33 [PATCH] SDHCI: Change AMD SDHCI quirk application scope Wan ZongShun
@ 2015-06-04 15:32 ` Borislav Petkov
2015-06-05 1:37 ` Wan ZongShun
0 siblings, 1 reply; 6+ messages in thread
From: Borislav Petkov @ 2015-06-04 15:32 UTC (permalink / raw)
To: Wan ZongShun
Cc: ulf.hansson, linux-mmc, linux-kernel, Wan ZongShun, Wan ZongShun
On Thu, Jun 04, 2015 at 10:33:57PM +0800, Wan ZongShun wrote:
> From: Vincent Wan <vincent.wan@amd.com>
>
> Change this quirk to apply to AMD Carrizo platform.
>
> Signed-off-by: Vincent Wan <vincent.wan@amd.com>
> Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
> Signed-off-by: Wan ZongShun <linux@mcuos.com>
>
> Tested-by: Nath, Arindam <Arindam.Nath@amd.com>
> Tested-by: Ramesh, Ramya <Ramya.Ramesh@amd.com>
> ---
> drivers/mmc/host/sdhci-pci.c | 25 ++++++++++++++++++++++++-
> include/linux/pci_ids.h | 1 +
> 2 files changed, 25 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
> index f208f20..94f54d2 100644
> --- a/drivers/mmc/host/sdhci-pci.c
> +++ b/drivers/mmc/host/sdhci-pci.c
> @@ -724,14 +724,37 @@ static const struct sdhci_pci_fixes sdhci_rtsx = {
> .probe_slot = rtsx_probe_slot,
> };
>
> +/*AMD chipset generation*/
> +enum amd_chipset_gen {
> + AMD_CHIPSET_BEFORE_ML,
> + AMD_CHIPSET_CZ,
> + AMD_CHIPSET_NL,
> + AMD_CHIPSET_UNKNOWN,
> +};
> +
> static int amd_probe(struct sdhci_pci_chip *chip)
> {
> struct pci_dev *smbus_dev;
> + enum amd_chipset_gen gen;
>
> smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
> PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
> + if (smbus_dev) {
> + gen = AMD_CHIPSET_BEFORE_ML;
> + } else {
> + smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
> + PCI_DEVICE_ID_AMD_KERNCZ_SMBUS, NULL);
> + if (smbus_dev) {
> + if (smbus_dev->revision < 0x51)
> + gen = AMD_CHIPSET_CZ;
> + else
> + gen = AMD_CHIPSET_NL;
> + } else {
> + gen = AMD_CHIPSET_UNKNOWN;
> + }
> + }
>
> - if (smbus_dev && (smbus_dev->revision < 0x51)) {
> + if ((gen == AMD_CHIPSET_BEFORE_ML) || (gen == AMD_CHIPSET_CZ)) {
> chip->quirks2 |= SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD;
> chip->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
> }
> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
> index 2f7b9a4..cb63a7b 100644
> --- a/include/linux/pci_ids.h
> +++ b/include/linux/pci_ids.h
> @@ -579,6 +579,7 @@
> #define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 0x7800
> #define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b
> #define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c
> +#define PCI_DEVICE_ID_AMD_KERNCZ_SMBUS 0x790b
KERNCZ?
Also, that device id is used only in sdhci-pci.c so it should be defined
there. Only when multiple drivers/compilation units need it, then it
should go to pci_ids.h.
--
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
--
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] SDHCI: Change AMD SDHCI quirk application scope
2015-06-04 15:32 ` Borislav Petkov
@ 2015-06-05 1:37 ` Wan ZongShun
2015-06-05 9:20 ` Borislav Petkov
0 siblings, 1 reply; 6+ messages in thread
From: Wan ZongShun @ 2015-06-05 1:37 UTC (permalink / raw)
To: Borislav Petkov
Cc: Wan ZongShun, Ulf Hansson, linux-mmc, linux-kernel, Wan ZongShun
2015-06-04 23:32 GMT+08:00 Borislav Petkov <bp@alien8.de>:
> On Thu, Jun 04, 2015 at 10:33:57PM +0800, Wan ZongShun wrote:
>> From: Vincent Wan <vincent.wan@amd.com>
>>
>> Change this quirk to apply to AMD Carrizo platform.
>>
>> Signed-off-by: Vincent Wan <vincent.wan@amd.com>
>> Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
>> Signed-off-by: Wan ZongShun <linux@mcuos.com>
>>
>> Tested-by: Nath, Arindam <Arindam.Nath@amd.com>
>> Tested-by: Ramesh, Ramya <Ramya.Ramesh@amd.com>
>> ---
>> drivers/mmc/host/sdhci-pci.c | 25 ++++++++++++++++++++++++-
>> include/linux/pci_ids.h | 1 +
>> 2 files changed, 25 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
>> index f208f20..94f54d2 100644
>> --- a/drivers/mmc/host/sdhci-pci.c
>> +++ b/drivers/mmc/host/sdhci-pci.c
>> @@ -724,14 +724,37 @@ static const struct sdhci_pci_fixes sdhci_rtsx = {
>> .probe_slot = rtsx_probe_slot,
>> };
>>
>> +/*AMD chipset generation*/
>> +enum amd_chipset_gen {
>> + AMD_CHIPSET_BEFORE_ML,
>> + AMD_CHIPSET_CZ,
>> + AMD_CHIPSET_NL,
>> + AMD_CHIPSET_UNKNOWN,
>> +};
>> +
>> static int amd_probe(struct sdhci_pci_chip *chip)
>> {
>> struct pci_dev *smbus_dev;
>> + enum amd_chipset_gen gen;
>>
>> smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
>> PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
>> + if (smbus_dev) {
>> + gen = AMD_CHIPSET_BEFORE_ML;
>> + } else {
>> + smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
>> + PCI_DEVICE_ID_AMD_KERNCZ_SMBUS, NULL);
>> + if (smbus_dev) {
>> + if (smbus_dev->revision < 0x51)
>> + gen = AMD_CHIPSET_CZ;
>> + else
>> + gen = AMD_CHIPSET_NL;
>> + } else {
>> + gen = AMD_CHIPSET_UNKNOWN;
>> + }
>> + }
>>
>> - if (smbus_dev && (smbus_dev->revision < 0x51)) {
>> + if ((gen == AMD_CHIPSET_BEFORE_ML) || (gen == AMD_CHIPSET_CZ)) {
>> chip->quirks2 |= SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD;
>> chip->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
>> }
>> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
>> index 2f7b9a4..cb63a7b 100644
>> --- a/include/linux/pci_ids.h
>> +++ b/include/linux/pci_ids.h
>> @@ -579,6 +579,7 @@
>> #define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 0x7800
>> #define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b
>> #define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c
>> +#define PCI_DEVICE_ID_AMD_KERNCZ_SMBUS 0x790b
>
> KERNCZ?
>
> Also, that device id is used only in sdhci-pci.c so it should be defined
> there. Only when multiple drivers/compilation units need it, then it
> should go to pci_ids.h.
Boris, I means I put this KERCZ Mircro in pci_ids.h, and I also will
send the other patch to instead the following '0x790b' of codes. I
think it is reasonable, right?
/* Determine the address of the SMBus areas */
if ((PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
PIIX4_dev->revision >= 0x41) ||
(PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
PIIX4_dev->device == 0x790b &&
PIIX4_dev->revision >= 0x49))
>
> --
> Regards/Gruss,
> Boris.
>
> ECO tip #101: Trim your mails when you reply.
> --
--
Wan ZongShun.
www.mcuos.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] SDHCI: Change AMD SDHCI quirk application scope
2015-06-05 1:37 ` Wan ZongShun
@ 2015-06-05 9:20 ` Borislav Petkov
2015-06-05 10:01 ` Wan ZongShun
0 siblings, 1 reply; 6+ messages in thread
From: Borislav Petkov @ 2015-06-05 9:20 UTC (permalink / raw)
To: Wan ZongShun
Cc: Wan ZongShun, Ulf Hansson, linux-mmc, linux-kernel, Wan ZongShun
On Fri, Jun 05, 2015 at 09:37:09AM +0800, Wan ZongShun wrote:
> Boris, I means I put this KERCZ Mircro in pci_ids.h, and I also will
> send the other patch to instead the following '0x790b' of codes. I
> think it is reasonable, right?
No, it means two things:
* why does it contain KERNCZ? What does that mean?
* #define PCI_DEVICE_ID_AMD_<better_name>_SMBUS 0x790b should be in
drivers/mmc/host/sdhci-pci.c as it is used only there.
Thanks.
--
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
--
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] SDHCI: Change AMD SDHCI quirk application scope
2015-06-05 9:20 ` Borislav Petkov
@ 2015-06-05 10:01 ` Wan ZongShun
2015-06-05 13:52 ` Borislav Petkov
0 siblings, 1 reply; 6+ messages in thread
From: Wan ZongShun @ 2015-06-05 10:01 UTC (permalink / raw)
To: Borislav Petkov
Cc: Wan ZongShun, Ulf Hansson, linux-mmc, linux-kernel, Wan ZongShun
2015-06-05 17:20 GMT+08:00 Borislav Petkov <bp@alien8.de>:
> On Fri, Jun 05, 2015 at 09:37:09AM +0800, Wan ZongShun wrote:
>> Boris, I means I put this KERCZ Mircro in pci_ids.h, and I also will
>> send the other patch to instead the following '0x790b' of codes. I
>> think it is reasonable, right?
>
> No, it means two things:
>
> * why does it contain KERNCZ? What does that mean?
The KERNCZ is new AMD SB/FCH generation name, like HUDSON2 is old FCH
generation.
We will adopt 0x790b as device ID since from this KERNCZ gereration.
>
> * #define PCI_DEVICE_ID_AMD_<better_name>_SMBUS 0x790b should be in
> drivers/mmc/host/sdhci-pci.c as it is used only there.
The i2cpiix4.c driver and eMMC driver both will use this device ID
macro, Do you think I should submit two patches synchronously? like
patch1: change i2cpiix4 driver to use PCI_DEVICE_ID_AMD_KERNCZ_SMBUS,
patch2: for eMMC quirk in sdhci-pci.c?
And then the PCI_DEVICE_ID_AMD_KERNCZ_SMBUS can be go into pci ids.h?
>
> Thanks.
>
> --
> Regards/Gruss,
> Boris.
>
> ECO tip #101: Trim your mails when you reply.
> --
--
Wan ZongShun.
www.mcuos.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] SDHCI: Change AMD SDHCI quirk application scope
2015-06-05 10:01 ` Wan ZongShun
@ 2015-06-05 13:52 ` Borislav Petkov
0 siblings, 0 replies; 6+ messages in thread
From: Borislav Petkov @ 2015-06-05 13:52 UTC (permalink / raw)
To: Wan ZongShun
Cc: Wan ZongShun, Ulf Hansson, linux-mmc, linux-kernel, Wan ZongShun
On Fri, Jun 05, 2015 at 06:01:56PM +0800, Wan ZongShun wrote:
> The KERNCZ is new AMD SB/FCH generation name, like HUDSON2 is old FCH
> generation.
> We will adopt 0x790b as device ID since from this KERNCZ gereration.
True story. Strange name that.
> The i2cpiix4.c driver and eMMC driver both will use this device ID
> macro, Do you think I should submit two patches synchronously? like
> patch1: change i2cpiix4 driver to use PCI_DEVICE_ID_AMD_KERNCZ_SMBUS,
> patch2: for eMMC quirk in sdhci-pci.c?
>
> And then the PCI_DEVICE_ID_AMD_KERNCZ_SMBUS can be go into pci ids.h?
If you have all those patches ready, you could do a first patch adding
the PCI ID to pci_ids.h only.
Then follow with the different driver changes, i.e. sdhci-pci.c,
i2cpiix4, and so on and make it clear in the 0/n message that they all
depend on the first one.
Or something along those lines.
Thanks.
--
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
--
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-06-05 13:52 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-06-04 14:33 [PATCH] SDHCI: Change AMD SDHCI quirk application scope Wan ZongShun
2015-06-04 15:32 ` Borislav Petkov
2015-06-05 1:37 ` Wan ZongShun
2015-06-05 9:20 ` Borislav Petkov
2015-06-05 10:01 ` Wan ZongShun
2015-06-05 13:52 ` Borislav Petkov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).