linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
	yurovsky@gmail.com, Sascha Hauer <kernel@pengutronix.de>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Russell King <linux@armlinux.org.uk>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/8] ARM: dts: imx7d: Add node for PCIe controller
Date: Thu, 13 Apr 2017 06:32:41 -0700	[thread overview]
Message-ID: <20170413133242.5068-8-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20170413133242.5068-1-andrew.smirnov@gmail.com>

Cc: yurovsky@gmail.com
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 arch/arm/boot/dts/imx7d.dtsi | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index f6dee41..bbe23e4 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -42,6 +42,7 @@
  */
 
 #include "imx7s.dtsi"
+#include <dt-bindings/reset/imx7-reset.h>
 
 / {
 	cpus {
@@ -127,6 +128,43 @@
 		fsl,num-rx-queues=<3>;
 		status = "disabled";
 	};
+
+	pcie: pcie@0x33800000 {
+		compatible = "fsl,imx7d-pcie", "snps,dw-pcie";
+		reg = <0x33800000 0x4000>,
+		      <0x4ff00000 0x80000>;
+		reg-names = "dbi", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		bus-range = <0x00 0xff>;
+		ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
+		num-lanes = <1>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
+			 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
+			 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
+		clock-names = "pcie", "pcie_bus", "pcie_phy";
+		assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
+				  <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
+		assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
+					 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+
+		fsl,max-link-speed = <2>;
+		power-domains = <&pgc_pcie_phy>;
+		resets = <&src IMX7_RESET_PCIEPHY>,
+			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
+		reset-names = "pciephy", "apps";
+		status = "disabled";
+	};
 };
 
 &ca_funnel_ports {
-- 
2.9.3

  parent reply	other threads:[~2017-04-13 13:33 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-13 13:32 [PATCH 0/8] i.MX7 PCIe related device tree changes Andrey Smirnov
2017-04-13 13:32 ` [PATCH 1/8] Revert "ARM: dts: imx: Remove unexistant property" Andrey Smirnov
2017-04-13 13:32 ` [PATCH 2/8] ARM: dts: imx6: Specify 'anatop-enable-bit' where appropriate Andrey Smirnov
2017-04-13 13:32 ` [PATCH 3/8] ARM: dts: imx7s: Adjust anatop-enable-bit for 'reg_1p0d' Andrey Smirnov
2017-04-14  3:28   ` Shawn Guo
2017-04-14 14:33     ` Andrey Smirnov
2017-04-14 15:32   ` Dong Aisheng
2017-04-14 16:08     ` Andrey Smirnov
2017-04-13 13:32 ` [PATCH 4/8] ARM: dts: imx7s: Add node for GPC Andrey Smirnov
2017-04-13 19:03   ` Tyler Baker
2017-04-13 19:18     ` Fabio Estevam
2017-04-13 19:24       ` Tyler Baker
2017-04-13 19:55         ` Fabio Estevam
2017-04-13 20:13           ` Tyler Baker
2017-04-13 20:49             ` Fabio Estevam
2017-04-13 21:20               ` Andrey Smirnov
2017-04-13 21:35               ` Tyler Baker
2017-04-13 22:00                 ` Fabio Estevam
2017-04-13 21:19     ` Andrey Smirnov
2017-04-14  3:40   ` Shawn Guo
2017-04-14 15:19     ` Andrey Smirnov
2017-04-14 15:49       ` Dong Aisheng
2017-04-14 15:50         ` Andrey Smirnov
2017-04-13 13:32 ` [PATCH 5/8] ARM: dts: imx7s: Mark 'gpr' compatible with i.MX6 variant Andrey Smirnov
2017-04-14 15:56   ` Dong Aisheng
2017-04-14 16:30     ` Andrey Smirnov
2017-04-13 13:32 ` [PATCH 6/8] ARM: dts: imx7d-sdb: Add GPIO expander node Andrey Smirnov
2017-04-13 22:20   ` Fabio Estevam
2017-04-14 15:25     ` Andrey Smirnov
2017-04-14  3:47   ` Shawn Guo
2017-04-14 15:32     ` Andrey Smirnov
2017-04-14 16:00     ` Dong Aisheng
2017-04-13 13:32 ` Andrey Smirnov [this message]
2017-04-13 13:32 ` [PATCH 8/8] ARM: dts: imx7d-sdb: Enable PCIe peripheral Andrey Smirnov
2017-04-13 22:23   ` Fabio Estevam
2017-04-14  3:51   ` Shawn Guo
2017-04-14 15:45     ` Andrey Smirnov
2017-04-19 18:28 ` [PATCH 0/8] i.MX7 PCIe related device tree changes Tyler Baker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170413133242.5068-8-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=yurovsky@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).