From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
yurovsky@gmail.com, Sascha Hauer <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/8] i.MX7 PCIe related device tree changes
Date: Thu, 13 Apr 2017 06:32:34 -0700 [thread overview]
Message-ID: <20170413133242.5068-1-andrew.smirnov@gmail.com> (raw)
Shawn, everyone:
This series includes changes made to device-tree in order to support
PCIe on i.MX7 platform. They include:
- Bringing 'anatop-enable-bit' property of ANATOP regulators back
and extending it to all of the HW it is applicable to
- Adding GPCv2 node for i.MX7 (which was missing, despite the
irqchip driver for it being in the tree for quite some time)
- Adding a PCIe node for i.MX7
- Adding GPIO expander used by PCIe and enabling PCIe node from
above on i.MX7 based Sabre board
As usual, feedback is welcome.
Thanks,
Andrey Smrinov
Andrey Smirnov (8):
Revert "ARM: dts: imx: Remove unexistant property"
ARM: dts: imx6: Specify 'anatop-enable-bit' where appropriate
ARM: dts: imx7s: Adjust anatop-enable-bit for 'reg_1p0d'
ARM: dts: imx7s: Add node for GPC
ARM: dts: imx7s: Mark 'gpr' compatible with i.MX6 variant
ARM: dts: imx7d-sdb: Add GPIO expander node
ARM: dts: imx7d: Add node for PCIe controller
ARM: dts: imx7d-sdb: Enable PCIe peripheral
arch/arm/boot/dts/imx6qdl.dtsi | 3 +++
arch/arm/boot/dts/imx6sl.dtsi | 3 +++
arch/arm/boot/dts/imx6sx.dtsi | 3 +++
arch/arm/boot/dts/imx6ul.dtsi | 1 +
arch/arm/boot/dts/imx7d-sdb.dts | 39 +++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7d.dtsi | 38 ++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx7s.dtsi | 31 +++++++++++++++++++++++++++++--
7 files changed, 116 insertions(+), 2 deletions(-)
--
2.9.3
next reply other threads:[~2017-04-13 13:33 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-13 13:32 Andrey Smirnov [this message]
2017-04-13 13:32 ` [PATCH 1/8] Revert "ARM: dts: imx: Remove unexistant property" Andrey Smirnov
2017-04-13 13:32 ` [PATCH 2/8] ARM: dts: imx6: Specify 'anatop-enable-bit' where appropriate Andrey Smirnov
2017-04-13 13:32 ` [PATCH 3/8] ARM: dts: imx7s: Adjust anatop-enable-bit for 'reg_1p0d' Andrey Smirnov
2017-04-14 3:28 ` Shawn Guo
2017-04-14 14:33 ` Andrey Smirnov
2017-04-14 15:32 ` Dong Aisheng
2017-04-14 16:08 ` Andrey Smirnov
2017-04-13 13:32 ` [PATCH 4/8] ARM: dts: imx7s: Add node for GPC Andrey Smirnov
2017-04-13 19:03 ` Tyler Baker
2017-04-13 19:18 ` Fabio Estevam
2017-04-13 19:24 ` Tyler Baker
2017-04-13 19:55 ` Fabio Estevam
2017-04-13 20:13 ` Tyler Baker
2017-04-13 20:49 ` Fabio Estevam
2017-04-13 21:20 ` Andrey Smirnov
2017-04-13 21:35 ` Tyler Baker
2017-04-13 22:00 ` Fabio Estevam
2017-04-13 21:19 ` Andrey Smirnov
2017-04-14 3:40 ` Shawn Guo
2017-04-14 15:19 ` Andrey Smirnov
2017-04-14 15:49 ` Dong Aisheng
2017-04-14 15:50 ` Andrey Smirnov
2017-04-13 13:32 ` [PATCH 5/8] ARM: dts: imx7s: Mark 'gpr' compatible with i.MX6 variant Andrey Smirnov
2017-04-14 15:56 ` Dong Aisheng
2017-04-14 16:30 ` Andrey Smirnov
2017-04-13 13:32 ` [PATCH 6/8] ARM: dts: imx7d-sdb: Add GPIO expander node Andrey Smirnov
2017-04-13 22:20 ` Fabio Estevam
2017-04-14 15:25 ` Andrey Smirnov
2017-04-14 3:47 ` Shawn Guo
2017-04-14 15:32 ` Andrey Smirnov
2017-04-14 16:00 ` Dong Aisheng
2017-04-13 13:32 ` [PATCH 7/8] ARM: dts: imx7d: Add node for PCIe controller Andrey Smirnov
2017-04-13 13:32 ` [PATCH 8/8] ARM: dts: imx7d-sdb: Enable PCIe peripheral Andrey Smirnov
2017-04-13 22:23 ` Fabio Estevam
2017-04-14 3:51 ` Shawn Guo
2017-04-14 15:45 ` Andrey Smirnov
2017-04-19 18:28 ` [PATCH 0/8] i.MX7 PCIe related device tree changes Tyler Baker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170413133242.5068-1-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=yurovsky@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).